vinger on lcd displays manufacturer

I’ve used “Glass Plus” on my laptop and my 19″ LCD for about four years now. I also use the brown paper towels that are on a roll; they are used in the dispensers in bathrooms. I get the end of the roll before it is discarded.

Sorry all, but I have one related question rater than a tip. I am interested in advice on how to clean the “solid” stuff from the LCD screen. You see, it’s that during all these years, there were many “little dots” of such stuff (like small coagulated pieces of coffee etc.) that I accidentally spilled or whatever, and now they’re spreading all over my screen.

I use terry cloth dust cloths that are like magnets for dust and dirt. They are reusable and environmentally smart. I have seen them in stores, but bought mine from a catalog. You can’t go wrong.

I apologize for not having a tip, rather I do have a question. I had a LCD TV which used to look all nice and perfect. All of the sudden a big yellow stain appeared on it. I came to find out that my mother came to visit, she decided to help out with the cleaning and she applied Windex to my TV. Ever since, we haven’t been able to remove this stain. Does someone know if there is a way to remove this stain? Or am I stuck with it forever?

There don’t seem to be any reports of success for resolving this issue, so if you try any of these ideas, please let us know how it goes! Here are a few ideas that might work:

3) Put a couple drops of cooking oil on a soft cloth and polish the area. Add more oil to the cloth as needed. Any oil should be fine – olive, coconut, canola, etc.

4) This idea seems promising: wipe the area with an acrylic cleaner, such as Peek polish. If the coating on the screen has been damaged, removing the coating should resolve the issue, which is why this might work. A new anti-glare coating can be applied afterward.

Of course, if you can’t fix the problem, you might be able to replace just the screen. It’s not a cheap option, but probably better than replacing the whole device. Good luck!

Someone at Target told me that a little drop of Dawn dish soap and water works great. I’ve been cleaning my LCD TV that way for a while now and it looks and works great.

I’m got a problem that few, if any, others will have encountered: in a modern museum setting, we have several large LCD monitors that are routinely exposed to small quantities of water mist (from a simulated flash flood exhibit). During design, the quantities of water were deemed insignificant, but over time we’ve found the build-up of mineral deposits (“hard water stains”) in the form of droplets on the screens has become a problem. Does anyone have any suggestions? I’m reluctant to try any of the acidic, off-the-shelf hard water stain removers that you might use in your shower, but I’m open to any suggestions.

Manufacturers like Apple recommend cleaning with a soft cloth and a solution of water and no more than 50% isopropyl alcohol. I personally clean my screen with a microfiber cloth and water. Microfiber cloths are commonly sold as eyeglass cleaners, it is designed to wipe up dust and dirt. With the right cloth, you only need water.

I recently purchased a wide-screen LCD TV and was concerned about what to clean the screen with. I spent hours Googling the topic and here is a synopsis of what I found:

Another pretty good product to clean LCD screens with is a product called Clearview. It is an isopropyl alcohol based product which contains no ammonia. I tried it on my 40 inch LCD TV and it did a nice job on the screen.

Vinegar is not good for your LCD. I buy these little wipes at Wal-Mart in the electronics section. It is an alcohol solution in an individually wrapped packet. They work well and you get like 20 or 30 for $1.97 best of all they are good to leave in your laptop bag for on the go cleaning since they are individually packaged.

If its a larger amount of paint, you may have to buy a new LCD as removing a large amount of dried paint physically will damage the screen, and chemicals that dissolve the paint will probably melt everything, including the screen.

I was carrying my 32″ TV down to the basement and slipped on the stairs. The TV dragged across the white stair rail and left 2 large white paint marks on the LCD screen. I found your tip, tried the vinegar (it worked somewhat). I then tried the alcohol, in the mixture you stated. The alcohol worked great and left no marks whatsoever. You could never tell it happened. Thank you very much!!!

First, wipe with a damp cloth that has just a drop of Dawn on it, follow with a cloth with very little isopropyl alcohol (gets any fingerprints and smudges real good), and then follow with a dampened cloth of just water. Cloths I used were just cotton pillowcases.

Well, I’ve read every comment on here; some say don’t use vinegar or microfiber cloths, then some say DO. Well, I use the microfiber on my TV for around 2 years now and my TV is FINE! So what’s the deal? I really don’t understand why one thing says do this and the other says something different, which is RIGHT?

Why is there all this confusion???? I’ve been using wipes sold at Walmart that are specifically made to clean LCD screens and they’ve always worked great!!!

God, just spend a couple bucks for these. A lot of stores sell LCD wipes. I don’t understand why anyone would claim they damage your screen as they do not!! However-for badly spotted screens (made by soft drinks, etc), one might want to use something a bit more major. But for general cleaning, use the wipes.

I don’t recommend Monster cleaner like someone did; that stuff streaks to all heck and takes forever to come out. I made the mistake of using a damp paper cloth and though luckily, I haven’t scratched the TV screen at all, it left a little bit of white – what I’m assuming are paper towel bits – embedded into my screen. I’ve tried washing them out gently and rubbing them out and whatnot, but they just aren’t coming off. Any suggestions?

This is often the case with the internet and open forums like this. You have to remember that by posting or reading a forum like this, you are posting and reading to/from all who are doing the same thing. Not everyone who posts an answer will be an expert. So the one that is “RIGHT” is the one you think is “RIGHT” and that’s the problem; you have to have know the answer to know which one is “RIGHT,” otherwise it’s take your pick and hope the one you pick is OK. But I would always go with some form of logic and ask:

What is in most commercial cleaning LCD products? Answer: “NOT vinegar.” So most problems on the posts saying, “NOT vinegar,” are right. That said, if the screen is glass, then vinegar is good.

I did have to buy a General Electric LCD cleaner that came with a liquid solution and just applied the spray onto a special fiber that the cleaner had, and just wiped my 24″ LCD screen with circular motions all around the monitor. It looks just as if it were new, not even when sunlight hit the monitor did I ever see a stain or anything like it.

I just used Windex, sprayed on a paper towel, and now have swirls and smears on my screen. Is it okay to use the LCD wipes (i.e., will it resolve the problem)?

I just saw a video regarding this topic on YouTube. The person in the video advises isopropyl alcohol (90%) + distilled water (10%) mixture coupled with a sprayer and a cleaning cloth that is used for cleaning camera lenses.Bad idea. camera lenses are made of glass while LCD screens are plastic and need something not so strong.

I tried monster cleaner and it made a mess, taking three months to get the streaking mess off my TV. Windex doesn’t work; the best bet is distilled water and a microfiber towel. Monster is a rip-off big time, they changed it so it is no longer a good product.

Use a small bowl and put a drop of Dawn in it. Add warm water to create foam. Then, dip your microfiber cloth or what you use to clean your screen. Gently wipe, then take another damp rag to rinse it with just plain water, and dry. You have a clean screen. This is what Sony told me to do and it works. I have had no issues in three years of using this method.

I just sprayed antibacterial Pledge on my Sanyo LCD to dust it and the color in my tv is basically all green. I didn’t know there was a certain way to clean these TVs. Will the color go back to normal? What do I do?

Vinegar is an acid!! How can the internet be full of dumb people telling others to do this. If you clean your screens with vinegar, even if you dilute it, you will damage it in the long run. If you don’t have a product made for it, just use water.

Take a clean bowl. Put some vinegar in it. Add a touch, I mean one single drop, of regular Dawn in it. Use a good paper towel (not the scratchy brown ones) and use it on LCD. This will clean and smudges, dirt and most particles. Might have to give it a few wipes. Always dry ASAP after you use this method other wise it leave some streaks. As long as you clean and dry ASAP it will get your screen crystal clear.

Yes, LCD screens for computers or TVs are usually replaceable. There are also some easy methods you can use to try to fix the scratch yourself, such as with a pencil eraser, Vasaline, or a scratch repair kit.

I’m trying to read everything on this page. But, I cannot get the specific answer that I want. Sorry, but I do have a question and I want a relevant answer. The LCD on my laptop has a stain from hair dye, and I cannot remove it by using alcohol. I need help; any suggestions?

What you need to do is determine what products can be used to remove hair dye, then determine which of those products are safe to use on an LCD screen. Here is an article that lists some products that can remove hair dye stains from some surfaces: How to Remove Hair Dye from Towels. Look to see which of the ingredients you have, then search online to see if they are safe to use on an LCD screen.

I want everyone to know that vinegar on a LCD TV screen is an extremely bad idea as it will eventually cause a yellowish stain on the screen and it won’t come off, so FYI, never use vinegar on a LCD T.V screen. Use a glasses cleaner, or if you don’t have any, distilled water works too; just make sure you use the microfiber cloth that should come with the TV as it came with mine, and it works great on my screen, but use it only n the screen as using it on household appliances might ruin it and washing it might ruin it as well.

Well, I have a question about the caller ID window on my new Panasonic phone. I made a mistake and got a few drops of liniment and Cutter insect repellent on the clear caller ID window. Now, spots are on the front of it and nothing removes it. Does anyone have any idea how I can remove those spots? I am most appreciative of any help you may offer. Thanks.

Chemicals can quickly change plastics / screen and I"m sure manufacturers didn"t test their products how - If there is a way at all - to restore them after contact with random chemicals.

If you"ve applied only a small amount of vinegar and your monitor was positioned in a normal direction (vertical screen) then it"s very unlikely vinegar could find its way to the electronics.

Don"t spray the screen because the mist can get in the sides and bottom/top of screen area and short out your monitor. Play it safe and spray the cloth. These things are expensive.

It is good to know that flannel is the best material to use to clean an LCD screen. I learned the hard way how important it is to use the right products to clean these screens. I was spraying on a general cleaner, with a paper towel and now my screen has a dull finish to it.

I am going to try the vinegar and water solution to see if this will help. I don"t have high hopes that my screen will look like new again, but now I know what not to do the next time I buy something that has an LCD screen.

I use a multipurpose biodegradable cleaner to clean my LCD screens. This is a diluted solution that I use to clean the glass in my home. I have never had any problem using this on my screens. I also use this on my iPad to get rid of all the fingerprints. I have found if I use this all the time it also seems to keep the fingerprints from building up as often.

I keep a small bottle of this mixed up all the time and always spray on the cloth before wiping the screen. I don"t mind the smell of vinegar so this doesn"t bother me. Because it is diluted in water it isn"t that strong anyway and quickly disappears.

You can use this cleaning solution for a lot of other uses in your home. It is safe for you and the environment and works just as good or better than cleaning products that have chemicals in them.

I have always wondered what was the best way to clean an LCD screen. After spending that much money on something I didn"t want to ruin it by using something I wasn"t supposed to. I have just taking a soft cloth and wiping away the dust when the screen is turned off. So far this has worked OK for me, but I like knowing I can use a liquid solution as long as I don"t directly spray on the screen.

First, you run the risk of having liquid run down between the diffusion layers on the LCD, or hitting the CCFL in there and shorting out your inverter.

The second problem is that manufacturers sometimes put the T-Con board at the bottom of the TV. Or if it is a plasma. you have buffers that run along the bottom edge. Again shorting those out will kill your monitor/TV.

You don"t spray it on the screen because cleaners used to damage the seal on the bottom edge of the screen. I don"t believe is still happens as long as something reasonable is used. The warning is most likely still there simply to cover themselves if someone uses something that is much to harsh and allows it to drip down the screen.

I actually spray the liquid (i.e., eyeglass cleaner or the solution they make specifically for LCD screens) on the screen all the time, and haven"t noticed anything bad come of it. I think the fear is that the droplets from the spray makes permanent splotches on the screen. It"s there for only a brief second but maybe with the heat of the screen those splotches get burned in somehow? I"m not sure, but I"ve done it -- I wipe right away and do it when the screens turned off -- and I haven"t had any problems with it.

Clean the screen when it needs it. If you can’t see the email for the dirt, it’s time to do a little cleaning. Start with a dry, microfiber cloth–the sort you get at an optometrist’s office (you can also buy them at photo and computer stores). Move it in circular motions. Be gentle, but apply slight pressure on particularly stubborn spots.

If that doesn’t clean the screen, make your own cleaning solution by mixing distilled water (make sure it’s distilled) and white vinegar in equal proportions into a spray bottle. Turn off your laptop. Spray this mixture lightly onto the microfiber cloth, not onto the monitor. Wipe as described above, then wait ten minutes before booting up.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

Cleaning your computer screen is helpful if you can no longer see through the layer of fingerprints, food and grime. TIROT/BSIP/Universal Images Group/Getty Images

Computer screens are often the recipient of mysterious smudges, spots and marks. Not only are they distracting, but these types of screen pollution can make it difficult to see what"s on your screen. In some cases, computer screens — especially touchscreens — can even become fertile breeding grounds for bacteria.

If you"re considering the best way to clean your computer screen, here"s a great place to begin: use a clean, lint-free microfiber cloth. These fabric squares, like the ones used to clean eyeglasses, will remove dust that has built-up over time, and won"t scratch the screen in the process. Simply turn off the computer (the dark, blank screen can help you see dust and other grime) and give the screen a series of horizontal swipes in one direction followed by vertical swipes — again, moving only in one direction. If you move the microfiber cloth in circles, it moves the dust around. By working in a grid, you"ll not only remove maximum dust, but it will be easier to see what you may have missed.

What happens if you wipe the dust away, but still see spots or other indications of stubborn grime? Avoid using any type of household cleanser, like the kind you might spray on a window or counter because ammonia or alcohol-based cleaners can damage delicate screens — unless it is a glass screen like most Macs, and even then you"ll want to be judicious with an alcohol-based cleaner and avoid using anything that will scratch the surface, such as a paper towel.

Your best bet is to make a homebrew of sorts, mixing a 1:1 ratio of distilled water (don"t use tap water because it can leave mineral deposits) and white vinegar. This cleaning solution works well for screens without a glass coating, like LCD and touchscreens. Plus, if you"re unsure about the type of screen you"re cleaning, it"s better to be safe than sorry. Spray the cleaning mixture directly onto the microfiber cloth, rather than the screen.

If you need to clean your computer screen, but don"t have white vinegar and distilled water, and don"t want to make a trip to the store, disinfecting wipes can work in a pinch — but only if you are sure the screen is covered by a layer of glass.

They are recommending distilled water and white vinegar in a 50/50 mix? Can anyone confirm this as a real deal or is this just a joke? If it is, can anyone recommend me a cleaning solution for my new monitor?

Transform your design into an innovative product with our electronics manufacturing services. Scale your product with the help of a reliable manufacturing partner.

Displaytech, a SEACOMP division, is a reliable LCD display manufacturer providing displays for many of today"s products. Founded in 1989, Displaytech offers over 25 years of supplying displays. Since then, our LCD product offerings have expanded dramatically as well as our manufacturing capabilities. Our team is highly-experienced in designing, engineering, and manufacturing electronic products that feature an embedded LCD display. The Displaytech brand was acquired by SEACOMP in 2012.

Our customer base ranges from small to large companies including many Tier 1 multinational corporations. Our displays are found in a variety of products such as consumer white-goods, industrial controls, connected home automation, medical devices, and more.

Displaytech is also an Authorized Microchip Design Partner and Graphics Design Partner Specialist. We offer exceptional hardware and software engineering expertise focused on Microchip PIC24 and PIC32 microcontrollers. All of our development tools are built with Microchip compatibility in mind. Displaytech is capable of providing anything from simple technical support to complex product design for LCD based embedded devices.

Purchase Displaytech products by contacting us directly for large volume orders through this website. We also have online distribution channels through Arrow, Digi-Key, Mouser, and RS Components. In addition, we have global distributors and reps that sell our LCD products.

Established in 1998, Winstar Display Co., Ltd. is a reliable LCD Display Module Manufacturer and LCD Panel Supplier. Winstar has development of high-quality display module products. We operate worldwide, configure, service products, and also provide logistics support to deliver products and services competitively. We provide LCM Modules including monochrome TN/STN/FSTN LCM, COG LCD, TFT LCM / TFT panels, FSC-LCD, graphic LCM, character LCD displays, OLED display modules (PMOLED), custom LCD displays, OLED and LCD panel.

One of the things that sets us apart from other touchscreen display manufacturers is the level of customization we offer. Our product portfolio includes a wide range of TFT & Monochrome LCDs, OLED, touch sensor and glass technologies, which we can provide stand-alone or integrated into complete assemblies.

Our custom display, touch and cover lens solutions are used in a variety of end-user applications. For example, our touchscreens are used in many vehicle infotainment systems and dashboard controls. We also provide custom touch displays for popular marine applications such as watercraft navigation screens and fish finders. For consumer electronics, we manufacture custom touchscreen display solutions and smartphone screen protectors. Whether your application will be used in the great outdoors, a construction site, or a hospital operating room, we can build a custom, all-in-one solution for your needs.

Our strength as a custom display company comes from the extensive technical expertise of our engineering team. The approach our engineers take is always based on experience and data-driven decisions that help you find the right solution for your application. In addition, our extensive manufacturing capabilities enable us to deliver quick design cycles, cost-effective solutions, and high-quality products that will meet your specifications even in the harshest conditions. To learn more about what makes us the display manufacturer for your needs, get in touch with us today.

Jouw nieuwe radio maakt jouw keukenwerk op verschillende manieren gemakkelijker: direct onder een wandkast of plank gemonteerd, de LED-lichtlijst zorgt voor de helderheid van het werkblad. Je kan jouw mobiele telefoon via Bluetooth aansluiten en de praktische handsfree-set gebruiken tijdens het koken. Maar het belangrijkste is dat de hoogwaardige DAB+-ontvanger je voorziet van hoogwaardige radioprogramma"s en dat je je kan vermaken met muziek!

DAB+ (kort voor: Digital Audio Broadcasting) zorgt voor een briljante radio-ontvangst in een ongekende geluidskwaliteit. Als je daarentegen de voorkeur geeft aan een meer klassieke stijl, gebruikt je gewoon de extra FM-ontvanger van de MEDION-radio. Voor beide ontvangstmodi heb je 30 voorkeuzezenders en een automatische en handmatige zoekfunctie.

Bij een touchscreen wordt meestal gebruikt gemaakt van resistieve of capacitieve schermen. Een resistief scherm werkt op basis van drukgevoeligheid, terwijl een capacitief schermen de elektrische lading en warmte van je vinger registreert. Hierdoor is de bediening veel preciezer en vloeiender dan een resistief touchscreen.

Maakt het mogelijk om je apparaat op te laden via een USB-aansluiting. Sommige apparaten kun je opladen via andere apparatuur zoals laptops, computers of met je smartphone oplader.

Het totale uitgangsvermogen wordt gemeten in watt RMS en bepaalt in grote lijnen wat een versterker of speaker continu aan geluidsvermogen kan leveren zonder dat er beschadiging optreedt.

Met deze functie kun je zelf afstellen hoe je de hoge, lage en middentonen wilt horen. Wat extra bas of iets minder schel? Het is allemaal in te stellen. Bij draagbare muziekspelers vind je vaak ook vooraf ingestelde presets voor verschillende muziekstijlen als jazz, dance, rock of pop.

De fabrieksgarantie is de garantie die de fabrikant geeft. De termijn geeft de periode aan waarin je beroep kunt doen op de fabrieksgarantie. In het garantiebewijs staat waar je precies recht op hebt. Voor tweedehands producten kunnen we niet garanderen dat de fabrieksgarantie van toepassing is. Dit is in dat geval namelijk afhankelijk van het specifieke product, de fabrikant en de oorspronkelijke aankoopdatum. Wat betreft refurbished producten geeft de refurbished aanbieder de fabrieksgarantie, niet de fabrikant.

De fabrieksgarantie is de garantie die de fabrikant geeft. De termijn geeft de periode aan waarin je beroep kunt doen op de fabrieksgarantie. In het garantiebewijs staat waar je precies recht op hebt. Voor tweedehands producten kunnen we niet garanderen dat de fabrieksgarantie van toepassing is. Dit is in dat geval namelijk afhankelijk van het specifieke product, de fabrikant en de oorspronkelijke aankoopdatum. Wat betreft refurbished producten geeft de refurbished aanbieder de fabrieksgarantie, niet de fabrikant.

Negatief, positief, neutraal: we zetten een review altijd online. We controleren wel eerst of ’ie voldoet aan onze reviewvoorwaarden en niet nep is. We controleren ook of ’ie is geschreven door iemand die het artikel heeft gekocht via bol.com en zetten dit er dan bij. De controles gebeuren automatisch, al kijken er soms mensen mee. Bol.com betaalt niet voor reviews. Als een reviewer door een andere partij is vergoed, staat dit in de review zelf.

Negatief, positief, neutraal: we zetten een review altijd online. We controleren wel eerst of ’ie voldoet aan onze reviewvoorwaarden en niet nep is. We controleren ook of ’ie is geschreven door iemand die het artikel heeft gekocht via bol.com en zetten dit er dan bij. De controles gebeuren automatisch, al kijken er soms mensen mee. Bol.com betaalt niet voor reviews. Als een reviewer door een andere partij is vergoed, staat dit in de review zelf.

Makkelijk te installeren onder keukenkast. Wel een (te) sumiere gebruiksaanwijzing en DE reden voor aankoop (DAB) is gewoon ontoereikend. Het signaal is niet of amper te ontvangen ondanks het feit dat het toestel kort bij een raam hangt. Bedenk goed voor je nu een DAB koopt want de signalen zijn niet sterk genoeg.