128x32 graphic lcd module made in china

Monochrome 128x32 I2C OLED Graphic Display is small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Since the display makes its own light, there is no need for backlight. Therefore the power required to run the OLED is reduced and contrast of display is increased.

The power requirements depend a little on how much of the display is lit but on average the display uses about 20mA from the 3.3V supply. There is a detailed tutorial and also an example code by Adafruit in the form of Arduino library for text and graphics. Since the display needs to be buffered, you will need a microcontroller with more than 512 bytes of RAM.

This module is engineered for high volume production. It uses a "TAB" (tape automated bonding) or "COF" (chip on flex) style flex tail mated with a thin display. The TAB connector must soldered directly to corresponding pads on your PCB using a hot-bar soldering machine, or bonded with anisotropic adhesive using heat and pressure. High volume contract manufacturers will be familiar with this type of construction and its assembly methods. Hot-bar soldering machines designed for prototype, rework or repair of TAB connections are available from equipment suppliers at reasonable cost. The TAB style connection requires no separate connector, so the cost is very low, and the ultra thin profile of the display is maintained.

WO128128A is a circular monochrome COG graphic LCD module made of 128x128 dot matrix format. This Round STN COG module is built in with ST75161 IC; it supports 8080/6800 parallel, 3-wire and 4-wire serial SPI, I2C interface, Viewing Direction 6 o"clock, 1/136 driving duty, 1/12 BIAS.

The supply voltage for logic of WO128128A is 2.7V to 3.3V, typical value 3V. This module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. WO128128A is available in FSTN Negative (Double film) and FSTN positive LCD type with white LED backlight. Please contact us if you need different LCD type and LED color combination.

WEA012832F is a graphic COG with PCB OLED module, which is made of resolution 128x32 pixels, diagonal size 0.91 inch. WEA012832F is built in with SSD1306 IC; it supports I2C interface, 1/32 driving duty. WEA012832F model is having PCB outline size 35.80 × 12.0 mm with 4x1 metal pins on module.

The supply voltage for logic of WEA012832F is 3V/ 5V, supply voltage for display is 7.5V (Internal Boots), display with 50% check board current is 13mA@ 3VDD (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

WEA012864L is a graphic COG with PCB OLED module, which is made of resolution 128x64 pixels, diagonal size 1.28 inch. WEA012864L is built in with SH1106 IC; it supports I2C interface, 1/64 driving duty. WEA012864L model is having PCB outline size 35.50 × 32.0 mm with mounting holes on board and 4x1 metal pins on module.

The supply voltage for logic of WEA012864L is 3V/ 5V, supply voltage for display is 7.5V (Internal Boots), display with 50% check board current is 25mA@ 3.3VDD (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

128x32 small graphic white monochrome OLEDdisplay. Have limited space but need a high resolution, easily readable display? This little OLED could be a perfect display solution for you.