replacement for lcd panel model number 15-1272wm made in china

Broken screen replacement service is provided from thousands of repairs stores and phone parts wholesalers worldwide, iPhone of which are mostly engaged in. So how to purchase reliable LCD screens among so many quality grades from China suppliers? Let me firstly elaborate on the quality grades of the iPhone LCD digitizer assembly that most repair stores and traders used to replace the broken ones.

According to the investigation, 90% of the Chinese iPhone LCD screen suppliers are found selling third-party manufactured screens and seldom sell genuine original LCD screens. Therefore, if your phone screen is broken, there would be a high chance for your screen to be replaced with a non-original one. Why? Maybe the cost and quality are relatively competitive, so why not?

As known, Foxconn is authorized to assemble iPhone, so there are some original iPhone LCD screens leaked from the assemble factory. And there are brought out from the factory for replacement. However the price is definitely high and still, some people care more about the quality of the screen than how much they cost, so for this group of customers, the Original Quality of LCD digitizer assemblies are preferred.

For some LCD digitizers, the LCDs are still working while the front glasses are broken, which can be recycled. Some factories recycled these broken screens by removing the broken front glass and attach a new one, then the LCD digitizer assembly would be new again, which is what called refurbished. Brand new original LCD screens are limited, and the refurbished ones can replenish the shortage of the new original LCD digitizer assemblies, for their quality would be more stable than the third-party manufactured.

Some Chinese factories purchase the original single LCD display, not compete LCD screen from the original factory, and then attach high copy front glass, backlight, etc, materials into a complete LCD screen, which quality is not stable and the display color is slightly different from the ones with high copy backlight. Well, their price would be cheaper and loved by many repair shops and wholesalers.

Under the shortage of original LCD screens, many Chinese factories begin to produce the high copy LCD screen. The stock and supply are getting less and less since about 2015, which leads the price goes higher and higher. Therefore the Chinese manufacturer starts to produce LCD screens with high copy raw materials. With competitive prices and good quality that meet most iPhone users’ needs, they are also popular among many wholesalers and repair shops.

With the premium quality of LCD and OLED screens tested strictly, we’ve helped many clients enlarge their markets worldwide. If you wholesale the LCD digitizer assembly or retail them in your repair shop, more information and sample are supported for your reference, please do not hesitate to contact us or leave your comment to discuss more.

Mandy, ETS is obviously a company that you are connected to and this could easily be taken for spam. I think we can make an exception at this time since you are asking a good market research question that may be useful to many.

Having checked out your video, I personally will not use the aftermarket screen as a replacement for my X. It just doesn"t have what I expect for a $1000 USD phone. I recognize that $300 USD for a replacement is hefty but the aftermarket screen does not appear to have the quality that I would expect for my phone.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The information contained herein is subject to drive to install the Windows 7 software and change without notice. The only warranties for take full advantage of Windows 7 functionality. HP products and services are set forth in the http://windows.microsoft.com/en-us/ express warranty statements accompanying windows7/get-know-windows-7 for details.

Restore and recovery ............................124 Recovering using HP Recovery Manager ..................125 What you need to know ....................125 Using the HP Recovery partition (select models only) ..........125 Using HP Recovery media to recover ................126 Changing the computer boot order ................126 Removing the HP Recovery partition .....................

Restoring specific files ........................130 Restoring specific files using Windows Backup and Restore ........130 Recovering the original system using HP Recovery Manager ............130 What you need to know ....................130 Recovering using HP Recovery partition (select models only) ........131 Recovering using the recovery media ................

√ √ USB 2.0 (2 ports) √ √ √ √ VGA (Dsub 15 pin) supporting 2048×1536 external resolution @ √ √ √ √ 75 Hz, hot plug and unplug and auto-detection for correct output to wide-aspect vs. standard aspect video Hot Plug/unplug and auto detect for correct output to wide- aspect vs.

√ √ HD audio √ √ Dual speakers √ √ HP TrueVision HD webcam (fixed, no tilt with activity LED, 1280×720 by √ √ 30 frames per second) Ethernet Integrated 10/100 network interface card (NIC) √ √ Intel Bay Trail chipset models...

√ √ USB 2.0 (2 ports) √ √ VGA (Dsub 15 pin) supporting 2560×1600 external resolution @ 60 Hz, √ √ hot plug and unplug and auto-detection for correct output to wide- aspect vs. standard aspect video Hot Plug/unplug and auto detect for correct output to wide-aspect vs.

AMD Radeon HD 8280 Graphics (E2-3800) √ √ AMD Radeon HD 8210 Graphics (E1-2100) √ √ Panel 39.6-cm (15.6-in), high-definition (HD), light-emitting diode √ √ √ √ (LED), SVA BrightView (1366×768) display; typical brightness: 200 nits Touchscreen, 39.6-cm (15.6-in), high-definition (HD), light- √...

Category Description Non-touch; Non-touch; Touch; Touch; discrete discrete Power 65-W Smart AC adapter; for use in all countries except China and √ √ requirements India) 65-W EM Smart AC adapter; for use in China and India only) √ √ √ √...

Component Product name Serial number Product number Warranty period Model number (select models only) Component Serial number Product number Warranty period Labels...

Component Model number (select models only) Revision number ● Regulatory label(s)—Provide(s) regulatory information about the computer. ● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Chapter 2 External component identification...

747124-001 ● Blue 750201-001 ● Purple 750202-001 Top cover (includes keyboard): For use in black HP 15 and Compaq 15 models: ● For use in the United States 747140-001 ● For use in France 747140-051 ● For use in Italy 747140-061 ●...

For use in Denmark, Finland, and Norway 747140-DH1 ● For use in the Czech Republic and Slovakia 747140-FL1 For use in white HP 15 and Compaq 15 models: ● For use in the United States 747141-001 ● For use in France 747141-051 ●...

For use in Denmark, Finland, and Norway 747142-DH1 ● For use in the Czech Republic and Slovakia 747142-FL1 For use in blue HP 15 and Compaq 15 models: ● For use in the United States 750195-001 ● For use in Greece 750195-151 ●...

● For use in the Netherlands 750196-B31 ● For use in French Canada 750196-DB1 For use in gray HP 15 and Compaq 15 models: ● For use in the United States 747143-001 ● For use in the United Kingdom 747143-031 ●...

Item Component Spare part number ● For use in Bulgaria 749022-261 ● For use in Thailand 749022-281 ● For use in Japan 749022-291 ● For use in Europe 749022-A41 ● For use in Taiwan 749022-AB1 ● For use in South Korea 749022-AD1 ●...

Item Component Spare part number ● UMA graphics, Intel HM76 chipset, Windows 8 Professional 747137-601 ● Discrete graphics, Intel HM76 chipset, without Windows 8 748839-001 ● Discrete graphics, Intel HM76 chipset, Windows 8 Standard 748839-501 ● Discrete graphics, Intel HM76 chipset, Windows 8 Professional 748839-601 ●...

The hard drive bracket is available using spare part number 747117-001. 1-GB, 5400-rpm, 2.5-in 676521-005 750-GB, 5400-rpm, 2.5-in 634250-005 500-GB, 5400-rpm 669299-005 320-GB, 5400-rpm, 2.5-in (for use only in HP 250 models) 622643-005 (16) Speakers (includes left and right speakers and cable) 747135-001 (17) Battery: 4-cell, 41-Whr, 2.8-Ah Li-ion battery...

Optical drive connector 747120-001 Hinges (left and right) 747121-001 Display assembly (39.6-cm [15.6-in] HD, anti-glare, touchscreen, for use in for use in HP 15 black modelsBlack 747122-001 Display assembly (39.6-cm [15.6-in] HD, anti-glare, touchscreen, for use in HP 15 white models 747123-001 Display assembly (39.6-cm [15.6-in] HD, anti-glare, touchscreen, for use in HP branded red models...

(includes replacement thermal materials) 747140-001 Top cover with keyboard for use in black HP 15 and Compaq 15 models in the United States 747140-051 Top cover with keyboard for use in black HP 15 and Compaq 15 models in France...

Top cover with keyboard for use in black HP 15 and Compaq 15 models in Denmark, Finland, and Norway 747140-FL1 Top cover with keyboard for use in black HP 15 and Compaq 15 models in the Czech Republic and Slovakia 747141-001...

Top cover with keyboard for use in red HP 15 and Compaq 15 models in Denmark, Finland, and Norway 747142-FL1 Top cover with keyboard for use in red HP 15 and Compaq 15 models in the Czech Republic and Slovakia 747143-001...

747143-DB1 Top cover with keyboard for use in gray HP 15 and Compaq 15 in French Canada 747143-DH1 Top cover with keyboard for use in gray HP 15 and Compaq 15 models in Denmark, Finland, and Norway 747144-001 Webcam/microphone module...

Top cover with keyboard for use in black HP 250 and HP 255 models in Denmark, Finland, and Norway 749022-FL1 Top cover with keyboard for use in black HP 250 and HP 255 models in the Czech Republic and Slovakia 749553-001...

Top cover with keyboard for use in blue HP 15 and Compaq 15 models in French Canada 750196-001 Top cover with keyboard for use in purple HP 15 and Compaq 15 models in the United States 750196-151 Top cover with keyboard for use in purple HP 15 and Compaq 15 models in Greece...

Spare part Description number 753100-601 System board for use only in models with UMA graphics, Celeron N2820 processor, and Windows 8 Professional (includes replacement thermal materials) 756215-001 Rubber Kit for use in HP 250 models Sequential part number listing...

● Avoid contact with pins, leads, or circuitry. ● Turn off power and input signals before inserting or removing connectors or test equipment. Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ●...

Lift to disengage the adhesive that secures the webcam/microphone module to the display, and then remove the module (2). To remove the display panel: Remove the six Phillips PM2.5×4.0 screws (1) that secure the display panel to the enclosure, and then rotate the display panel and hinges forward to gain access to the hinge screws (2).

Remove the six Phillips PM2.0×3.0 screws (1) that secure the display panel to the hinges, and then rotate the display panel onto the keyboard (2). Component replacement procedures...

On the back of the display panel, release the adhesive strip (1) that secures the display panel cable to the display panel, and then disconnect (2) and remove (3) the cable. Reverse this procedure to reassemble and install the display bezel, webcam/microphone module, and display panel.

For use in Denmark, Finland, and Norway 747141-DH1 ● For use in the Czech Republic and Slovakia 747141-FL1 Top cover with keyboard for use in red HP 15 and Compaq 15 models: ● For use in the United States 747142-001 ●...

For use in Denmark, Finland, and Norway 747142-DH1 ● For use in the Czech Republic and Slovakia 747142-FL1 Top cover with keyboard for use in blue HP 15 and Compaq 15 models: ● For use in the United States 750195-001 ●...

For use in French Canada 747143-DB1 ● For use in Denmark, Finland, and Norway 747143-DH1 Top cover with keyboard for use in black HP 250 and HP 255 models: ● For use in the United States 749022-001 ● For use in the United Kingdom 749022-031 ●...

Description Spare part number ● For use in French Canada 749022-DB1 ● For use in Denmark, Finland, and Norway 749022-DH1 ● For use in the Czech Republic and Slovakia 749022-FL1 Before removing the top cover/keyboard, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

Remove the top cover (2). Reverse this procedure to install the top cover/keyboard. Note the antenna routing path on the bottom of the computer when reassembling the computer. Component replacement procedures...

TouchPad button board Description Spare part number TouchPad button board (includes cable) 747127-001 Before removing the TouchPad button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

Remove the two Mylar screw covers (1) and the two Phillips PM2.5×4.5 screws (2) that secure the display bezel to the display assembly. The Mylar screw covers are included in the Rubber Kit, spare part number 747133-001 for HP 15 and Compaq 15 models, 756215-001 for HP 250 models, and 751418-001 for HP 255 models.

Remove the webcam/microphone module (2). (The module is attached to the display enclosure with double-sided tape.) To remove the display panel: Remove the six Phillips PM2.5×4.0 screws (1) that secure the display panel to the enclosure, and then rotate the display panel (2) onto the computer. NOTE: In this procedure, the display will NOT be connected to the computer, as shown in the following image.

On the back of the display panel, release the adhesive strip (1) that secures the display panel cable to the display panel, and then disconnect (2) and remove (3) the cable. Remove the panel from the display enclosure. To remove the display hinges: Component replacement procedures...

Remove the six Phillips PM2.0×3.0 screws (1) that secure the display hinges to the display panel. Remove the display hinges (2). To remove the wireless antenna cables and transceivers: Release the wireless antenna cables from the clips (1) built into the display enclosure. Remove the wireless antenna cables and transceivers (2).

Disconnect the connector from the hard drive (4). To remove the hard drive bracket, remove the four Phillips PM2.5×3.0 screws (1) that secure the bracket to the hard drive. Chapter 4 Removal and replacement procedures...

Remove the hard drive bracket from the hard drive (2). Reverse this procedure to reassemble and install the hard drive. Component replacement procedures...

Description Spare part number ● Windows 8 Standard 747149-501 System board for use only in models with an AMD A4-5000 processor and discrete graphics: ● Without Windows 8 747151-001 ● Windows 8 Standard 747151-501 System board for use only in models with an AMD E2-3800 processor and discrete graphics: ●...

Lift the side opposite of the connectors of the system board (3), and then pull the system board away from the connectors to remove it (4). Reverse this procedure to install the system board. Component replacement procedures...

Remove the fan: Disconnect the fan cable (1) from the system board. Remove the fan from the clip on the system board (2). Remove the fan (3). Intel processor and UMA graphics (not Bay Trail) Intel processor and discrete graphics (not Bay Trail) Component replacement procedures...

Remove the heat sink: Loosen the four Phillips screws that secure the heat sink to the system board (1). Remove the heat sink (2) from the system board. AMD processor and discrete graphics Chapter 4 Removal and replacement procedures...

AMD processor and UMA graphics The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal materials are included with the fan/ heat sink assembly, processor, and system board spare part kits. Intel Bay Trail processor and UMA graphics Component replacement procedures...

● Thermal paste is used on the processor (1) and the heat sink section (2) that services it Intel processor and discrete graphics (not Bay Trail) Chapter 4 Removal and replacement procedures...

● Thermal paste is used on the processor (1) and the heat sink section (2) that services it AMD processor with UMA graphics ● Thermal paste is used on the processor (1) and the heat sink section (2) that services it Chapter 4 Removal and replacement procedures...

Lift the processor (3) straight up, and then remove it. NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. Chapter 4 Removal and replacement procedures...

Position the system board upside down. Disconnect the battery cable from the system board (1), and then lift the battery up and off the system board (2). Reverse this procedure to install the RTC battery. Component replacement procedures 103...

Insert the flash drive into a USB port. Restart the computer. Press while the computer is restarting, and then press for boot options. Select the flash drive from the boot options window. 132 Chapter 10 Backing up, restoring, and recovering in Windows 7...

BSMI certification mark. For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C- UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3X0.75/1.00mm conductor size, with plug BS 1363/A with BSI or ASTA marks.

Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. Remove the display bezel (3). Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure.

Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel. Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display panel frame.

Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel upright. Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. 148 Chapter 14 Recycling...

Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Remove the backlight from the backlight frame. Disconnect the display cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel.

Release the tape (4) that secures the LCD panel to the display rear panel. Remove the LCD panel. Recycle the LCD panel and backlight. 150 Chapter 14 Recycling...

16 removing 52, 74, 75 hard drive 11 packaging guidelines 47 spare part number 36 mute 16 plastic parts, service HP PC Hardware Diagnostics (UEFI) power 11 considerations 45 downloading 109 RJ-45 (network) status 12 Plastics Kit using 109...

20 removing 69 service considerations spare part number 28, 36, 69 recovering the original system 130 cables 45 TouchPad zone, identifying 15 recovery 130, 133 connectors 45 transporting guidelines 47 discs 123, 126 plastic parts 45 traveling with the computer 22...

webcam identifying 14 webcam light, identifying 14 webcam/microphone cable illustrated 31 removing 52, 74, 75 spare part number 36 webcam/microphone module illustrated 31 removing 51, 73 spare part number 40 weight removing 106 Windows File History 124 restoring files 124 system restore point 123 Windows Backup and Restore restoring files 130...

We Guarantee a working compatible replacement with the same or better specifications as the original one or your money back! If the replacement we ship to you is Dead-On-Arrival, we will cover shipping cost both ways (return and replacement). Our commitment is to provide you with a working replacement!

Please, make sure your original screen has the same specifications before purchasing this item. If you are unsure of what your current screen"s specifications are, please contact us and we will gladly help.