vinger on lcd displays in stock

Chemicals can quickly change plastics / screen and I"m sure manufacturers didn"t test their products how - If there is a way at all - to restore them after contact with random chemicals.

If you"ve applied only a small amount of vinegar and your monitor was positioned in a normal direction (vertical screen) then it"s very unlikely vinegar could find its way to the electronics.

Don"t spray the screen because the mist can get in the sides and bottom/top of screen area and short out your monitor. Play it safe and spray the cloth. These things are expensive.

It is good to know that flannel is the best material to use to clean an LCD screen. I learned the hard way how important it is to use the right products to clean these screens. I was spraying on a general cleaner, with a paper towel and now my screen has a dull finish to it.

I am going to try the vinegar and water solution to see if this will help. I don"t have high hopes that my screen will look like new again, but now I know what not to do the next time I buy something that has an LCD screen.

I use a multipurpose biodegradable cleaner to clean my LCD screens. This is a diluted solution that I use to clean the glass in my home. I have never had any problem using this on my screens. I also use this on my iPad to get rid of all the fingerprints. I have found if I use this all the time it also seems to keep the fingerprints from building up as often.

I keep a small bottle of this mixed up all the time and always spray on the cloth before wiping the screen. I don"t mind the smell of vinegar so this doesn"t bother me. Because it is diluted in water it isn"t that strong anyway and quickly disappears.

You can use this cleaning solution for a lot of other uses in your home. It is safe for you and the environment and works just as good or better than cleaning products that have chemicals in them.

I have always wondered what was the best way to clean an LCD screen. After spending that much money on something I didn"t want to ruin it by using something I wasn"t supposed to. I have just taking a soft cloth and wiping away the dust when the screen is turned off. So far this has worked OK for me, but I like knowing I can use a liquid solution as long as I don"t directly spray on the screen.

First, you run the risk of having liquid run down between the diffusion layers on the LCD, or hitting the CCFL in there and shorting out your inverter.

The second problem is that manufacturers sometimes put the T-Con board at the bottom of the TV. Or if it is a plasma. you have buffers that run along the bottom edge. Again shorting those out will kill your monitor/TV.

You don"t spray it on the screen because cleaners used to damage the seal on the bottom edge of the screen. I don"t believe is still happens as long as something reasonable is used. The warning is most likely still there simply to cover themselves if someone uses something that is much to harsh and allows it to drip down the screen.

I actually spray the liquid (i.e., eyeglass cleaner or the solution they make specifically for LCD screens) on the screen all the time, and haven"t noticed anything bad come of it. I think the fear is that the droplets from the spray makes permanent splotches on the screen. It"s there for only a brief second but maybe with the heat of the screen those splotches get burned in somehow? I"m not sure, but I"ve done it -- I wipe right away and do it when the screens turned off -- and I haven"t had any problems with it.

They are recommending distilled water and white vinegar in a 50/50 mix? Can anyone confirm this as a real deal or is this just a joke? If it is, can anyone recommend me a cleaning solution for my new monitor?

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

When it comes to cleaning, flat-screen TVs and LCD screens require special care and a gentle touch. With the wrong technique, you can easily scratch the screen or damage the surface"s antiglare coating. Even rubbing too hard can cause pixels (the tiny dots that compose images on computer monitors and TV screens) to burn out and stop working permanently. Most household cleaning products are too harsh to use on electronic devices with LCD or OLED screens, so choose your TV cleaning strategy carefully. These tips on how to clean a TV screen will help protect your device while ridding it of dust, smudges, fingerprints, and streaks.

To avoid damage to your TV while cleaning, only use gentle products. Never wipe the screen with paper towels, abrasive sponges, or coarsely woven rags, which can cause scratches. Instead, use high-quality, finely woven microfiber cloths to clean TV screens, recommends cleaning expert Leslie Reichert.

You should also avoid cleaning products that contain alcohol or ammonia. These types of cleaners can remove antiglare coatings and cause images to become cloudy or distorted. A simple swipe with a microfiber cloth ($9 for 5, Amazon) is typically all that"s needed to remove dust and other debris from the screen"s surface. When more than a light dusting is required, however, use the guidelines below for the best way to clean a TV.

Practice preventative measures so you won"t have to clean TV screens often. Keep food, drinks, and kids away from TV and computer screens to eradicate risks of messy splatters and fingerprint smudges. During your weekly house cleaning, lightly dust the screens with a microfiber cloth to prevent dust buildup.

Cleaning your computer screen is helpful if you can no longer see through the layer of fingerprints, food and grime. TIROT/BSIP/Universal Images Group/Getty Images

Computer screens are often the recipient of mysterious smudges, spots and marks. Not only are they distracting, but these types of screen pollution can make it difficult to see what"s on your screen. In some cases, computer screens — especially touchscreens — can even become fertile breeding grounds for bacteria.

If you"re considering the best way to clean your computer screen, here"s a great place to begin: use a clean, lint-free microfiber cloth. These fabric squares, like the ones used to clean eyeglasses, will remove dust that has built-up over time, and won"t scratch the screen in the process. Simply turn off the computer (the dark, blank screen can help you see dust and other grime) and give the screen a series of horizontal swipes in one direction followed by vertical swipes — again, moving only in one direction. If you move the microfiber cloth in circles, it moves the dust around. By working in a grid, you"ll not only remove maximum dust, but it will be easier to see what you may have missed.

What happens if you wipe the dust away, but still see spots or other indications of stubborn grime? Avoid using any type of household cleanser, like the kind you might spray on a window or counter because ammonia or alcohol-based cleaners can damage delicate screens — unless it is a glass screen like most Macs, and even then you"ll want to be judicious with an alcohol-based cleaner and avoid using anything that will scratch the surface, such as a paper towel.

Your best bet is to make a homebrew of sorts, mixing a 1:1 ratio of distilled water (don"t use tap water because it can leave mineral deposits) and white vinegar. This cleaning solution works well for screens without a glass coating, like LCD and touchscreens. Plus, if you"re unsure about the type of screen you"re cleaning, it"s better to be safe than sorry. Spray the cleaning mixture directly onto the microfiber cloth, rather than the screen.

If you need to clean your computer screen, but don"t have white vinegar and distilled water, and don"t want to make a trip to the store, disinfecting wipes can work in a pinch — but only if you are sure the screen is covered by a layer of glass.

A light vinegar/water solution is just fine for screens, but you always apply this to a towel/rag to dampen it only (you don"t want drips dripping down into the electronics). One other thing: putting LCDs into direct sunlight, unless they are designed for this, is a bad idea too.

A microfiber cloth works best, since the material is soft and lint-free, leaving no residue or debris on the screen. If cleaning with a dry microfiber cloth alone doesn"t work, it"s possible to use a cleaning solvent. Not all solvents are acceptable for use on electronic display screens.

If that doesn"t clean the screen, make your own cleaning solution by mixing distilled water (make sure it"s distilled) and white vinegar in equal proportions into a spray bottle. Turn off your laptop. Spray this mixture lightly onto the microfiber cloth, not onto the monitor.

But never use it on an electronic screen like that on your computer, smartphone, tablet, or TV. "Vinegar can damage a screen"s anti-glare properties and even make a touch screen less responsive," says Antoinette Asedillo, an electronics product tester at CR. Use a soft sponge or cloth dampened with plain water instead.

The only difference between cleaning vinegar and distilled white vinegar is the level of acidity. They are both made through a process where alcohols are distilled from grain and allowed to ferment as microorganisms process the alcohol into acetic acid and water or vinegar.

For quick cleaning: You can clean a laptop"s case with a range of solutions, but we recommend using a microfiber cloth (paper towels leave dust) with white vinegar, or isopropyl alcohol, or water (don"t mix them). Lightly apply the cleaning liquid to the cloth and wipe down the laptop"s case.

If, and only if, you have a glass laptop screen, it"s safe to use Windex as a cleaner. Sturdier computers sometimes have a clear glass screen over the front of the display - much like a cell phone. A bit of Windex sprayed onto your microfiber cloth will certainly get the job done.

Don"t use window cleaners, household cleaners, aerosol sprays, solvents, ammonia, abrasives, or cleaners containing hydrogen peroxide to clean the screen. WARNING: Never spray cleaner directly on the screen. It may drip inside the display and cause damage.

Dab or spray a well-mixed solution of equal parts vinegar and water onto your cloth—never spray liquid directly onto the TV—and, using moderate pressure, gently wipe the cloth over the screen from left to right and then top to bottom before tackling the frame.

But back on topic, it"s generally not a good idea to use alcohol or other organic solvents to clean LCD screens, especially ones with anti-glare (matte) coating applied. The alcohol/solvents can dissolve the coating, which will effectively ruin your screen.

For glass-coated screens, you can use a mixture of equal parts water and vinegar or rubbing alcohol. For LED or LCD screens, use only water. Spray or lightly dab the solution directly onto the cloth and carefully wipe the screen from left to right.

First off, avoid corrosive substances! That means no alcohol- or ammonia-based cleaners (like diluted rubbing alcohol or Windex). These cleaners can damage your screen by stripping anti-reflective coatings, cause clouding, or worse.

Never spray alcohol or another liquid directly on your computer or laptop screen. Use another clean microfiber cloth with a small amount of 70%+ Isopropyl Alcohol or a 70%+ alcohol cleaning wipe. Wipe down your entire screen and be sure to get the edges.

No, it is too harsh. Use only water (distilled) or a 50-50 water and white vinegar solution with a microfiber or soft cotton cloth, like an old t-shirt. Can you use Clorox wipes or baby wipes to clean your laptop screen? No.

If you have a PC laptop with an LCD screen, you should not use disinfecting wipes. Manufacturers, such as Hewlett-Packard, say that active ingredients found in both Clorox and Lysol wipes could damage your screen.

Most screens come with a thin outer film that can easily wear away when you use disinfectant wipes like Clorox or Lysol, so avoid using those products to clean your laptop. If you see a glossy finish on your laptop screen, do not use any cleaning agent on the display.

To clean a flat screen TV without streaks, you need to avoid using ammonia-based cleaning products and go with distilled water or a 50/50 solution of vinegar and tap water. The cleaning agent should ideally go on a microfiber cloth for the best result.

In a spray bottle, pour the white vinegar, distilled water, and lime essential oil. Shake well to combine. To use the spray, sprinkle a generous amount of the screen cleaning solution onto the soft cloth and wipe clean the screen"s surface as needed.

Vinegar may be a mild acid, but it"s an acid nonetheless. Prolonged exposure to vinegar will damage chrome finishes by eating the finish right off of your fixtures. For the ultimate protection against limescale and hard water buildup, invest in a quality water softener for your home.

What"s the difference between apple cider vinegar and white vinegar? White vinegar has 5% to 10% acetic acid, making it the strongest vinegar of them all. It"s clear in color and has a clean, highly sour taste. Apple cider vinegar contains 4% to 6% acetic acid.

DO use a 70-percent isopropyl alcohol solution (aka rubbing alcohol). DON"T spray a cleaning agent directly on your computer"s surface. Spray your cleaner onto a cloth first and then gently wipe the cloth over the surface. DO wring out your wipe or cloth so it"s not dripping wet, just slightly damp.

Your iPhone screen is naturally resistant to water and oils, and should not require frequent cleaning, though occasional cleaning will improve the clarity of the screen and the function of the phone.

Never use cleaners such as Windex or Lysol on an iPhone screen, as these and other products will break down the oil-resistant coating and can shorten the working life of the phone.

On a microbial level, your iPhone screen is probably dirtier than most toilet seats. Which is gross, to be sure, but most microbes aren"t out to get you, so don"t sweat what you can"t see too much. And your iPhone is resistant to most oils, so you shouldn"t worry about smudging it up so much it stops working.

If your screen is dirty enough and is covered by a screen protector, consider simply replacing the protector. Otherwise, here is how you clean iPhone screens. Note that this method is primarily intended for use with the waterproof iPhone 7 and later.

And for the record, the cleaning method described here can be applied to older iPhones, too. Just be extremely cautious around the headphone jack, which is the most likely entry point for moisture and dust.

Steven John is a freelance writer living near New York City by way of 12 years in Los Angeles, four in Boston, and the first 18 near DC. When not writing or spending time with his wife and kids, he can occasionally be found climbing mountains. His writing is spread across the web, and his books can be found at www.stevenjohnbooks.com.

Don"t make the mistake of thinking that LCD screens work like your nifty new iPad. In general, touching should be off limits because pressing too hard on the screen can actually break or crack pixels. So the first rule to cleaning an LCD screen is don"t do it unless you have to (i.e. unless it"s actually dirty).

Many retailers offer special cleaning solutions for LCD screens, but the truth is that most of these are made up primarily of water. So, if you don"t want to take the time to go buy a cleaner or you want to save the money (maybe to put toward that "What Not to Wear" dress), you can just make your own LCD cleaner by mixing water with some vinegar or isopropyl alcohol -- the solution should be no more than 50/50.

You could even start with plain water and see if you need the vinegar or alcohol, which will come in handy when you"re trying to wipe away greasy fingerprints. Some people recommend only using distilled water, but regular water works fine, according to Dave Chipman from Sharp.

Unless you want to end up with a melted, discolored, hazy or scratched LCD screen, steer clear of all spray cleaners. In particular, don"t use any solvent cleaners that include acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride. You also want to avoid using any materials that could potentially scratch the screen"s delicate surface. Opt for a soft, clean, cotton cloth instead of wood-based products like paper towels and tissues. Chipman suggests using a microfiber cloth for best results.

If you"re lucky enough to have a service come in and do your cleaning for you, make sure they don"t inadvertently ruin your television or monitor by trying to clean it with something like glass cleaner. You should either take the time to explain -- and maybe even demonstrate -- how you want your LCD screen cleaned or just ask your cleaner to leave this particular job for you.

EarthLCD is a leading “Assembled In The U.S.A.” manufacturer of Industrial ezLCD “Smart” Touch Serial LCD’s for Embedded Systems, LCD Touch Monitors, Industrial Grade LCD Kits, LCD Touch Screen Kits, Industrial NTSC Monitors & Kits, Open Frame Monitors, Smart LCD Screens, Touch Screen Monitors, Industrial LCD Touch Screen Monitors, All in one Monitors, Custom OEM solutions, Integrated Solutions for OEM, LCD Touch Screen Modules, Custom LCD Display and LCD Controller Cards.

EarthLCD is a division of Earth Computer Technologies, Inc. originally founded in 1984. A full line of products plus custom engineered solutions are available. We source LCD displays direct from major manufacturers world wide allowing for a cost advantage over our competitors. EarthLCD offer’s the world’s widest variety of LCD’s in fully integrated solutions for OEM supply chain requirements.

EarthLCD targets industries such as Point Of Sale, Industrial Automation, Security, Hospitality, Kiosks, Home Automation, OEM, Gaming, Banking, Service, Test Equipment and Monitoring, Embedded Systems, Automotive, and many other applications.

The 12″ LCD Display offered by ReActiveMicro allows Replica 1, Apple ///, II, II Plus, IIe, IIc, and IIc Plus users to connect and display their Apple >composite< system to a modern monitor. NOT for IIgs RGB usage.

This high end LCD monitor allows users to connect an Apple II system and display excellent 40 column, 80 column, and color graphics. No extra adapter needed. Connect it and forget about it. Simple to use and comes fully tested and setup for plug and play use out of the box. The display comes with speakers built in and can connect to any ReActiveMicro sound card or audio card with 3.5mm audio jack.

Comes with a high quality gold connector RG-59 video cable, HDMI cable, 3.5mm male to RCA female sound cable, and power supply as pictured. Every cable you may need is included. The settings can be customized as desired using rear controls.

The 12″ LCD Display is intended to be used with the composite port connection to your Apple system, however it also offers VGA (not 15khz compatible) and HDMI inputs. The 12″ size is comparable to the Apple II Color Display size, and also travels well.

NOTE: If you plan to connect and use the Apple CRT and the 12″ LCD Display at the same time an impedance matched switch box will be required or you will suffer video quality or even no display. Be sure to always use a composite impedance matched switch box. Unit pictured is for display purposes only and the unit you receive may be slightly different or come without a remote.

Also note worthy is this should NOT be considered the “end all, be all” for Apple II to HDMI solutions. This is a low cost stop-gap for your retro needs till ReActiveMicro can complete their HDMI Adapter project. Users will find this solution decent, but will pale in comparison to any retro platform specific solution ReActiveMicro offers in the future.

I’ve used “Glass Plus” on my laptop and my 19″ LCD for about four years now. I also use the brown paper towels that are on a roll; they are used in the dispensers in bathrooms. I get the end of the roll before it is discarded.

Sorry all, but I have one related question rater than a tip. I am interested in advice on how to clean the “solid” stuff from the LCD screen. You see, it’s that during all these years, there were many “little dots” of such stuff (like small coagulated pieces of coffee etc.) that I accidentally spilled or whatever, and now they’re spreading all over my screen.

I use terry cloth dust cloths that are like magnets for dust and dirt. They are reusable and environmentally smart. I have seen them in stores, but bought mine from a catalog. You can’t go wrong.

I apologize for not having a tip, rather I do have a question. I had a LCD TV which used to look all nice and perfect. All of the sudden a big yellow stain appeared on it. I came to find out that my mother came to visit, she decided to help out with the cleaning and she applied Windex to my TV. Ever since, we haven’t been able to remove this stain. Does someone know if there is a way to remove this stain? Or am I stuck with it forever?

There don’t seem to be any reports of success for resolving this issue, so if you try any of these ideas, please let us know how it goes! Here are a few ideas that might work:

3) Put a couple drops of cooking oil on a soft cloth and polish the area. Add more oil to the cloth as needed. Any oil should be fine – olive, coconut, canola, etc.

4) This idea seems promising: wipe the area with an acrylic cleaner, such as Peek polish. If the coating on the screen has been damaged, removing the coating should resolve the issue, which is why this might work. A new anti-glare coating can be applied afterward.

Of course, if you can’t fix the problem, you might be able to replace just the screen. It’s not a cheap option, but probably better than replacing the whole device. Good luck!

Someone at Target told me that a little drop of Dawn dish soap and water works great. I’ve been cleaning my LCD TV that way for a while now and it looks and works great.

I’m got a problem that few, if any, others will have encountered: in a modern museum setting, we have several large LCD monitors that are routinely exposed to small quantities of water mist (from a simulated flash flood exhibit). During design, the quantities of water were deemed insignificant, but over time we’ve found the build-up of mineral deposits (“hard water stains”) in the form of droplets on the screens has become a problem. Does anyone have any suggestions? I’m reluctant to try any of the acidic, off-the-shelf hard water stain removers that you might use in your shower, but I’m open to any suggestions.

Manufacturers like Apple recommend cleaning with a soft cloth and a solution of water and no more than 50% isopropyl alcohol. I personally clean my screen with a microfiber cloth and water. Microfiber cloths are commonly sold as eyeglass cleaners, it is designed to wipe up dust and dirt. With the right cloth, you only need water.

I recently purchased a wide-screen LCD TV and was concerned about what to clean the screen with. I spent hours Googling the topic and here is a synopsis of what I found:

Another pretty good product to clean LCD screens with is a product called Clearview. It is an isopropyl alcohol based product which contains no ammonia. I tried it on my 40 inch LCD TV and it did a nice job on the screen.

Vinegar is not good for your LCD. I buy these little wipes at Wal-Mart in the electronics section. It is an alcohol solution in an individually wrapped packet. They work well and you get like 20 or 30 for $1.97 best of all they are good to leave in your laptop bag for on the go cleaning since they are individually packaged.

If its a larger amount of paint, you may have to buy a new LCD as removing a large amount of dried paint physically will damage the screen, and chemicals that dissolve the paint will probably melt everything, including the screen.

I was carrying my 32″ TV down to the basement and slipped on the stairs. The TV dragged across the white stair rail and left 2 large white paint marks on the LCD screen. I found your tip, tried the vinegar (it worked somewhat). I then tried the alcohol, in the mixture you stated. The alcohol worked great and left no marks whatsoever. You could never tell it happened. Thank you very much!!!

First, wipe with a damp cloth that has just a drop of Dawn on it, follow with a cloth with very little isopropyl alcohol (gets any fingerprints and smudges real good), and then follow with a dampened cloth of just water. Cloths I used were just cotton pillowcases.

Well, I’ve read every comment on here; some say don’t use vinegar or microfiber cloths, then some say DO. Well, I use the microfiber on my TV for around 2 years now and my TV is FINE! So what’s the deal? I really don’t understand why one thing says do this and the other says something different, which is RIGHT?

Why is there all this confusion???? I’ve been using wipes sold at Walmart that are specifically made to clean LCD screens and they’ve always worked great!!!

God, just spend a couple bucks for these. A lot of stores sell LCD wipes. I don’t understand why anyone would claim they damage your screen as they do not!! However-for badly spotted screens (made by soft drinks, etc), one might want to use something a bit more major. But for general cleaning, use the wipes.

I don’t recommend Monster cleaner like someone did; that stuff streaks to all heck and takes forever to come out. I made the mistake of using a damp paper cloth and though luckily, I haven’t scratched the TV screen at all, it left a little bit of white – what I’m assuming are paper towel bits – embedded into my screen. I’ve tried washing them out gently and rubbing them out and whatnot, but they just aren’t coming off. Any suggestions?

This is often the case with the internet and open forums like this. You have to remember that by posting or reading a forum like this, you are posting and reading to/from all who are doing the same thing. Not everyone who posts an answer will be an expert. So the one that is “RIGHT” is the one you think is “RIGHT” and that’s the problem; you have to have know the answer to know which one is “RIGHT,” otherwise it’s take your pick and hope the one you pick is OK. But I would always go with some form of logic and ask:

What is in most commercial cleaning LCD products? Answer: “NOT vinegar.” So most problems on the posts saying, “NOT vinegar,” are right. That said, if the screen is glass, then vinegar is good.

I did have to buy a General Electric LCD cleaner that came with a liquid solution and just applied the spray onto a special fiber that the cleaner had, and just wiped my 24″ LCD screen with circular motions all around the monitor. It looks just as if it were new, not even when sunlight hit the monitor did I ever see a stain or anything like it.

I just used Windex, sprayed on a paper towel, and now have swirls and smears on my screen. Is it okay to use the LCD wipes (i.e., will it resolve the problem)?

I just saw a video regarding this topic on YouTube. The person in the video advises isopropyl alcohol (90%) + distilled water (10%) mixture coupled with a sprayer and a cleaning cloth that is used for cleaning camera lenses.Bad idea. camera lenses are made of glass while LCD screens are plastic and need something not so strong.

I tried monster cleaner and it made a mess, taking three months to get the streaking mess off my TV. Windex doesn’t work; the best bet is distilled water and a microfiber towel. Monster is a rip-off big time, they changed it so it is no longer a good product.

Use a small bowl and put a drop of Dawn in it. Add warm water to create foam. Then, dip your microfiber cloth or what you use to clean your screen. Gently wipe, then take another damp rag to rinse it with just plain water, and dry. You have a clean screen. This is what Sony told me to do and it works. I have had no issues in three years of using this method.

I just sprayed antibacterial Pledge on my Sanyo LCD to dust it and the color in my tv is basically all green. I didn’t know there was a certain way to clean these TVs. Will the color go back to normal? What do I do?

Vinegar is an acid!! How can the internet be full of dumb people telling others to do this. If you clean your screens with vinegar, even if you dilute it, you will damage it in the long run. If you don’t have a product made for it, just use water.

Take a clean bowl. Put some vinegar in it. Add a touch, I mean one single drop, of regular Dawn in it. Use a good paper towel (not the scratchy brown ones) and use it on LCD. This will clean and smudges, dirt and most particles. Might have to give it a few wipes. Always dry ASAP after you use this method other wise it leave some streaks. As long as you clean and dry ASAP it will get your screen crystal clear.

Yes, LCD screens for computers or TVs are usually replaceable. There are also some easy methods you can use to try to fix the scratch yourself, such as with a pencil eraser, Vasaline, or a scratch repair kit.

I’m trying to read everything on this page. But, I cannot get the specific answer that I want. Sorry, but I do have a question and I want a relevant answer. The LCD on my laptop has a stain from hair dye, and I cannot remove it by using alcohol. I need help; any suggestions?

What you need to do is determine what products can be used to remove hair dye, then determine which of those products are safe to use on an LCD screen. Here is an article that lists some products that can remove hair dye stains from some surfaces: How to Remove Hair Dye from Towels. Look to see which of the ingredients you have, then search online to see if they are safe to use on an LCD screen.

I want everyone to know that vinegar on a LCD TV screen is an extremely bad idea as it will eventually cause a yellowish stain on the screen and it won’t come off, so FYI, never use vinegar on a LCD T.V screen. Use a glasses cleaner, or if you don’t have any, distilled water works too; just make sure you use the microfiber cloth that should come with the TV as it came with mine, and it works great on my screen, but use it only n the screen as using it on household appliances might ruin it and washing it might ruin it as well.

Well, I have a question about the caller ID window on my new Panasonic phone. I made a mistake and got a few drops of liniment and Cutter insect repellent on the clear caller ID window. Now, spots are on the front of it and nothing removes it. Does anyone have any idea how I can remove those spots? I am most appreciative of any help you may offer. Thanks.

Many Apple products use liquid crystal displays (LCD). LCD technology uses rows and columns of addressable points (pixels) that render text and images on the screen. Each pixel has three separate subpixels—red, green and blue—that allow an image to render in full color. Each subpixel has a corresponding transistor responsible for turning that subpixel on and off.

Depending on the display size, there can be thousands or millions of subpixels on the LCD panel. For example, the LCD panel used in the iMac (Retina 5K, 27-inch, 2019) has a display resolution of 5120 x 2880, which means there are over 14.7 million pixels. Each pixel is made up of a red, a green, and a blue subpixel, resulting in over 44 million individual picture elements on the 27-inch display. Occasionally, a transistor may not work perfectly, which results in the affected subpixel remaining off (dark) or on (bright). With the millions of subpixels on a display, it is possible to have a low number of such transistors on an LCD. In some cases a small piece of dust or other foreign material may appear to be a pixel anomaly. Apple strives to use the highest quality LCD panels in its products, however pixel anomalies can occur in a small percentage of panels.

In many cases pixel anomalies are caused by a piece of foreign material that is trapped somewhere in the display or on the front surface of the glass panel. Foreign material is typically irregular in shape and is usually most noticeable when viewed against a white background. Foreign material that is on the front surface of the glass panel can be easily removed using a lint free cloth. Foreign material that is trapped within the screen must be removed by an Apple Authorized Service Provider or Apple Retail Store.

If you are concerned about pixel anomalies on your display, take your Apple product in for closer examination at an Apple Store, Apple Authorized Service Provider, or an Independent Repair Provider. There may be a charge for the evaluation. Genuine Apple parts are also available for out-of-warranty repairs through Self Service Repair.*

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

From cinema content to motion-based digital art, Planar® Luxe Displays offer a way to enrich distinctive spaces. These professional-grade displays provide vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior decor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

Advanced LED video wall with MicroLED models in 0.6, 0.7 and 0.9mm pixel pitches, and 1.2mm pixel pitch standard LED; with powerful processing, proprietary alignment technology and off-board electronics.

LED video wall solution with advanced video wall processing, off-board electronics, front serviceable cabinets and outstanding image quality available in 0.9mm pixel pitch

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

Carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility for various installations including virtual production and extended reality.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.