white spot on lcd screen supplier

If you find yourself in a situation where you notice white spots or dots on the TV screen, don"t worry. This problem is known to occur on most LCD TVs and is really simple to fix. The white spots you notice are the LED backlight light inside the TV.

Due to frequent use or poor quality, some parts inside the TV may move out of their position and cause white spots or dots to be projected on the screen. In this article we will explain why this problem occurs and how to fix it. So let"s get started.

So what are the causes of white spots or spots on the TV screen? White spots or spots on the LCD TV are the result of a dropped reflector (lens) inside the LCD TV panel. These reflectors are placed in front of the LED backlight and are used to spread the LED light across the screen. They usually fall out due to poor quality or the heat created inside the TV.

When you open the TV you will find a series of LED lights covered with reflectors or plastic lenses. These lenses are mostly glued in front of the LED backlight, and as the TV gets hot with use, they start to fall off their spot and create white dots or spots on the TV screen.

As we said above, these white spots or spots on the TV screen appear very often due to overheating issues and poor screen quality. Anyone who has paid attention knows that older TVs are practically unaffected by this image error.

This problem is mainly found in televisions with LED backlighting, more precisely the so-called side LED backlight. Behind the panel is a light conducting plastic plate.

Dead Pixel: Each LCD and LED TV is made up of millions of pixels or dots whose main purpose is to illuminate and produce the image on the TV screen. Sometimes, the problem can occur if some pixels are damaged and get stuck in a particular state that is causing the problem and appear as white spots on the TV screen.

LED Reflectors: Each LCD TV is equipped with a reflector (lens) which helps to facilitate and diffuse the LED light on the screen. Sometimes, these spotlights loosen and fall out of place. When this happens, you will notice the white bright spot on the TV screen. In most cases, you will have several white spots or smudges on the screen, not just one.

To solve the problem of white spots on the TV screen, you will have to open the TV and with the help of the super fast glue you will have to put the fallen reflector back into place.

Whether or not you are experienced in repairing TVs or gadgets, if you follow the instructions below, I believe you will be able to repair your TV and get rid of the white spots on your TV screen. You will need to take apart your LCD TV and return the fallen reflectors to their original position with the help of glue. What you will need is the following:

If you already own an LCD TV or have decided to buy one, the testing process is identical. I always give it a try before deciding to buy a new LCD TV. New models may also have problems with white spots or spots.

During transportation or due to poor installation quality, the round reflectors can fall out of place and cause white spots. So to test a TV before purchasing and see if the image defect is present you can do a simple test.

Note! You can also press Pause during a movie when the screen is black to test the LCD TV to see if there are any white spots or spots on the TV screen.

White spots (dots) on the TV screen are a very common problem on LCD TVs. Almost all LCD TVs operate using a small chip made up of millions of tiny mirrors. Each mirror is like a dot or a pixel on that screen.

When the spotlight or lens moves from its original position, these white dots appear on the screen. But in some cases, there may be more damage to the TV screen than a simple displaced spotlight or dead pixel, and it can cost you more than a new television.

Therefore, it is recommended to contact a specialist if you notice that the problem is not only with the displaced reflectors but something more. Please note that if your TV is under warranty, it is recommended that you contact a service center and let them take care of this issue. They have more experience with this type of problem and will fix your TV for free.

The problem of spots or white spots on the TV screen is nothing new and can appear on almost any LCD or LED TV, whether they are completely new or used. We have already mentioned in this article that this problem can be solved very easily and you don"t need to be afraid.

You can take apart the TV and see if the reflective lenses have fallen off and use super glue to put them back in place. If you think you can"t fix this on your own, contact a TV service technician and let them do the job. I hope that we have helped you at least a little and that you will be able to solve the problem with the white dots on your television screen.

Those could either be pressure points meaning something is under the screen pushing up on it or it could be a defective LCD. If you can get that screen off in one piece as those spots disappear then something is putting pressure on the display. If they’re still there when you lift the screen off then it’s a defective LCD and you should contact the supplier to get a replacement or refund depending on their policy.

Flashing white dots on tv screen appear to result from faulty reflectors inside the LCD panel. This can cause 3 dots on the TV screen. Bright spots can result from stuck pixels on the screen. A dead pixel is usually black, while stuck pixels can be white or any other colour.

There are many ways to remove white spots on your laptop screen. You can manually fix loose LCD reactors by pressing the affected area with a damp cloth until the pixels become normal again. However, if the white spot is a result of a damaged screen, you may have to replace the whole screen.

Typically, you can greatly decrease clouding on your TV screen simply by changing the television’s settings. Reducing the backlight level, turning on the light sensor setting, and changing the power saving setting can all help reduce clouding on your TV screen.

Clouding is an effect where light shines through the screen in a spotty pattern. You often see it on older monitors and on screens that were not handled properly. It’s caused by pressure being exerted on the screen for a short or long period of time. This has physically damaged the screen.

Mainly pressure marks occur when you repeatedly press your laptop screen with your fingers or place any heavy item on top of the lid. These marks indicate that the LCD panel’s inner surface has been physically damaged. The issue is quite similar to the issue of dead or trapped pixels.

If you want to check how this line appears, you can apply pressure on your screen and see the bars; they will disappear after some time. But if you use a lot of pressure, they can also become permanent. The vertical lines are due to the hardware issue, so if the lines are permanent so need to replace the LCD screen.

Since LCDs don’t provide their own light, the lifespan of the LCD’s light source determines the TV screen’s longevity. On average, the life expectancy of an LCD TV is estimated at between 30,000 to 60,000 hours. A household that watches six hours a day of television can expect to replace the LCD TV unit after 28 years.

People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.Jan 30, 2018

If your screen is displaying bars, lines, dead pixels and other abnormalities, your flat-screen TV might be going bad. It might also be dying if it won’t turn on, the sound quality is bad or the screen keeps flickering or fading.

Reduce the Backlight Level in the Picture Settings Menu. Turn the Light Sensor setting to On in the Setup Menu. Change the Power Saving setting to Low or High in the Setup Menu.

Samsung TVs can last around 4 to 7 years with constant usage. This includes having it set on the highest brightness, and almost always being on. If you care for your TV properly it can last you much longer than this time frame.

#2 – Panasonic. Panasonic produces a variety of durable television sets, as well as being some of the most energy-efficient on the market (better for you, and the environment!)

Ideally, any television should last for at least ten years before brightness and other features begin to suffer. The same applies even when viewed for longer than the national average of around four hours per day. Moreover, TVs may last even longer when protected by an extended TV warranty from Upsie.

From a component standpoint, this TV features a lot of parts, but generally, the LEDs in its backlight are probably going to fail first. The average lifespan of an LED at maximum or close-to-maximum brightness is 40,000 to 60,000 hours, or roughly 4.5 to 6.8 years.

With less demand for actual TVs, there’s less reason for manufacturers to price them even more highly. But the most interesting and telling reason for why TVs are now so cheap is because TV manufacturers have found a new revenue stream: advertising.

If you find yourself in a situation where you notice white spots or dots on your TV, don’t worry. This problem is known to occur on most LCD TVs and it is really simple to solve. White spots (dots) that you notice are the light from the LED backlight inside your TV.

Due to frequent use or poor quality, some parts inside the TV can move from their spot and cause white spots or dots to project onto the screen. In this article, we’ll explain why this problem occurs and how to solve it. So, let’s start.

So What Causes White Spots or Dots on TV Screen?White spots or dots on LCD TV are a result of a fallen reflector (lens) inside the LCD TV panel. These reflectors are placed in front of the LED backlight and are used to spread the LED light on the screen. Usually, they fall off due to the poor quality or the heat that is created inside the TV.

When you open the TV you will find a bunch of LED lights that are covered with plastic reflectors or lenses. These lenses are mostly glued in front of LEDbacklights, and as the TV overheats with use, they start to fall off from their spot and create white spots or dots on your TV screen.

There is also a similar problem with LCD TVs, and that is the creation of dark (black) spots on TV. If you are interested to learn What Causes Dark (Black) Spots on TV Screen, read the following article.

As we said above, these white spots or dots that appear on LCD TVs are most often the cause due to overheating problems and the poor built-in quality.Anyone who has paid attention knows that older TVs are practically not affected by this image error.

This problem is mainly found in televisions with LED backlighting, more precisely, the so-called side-LED backlighting. A light-conducting plastic plate is located behind the panel.

LED Reflectors: Each LCD TV comes with a reflector (lens) that helps to facilitate and spread the LED light on the screen. Sometimes, these reflectors get to loosen up and they fall off from their spot. When that happens, you will notice the white bright spot on your TV screen. In most cases, you will have several white spots (dots) on your screen, not just one.

Whether or not you have previous experience in repairing TVs or gadgets, if you follow the instructions below, I believe you will be able to fix your TV and get rid of the white spots on your TV screen. You will need to disassemble your LCD TV and return the fallen reflectors to their original place with the help of glue. What you will need is the following:

If you get stuck on some step in the process above, watch this great video where everything is explained in detail and shows the whole process of how to fix this problem with white spots or dots on your LCD TV.

If you already have an LCD TV or have decided to buy one, the testing process is identical. I always do a test before I decide to buy a new LCD TV. Even new models can have problems with white spots or dots. During transport or by the poor installation quality, round reflectors can fall out of place and cause white spots. So, to test a TV before buying and see whether the image defect is present you can do a simple test.

There are different TV models (types) where this problem with white spots or dots can occur. On some TV models, the problem that causes white spots may be different, so it is necessary to know how to proceed.

Also, keep in mind that if you encounter a more complex problem, leave it to the professionals. In the table below, you can see how to fix the problem with white spots or dots for different TV types:

TV typeMain Cause of White Spots or DotsFix Problem of White DotsLCD / LED TVFallen reflectors (lenses) inside TV; impact or pressure on the screen surfacePlacing the reflector (lenses) on the right spot by using super glue.

White spots (dots) on the TV screen are a very common problem on LCD TVs. Almost all LCD TVs work by using a small chip that is made up of millions of tiny mirrors. Each mirror is like a dot or pixel on that screen.

When the reflector or lens is moved from the spot, it causes these white dots to appear on the screen. But in some cases, there might be more damage on your TV screen than just a moved reflector or a dead pixel and it can cost you more than a new matrix.

Therefore, it is recommended to contact the TV specialist if you notice that the problem is not only with the moved reflectors but in something more. Keep in mind that if your TV is under warranty, it is recommended to contact a service center, and let them handle this problem. They have more experience with these kinds of problems and they will fix your TV for free.

The problem of white spots or dots is not something new, and it can appear on almost any LCD or LED TV whether it is completely new or used. We have already mentioned in this article that this problem can be solved very easily and you do not have to be afraid.

You can disassemble the TV and see if the reflective lenses have fallen out of place and use super glue to put them back on. If you think you can’t solve this problem on your own, contact a TV service technician and let him do the job. I hope that we helped you at least a little and that you will be able to solve the problem with white dots.

My laptop"s (Dell Latitude D630) LCD screen turned black but the system is running fine.  I purchase a replacement LCD screen and now it has a large white spot at the bottom right of the screen at the login screen.  Then after I login, the white spot moves to the left hand side.  So I reached out to the vendor for another replacement, but once I put the screen in, the white spot is on the same area at login and after logging in (see attachements).  I know the hard drive and o/s are fine b/c I connected a monitor and everything looks great.  So I"ve ruled out that the LCD screen is not the cause...now what?

DIY Fix for removing white spots and pressure point dots from LED screens, LCD monitors & TVs. With disassembly guide for BenQ GW2470 showing how to take the monitor apart.

Some of the links in my video descriptions are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase. If you have a different purchase in mind, you can also use these storewide links below.