5 inch hdmi touch screen tft lcd panel supplier

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

All the accessories listed below tier pricing need to pay.We won"t deliver until you select. Power adaptor should be 5V/2000mA in output and center pin for positive voltage and the outer shield for negative voltage .The temperature for controller RTD2660 would increase during working.That"s normal phenomenon,not quality problem.

ER-TFTV050A1-1 is 480x272 dots 5" color tft lcd module display with small HDMI signal driver board,optional capacitive touch panel with USB controller board and cable and 4-wire resistive touch panel with USB driver board and cable, optional remote control,superior display quality,super wide view angle.It can be used in any embedded systems,car,industrial device,security and hand-held equipment which requires display in high quality and colorful video. It"s also ideal for Raspberry PI by HDMI.

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

WF50FSYFGDHGV is an IPS 5 inch High Brightness 800x480 TFT-LCD module with Capacitive Touch Panel (PCAP). WF50FSYFGDHGV comes with a control board which only supports Raspberry PI system HDMI Signal interface (only DVI). There is a 40-pin GPIO connector on the control board which is designed to make Raspberry Pi usage easy. The control board on module is featured with four mounting holes which is an easy method for customers to fix modules on their applications. WF50FSYFGDHGV is adopts IPS panel which has a wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The brightness is 750 nits (typical value); the Capacitive Touch Panel is built in with ILI2130 IC which supports USB interface. We also offer Resistive Touch Panels (RTP) for WF50F HDMI signal series, available part number WF50FSYFGDHTV (RTP touch screen).

The supply voltage for LCM (VDD) of WF50FSYFGDHGV is 5V, glare surface glass, aspect ratio 5:3, and contrast ratio 1000:1 (typical value). It can be operated at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.

RFF50VF-1YH-DHG is a 5” IPS TFT-LCD display supporting HDMI connector (only DVI signal) and projected capacitive touch screen (PCAP). This TFT module uses IPS screen which allows users to see the display clearly at wider angles. Also, this module has 800x480 resolutions for better image quality. RFF50VF-1YH-DHG comes with PCAP touch panel supporting USB interface; part number (RFF50VF-1YH-DHS) for resistive touch panel is also available, too. The PCAP touchscreen has a built-in IC ILI2130 which enables 1-point/2-point/multiple-point touch. The brightness is 750 cd/m2 with contrast ratio 1,000:1. LCM voltage ranges from 4.9V~5.1V, typical value is 5V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

HDMI connector and USB cable are optional accessories. Customers can use them to connect the module with Raspberry Pi. The module is able to support Raspberry Pi up to 3B+ (Pi 4B is included). Please note the standard package of RFF50VF-1YH-DHG doesn’t include any HDMI connector or USB cable. Besides, customers need to be aware that it’s necessary to prepare a micro HDMI to HDMI connector on their own.

This 5 inch TFT display with touch function is a mini panel-mountable HDMI monitor. It"s small and simple, and the shape makes it easy to attach to a electronic product.

5 inch HDMI display with 800*480 mini LCD screen, high-resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.

It is resistive touchscreen monitor which comes with a touch pen for easy use. When working with Raspberry Pi 4 3B+ 3B 2B+, directly plugged, I/Os for touch function and power supply, HDMI interface for displaying.

This mini HDMI monitor can also work with standard HDMI device as a little PC monitor, please adjust output resolution to 800*480 and use 5V2A power supply to power it via the USB port. The touch function is NOT available in this case.

Monitor can work with standard HDMI devices (adjust output resolution to 800*480),while the touch function is only available for Raspbian and Ubuntu systems.

Monitor can work with standard HDMI devices (adjust output resolution to 800*480),while the touch function is only available for Raspbian and Ubuntu systems.

A wide variety of 5 inch touch screen options are available to you, such as repair, call center and on-line technical support and return and replacement.You can also choose from 16:9, 4:3 5 inch touch screen,As well as from wifi, 4g, and gsm. And whether 5 inch touch screen is new, stock, or {3}.

The 3.5 inch TFT LCD HDMI Touchscreen Display Module for Raspberry Pi (B010601)is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.The 480 x 320 pixels resolution TFT LCD with touch screen requires no external power supply. The software package contains everything you need to start, including calibration software and virtual keyboard.

This 5-inch resistive touch screen designed for Raspberry Pi 3 2 model B RPI 1 b + a + can"t work with Raspberry Pi zero directly Can work with all standard HDMI devices but the touch function is just for Raspbian and Ubuntu systems. This Raspberry Pi screen is with 800 x 480 resolution We design a protective case for it and it needs you to assemble it you could look for the below QA to download the tutorial or contact us by email to get it. When the 5-inch monitor work with RPI it doesn"t need an external power supply This Raspberry Pi screen is power is supplied and can be touched by GPIO display by HDMI If it is powered by external power there will be a no-touch function and please use 5V2A power supply to power it. The screen is a resistive touch screen that needs a touch pen to touch it it is hard to touch with a finger The touch pen is for easy control and use.