how to remove oil from lcd screen brands

I agree with KraziKid. When cleaning oils off one of these screens stick with pure or slightly diluted isopropyl alcohol and a lint-free cloth with the cloth slightly dampened so that you don"t get rivulets of liquid trying to run down the face of the screen. The microfibre cloth is nice, but not absolutely necessary. NEVER use a paper towel. They will put microscratches on the screen. I know this for a fact. I"ve examined a newly unwrapped LCD screen under a loupe right after a store manager cleaned it with a dampened paper towel. Clean by stroking GENTLY across the surface from top to bottom in overlapping strokes. Turn the cloth frequently (at the end of each stroke) so that dirt picked up on one pass isn"t carried over to the next stroke to potentially scratch the screen surface.

Someone recommended "glass cleaner". That wasn"t very specific, and following that advice could cause problems with some LCD screens. Glass cleaners vary considerably in composition. The ones that contain amonia, among other chemicals, are NOT recommended by manufacturers for use in cleaning most of these screens. Every LCD monitor I"ve investigated came with a manual that included instructions on how to clean the screen.

Oh yes, I forgot to mention the most important and final step to take in cleaning an LCD screen after someone has put his greasy fingerprints on it. Kill the perp, then nail his carcass to a nearby wall. Place a sign around his neck which explains why he has been placed in such an embarrassing position. The cleaning job is not done until you have performed this final step.

I buy a product for cleaning sunglasses called Viva; I’ve used it for several years and it works great. For dusting the screen, I’ve used the anti-static anti-cling sheets you would otherwise use in a dryer. They also do well with no ill effects.

I’ve used “Glass Plus” on my laptop and my 19″ LCD for about four years now. I also use the brown paper towels that are on a roll; they are used in the dispensers in bathrooms. I get the end of the roll before it is discarded.

Sorry all, but I have one related question rater than a tip. I am interested in advice on how to clean the “solid” stuff from the LCD screen. You see, it’s that during all these years, there were many “little dots” of such stuff (like small coagulated pieces of coffee etc.) that I accidentally spilled or whatever, and now they’re spreading all over my screen.

I use terry cloth dust cloths that are like magnets for dust and dirt. They are reusable and environmentally smart. I have seen them in stores, but bought mine from a catalog. You can’t go wrong.

I apologize for not having a tip, rather I do have a question. I had a LCD TV which used to look all nice and perfect. All of the sudden a big yellow stain appeared on it. I came to find out that my mother came to visit, she decided to help out with the cleaning and she applied Windex to my TV. Ever since, we haven’t been able to remove this stain. Does someone know if there is a way to remove this stain? Or am I stuck with it forever?

There don’t seem to be any reports of success for resolving this issue, so if you try any of these ideas, please let us know how it goes! Here are a few ideas that might work:

3) Put a couple drops of cooking oil on a soft cloth and polish the area. Add more oil to the cloth as needed. Any oil should be fine – olive, coconut, canola, etc.

4) This idea seems promising: wipe the area with an acrylic cleaner, such as Peek polish. If the coating on the screen has been damaged, removing the coating should resolve the issue, which is why this might work. A new anti-glare coating can be applied afterward.

Of course, if you can’t fix the problem, you might be able to replace just the screen. It’s not a cheap option, but probably better than replacing the whole device. Good luck!

Someone at Target told me that a little drop of Dawn dish soap and water works great. I’ve been cleaning my LCD TV that way for a while now and it looks and works great.

I’m got a problem that few, if any, others will have encountered: in a modern museum setting, we have several large LCD monitors that are routinely exposed to small quantities of water mist (from a simulated flash flood exhibit). During design, the quantities of water were deemed insignificant, but over time we’ve found the build-up of mineral deposits (“hard water stains”) in the form of droplets on the screens has become a problem. Does anyone have any suggestions? I’m reluctant to try any of the acidic, off-the-shelf hard water stain removers that you might use in your shower, but I’m open to any suggestions.

Manufacturers like Apple recommend cleaning with a soft cloth and a solution of water and no more than 50% isopropyl alcohol. I personally clean my screen with a microfiber cloth and water. Microfiber cloths are commonly sold as eyeglass cleaners, it is designed to wipe up dust and dirt. With the right cloth, you only need water.

I recently purchased a wide-screen LCD TV and was concerned about what to clean the screen with. I spent hours Googling the topic and here is a synopsis of what I found:

Another pretty good product to clean LCD screens with is a product called Clearview. It is an isopropyl alcohol based product which contains no ammonia. I tried it on my 40 inch LCD TV and it did a nice job on the screen.

Vinegar is not good for your LCD. I buy these little wipes at Wal-Mart in the electronics section. It is an alcohol solution in an individually wrapped packet. They work well and you get like 20 or 30 for $1.97 best of all they are good to leave in your laptop bag for on the go cleaning since they are individually packaged.

If its a larger amount of paint, you may have to buy a new LCD as removing a large amount of dried paint physically will damage the screen, and chemicals that dissolve the paint will probably melt everything, including the screen.

I was carrying my 32″ TV down to the basement and slipped on the stairs. The TV dragged across the white stair rail and left 2 large white paint marks on the LCD screen. I found your tip, tried the vinegar (it worked somewhat). I then tried the alcohol, in the mixture you stated. The alcohol worked great and left no marks whatsoever. You could never tell it happened. Thank you very much!!!

First, wipe with a damp cloth that has just a drop of Dawn on it, follow with a cloth with very little isopropyl alcohol (gets any fingerprints and smudges real good), and then follow with a dampened cloth of just water. Cloths I used were just cotton pillowcases.

I was able to clean my TV. I finally took it apart (literally). The whole screen, I separated the two plastics & just wiped and used a blow-dryer to dry the damp. It worked; the TV looks like nothing ever happened.

Why is there all this confusion???? I’ve been using wipes sold at Walmart that are specifically made to clean LCD screens and they’ve always worked great!!!

God, just spend a couple bucks for these. A lot of stores sell LCD wipes. I don’t understand why anyone would claim they damage your screen as they do not!! However-for badly spotted screens (made by soft drinks, etc), one might want to use something a bit more major. But for general cleaning, use the wipes.

I don’t recommend Monster cleaner like someone did; that stuff streaks to all heck and takes forever to come out. I made the mistake of using a damp paper cloth and though luckily, I haven’t scratched the TV screen at all, it left a little bit of white – what I’m assuming are paper towel bits – embedded into my screen. I’ve tried washing them out gently and rubbing them out and whatnot, but they just aren’t coming off. Any suggestions?

This is often the case with the internet and open forums like this. You have to remember that by posting or reading a forum like this, you are posting and reading to/from all who are doing the same thing. Not everyone who posts an answer will be an expert. So the one that is “RIGHT” is the one you think is “RIGHT” and that’s the problem; you have to have know the answer to know which one is “RIGHT,” otherwise it’s take your pick and hope the one you pick is OK. But I would always go with some form of logic and ask:

What is in most commercial cleaning LCD products? Answer: “NOT vinegar.” So most problems on the posts saying, “NOT vinegar,” are right. That said, if the screen is glass, then vinegar is good.

I did have to buy a General Electric LCD cleaner that came with a liquid solution and just applied the spray onto a special fiber that the cleaner had, and just wiped my 24″ LCD screen with circular motions all around the monitor. It looks just as if it were new, not even when sunlight hit the monitor did I ever see a stain or anything like it.

I just used Windex, sprayed on a paper towel, and now have swirls and smears on my screen. Is it okay to use the LCD wipes (i.e., will it resolve the problem)?

I just saw a video regarding this topic on YouTube. The person in the video advises isopropyl alcohol (90%) + distilled water (10%) mixture coupled with a sprayer and a cleaning cloth that is used for cleaning camera lenses.Bad idea. camera lenses are made of glass while LCD screens are plastic and need something not so strong.

I tried monster cleaner and it made a mess, taking three months to get the streaking mess off my TV. Windex doesn’t work; the best bet is distilled water and a microfiber towel. Monster is a rip-off big time, they changed it so it is no longer a good product.

Use a small bowl and put a drop of Dawn in it. Add warm water to create foam. Then, dip your microfiber cloth or what you use to clean your screen. Gently wipe, then take another damp rag to rinse it with just plain water, and dry. You have a clean screen. This is what Sony told me to do and it works. I have had no issues in three years of using this method.

I just sprayed antibacterial Pledge on my Sanyo LCD to dust it and the color in my tv is basically all green. I didn’t know there was a certain way to clean these TVs. Will the color go back to normal? What do I do?

Vinegar is an acid!! How can the internet be full of dumb people telling others to do this. If you clean your screens with vinegar, even if you dilute it, you will damage it in the long run. If you don’t have a product made for it, just use water.

Take a clean bowl. Put some vinegar in it. Add a touch, I mean one single drop, of regular Dawn in it. Use a good paper towel (not the scratchy brown ones) and use it on LCD. This will clean and smudges, dirt and most particles. Might have to give it a few wipes. Always dry ASAP after you use this method other wise it leave some streaks. As long as you clean and dry ASAP it will get your screen crystal clear.

Yes, LCD screens for computers or TVs are usually replaceable. There are also some easy methods you can use to try to fix the scratch yourself, such as with a pencil eraser, Vasaline, or a scratch repair kit.

I’m trying to read everything on this page. But, I cannot get the specific answer that I want. Sorry, but I do have a question and I want a relevant answer. The LCD on my laptop has a stain from hair dye, and I cannot remove it by using alcohol. I need help; any suggestions?

What you need to do is determine what products can be used to remove hair dye, then determine which of those products are safe to use on an LCD screen. Here is an article that lists some products that can remove hair dye stains from some surfaces: How to Remove Hair Dye from Towels. Look to see which of the ingredients you have, then search online to see if they are safe to use on an LCD screen.

I want everyone to know that vinegar on a LCD TV screen is an extremely bad idea as it will eventually cause a yellowish stain on the screen and it won’t come off, so FYI, never use vinegar on a LCD T.V screen. Use a glasses cleaner, or if you don’t have any, distilled water works too; just make sure you use the microfiber cloth that should come with the TV as it came with mine, and it works great on my screen, but use it only n the screen as using it on household appliances might ruin it and washing it might ruin it as well.

Well, I have a question about the caller ID window on my new Panasonic phone. I made a mistake and got a few drops of liniment and Cutter insect repellent on the clear caller ID window. Now, spots are on the front of it and nothing removes it. Does anyone have any idea how I can remove those spots? I am most appreciative of any help you may offer. Thanks.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

After I"d done that it looked really bad but then I went at it with a soft cotton cloth and just kept gently going over and over and over it. After about 30 mins it stopped looking like I was just spreading it around and actually started to clean up. Fast forward another hour and it looked like a normal telly that had been badly cleaned.

So I think another couple of good cleaning sessions with a good clean cotton cloth and I might be there, it"s watchable now so much so you can only really see any smudges/marks when the screen is off.

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

Use a non abrasive cleaning solution, diluting isopropyl alcohol (not rubbing alcohol, as it may contain oil) into a solution of 50% alcohol and 50% with distilled water water (or purified/bottled water). You could also buy a cleaning solution that does not contain bleach, ammonia, or vinegar.

Before you start, power-off and unplug your monitor. Spray the cleaning solution on a soft cloth (for example an old T-shirt), lint-free microfiber cloth, or some other very soft cloth. A large cloth is best, since it will help reducing the risk of leaving streaks across the display from finger pressure.

Starting from the top, wipe the screen in one direction until you have cleaned the entire screen. Apply light, but distributed pressure. Repeat if necessary. Let it air dry.

As the weather warms, it"s time for everyone"s "favorite" pastime: spring cleaning. While you"re dusting off the shelves and shoveling out a winter"s worth of detritus, spare a moment to check your TV. Dust and grime can accumulate there, and over time it can become more and more noticeable. And if you have children, there may be an array of fingerprints and other smears on the screen.

The short version? Don"t use liquids, don"t press too hard, don"t use any traditional cleaners. Microfiber cloths are good, but be gentle. Modern TVs are predominantly plastic and therefore far easier to scratch than windows or your phone.

Want the longer version? Here"s what the top TV manufacturers say about cleaning their screens:Cleaning your 4K, OLED, or LED TV screen with a soft, dry cloth is recommended. The goal here is to avoid scratching the screen. Gentle, circular motions tend to give better results, since the circular motion hits each area from several angles in a single swipe.

To clean the frame and screen, gently wipe it with a microfiber cleaning cloth. Make sure to wipe the TV frame and screen as gently as possible. TV screens are fragile and can be damaged when pressed too hard.

Important: Never use any type of window cleaner, soap, scouring powder, wax, or any cleanser with solvents such as alcohol, benzene, ammonia, or acetone. Never use abrasive pads or paper towels. If you do, you can scratch the screen or strip the anti-glare coating off the screen and cause permanent damage. Never spray water directly onto the TV. Make sure to wipe the TV as gently as possible. TV screens are fragile and can be damaged when pressed too hard.Gently wipe the screen or the exterior with a dry, soft cloth, such as an eyeglass cleaner.

For inks from oil markers on the screen, soak a cloth in a non-soap synthetic cleanser diluted (by less than 1% ) with water. Squeeze the cloth tightly to eliminate excess liquid, then wipe gently to remove the ink. Use non-soap cleansers cautiously because it may cause environmental problems when disposed improperly.

So why not Windex? Regular Windex is formulated for glass windows, plus a few other surfaces. It contains ammonia and alcohol, not the friendliest of chemicals. S. C. Johnson doesn"t explicitly say not to use Windex on TVs, but it offers Windex Electronics wipes and cleaners, so infer what you will. The better screen cleaners will clearly state that they do not contain alcohol or ammonia.

At last count, I found a billion companies making TV screen cleaners. Almost all of these are something like 99 percent water, 1 percent other stuff. Years ago I tested a handful and found them, on average, to work well enough. If you don"t have luck with a simple cloth and possibly distilled water, a screen cleaner is worth a try, and as a bonus you can also use it for your laptop, tablet and cell phone screens. Plus, they come with a microfiber cloth. If they don"t clearly state they don"t contain alcohol and ammonia, however, I would skip them.

So yeah, cleaning your TV is a good idea. But just remember that they"re exceptionally fragile. Why risk marring their surface by using cleaning methods the companies themselves don"t advise? If you damage your screen with cleaners, you won"t be able to fix it.

My advice? Get a nice microfiber cloth (if your TV didn"t come with one), and use that. If that doesn"t fix your smudges, try a cloth moist with water. Don"t press too hard. There"s less than a millimeter between your finger and a broken TV.

Screen cleaning kits are fine, though most people won"t need them. Remember, like all TV accessories, the store is selling them because they probably make more profit on that $20 kit than on a $500 TV.

As well as covering TV and other display tech, Geoff does photo tours of cool museums and locations around the world, including nuclear submarines, massive aircraft carriers, medieval castles, epic 10,000 mile road trips, and more. Check out Tech Treks for all his tours and adventures.

We’ve all lived that moment when our computer monitor is met with the perfect stream of daylight, and the thought crosses your mind as you squint to see through the scattered fingerprints and dust: “Whoa, when was the last time I cleaned this thing?”

There are a few different types of screens, and your cleaning options vary between the surfaces. It’s critical to know how to clean your specific screen because, if you do it wrong, the active ingredients in the cleaning agents could affect the display of sensitive crystals or cause permanent damage in the form of streaks and scratches.

It doesn"t hurt to wipe down the surface of your keys and your mouse at the same time you"re cleaning your screen, since many germs are housed on those surfaces. Using a dry microfiber cloth is always safest when it comes to removing dust.

Are there different considerations for cleaning a Mac screen versus a PC screen? In short, yes. We know that there are hundreds of different computer and monitor models to consider, but in general, screens are either backlit LED made with LCD (liquid-crystal display) pixels, or a non-LCD glass-coated surface. And just to note, some of the newer matte glass screens are nano-texture glass, which require a special polishing cloth from the manufacturer and should be cleaned with nothing else.

LCD screens are more susceptible to damage by cleaning agents, but because they’re commonly used on PC laptops and standalone computer monitors, there are lots of easy-to-use products available to clean them. It’s not that they’re hard to clean, but you’ll have to be careful and diligent so you don’t damage the surface or any of the LED elements. Any cleaners that include ammonia will leave a film. Soap and water can cause damage. It’s always safest and most effective to use an LCD cleaner free of alcohol, ammonia and acetone to clean an LCD screen, but if you need a DIY fix, you’ll be successful if you use a microfiber cloth that’s sprayed lightly with a mix of vinegar and distilled water.

Most Mac computer screens are glass-coated and can be cleaned and resolved streak-free more easily than LCD products using glass cleaners, like Windex, or a cloth lightly sprayed with rubbing alcohol. Nano-texture glass screens on products like the Apple Pro Display XDR or iMac require use of the special polishing cloth sold by Apple.

For fingerprints and smudges, spray 70% isopropyl alcohol onto a cloth, or use a pre-moistened alcohol wipe or a Clorox Disinfecting Wipe, to clean non-porous surfaces like the screen; do not use bleach.

To clean spots and streaks on the surface of the screen, mist an LCD cleaning spray onto a dust-free side of your microfiber cloth; an easy DIY solution is 1:1 parts of white vinegar and distilled water.

To many people, clean means water, but water and electronics don’t mix. At all. Follow these these tips which show you how to clean a TV screen without harming yourself or it.

Use water to lightly moisten a clean, soft, dry cloth, and then rub the screen gently. Do not let water run down screen or enter behind screen frame. Wipe with dry cloth after cleaning.

WARNING: Never use any type of window cleaner, alcohol, soap, scouring powder, or any cleanser that contains solvents. Never use abrasive pads or paper towels. These can scratch the screen (and even dissolve special coatings on it) causing permanent damage.

#HisenseHack: Like any technology that moves fast, trying to get your head around the world of TVs can be difficult. Check out our guide to the key things you need to consider when purchasing a new model.

Dell currently does not have any knowledge of results from exposure to UV-C light for any of Dell"s products. While we are aware of products in the marketplace that use UV-C for cleaning items such as cell phones, we have no independent data or information regarding its use, efficacy, or issues that may arise. We have been unable to find any specific industry aging tests that are defined exclusively for exposure to UV-C. Dell cannot make a recommendation concerning use of UV-C light due to a lack of sufficient and standardized test data. Dell"s approved cleaning recommendations continue to be the other methods listed on this page.

We understand customers may have questions about cleaning and disinfecting options for their Dell products. The guidance below applies to all Dell-branded PCs, monitors or display screen, docking stations, keyboards, and mouses.

Turn off the device that you plan to clean and disconnect AC power. Also remove batteries from items like wireless keyboards. Never clean a product while it is turned on or plugged in.

Moisten a microfiber cloth with a mixture of 70% isopropyl alcohol / 30% water. The cloth should be damp, but not dripping wet. Excess moisture should be removed if the cloth is wet before wiping the product. Using any material other than a microfiber cloth could cause damage to your product.

Gently wipe the moistened cloth on the surfaces to be cleaned. Do not allow any moisture to drip into areas like keyboards, display panels, etc. Moisture entering the inside an electronic product can cause damage to the product. Excessive wiping potentially could lead to damaging some surfaces.

Customers may experience some visible cosmetic changes to finishes over time as a result of the cleaning process outlined above on some surfaces. Other cleaning chemicals are very harsh and will damage surfaces. Avoid using any of the following chemicals or products containing these chemicals:

Using any of the chemicals that are listed above will cause permanent damage to some product surfaces. By following the steps outlined in this document, you can minimize the risk of damage.

We understand customers may have questions about cleaning and disinfecting options for their Dell Storage, Networking, HCI, and Server products. The guidance below will help address concerns.

Warning: If the business requirements call for sterilization for an abundance of caution, Dell Technologies highly recommends engaging a professional cleaning company that specializes in sterilizing data center equipment. If engaging a professional cleaning company that specializes in sterilizing data center equipment is not possible, Dell Technologies recommends that customers exercise extreme caution when sterilizing and disinfecting their Dell Storage, Networking, HCI, and Server products by using the following steps:

If your data center procedures require turn off prior to cleaning external surfaces, follow Dell Technologies published procedures for safely turning off data center equipment, to ensure data integrity.

If the equipment must remain operational while external surfaces are cleaned, use extreme caution in exposing powered equipment to any moisture and take all proper and necessary precautions when handling powered equipment that has been exposed to moisture.

Cleaning must be limited to external surfaces such as handles and other common touchpoints. Do not open cabinet and chassis doors or attempt to clean any internal components.

Never spray any liquids directly onto or into any product. Do not expose any internal components of Dell Technologies data center products to moisture.

To clean external surfaces such as handles and cabinets, moisten a microfiber cloth with a final concentration of 70% isopropyl alcohol by volume. The cloth should be moist, but not dripping wet. Excess moisture should be removed if the cloth is wet before wiping the exterior and handles of the product, keeping clear of power leads and permanent wiring. Using any material other than a microfiber cloth could cause damage to your product.

Gently wipe the moistened cloth on the surfaces to be cleaned. Do not allow any moisture to drip into areas like keyboards, display panels, vents, etc. Moisture entering the inside an electronic product can cause damage to the product. Excessive wiping potentially could lead to damaging some surfaces.

Customers may experience some visible cosmetic changes to finishes over time as a result of the cleaning process outlined above on some surfaces. Other cleaning chemicals are very harsh and will damage surfaces. Avoid using any of the following chemicals or products containing these chemicals:

Using any of the chemicals that are listed above will cause permanent damage to some product surfaces. By following the steps outlined in this document, you can minimize the risk of damage.

This article describes how to clean your laptop. Laptops are often exposed to dust, hair, and other particles which can block cooling vents and ports of your laptop. This can lead to decreased system performance, and even at times shorten the hardware’s lifetime.. We recommend that you regularly clean your laptop to ensure its longevity.

Overheating is often caused by the fan and heatsink being blocked by objects like dust or hair. Additionally, the cigarette smoke can accumulate on the fan blades and heat sinks. The oily in it can easily attract and absorb dust and hair, causing their accumulation over time.

When the vents are blocked, the fans are not able to properly dissipate the heat, thus restricting the laptop’s performance. When the overheating problem is caused by dust and gunk, we recommend contacting the ASUS Customer Service Center for further assistance.

Please do not clean the interior by using devices that utilize strong airflow for cleaning, such as air boost compressor. Such cleaning method has been observed to damage laptop fans. If you wish to clean the laptop with compressed air or air blaster, please be sure not to retain a proper distance between the nozzle and the laptop. Exposure to strong air blasted from a short distance may damage the fan blade.

Some ASUS laptop models utilize a hidden design (e.g. the UX series). In such cases, the air vent is located at the pivoting part of the laptop (shown in red in the below image) instead its sides.

Notice: For some models (e.g. T100 series), it"s not recommended to clean as per instructions above because its heat radiates lower without a fan and air vent, and instead it"s radiated by the case.

When cleaning the stains, fingerprints, and dust or other particles from the display’s surface, please use a soft microfiber cleaning cloth dampened with 70 to 75% isopropyl alcohol or other LCD cleaning solutions, and wipe the screen gently. Ensure the cloth is damp and not soaking. Do not use common detergents and kitchen cleaning solutions as they are likely to damage the screen.

Turn off the laptop first, then remove AC adapter and battery (for models with removable battery). Carefully examine the condition of the screen for any damage.

Spray isopropyl alcohol or LCD cleaning solution on the soft cloth to achieve slight dampness. Should the alcohol or cleaning solution drip from the cloth, please squeeze excess liquid before proceeding. Gently wipe the screen clean of any dirt or smudges.

Note: Do not spray any cleaning solutions directly onto the screen surface or leave any liquid on the screen when finishing. Water can also be used when other solutions are unavailable.

When cleaning the keyboard, please first turn off the laptop and then remove the AC adapter and battery (for removable battery models) before proceeding.

To clean the LCD cover, LCD bezel, upper case and top case and bottom case, please use a soft microfiber cleaning cloth dampened with 70 to 75% isopropyl alcohol and wipe it gently.

Note: Please ensure the cloth is damp and not soaking. Should the alcohol or cleaning solution drip from the cloth, please squeeze excess liquid before proceeding. Do not spray any cleaning solutions directly onto the laptop or leave any liquid on the laptop.

Let the laptop dry completely after the cleaning process is completed. If there are marks or stains left, moisten the cloth with a neutral cleaner and wipe the dirty areas again until clean.

To clean the dust filters on the 2022 Zephyrus G14, use a soft brush to gently brush the dust away from the filter to allow free air can flow through the grille. Do not use a vacuum cleaner, as this can harm critical components of the laptop.

Even if the notebook seems to function normally, it is strongly recommended to contact your ASUS service center and arrange an inspection and maintenance to prevent any malfunction that could be caused by oxidation and corrosion.

As with any electronic item, televisions attract dust and are magnets for smudges and children"s fingerprints. Luckily, learning how to clean a flat-screen TV is fairly straightforward, requiring little time and few materials.

Regardless of whether you have an LCD or a plasma TV, all flat-screen TVs are made out of thin, flexible materials and should be treated very gently. They have extremely sensitive components, and using chemical cleaners may lead to a broken or blank screen (so skip the window cleaning spray!). Even ordinary kitchen towels or paper towels can cause marks and scratches on the screen. Here"s the right way to clean a flat-screen TV and prevent costly damage.

Clean a flat-screen TV once a week to wipe away the inevitable smudge marks, dust, and fingerprints that will accumulate. Giving it a regular wipe down will prevent dirt and oil from building up.

Shutting off your monitor will not only help you see where dirt and dust have collected, but it will also give your screen time to cool down. A warm or hot screen will be harder to clean, increasing the chances that you"ll accidentally damage it if you scrub too forcefully.

If you take a quick survey of the different cleaning recommendations from various flat-screen TV manufacturers, you"ll quickly discover that many of the directions conflict with each other. When in doubt, check your owner"s manual or look online at the manufacturer"s website for instructions on how to clean your flat-screen TV. This cautionary step will prevent you from doing something the manual warns against, thus voiding your warranty.

Gently wiping the screen with a dry, soft cloth may be the only universally agreed-upon method for cleaning a flat-screen TV. While this will likely take care of any surface lint, it may not be enough to remove oil or dirt. Be warned, an attempt to scrub the screen by using any amount of pressure may only cause the liquid crystals inside to misalign or burn out.

Unless your owner"s manual specifically prohibits it, carefully wipe the screen with a damp, lint-free cloth. When using water, be sure to spray it onto the cleaning towel rather than directly onto the screen. This will give you more control over where the water is going and how much is being used. Have a dry towel handy for carefully drying off the screen.

In certain instances, like when your TV gets mixed up in a food fight or when a child with grimy hands insists on touching the screen, you may need to use a little soap to clean the surface.