how do you clean an lcd screen price

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

Screens, especially touchscreens, collect a lot of dirt, grease and hair. This means that periodic cleaning is something we all have to and should do.

Now, plenty of people get away with wiping a smartphone screen against their t-shirt or pants or using a sleeve to clean a laptop display, but this is not the best way and can itself damage the display.

Do a quick search on the internet, and you"ll find that isopropyl alcohol is the weapon of choice in cleaning displays. This is true, but if used incorrectly, this chemical can also damage the display.

The big DON"T of using isopropyl alcohol is this -- don"t pour or even spray isopropyl alcohol on your display. If you put too much isopropyl alcohol on a screen, damage can occur in two ways:The isopropyl alcohol can seep between the layers of the display, completely ruining it and requiring the device to have a replacement screen fitted

Apple has, naturally, published detailed information on safely cleaning a whole range of products, from notebooks to tablets to smartphones. While this is aimed at Apple users, the information applies to other brands too.

Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it"s looking a little dull lately, it might be time to give it a good cleaning. Here"s how:

Step 2:Gently wipe the dust from the surface of the display using a dry, lint-free cloth, like a microfiber cloth. Remove any tags that may be on the cloth to avoid scratching the display with the tags.

If you prefer, you can use a cleanser made specifically for cleaning LCD displays, but do not spray it directly onto the display. Spray a small amount of the cleaner onto a microfiber cloth first, to avoid getting any cleaning solution inside the display.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Industrial LCD displays and computer monitors are generally very low maintenance, but they do need a good cleaning every once in a while to make the viewing experience more enjoyable and extend their lifespan. But it’s important that you learn the proper ways to clean LCD screens to avoid damaging them in the process. Keep reading to learn how to clean a monitor screen the right way, so that you can get the most use out of it and remove smudges, dirt, and germs.

Cleaning your computer screen the wrong way could actually damage it and lead to expensive repairs or replacements. To avoid this type of headache, here are some tips on how to clean a monitor screen the right way.

Computers usually come with special care instructions from the manufacturers that explain in detail the proper ways to care for your device and keep it clean. Before setting up your device, make sure to read through the care instructions carefully and follow them closely. If you have any questions or need further assistance, you can contact the manufacturer directly.

Make sure to turn the monitor off before you start cleaning it as wiping it with a damp cloth while it’s on can damage the pixels. Plus, it’s easier to see the dust, smudges, and dust particles when the screen is off and completely black. That way, you can make sure you get a thorough clean without damaging the screen. Turning off touchscreen devices before cleaning is also highly recommended so you can avoid accidental touches that perform the wrong actions or functions.

LCD screens have protective anti-glare and anti-reflective coatings on them to improve visibility. Touchscreens also have oleophobic coatings that prevent fingerprint oil smudges from appearing on the screen. Store-bought glass cleaners contain harsh chemicals such as alcohol and ammonia, which can penetrate the surface of the screen and severely damage its internal mechanism after wearing down the protective coatings. It’s best to stay away from using household cleaners on your industrial LCD displays unless you have the greenlight from the manufacturer.

Canned air is incredibly effective at blasting away dust particles, crumbs, hairs, and any other organic materials that can become stuck to your screen or lodged between the keys on your keyboard. This prevents the particles from scratching the surface of the screen.

Microfiber cloths are also a great option because they usually have grooves that gently capture and remove stuck-on particles while also removing smudges on the screen without damaging them.

If blasting the screen with canned air or wiping it down with a microfiber cloth doesn’t work, then your next best option is cleaning it with distilled water. Unlike tap water, distilled water isn’t fortified with mineral deposits that can scratch or damage industrial display monitors. Many manufacturers advise against spraying the water directly onto the screen for obvious reasons. Instead, spray a small amount onto a microfiber cloth until it’s just damp and gently spot wipe the parts of the display that need it.

Some manufacturers of industrial computer monitors also sell special screen cleaners that are meant to go along with their products. If you’re lucky, they might even be included with your original purchase. These are light cleaning solutions that effectively remove dirt, grime, and dust from your screen for optimal functionality and usability. After applying a cleaning solution to your screen, make sure to let it dry completely before resuming usage. Otherwise, you’re just going to smudge the screen again if it’s a touchscreen.

For more tips on how to clean a monitor screen and keep it in tiptop shape, contact Nauticomp Inc. We’re one of the leading suppliers of industrial computer monitors and displays around the globe.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

To catch every second of your favorite show and keep your TV in excellent condition, you"ll need to clean your television screen regularly so it remains dust-, dirt- and fingerprint-free. But using the wrong cleaning method like spraying your TV directly with harsh chemicals can cause permanent damage and negate any warranty that may still be in effect.

That’s why the Good Housekeeping Institute’s Cleaning and Media and Tech Labs have joined forces to recommend the safest, most effective methods and household products to clean your television screenand reveal a picture that’s brilliant to watch and totally streak-free.

No matter what type of television you have, our recommended cleaning method remains the same. All you"ll need to clean your TV screen is a dry microfiber cloth that’s designed to gently clean and remove smudges from eyeglasses, cell phones and camera lenses. Though there are thousands of microfiber cloths to choose from, our experts like Elite Tech Gear"s oversized option. It"s twelve inches square, so it’s easier to use on a large TV screen than a smaller cloth and helps you can zap away fingerprints quickly. And since it"s designed for delicate surfaces and electronics you can use it to clean your laptop and iPad once you"re done with your TV.

Here"s the best way to clean a flat-screen TV without ruining it or ending up pesky little streaks, along with some useful tips on how to scrub down all the accessories that go along with it:

See you later, dirty television screens. Whether your TV screens are challenged by dust or inconvenient smudges that seem to appear from nowhere, it’s time to adopt a simple cleaning routine that takes care of all that. Get your screen clean pronto, and then kick back and enjoy the show.

Before you start guessing at what will work for your home’s needs, refer to the owner"s manual that came with your television. It’s always best to get advice from the manufacturer, especially if there’s a warranty involved; however, if that document has long since hit the recycling bin, follow these tips and take necessary precautions so you don’t cause permanent damage to the pixels and electrical components.

Different screens require different cleaning agents, and though we address how to clean old school glass-screen tube TVs and glass-coated iPad screens below, we know it’s more likely that you’re dealing with a flatscreen LCD or plasma television. TL;DR: Avoid abrasion. Avoid excess moisture. Avoid harsh chemicals.

Use soft, lint-free microfiber cloths and nothing rough or abrasive. Even paper towels can scratch a television, and plasma screens in particular are very delicate.

Always refer to manufacturer guidelines for cleaning and play it safe if there’s any doubt, especially if the only cleaners you have on hand are harsh chemicals with a bad reputation.

Remove dust with a dry microfiber cloth. Wipe around all edges of the screen too, because dust buildup on ports and speakers can negatively affect performance over time.

Mist a formulated cleaning spray onto a clean microfiber cloth; you can opt for store-bought or try an easy DIY solution, such as 1:1 parts of white vinegar and distilled water, or 1:4 parts distilled water to 70% isopropyl alcohol. These formulas may dry at different rates, so be sure that you don’t oversaturate your cloth.

If you’re using a vinegar- or alcohol-based cleaner, thoroughly wipe down the remote with the damp microfiber cloth you used to clean the television screen.

Big tip: Remove the batteries first so you don’t accidentally turn on the TV (and undoubtedly, push the magic combination of buttons that turns on subtitles and changes your settings to German … you know how it is).

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

These displays are not constructed to be touched. It"s very important to exercise care in the handling of a liquid crystal display. The tiny dots that make up the images on the screen are each a separate transistor/crystal. Pressure can "crack" pixels easily, and when the pixels are damaged, black spots fill those areas of your monitor.

Pressing and poking, whether with a dull object such as your finger, or a sharp object, such as a pen or knife, typically damages far more than one individual pixel.

Silk is unnecessary and because of it"s non-absorbent nature makes for a poor wiping material. Silk, despite its ooo-ahhh factor, is really just going to push things around.

Don"t attack a dusty monitor with a great deal of force, regardless of your cloth. Attacking a dusty monitor with anything transforms your wiper into a piece of fine gritted sandpaper. Use a Swiffer duster (the "feather duster" type with a handle... not the cloth), a microfiber or cotton cloth, or a can of compressed air to get the dust off before you clean with a liquid product.

Isopropyl alcohol at 100% would not be something you"d want to soak a piece of plastic in, but in a 50/50 combination with water (or even less) it will dissolve finger-print oil and many other marking agents and evaporate quite fast (thus while it may HARM plastic if left exposed it doesn"t get the chance) and it"s evaporation process forces the water around it to also evaporate quickly.

Television screens are supposed to be clean and free of dirt, dust, or any debris that may blur vision. This is why this component is one of the most vital parts of a Television. Nothing can be worse than straining your eyes to make sense of the pictures your set is projecting. If you do not clean your TV regularly, fingerprint smudges and dust will build up.

Cleaning your LED TV or any type of television for that matter is something you should do at least once every 2 or 3 weeks. In fact, I will suggest that you do it as often as you watch it any paying more attention to the screen when you do so. If you clean your TV set regularly, it will always look brand new, and you will enjoy bright and colorful pictures without said. Bearing that in mind, there are ways to go about a cleaning endeavor. Unfortunately, not everyone knows how to clean a set effectively. Many think that a piece of towel soaked in water will do. How wrong they are. Television screens are very sensitive, so a great deal of care is required to do the job effectively. In addition to that, being careful also protects the screen for damage. Secondly, you need to understand that TV sets are different. Although they all project sounds and images, they are built differently. So, therefore, the approach to cleaning should also be different as well.

The approach to cleaning an LED TV screen, for instance, requires extra care compared to the cleaning of a Tube TV. They both have screens, but the former is more sensitive than the latter due to the sensitivity of LED screens build material. Bearing all this in mind, how do you safely clean an LED TV screen without damaging it in the process. In this article, we will show you safe and intelligent ways to go about it using available and affordable materials. You will also learn a few tips about how to do it safely too.

Before you proceed, you need to bear two things in mind when cleaning LED TV screens. Firstly, you want to do it in such a way and with the right materials that ensure the screen is clean and devoid of dust or stains of any kind. You want your screen to be as bright and clear as possible. Secondly, you want to avoid damaging the screen or reducing its projection quality. This is why it is necessary to use only the right cleaning materials and approach at all times. Now, here are some helpful tips for adopting when cleaning an LED television screen. [/fusion_text]

Every electronic equipment comes with an owner’s manual. This manual provides the user with sufficient information about how to use and maintain the gadget. The same thing goes for LED sets. They come with an owner’s manual too. Before you clean the set, you may want to read the manual first.

In fact, it is advisable that you read it first immediately you buy and install it in your home. By reading the manual, you gain more understanding regarding how to care for the television all through it a lifespan in your home, office, or wherever you install it. For the purpose of cleaning, pay attention to the section that provides information about how to do it effectively.

Reading manuals is important because different television manufacturers provide different approaches to cleaning their sets. What works for an LG LED TV may not work for a Samsung set. That is why it is so important to only follow the recommendation of a one cap fits all approach to cleaning your TV screen. If you read the manual when you bought it, but you have forgotten the cleaning details, consult it once again to refresh your memory.

Before you start the cleaning properly, turn off the television set. Do not stop at that. You also need to unplug it from the power source. Once you have done that, do not start cleaning the screen immediately. Give it time to cool down. The cleaning process may take between 2-5 minutes or even more depend on your LED TV model or how long it was on.

Turning the TV off will cut off power leading to the cooling down of the screen. You don’t want to be cleaning a hot or warm screen, do you? You want to make sure that the screen is as cool as possible and non-reactive to whichever cleaning agent you use.

Another advice to take in that is so important is that you should never use paper towels to clean the screen. There are reasons to avoid paper towels. Paper towels, especially when soaked in water, leave smudges and stains on the screen. No matter how long or how hard you try to wipe the marks off, they yet remain. Paper towels are bad for your TV screen. It’s as simple as that.

To enjoy an ultimate cleaning experience, you should consider using microfiber cleaning pieces. Some people recommend cotton whole because they are more breathable. However, microfiber cloths are more durable. In addition, they do not stick to your screen. Older LED, or LCD screens can’t handle traditional cleaning methods or materials. With microfiber, you can eliminate stains, remove smudges, and fingerprints with ease.

To use microfiber, simply wipe the surface of the screen in a circular motion. Cover as much part of the screen as you possibly can. Work your way around the edges as well. More importantly, when cleaning, avoid touching the screen with your bare hands as doing so will leave fingerprint marks on it.

The use of chemicals should be avoided at all costs. Chemicals damage screens more than you know. That a chemical agent worked on a particular surface is not an indication that it will work well for your TV screen. LED screens are very sensitive and fragile, so you ought to make sure that you keep chemicals as far away as possible. Another material you should never use is a detergent solution (water and detergent).

Soap, scouring powder, was window cleaners, and any other general industrial cleaner should be avoided. Abrasive pads and towels made from paper should not be used either. Using any of these materials will lead to screen scratches, anti-glare coating damage, or permanent screen damage. The sad part is that the damage may not be noticeable at first, but over time, the same will become permanent.

If you must wet your cleaning material with water, do so in little splashes. Avoid spraying the screen directly with water. When wiping the screen, do so gently because it can break if pressed too hard as screens are very fragile.

You will notice that your microfiber cloth cannot reach the edges of the screen like the other areas. If you don’t clean the edges too, dust and first will accumulate in those parts, and after a time removing the stains will love difficult. Furthermore, failure to clean screen edges will lead to an uneven appearance, with poor picture quality being the end result. To clean edges and corners effectively, use cotton swabs to greater effect. For better results, dab the cotton swabs in water. Pick off the dirt carefully by dragging them out using the swabs. Do this for the four corners of the screen.

As for the edges, run the swabs up and down systematically but avoid running them all the way down to the edges as this may drive dirt further on that may be difficult to remove. For better results, use as many cotton swabs as you can.

Unlike an LED TV screen, cleaning a Tube TV is much easier. Tube TV screens are more rugged and can withstand pressure, but doing so carefully is also important. You can use a microfiber cleaning cloth doused in a little water. Never spray the screen directly as this may damage it. Rather, work your way with the microfiber cloth. Apply the same circular cleaning motion like you would do an LED TV screen. Cotton swabs will also come in handy to pick off the dirt from the screen corners.

Dish soap can also be used on LED and LCD screens, albeit with care. Before you use a dish soap solution, first wipe the screen with a dry cloth to remove dust. Now, dip your cleaning cloth in the dish soap solution. Squeeze off the liquid then gently wipe the screen. Make sure you cover every surface area. Once you are done, don’t waste time to clean; otherwise, the solution will dry up on the screen leading to a blurry vision. Rinse the cloth with water to remove soapy residue then take the dry cloth you used to wipe off the dust once again to dry the screen.

Yes, they do. There are actually cleaners specially made for cleaning tv screens. Screen cleaners contain distilled water, isopropyl, and alcohol solutions. If you must use an electronic screen cleaner, make sure you shake to content before use. Also, apply on a limited portion of your cleaning cloth.

Cleaning your TV remote control is part of a general TV cleaning process. So to clean your remote control, follow these tips. Pop-out the batteries:Remove the batteries from the remote. Doing so will create enough room when cleaning the interior casing.

Tap the remote lightly on a hard surface:Remote controls gather a lot of dust and debris along the way. To remove them, tap the remote control on a hard surface like a table. Do this gently and several times to dislodge debris stuck in crevices.

Use a mild disinfectant:Apply a cleaning disinfectant on a piece of cloth and clean the body thoroughly. The use of disinfectant is necessary because our hands carry germs, and we transfer these germs to the remote control anytime we operate it. Clean the whole body thoroughly.

Maintain a weekly timetable:To ensure that your TV set is always clean, make sure you clean it weekly. Add it as part of your to-do list when cleaning your home. If your furniture deserves regular cleaning, so does your television set. Doing regular cleaning will atop dust, debris and fingerprints from smearing the screen. It is also much easier to clean when there is little dust on the surface. Keeping a microfiber cloth close by is also advised so that you can quickly wipe off dust when necessary.

Never spray your LED TVset directly with any substance:Avoid spraying your screen directly with any substance even if it is an electronic cleaning gel. Excessive spraying can damage the cabinet and the structural make-up of the screen. If you must use any cleaning solution, apply it on the napkin or microfiber cloth you are using and gently wipe the screen with it.

Use a Vacuum:To draw out dust and debris hidden in the crevices of the set, use a low suction vacuum. You may also use the vacuum cleaner’s soft brush to remove dust from the cable, vents, and ports of the TV

Adhere strictly to the User Manual:Your LED TV set comes with a user manual for a reason. The manual is meant to guide your use of the device. When cleaning your set, make sure you follow the directives of the manufacturer. Doing it any other way may damage the TV beyond repair.

Avoid strong cleaning agents:Just like we pointed out in the article, avoid strong cleaning agent as not all of them are good for your television’s screen. The screen is very sensitive, so bear this in mind. Some examples of cleaning agents to avoid include unmixed alcohol, ammonia, acetone, and Wax.

Maintaining your LED TV set requires a lot of patience and attention to detail. If you want the screen to remain in good shape, you need to clean it regularly and with proper cleaning materials. If you follow the tips in this article, your screen will remain bright and sharp for as long as you use the set.