adafruit 3.5 tft display arduino factory

The Adafruit 3.5" TFT FeatherWing has a touch screen display on the front and a socket for any Feather on the back, including the Particle Argon, Boron, and Xenon. You can find technical information at Adafruit.

You don"t need to use this library - if you only need the display and not the touchscreen, for example, you can use the Adafruit_ILI9341_RK directly directly.

Recent Arduino IDE releases include the Library Manager for easy installation. Otherwise, to download, click the DOWNLOAD ZIP button, uncompress and rename the uncompressed folder Adafruit_HX8357. Confirm that the Adafruit_HX8357 folder contains Adafruit_HX8357.cpp and Adafruit_HX8357.h. Place the Adafruit_HX8357 library folder your ArduinoSketchFolder/Libraries/ folder. You may need to create the Libraries subfolder if its your first library. Restart the IDE.

Great for gaming, the PiTFT Plus 2.8 Raspberry Pi Touchscreen has the flexibility to be used as a console, X window port, or for displaying images and videos. This TFT LCD resistive touchscreen, with a 3.5inch screen, works with the 2×20 connector, and fits neatly on top of later generation Raspberry Pis.

I"ve attached the config, but there is clearly something not correct when using the monitor command ( I didn"t know about that one so thanks ) The display uses CS pin 32 on an arduino IDE project that works, but the same config in ESP-iDF with this port doesn"t. I"m sure it"s some configuration on something other than pins which is the issue maybe?

This is a 3.5” IPS capacitive Touchscreen Display. The module, with a resolution of 480x320, adopts ILI9488 as driver IC and SPI (4-line) communication mode. The board integrates touch chip GT911, employing I2C communication to realize multiple touchpoints controlling. The module also integrates an SD card slot allowing you to easily read the full-color bitmap. There are two modes of wiring supplied, normal pin header wiring and GDI. The latter one requires to work with a main controller board with a GDI interface (e.g. FireBeetle-M0). You can use it with only one FPC line plugging in, which reduces the complexity of the wiring. Furthermore, it features high resolution, wide viewing angle, and simple wiring, which can be used in all sorts of display applications, such as, IoT controlling device, game console, desktop event notifier, touch interface, etc.

The product is a Breakout module. It adopts SPI communication and has onboard GDI interface, which reduces the complexity of wiring and can easily display the contents read from SD card.