sainsmart 5 inch tft lcd 800x480 touch screen display for sale

ER-TFTM050-4 is 480x272 dots 5" color tft lcd module display with SSD1963 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 6800, 8080 8-bit /9-bit/16-bit/18-bit/24-bit parallel interface. Built-in MicroSD card slot. It"s optional for 4-wire resistive touch panel with controller,capacitive touch panel with controller,font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable.Mounting on board by default.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

Trade_Spotting is a well-known online brand specialized on development board and professional test equipments. As a professional and reliable seller, we source from SainSmart’s manufactory directly before testing and packing.

New Raspberry Pi Starter Kit 3 (with style=”margin: 0px; list-style: none; color: #2f2f2f; font-family: Verdana; font-size: 12pt; background-color: #ffffff;”>$56.99

1. We accept payment via PAYPAL ONLY which provides full-scale buyer protection policy up to $500. We only ship to confirmed PAYPAL addresses.Please makesure payment address in PayPal is correct.

This Bridgetek/FTDI EVE development kit includes a 5" EVE display module with a large bezel. This kit is perfect for demonstrating the EVE module (CFAF800480E2-050SC-A2) or the base display (CFAF800480E2-050SC), simply plug the included Seeeduino to a 5v power source!

The included display is sunlight-readable, has extremely wide viewing angles, large color depth, and the touchscreen glass extends past the edge of the display for smooth mounting.

This 7.0" TFT LCD Module can be easy controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems which require display high quality colorful image. The Module used SSD1963 LCD controller with 5 inch LCD module with touchpad. This LCD has a superior display quality and super wide viewing angle. The LCD has a SD slot, SPI flash footprint.

The model only includes the display PCB and not the LCD display.https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack/downloadsI take no credit for the design of this work. ...Thank you Adafruit for making electronics...

Someone expressed some interest in a case for this display on Facebook. So I bought one and designed the display very quickly. I will more than likely make something better, but this works for now. I went to Ace Hardware for the bolts and nuts that...

A case for AdaFruit"s "HDMI 4 Pi: 5" Display w/Touch and Mini Driver - 800x480 HDMI", Product ID: 2109.I bought this, but couldn"t find a case for it. So decided to learn Fusion 360 to make one.It requires a bunch of M3 and M2.5 bolts, nuts, and...

PARTS: Adafruit HDMI 5" Display Backpack - With Touch (can substitute for the one without touch ) Adafruit Powerboost 1000 6600 mAh Lithium-Ion Battery Pack USB hub to split the power Tactile On-Off Switch X-Mini UNO speaker HDMI right-angle adapter...

... but the board is not fixed to the display itself, later I will made a RaspberryPi box to mount rear it. To get more information about the display or to buy it please refer to http://www.watterott.com/en/5-800x480-HDMI-Display-with-resistive-touch

And it fit for the 5 inch 800x480 HDMI Touch Screen which can be bought from this link in ebay: http://www.ebay.com/itm/5-Inch-800-480-HDMI-Touch-Screen-LCD-Display-Acrylic-Bracket-for-Raspberry-Pi-3-/321952458012?ssPageName=STRK:MESE:IT Print...

The screen module isn"t totally symmetrical, thus this case isn"t either. The case design does a nice job of protecting the module while permitting easy access to the...

The screen module isn"t totally symmetrical, thus this case isn"t either. The case design does a nice job of protecting the module while permitting easy access to the...

The display is a 5 inch HDMI TFT touch display for the Raspberry Pi. This is also available on ebay or China. Printed must be the frame and the two holders for the display. The holders are fastened with M2.5x8 screws.

The source SCAD file is maintained on github: Screws: Vesa Mount: M4 (length depends on pi & pi accessories) Display: M3x8 Pi: M2.5x6 Standoffs for Vesa: Short ribbon cables and 90 degree adapters for the HDMI and USB for the display: Search "hdmi...

Simple wall mount with 2 screws for Waveshare touch model H **Compatible HDMI LCD cases:** [5inch HDMI LCD (H), 800x480](https://www.waveshare.com/5inch-hdmi-lcd-h.htm) If you find this useful please make a small donation. ...

accurate CAD model of UPC "6013801500024" from the SainSmart Raspberry Pi 3 Model B Ultimate Kit with 5 inch LCD (Red&White Case)https://smile.amazon.com/gp/product/B01FHEBIE0/

Raspberry Pi Shield - LCD-Touch-Display, 5":https://www.reichelt.de/Erweiterungsboards/RASP-PI-5TD/3/index.html?ACTION=3&LA=2&ARTICLE=192129&GROUPID=6669&artnr=RASP+PI+5TD&SEARCH=%252A Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2...

Simplified model of a 3.5 inch LCD for Raspberry Pi. ...I used the usb connectors from this model: Raspberry Pi 3 Model B Reference Design Solidworks CAD Raspberry-Pi Raspberrypi Rpi

Case für ein ELECROW 7 Inch 1024*600 HDMI LCD Display with Touch Screen. Habe das Gehäuse für meinen Kossel-XXL Delta Drucker mit Touch-UI Octopi entworfen, da ich leider kein passendes Gehäuse finden konnte. Benötigte Schrauben: 4x 2,9x5 mm...

The model only includes the display PCB and not the LCD display.https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack/downloadsI take no credit for the design of this work. ...Thank you Adafruit for making electronics...

This screen connects via HDMI and has an USB connection for power and touchscreen functionality. It attaches using bolts and nuts (2 x M3-30mm, 4x M3-16mm, 1x M4-40mm, 6 x M3 nuts, 1 x M4 nut). Additionally, it uses a 15x15 mm alu square profile for...

ER-TFTV043A3-7 is 4.3 inch 800×480 IPS tft lcd display with wide view angle,USB port capacitive or resistive touch panel designed for Raspberry Pi or various systems.Souce from EastRising/buydisplay.com

No, seriously!! The Mega is brilliant at what it does, but if you buy a DUE after you buy a MEGA, you will wish you got the DUE sooner, and your Mega will start gathering dust............. the difference is THAT dramatic! If you are tempted to go down the SPI display route, you DEFINITELY want a DUE, not a Mega! Simple reason being, the SPI speed of the Mega is 4Mhz? You can squeeze 42Mhz out of the DUE SPI, AND you can drive it via DMA, the Mega has no DMA.

If you INSIST on going down the Mega route, it would be advantageous to get an intelligent display just to make up for inadequacies of the Mega, some of these are overcome when using the Due, so a dumb display is less of a performance hit.

Is 7" one of your Mandatory design choices? The reason I ask is that the youtube video of the 4D systems display you saw was a 4.3" device and you can get those for about $50....

Isn"t exactly mandatory, but I would like to have a big screen, I plan to hang it on the wall right on my bed, to use as an alarm clock / weather checking station, and as I already use, with voice recognition and as a webserver to control my house automation (ligths, TV"s, HT"s, etc.).

The inteligent 4.3" display goes for US$ 150,00 so no big difference, but that "dumb" one from the video, is really cheap. How your friend managed to control it?

And about the standard UTFT devices, I didn"t find any 7" inch, and the processing is left all for the Arduino right? I don"t know if I"m ready to the task, the screens I want to make are not that hard if it"s done graphically, but it"s alot harder if done by coding, my HTML code as almost 250 lines for it...

My understanding is that the official display has fine backlight control, but with the bezel it"s too large for the enclosure I have in mind. The cheap bare screens fit in the space, but don"t have backlight controls (for instance, 800x480 SainSmart with ribbon to HDMI/VGA board). There"s another style of reasonably cheap module with the board integrated on the back of the display and HDMI and USB power plugs coming off the side, some of these have PWM dimming, but having those rather thick cables coming out from the side will be hard to route.

[I may just go with an Adafruit 5" Display Backpack. It apparently has a PWM input for dimming control, and I can just use black matting to frame the space, rather than trying to wedge the 7" unit in there with negative clearance.]