adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This version does not have touchscreen attachedIt"s exactly the same TFT display as PID 1596 but without the resistive touch panel so it is a little less expensive.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V

For that reason, we are carrying it only as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller (including Arduino & friends) If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don"t have any support or tutorials for that purpose.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a user interface. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This version has a 4-wire resistive touchscreen attached It"s exactly the same TFT display as PID 1680 but with a resistive touch panel so it is a little more expensive.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V

For that reason, we are carrying it only as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller (including Arduino & friends) If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don"t have any support or tutorials for that purpose.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

desertcart is the best online shopping platform where you can buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] to and more cities in INDIA. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] speedily without the hassle of shipping, customs or duties.

desertcart buys Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V.

For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller (including Arduino & friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don"t have any support or tutorials for that purpose.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

desertcart is the best online shopping platform where you can buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] to and more cities in Armenia. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] speedily without the hassle of shipping, customs or duties.

desertcart buys Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

desertcart is the best online shopping platform where you can buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] to and more cities in Armenia. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] speedily without the hassle of shipping, customs or duties.

desertcart buys Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Adafruit 5.0" 40-pin 800x480 TFT Display without Touchscreen [ADA1680] from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

This LCD is a high resolution 800X480 IPS TFT display. The IPS technology delivers exceptional image quality with superior color representation and contrast ratio at any angle. This 24-bit true color Liquid Crystal Display is RoHS compliant and does not include a touch panel.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV"s, GPS"s, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.

This is a "raw pixel-dot-clock" display and does not have an SPI/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V.

For that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That"s the best way to interface this display to just about any microcontroller (including Arduino & friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don"t have any support or tutorials for that purpose.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

It might help if I give more scope for my application. My current project runs on a PIC32MX 80MHz,output is to a320x 240 TFT, coded in C and using Mikro C and their closed TFT library. The code is over 5,000 lines and has the following IC2 sensors, light, BME280 (humidity, temp, pressure), DS3231 RTC, also connected is a GPS read by a UART, user control is via rotary encoder and center push switch. The user selects one of 7 top level menu/screens and the display then updates for the selection, this requires most of the display to update. The display can be set to show updating graphs for temp, humidity and pressure for last 24 hours and 7 days. The problem is there is now too much data to show on a 320 x 240 screen, it really needs a larger screen with higher resolution, the PIC32 with Mikro TFT library is on it"s limit updating the current screen so a faster CPU with better TFT libraries is needed or make a big change and move to a Rpi. The actual screen updates are not that fast after each screen is initially redrawn, I have limited updates to only parts of the screen to keep flicker/updates less noticeable. The only constant screen updating is the time being shown in larger type font at the top of the screen and this changes only once /sec.

So for the question of preferred library and or screen, I should have really asked what Teensy 3.6 libraries are available for any controller type suitable to drive a 5" TFT display at 800 x 400?

Looking on Adafruits webpage they have the RA8875 Driver Board for 40-pin TFT Touch Displays - 800x480 Max and a library available which might work with the Teensy, then add their 5.0" 40-pin TFT Display - 800x480 with Touchscreen. But it would be good to know if alternative Displays exist that have been tested and any better libraries written to drive them, that work with Teensy. I don"t have the coding skills to write my own Libraries or modify existing ones as I only started coding in C last year.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

Then you"re going to have to jump into the deep end with the screen code. Buy a high resolution screen like this Adafruit 5" one: 5.0 40-pin TFT Display - 800x480 with Touchscreen : ID 1596 : $29.95 : Adafruit Industries, Unique & fun DIY electronics and kits They have the same resolution in a 7" screen or a smaller screen with smaller resolution. This is about as high as you want to go on an Arduino. Any more pixels on the screen and you will spend absolutely seconds waiting for the screen to update.

Then you need a library to drive the board. The Adafruit one works but I recommend the one Sumotoy on Github has written: GitHub - sumotoy/RA8875: A library for RAiO RA8875 display driver for Teensy3.x or LC/Arduino"s/Energia/Spark This allows you to access most of the features of the RA8875 chip to off-load some of the graphics work. He also has recommendations for cheaper screens to buy from China

But then mounting those Adafruit screens is difficult. There"s no screw holes or tabs to allow them to go into a pre-built box. I 3D print my enclosures now. That takes a certain amount of experience with 3D design and the printer"s foibles to be able to make the features that hold the screen securely. Duct tape is fine for a desk-bound prototype but making something portable is actually quite difficult.

adafruit 5.0 40-pin 800x480 tft display without touchscreen made in china

I changed the Adafruit libraries for TFT: GFX , TFTLCD and TouchScreen. I join all in this one library, the library SPFD5408, to avoid problems with duplicate libraries and enables also have the original library Adafruit ready for use in other projects with another TFT hardware.