2.4 inch tft lcd arduino brands

The 2.4 inch TFT Touch Screen Module with micro SD card slot is now available as a SHIELD for Arduino UNO. It has a four wire resistive touch screen, a micro SD card socket, a reset switch and a convenient Arduino Uno shield footprint.

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.

The 2.4 inch TFT LCD touch screen module suitable for Arduino, provides a large touchscreen display shield with a built in microSD socket offering a high resolution colourful display to your Arduino.

There are many tutorials on Arduino shields for 2.4 inch TFT LCD displays. In this road test I apply different tutorials to check the performance and issues of this specific shield: AZ-Delivery 2.4 inch TFT LCD display with resistive 4-wire touchscreen and an integrated SD card reader.AZ-Delivery 2.4 inch TFT LCD display.

TFT LCD is a variant of a liquid-crystal display (LCD) that uses thin-film-transistor (TFT) technology. That improves image quality, better contrast and addressability.

Depends on the needs of your project. Arduino UNO processor frequency is low. With the Arduino UNO full-color TFT LCDs are suitable to display simple data and commands. The TFT controller used cannot switch internal display RAM, so you can"t use the double buffer technique for animations but still you can only re-draw small sections of screen.

Given the limitations of the Arduino UNO the bigger the display the worse the performance. The size of this display is adequate to meet that compromise between number of pixels, display area and capabilities of the Arduino UNO.

This module consumes most of the resources available in Arduino UNO. This is not a limitation of the module itself. In return, using a parallel interface allows you to quickly update the image. If you want to take advantage of all its functionality (LCD + touch screen + SD card), only pins 0 and 1 (RX and TX, respectively) and pin 19 (A5) remain unused. If the SD card is not used, pins 10, 11, 12 and 13 are additionally available. With a suitable layout, some SPI devices could be connected even if the SD card is used.

The PCB silkscreen indicates the main function of each pin, the labels are easy to read, although it does not show labels for the touch screen pins:Pin 9 - Touch X+ / LCD_D1

The SD card reader is very well located between the USB connector and the power connector, it does not touch either of them as it happens in other lcd tft shield modules and it is easily accessible to insert and remove the SD cards.

You can directly use the shield with any arduino uno. In this case we are using an Arduino UNO that exposes all the pins both on the header and on the board. In such a way that you do not need another shield to access the pins not used by the screen

ShieldCompatible with Arduino. 5V compatible, can be used with 3.3V or 5V logic. On-board 3.3 V (300mA LDO controller). The design is very well thought out and fits Arduino UNO perfectly.

2x74LVC245A Octal Bus Transceiver With 3-State outputs. This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation. The LVC245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses effectively are isolated. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment. This chip solves the problem of how to interface 3.3V logic devices to a 5.0V logic chip such as the Arduino. Most 3.3V devices do not like being run with 5V signals and can be damaged or flaky. The 74LVC245 is designed so that even when it runs at 1.8V, it still happily accepts 5V signals in one pin and converts it to a lower logic level on the opposite pin. It has 8 pipes it can convert but it won"t work with bi-directional/pull-up based devices such as I2C or 1-Wire. It does work great for SPI, Serial, Parallel bus, and other logic interfaces.

If you want to take advantage of all its functionality (LCD + touch screen + SD card), only pins 0 and 1 (RX and TX, respectively) and pin 19 (A5) remain unused. If the SD card is not used, pins 10, 11, 12 and 13 are additionally available. With a suitable layout, some SPI devices could be connected even if the SD card is used.

The ILI9341 which can control each pixel with a small number of pins. The shield connects ILI9341"s data pins 0-7 to Arduino digital pins 2-8 (allowing parallel communication, not SPI). ILI"s RESET goes to pin to Arduino analog pin A4.CS (chip select) to A3. RS (CD command/data) to A2. WR and RD to A1 and A0.

Includes a resistive 4-wire touchscreen (touchpad). The touch screen is attached on the surface of the display. Touch screen needs two analog inputs and two digital outputs. It connects through 4 wires, which share arduino pins 8, 9, A2, A3 with the ILI9341 driver. So you can"t write to LCD display and read the touch screen in the same time. I. Driver chip is XPT2046.

The resistive touch screen does not appear to appreciably affect the optical characteristics. Works properly, It takes a little pressure with the stylus for it to respond like in old mobile phones. You notice how it sinks into the screen when you press with the stylus. The stylus that comes with the module makes it easy to use if your interface design uses small controls. Some touch screen libraries offer better accuracy by specifying the resistance of the touch screen in the X direction. Resistance can be easily measured with a multimeter by connecting the test leads to the LCD_D1 - X + and LCD_DS X- terminals. Touch is sensitive to pressure.

Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Orissa, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttaranchal, Uttar Pradesh, West Bengal and major cities including Ahmednagar, Aizawl, Ajmer, Akola, Alappuzha, Aligarh, Allahabad, Alleppey, Almora, Alwar, Amarnath, Ambattur, Ambernath, Amravati, Amritsar, Anantagir, Anantapur, Andaman, Araku, Arrah, Asansol, Aurangabad, Avadi, Ayodhya, Ayurveda, Badrinath, Bally, Bandhavgarh, Bangalore, Baranagar, Barasat, Bardhaman, Bareilly, Baroda, Bastar, Bathinda, Beach, Beaches, Begusarai, Belgaum, Bellary, Bhagalpur, Bharatpur, Bhatpara, Bhavnagar, Bhilai, Bhilwara, Bhimtal, Bhiwandi, Bhopal, Bhubaneswar, Bhuj, Bidar, Bihar, Bijapur, Bikaner, Bilaspur, Bird, Bodh, Bokaro, Brahmapur, Bulandshahr, Calicut, Chail, Chamba, Chandigarh, Chandrapur, Chennai, Chennai, Cherai, Cherrapunji, Chidambaram, Chikhaldara, Chopta, Coimbatore, Coimbatore, Coonoor, Coorg, Corbett, Cotigao, Cuttack, Dadra, Dalhousie, Daman, Darbhanga, Darjeeling, Davanagere, Dehradun, Delhi, Devi, Devikulam, Dewas, Dhanaulti, Dhanbad, Dharamashala, Dhule, Dindigul, Diu, Dudhwa, Durg, Durgapur, Dwaraka, Etawah, Faridabad, Farrukhabad, Firozabad, Flowers, Gandhidham, Gandhinagar, Gangotri, Gangtok, Gaya, Ghaziabad, Gir, Goa, Gopalpur, Gorakhpur, Great, Gulbarga, Gulmarg, Guntur, Gurgaon, Guruvayoor, Guwahati, Gwalior, Hampi, Hapur, Haridwar, Haveli, Hills, Himalayan, Hisar, Hogenakkal, Horsley-Hills, Howrah, Hubballi-Dharwad, Hyderabad, Hyderabad, Ichalkaranji, Idukki, Imphal, Indore, Islands, Itangar, Jabalpur, Jaipur, Jaisalmer, Jalandhar, Jalgaon, Jalna, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kadapa, Kakinada, Kalyan-Dombivali, Kamarhati, Kanchipuram, Kanha, Kanpur, Kanyakumari, Karawal Nagar, Kargil, Karimnagar, Karnal, Karwar, Katihar, Kausani, Kedarnath, Keoladeoghana, Khajuraho, Khammam, Kirari Suleman Nagar, Kochi, Kodaikanal, Kolhapur, Kolkata, Kollam, Konark, Korba, Kota, Kotagiri, Kottakkal, Kovalam, Kozhikode, Kudremukh, Kullu, Kulti, Kumaon, Kumarakom, Kurnool, Kurukshetra, Lakshadweep, Latur, Life, Loni, Madurai, Malpe, Manas, Mango, Maravanthe, Margoa, Mau, Meerut, Mira-Bhayandar, Mirzapur, Moradabad, Mount, Mumbai, Mussoorie, Muzaffarpur, Nalanda, Nanda, Nanded, Nandi-Hills, Nashik, National, Navi Mumbai, Nellore, Netravali, Nizamabad, Noida, North Dumdum, Orchha, Ozhukarai, Pali, Panipat, Parbhani, Patiala, Patnitop, Pattadakkal, Pondicherry, Puducherry, Pune, Puri, Purnia, Pushkar, Rajahmundry, Rajgir, Rameshwaram, Rampur, Ranchi, Ranikhet, Ranthambore, Rohtak, Rourkela, Sagar, Sangli-Miraj & Kupwad, Sariska, Satna, Shillong, Sikar, Solapur, South Dumdum, Sri Ganganagar, Srinagar, Surat, Tezpur, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirappalli, Tirunelveli, Tirupati, Tirupur, Tumkur, Udaipur, Ujjain, Vaishali, Vasai-Virar, Visakhapatnam, Vishakhapatnam, Vizianagaram, Warangal, Warangal, Wayanad, Yercaud, Zanskar, Nagpur etc. You may buy latest electronics components, accessories and development boards from us at affordable prices. Buy Raspberry Pi, Arduino, AVR, ARM, 8051 Development Boards, Wireless and Wired, Microcontroller and ICS, Robotics & Accessories, Prototyping Components, Educational Kits etc. We also provide technical assistance for products purchased from our store and supplement it with schematics, code examples and demonstrations.