innolux lcd panel firmware update for sale

This package contains the LCD Panel Firmware Update Utility. The LCD firmware accepts data and commands from either a serial or a parallel interface and enables the display to generate text or an image.

Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.

Hatteland Technology AS hereby informs about changes for the following Monitors (MMD / STD) and Panel Computer (MMC) - Series X Generation 1 and 2 based model(s):...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MVD. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update....

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series E. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update. The...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X STD & MMC G1. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MMD & MMC G2. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series 1. The new IACS E10 rev 8 requirements involves compliance to higher frequencies, hence this update. The...

As single source manufacturer, Innolux has decided to end the production of 26" LCD panel used in the Series X HD 26 product families. Originally, the information was that the LCD would go through some HW updates, but since the world wide electronic...

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 1st 2021 or later will be delivered with this new FW implemented. Available for download for units in field, from the...

Series X G2 - Maritime Multi Computer (MMC), Firmware Update New firmware (FW) version is under implementation in our production. Sizes 19" - 27" X G2 MMC Panel Computer products manufactured on December 1st 2020 or later will be delivered with this...

This is an update to ECN issued July 10, 2020 - ECN 11_2020 and EOL issued July 10,2020 - ECN_12_2020.Summary of the Update in this ECN: Type number structure for the new Series 1 Maritime Multi Displays Generation 2 has changed. The typenumber...

Hatteland Technology AS hereby informs about changes for the following Panel Computers, Computers and Peripherals which includes one or more NMEA COM module (PCA100293-1):...

Series 1 Maritime Multi Displays Due to key component obsolescence, the following model(s) will be updated to new variants. All type numbers and variations will be replaced by new part numbers. All products will maintain Form-Fit to current models....

As single source manufacturer, Sharp has decided to end the production of 23.1inch LCD used in the Series 1 JH 23 product family. The LCD and 23.1inch type approved industrial monitor was brought to the marine market by Hatteland as the WORLDS FIRST...

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 6th 2020 or later will be delivered with this new FW implemented. Available for download for units in field, from the...

Hatteland Technology AS hereby informs about changes for Panel Computers (MMC) - Series X Generation 2, Series E and Compact Fanless Computers - HT B30 regarding updated Microsoft® Windows® 10 IoT Operating Systems (OS): Current versions: Win10 IoT...

The HDD SATA 2.5" 320GB Ruggedized/Automotive storage device have reached its End Of Life phase. EOL affects the factory option available for the following Computers and Panel Computers and also applies to Customized Models. HT 221Hx STC-xxx-Mxxx HT...

Hatteland Display hereby informs about changes for the following Series X (Generation 1 and 2) Display and Panel Computer models that uses the 24 inch LCD panel component:...

Hatteland Display hereby informs about changes for Console Mount Kit (CMB) for 24,26 and 27 inch Displays and Panel Computers. Since units started shipping last year the current HD CMB SX1-B1 and HD CMB SX1-C1 (for Generation 1 models) was included...

Hatteland Display hereby informs about changes for the following model(s): CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S): HD xxT21 MMC (12,15,17,19,24 and 26 inch Panel Computers Series X (MMC)) HT B22 HT C02 HT 221 EFFECTIVE...

When dimming backlight on the Hatteland Display"s Series X units to zero the GDC (Glass Display Control) buttons may become difficult to see in daylight. In general, the brightness of these buttons follow the brightness of the panel, however we are...

This is an update to Engineering Change Notification, 16 March 2015. http://www.hatteland-display.com/mails/04_2015_ecn.html. We will implement the new version of 15 inch panel from 01 February 2016 (instead of 01 Sept 2015, reference previous ECN)....

This is an update to Engineering Change Notification, 16 March 2015. http://www.hatteland-display.com/mails/05_2015_ecn.html. We will implement the new version of 19 inch panel from 01 November 2015 (instead of 01 Sept 2015, reference previous ECN)....

New firmware (FW) version is under implementation in our production. All Series X STD display products manufactured on July 01, 2015 or later will be delivered with this new FW implemented....

Hatteland Display hereby informs about changes for the following High Bright Maritime Multi Display (MMD) and High Bright Panel Computer (MMC) model(s):...

Hatteland Display hereby informs about changes related to ECN #7 (16 Mar 2015) "Series X - Maritime Multi Display (MMD), Firmware Update" EFFECTIVE FROM: 24 April 2015 CHANGE(S): - Fixed bug in RS-422/485 communication, incorrect ACK in...

New firmware (FW) version is under implementation in our production. All Series X MMD display products manufactured on March 16 or later will be delivered with this new FW implemented....

Our LCD panel supplier has re-introduced the 20.1 inch LCD, with LED Backlight Technology. As a part of our long term Form-Fit-Function strategy, we will introduce and upgrade our 20.1 inch Series 1 display with LED Backlight Technology....

The JH 15T17 xxC (15 inch) and JH 19T14 xxC (19 inch) of Series 1 type approved panel computers is transitioning to our most popular products in the Series X range. The following models are therefore the subject of this End of Life notification....

This ECN is an update to: ECN, dated Tuesday, February 26, 2013 and ECN, dated Thursday, December 20, 2012 Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that...

This is an update to Engineering Change Notification, 7 February 2014. We will implement the new version of 15 inch panel from 15th May 2014 (instead of 14th April 2014, reference previous ECN). For further enquiries regarding this Engineering...

This is an update to Engineering Change Notification, 12 February 2014. Due to increase of orders we will implement the new version of 12 inch panel from 1th April 2014 (instead of 3th June 2014, reference previous ECN). For further enquiries...

Current standard HDD, 2.5" SATA 250GB which is part of option (standard or customized) for a wide range of Panel Computers (Series 1 and Series X) and Computers is now End of Life (EOL). The successor and new replacement will be HDD, 2.5" SATA 1TB....

Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that there is an 26 inch LED based version under planning and development. As a result of this, we have initiated...

The 27 inch WUXGA LCD has been EOL since many years already. We purchased a high quantity of modules to support customers that already implemented this product in their systems. The same customers has been updated on available units over the year,...

Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that there is an 26 inch LED based version under planning and development. As a result of this, we have initiated...

Hatteland Display have identified a potential issue in the firmware handling electrical hardware interfaces (IO), affecting Solid State relay, Digital Input, Safety Signal Relay, Brightness Control, Light Sensor, Programmable Alarm LED, Buzzer and...

Our supplier has notified the End of Life for the 20.1 inch TFT panel with CCFL backlight technology. The 20.1 inch UXGA LCD is not available in the market anymore and as a result of this the JH 20T17 models have reached their End of Life....

The earthquake in Japan March 2011, caused a lack of supply on several components from Japan. We needed to do a change to our 15" product range, since the backlight modules in the LCD module was stopped as an immediate result of the earthquake. We...

This is an update to End Of Life, 4 January 2011 The Hatteland Display product range aimed at the yacht market (Series 2) will be phased out and replaced by a new range of display products. The Series X as it is currently known will be a full range...

The following ECN apply to all display, panel computer and computer products manufactured by Hatteland Display. Hatteland Display has since many years already, decided to use Torx screws when assembling our products. For a period, we have been using...

We have identified 3 failure symptoms that apply for the Series 2 Displays (MMD) and Panel Computers (MMC) products with factory mounted touch screen....

With reference to ECN #1 2007, this is final EOL notification of the JH 17T02 from Hatteland Display. Since the 17" SXGA LCD panel has become an unpopular size in the market, we have decided to develop the replacement monitor based on a 19" LCD....

The NEC Display Firmware Update Tool is a utility to assist with updating the firmware in large-screen NEC LCD displays and some models of desktop NEC LCD displays.

For models that can be updated via LAN, the update process is almost fully automated and the progress and estimated remaining time is shown.

After a software upgrade that includes an LCD firmware update, the LCD touch panel may remain stuck reporting an error indefinitely / for longer than 30 minutes:

The system is functional, but the LCD displays the firmware update screen indefinitely. The LCD cannot be used while it is frozen on the firmware update warning screen.

Important: Before attempting this workaround, check that there are no indications the system is still performing a firmware update (such as a terminal prompt), and that the following messages can be found in /var/log/ltm after the most recent boot:

These messages indicates that the firmware update has finished, and the LCD is displaying the warning screen in error, so it is safe to perform the workaround.

In this article, you will find the latest news regarding monitor panel development by the three biggest monitor panel manufacturers, which include LG, Samsung, and AU Optronics, as well as Innolux, BOE and Sharp.

For news regarding OLED panels, check out our dedicated guide about OLED monitors, though the most exciting upcoming models will be included here too.

Here, you can see panel developments by popular manufacturers, such as AUO, LG, Samsung, Innolux, etc. Keep in mind that the dates in the tables below imply when the said panel should go into mass production and that these dates may change.

Just like LG’s ‘IPS Black’ panels, BOE is developing IPS-type panel technology with an increased static contrast ratio of 2,000:1, which they call ‘True Black’ IPS.

Below, you will find more information about new monitors by various popular manufacturers. Some of these monitors use the above-mentioned panels, but it’s unknown what panel will be used for most of them. Click on the monitor manufacturer to jump to their models.

It uses an IPS Black panel by LG Display with a high 2,000:1 static contrast ratio, 178° wide viewing angles, a wide 99% DCI-P3 color gamut and DisplayHDR 600 certification.

The Lenovo ThinkVision P49w-30 is a 49″ 5120×1440 super-ultrawide monitor based on LG’s IPS Black panel with a 2,000:1 contrast ratio, 60Hz, 4ms GtG response time, 178° viewing angles, HDR10 support and 350-nit peak brightness.

Corsair revealed a 45″ ultrawide bendable OLED display with a 3440×1440 resolution, variable refresh rate support (FreeSync Premium Pro, G-SYNC Compatible, HDMI 2.1 VRR) and a 240Hz refresh rate! The Corsair Xeneon Flex 45WQHD240 is based on LG’s W-OLED panel and can be bent between 800R to completely flat.

Other specifications include instantaneous pixel response time and infinite contrast ratio thanks to the OLED panel, as well as a high 1,000-nit peak brightness and a wide 99% DCI-P3 color gamut coverage.

ASUS also announced a 27″ 1440p 240Hz OLED gaming monitor, thePG27AQDM based on the same OLED panel as the LG 27GR95QE. However, ASUS’ model will also feature a heatsink, which will allow it to achieve a bit higher brightness.

The ASUS ProArt PA32DCM is a 32″ 4K 60Hz professional monitor based on JOLED’s OLED panel with the regular RGB subpixel layout for sharp text without any fringing artifacts.

The MSI MEG342C QD-OLED is a 34″ 3440×1440 175Hz ultrawide curved gaming monitor based on the same panel as the Dell AW3423DW and the Samsung Odyssey G85SB.

Another interesting model is the Philips 42M2N8900 42″ 4K 120Hz (138Hz OC) gaming monitor based on LG’s W-OLED panel. Unlike ASUS’ model, it has a USB-C port with 90W PD and a stand with height, tilt and swivel adjustment! It will be available in January 2023 for €1960.

Philips also announced the 27M2CS500W model with a 27″ 1440p 240Hz 1000R curved VA panel, but no word on other specifications, such as HDR support and pixel response time speed. It will also be available in January 2023, for €579.

No word on availability yet, while the price should be around $1,070, which is good news considering that the LG 27EP950 with a similar panel goes for $3,000, though LG’s model also supports hardware calibration.

The Samsung Odyssey OLED G9 (G95SC) is a 49″ 5120×1440 240Hz super-ultrawide gaming monitor with a QD-OLED panel, sporting a wide color gamut, an infinite contrast ratio and an instantaneous pixel response time speed.

More information to come, but expect variable refresh rate support, triangular RGB subpixel layout and a semi-glossy panel coating like the one on the AW3423DW/F.

Samsung announced a 43″ 4K 144Hz gaming monitor with a flat-screen VA panel and a QDEF (quantum dot enhanced film) layer sporting a high native contrast ratio, a wide 95% DCI-P3 color gamut and 1ms MPRT (GtG response time not specified).

It uses a 3000R curved VA panel with DisplayHDR 400, FreeSync Premium, 1ms MPRT and a 165Hz refresh rate (170Hz OC). No word on a release date yet, while the price should be around $700.

The Acer Predator X32FP is probably one of the most anticipated monitors that’s been recently announced. It’s based on a fast IPS panel by AU Optronics, sporting a rapid 1ms GtG response time speed, 4K UHD resolution and a 144Hz refresh rate.

However, the X32FP is based on a faster panel and since it doesn’t have a G-SYNC module, you’ll get HDMI 2.1, USB-C, PiP/PbP support and no integrated fan (which can be noisy and fail after some time) at a lower price.

The AOC AGON AG275QXN is the first gaming monitor announced with a flat-screen VA panel and a 1ms GtG pixel response time speed. It’s a 27″ 1440p 165Hz display DisplayHDR 400 and FreeSync support.

It’s unclear which VA panel the monitor is using and, of course, it remains yet to be seen if it’s just a misleading measure achieved by unrealistic test conditions. This at least gives some hope to those who want a VA monitor with a fast response time speed, but don’t like the aggressively curved Samsung models.

It’s PG32UQX monitor with similar specifications goes for $3,000 yet it features a slower IPS panel without HDMI 2.1 or USB-C connectivity, though it has a dedicated G-SYNC module.

The AOC Q24G2 is a 24″ 1440p 165Hz gaming monitor based on an IPS panel by BOE with 99% sRGB color gamut, a 350-nit peak brightness, a 1,000:1 contrast ratio, FreeSync support and MBR.

It’s actually the first 24″ 1440p monitor with a high refresh rate and an IPS panel, which many gamers, who find 27″ sized screens to be too big and 1080p resolution too low, have been waiting for.

ViewSonic also specifies a 1ms MPRT response time speed, but GtG and panel type remain unknown at the moment. The monitor should be available in November 2022 for $1,500.

ViewSonic also announced the XG272-2K model with a 27″ 1440p 400Hz 1ms IPS panel! It will feature FreeSync Premium Pro and G-SYNC Compatible certifications for smooth VRR performance as well as a USB-C port with 90W PD and DP Alt Mode.

All four models can be configured with black or white panel and stand, and can be purchased with or without the stand, or with a single or dual monitor arm.

Dough (previously known as Eve) announced a 27″ 1440p 240Hz monitor based on LG’s W-OLED panel. Unlike theLG 27GR95QE and the ASUS PG27AQDM with matte anti-glare screen coatings, the Dough Spectrum ES07E2D will feature a glossy screen surface for a more vivid (but also more reflective) image quality.

HP announced a 44.5″ 5120×1440 165Hz ultrawide monitor with a 1500R curved VA panel, sporting a 3000:1 contrast ratio, a 3ms GtG specified response time speed, a 400-nit peak brightness and 99% sRGB color gamut.

The Cooler Master Tempest GP27U. It also goes for $800, but has the same issues the GP27U before its firmware update – VRR only works up to 144Hz and local dimming and VRR cannot work simultaneously, though KTC says they will release a firmware update.

BOE revealed a new 27″ 1080p monitor with a refresh rate of 500Hz+. A 1ms response time speed and true 8-bit color depth are specified as well. No word on other specs or release date/pricing, but we’ll update the article as soon as something new comes up.

Laptop Screens & LCD Panels└ Laptop Replacement Parts└ Computer Components & Parts└ Computers/Tablets & NetworkingAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

Some rumors suggested we may see a mini-LED display replace the current LCD screen. According to a report from Taiwan’s Economic Daily News(opens in new tab), the still-rumored Switch Pro model could sport mini-LED screens supplied by Innolux, a well-known manufacturer in the field. The original Switch and Switch Lite consoles use an HD (720p) LCD screen, though the Switch OLED naturally uses an OLED option. If a new Switch console did have 4K capability, we imagine it"d be in docked mode, with handheld mode offering a slightly-boosted Full HD (1080p) display.

Elsewhere, a data miner known as SciresM has claimed (via Wccftech(opens in new tab)) that they have found a reference to a new Nintendo Switch model within the Switch’s latest firmware update, codenamed "Aula". Reportedly, this hardware uses the same chip as the Nintendo Switch Lite and 2019 Switch model, the Mariko (Tegra X1+) SoC. However, SciresM also claims that there are references to support a Realtek chip, a “4K UHD multimedia SoC”.

Rather than being within the Switch tablet, they think it “might be inside a new dock and not inside the tablet, though there’s no way to tell from the firmware code yet.” They also say that the tablet will have an improved OLED screen, though its resolution is still unclear. The claims of some 4K support do line up with the many other reports from the past year, which claim that an upgraded Switch capable of 4K is on the horizon.

Initially filed in May 2018 and registered in April 2020, the patent shows a highly similar controller shape, and layout to the existing Joy-Con found on the original Switch. However, it is slightly updated, and rather than being designed to slide onto a screen like the current Joy-Con, this controller appears to be a standalone device with no rails for sliding in sight.

CodenamesDataminers have been coursing through Nintendo"s firmware version 10.0.0 for information on new Switch consoles and have apparently identified codenames for the upcoming devices.