tft display reinigen brands

Special gentle cleaner for TFT screens and LCD displays. A technical glass cleaner designed specifically to meet the needs of computer monitor and television users. A dirt-free monitor is a prerequisite for comfortable and easy work in an ergonomically designed workplace. Due to the inevitable build-up of static electricity, each monitor screen attracts dirt and requires thorough, gentle, streak-free cleaning from time to time. The resistant active foam cleans without solvents such as alcohol, petroleum ether or ammonia. Do not spray directly on the screen. It is used to clean TFT and LCD screens for: PC monitors, laptops and laptops, mobile phones, camcorders, navigation systems.

Focus Displays offers a wide range of standard full color TFT displays. 64 million unique colors, high brightness, sharp contrast, -30C operating temperature, and fast response time are all good descriptions of a TFT display. This is why TFT technology is one of the most popular choices for a new product.

Thin Film Transistor (TFT) display technology can be seen in products such as laptop computers, cell phones, tablets, digital cameras, and many other products that require color. TFT’s are active matrix displays which offers exceptional viewing experiences especially when compared to other passive matrix technologies. The clarity on TFT displays is outstanding; and they possess a longer half-life than some types of OLEDs and range in sizes from less than an inch to over 15 inches.

CCFL’s are still available, but are becoming a legacy (obsolete) component. TFT displays equipped with a CCFL require higher MOQs (Minimum Order Quantities) than displays with LED backlights.

The majority of TFT displays contain a touch panel, or touch screen. The touch panel is a touch-sensitive transparent overlay mounted on the front of the display glass. Allowing for interaction between the user and the LCD display.

Some touch panels require an independent driver IC; which can be included in the TFT display module or placed on the customer’s Printed Circuit Board (PCB). Touch screens make use of coordinate systems to locate where the user touched the screen.

Resistive touch panels are the lowest cost option and are standard equipment on many TFT modules. They are more common on smaller TFT displays, but can still be incorporated on larger modules.

Contrast ratio, or static contrast ratio, is one way to measure the sharpness of the TFT LCD display. This ratio is the difference between the darkest black and the brightest white the display is able to produce. The higher the number on the left, the sharper the image. A typical contrast ratio for TFT may be 300:1. This number ratio means that the white is 300 times brighter than the black.

TFT LCD displays are measured in inches; this is the measurement of the diagonal distance across the glass. Common TFT sizes include: 1.77”, 2.4”, 2.8”, 3”, 4.3”, 5”, 5.7”, 5.8”, 7”, 10.2”, 12.1 and 15”.

As a general rule, the larger the size of the glass the higher the cost of the display, but there are exceptions to this rule. A larger display may be less expensive than a smaller display if the manufacture produces higher quantities of the larger displays. When selecting your color display, be sure to ask what the cost is for one size smaller and one size larger. It may be worth modifying your design requirements.

TFT resolution is the number of dots or pixels the display contains. It is measured by the number of dots along the horizontal (X axis) and the dots along the vertical (Y axis).

The higher the resolution, the more dots per square inch (DPI), the sharper the display will look. A higher resolution results in a higher cost. One reason for the increase in cost is that more driver chips are necessary to drive each segment.

Certain combinations of width and height are standardized and typically given a name and a letter representation that is descriptive of its dimensions. Popular names given to the TFT LCD displays resolution include:

Transmissive displays must have the backlight on at all times to read the display, but are not the best option in direct sunlight unless the backlight is 750 Nits or higher. A majority of TFT displays are Transmissive, but they will require more power to operate with a brighter backlight.

Transflective displays are readable with the backlight off provided there is enough ambient light. Transflective displays are more expensive than Transmissive also there may be a larger MOQ for Transflective. However, Transflective displays are the best option for direct sunlight.

Drivers update and refresh the pixels (Picture Elements) of a display. Each driver is assigned a set number of pixels. If there are more pixels than a single driver can handle, then an additional drivers are added.

A primary job of the driver is to refresh each pixel. In passive TFT displays, the pixel is refreshed and then allowed to slowly fade (aka decay) until refreshed again. The higher the refresh frequency, the sharper the displays contrast.

The controller does just what its name suggest. It controls the drivers. There is only one controller per display no matter how many drivers. A complex graphic display with several thousand pixels will contain one controller and several drivers.

The TFT display (minus touch screen/backlight) alone will contain one controller/driver combination. These are built into the display so the design engineer does not need to locate the correct hardware.

If you do not see a Thin Film Transistor (TFT) Display module that meets your specifications, or you need a replacement TFT, we can build a custom TFT displays to meet your requirements. Custom TFTs require a one-time tooling fee and may require higher MOQs.

Ready to order samples for your TFT design? Contact one of our US-based technical support people today concerning your design requirements. Note: We can provide smaller quantities for samples and prototyping.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Das Arbeiten ist an einem gut gereinigten Bildschirm deutlich angenehmer und auch das Spielen macht mehr Spaß, wenn Sie dabei vollen Durchblick haben. Wir geben Ihnen im Folgenden einige nützliche Tipps an die Hand, wie Sie Ihren Bildschirm schnell von Schmutz, Staub, Flecken etc. befreien und verraten Ihnen, was Sie beim Bildschirmreinigen besser unterlassen sollten.

Besser zum Bildschirmreinigen geeignet ist ein Mikrofasertuch, das Sie mit etwas Wasser anfeuchten können. Sanft und ohne starken Druck wischen Sie damit über den Monitor, um Verunreinigungen wie Fingerabdrücke zu entfernen.

Für starke Verunreinigungen gibt es spezielle TFT-Reiniger. Diesen sollten Sie nicht direkt auf den Bildschirm, sondern auf ein Mikrofasertuch sprühen. Mit dem so präparierten Tuch reiben Sie mit leichtem Druck über die Verschmutzung, bis diese sich gelöst hat.

Glasreiniger kann für das Bildschirmreinigen ebenfalls verwendet werden. Allerdings sollten Sie darauf achten, dass dieser keinen Alkohol enthält, der die Schutzschicht des Monitors angreifen kann.

Das (Taschen-)Tuch, mit dem Sie den Monitor reinigen möchten, sollte nie völlig in Wasser getränkt, sondern nur leicht angefeuchtet sein. Bei der Verwendung von übermäßig viel Wasser kann davon etwas ins Innere des Monitors gelangen und dort Kurzschlüsse verursachen.

Wenn Sie einen speziellen TFT-Reiniger verwenden, sprühen Sie diesen auf das Tuch und nicht direkt auf den Bildschirm. Das aggressive Mittel kann unter Umständen die Schutzschicht des Bildschirms angreifen und die Bildqualität an den betroffenen Stellen mindern.

The event includes 11+ hours of networking with industry influencers, thought leaders, and C-suite executives. In addition to two nights of tabletop displays and receptions on July 18 and 19, a highlight of WOW 2023 will be Lightning Talks. Tabletop exhibitors will give “supersized elevator speeches” for five minutes. Participants will have the opportunity to follow up with tabletop exhibitors during the reception.

The event includes 11+ hours of networking with industry influencers, thought leaders, and C-suite executives. In addition to two nights of tabletop displays and receptions on July 18 and 19, a highlight of WOW 2023 will be Lightning Talks. Tabletop exhibitors will give “supersized elevator speeches” for five minutes. Participants will have the opportunity to follow up with tabletop exhibitors during the reception.

The event includes 11+ hours of networking with industry influencers, thought leaders, and C-suite executives. In addition to two nights of tabletop displays and receptions on July 18 and 19, a highlight of WOW 2023 will be Lightning Talks. Tabletop exhibitors will give “supersized elevator speeches” for five minutes. Participants will have the opportunity to follow up with tabletop exhibitors during the reception.

The event includes 11+ hours of networking with industry influencers, thought leaders, and C-suite executives. In addition to two nights of tabletop displays and receptions on July 18 and 19, a highlight of WOW 2023 will be Lightning Talks. Tabletop exhibitors will give “supersized elevator speeches” for five minutes. Participants will have the opportunity to follow up with tabletop exhibitors during the reception.

ST cooperates with Riverdi because we believe that such partnership brings value to our joint customers. On top of this, we also discovered that we shared some business visions about how to make it easier and faster to go from the initial stages of designing a product embedding a graphical user interface to a production ready product. The conclusion was that combining the STM32 High performance microcontrollers, with the free STM32 graphics toolchain and Riverdi displays + PCB and then merge all of this into a board support package ready to run TouchGFX, would be a compelling offering.

Designing and developing a product with an embedded user interface (GUI), can be complex, as it involves many building block and disciplines, which all requires expert knowledge. Riverdi offer is covering a lot of them, allowing the customer to focus on the most important part of the development, the GUI Application itself. And remember that this is the face of your product. Choosing such solution, the customer does not need to worry about sourcing components like the display, microcontrollers, memory, etc. or even writing low-level drivers, development the board support package or porting TouchGFX. Its all ready done. What makes cooperation with Riverdi unique is that Riverdi has been able to drive a 1280*800 display resolution in high colors, with a STM32H7 microcontroller and a TouchGFX application showing a smart home UI. This shows that Riverdi is well aware of how to exploit all the capabilities of the STM32 Graphics offering combining hardware and software in a unique solution. From the first business meetings, it was clear that we shared visions of the market for embedded GUIs. And Riverdi proved that they can go from an idea and concept to actual working hardware, very fast.

STONE Tech is a manufacturer of HMI display modules (Intelligent TFT LCD). We provide LCD modules/LCD Display, Graphic LCM, smart Display LCD, TFT LCM, Custom LCD Module Display...