toshiba satellite radius p55w-b5318 laptop lcd touch screen complete assembly br

Please kindly leave your PHONE NUMBER for shipping. And your ZIP CODE must match with your CITY NAME.Compatible Model: for Toshiba Satellite P55W-B5224 P55W-B5318 P55W-B5318D P55W-B Series

Resolution: 1920x1080 -IPSPackage includes the LCD screen + touch screen + bezel assembly + touch control board ONLY.No extra LCD cable, hinges, back cover, instruction or installation tools , etc.

Please keep your original parts. Professional installing skill required.This is an OEM product, the connector is slightly different with your original one, but they are 100% compatible and with quality warranty.The item is only available for the laptop with touch function. If you are not sure whether it is the correct item you need, please confirm with us.

Package includes the LCD screen + touch screen + bezel assembly ONLY. No extra touch control board, LCD cable, back cover, hinges, instruction or installation tools, etc.

Please kindly check your model and size again before you purchase. If you are not sure whether it is the correct item you need, please contact us with specific model and pictures of your original screen.

Item specificsCondition: Brand New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is available in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller"s listing for full detailsGrade:A+Resolution:1920x1080Size:15.6Brand:KreplacementModel number:For P55W-B seriesScreen Model:LP156WF5.SPA2 or a fully compatible modelAspect Ratio:16:9Screen type:IPSProduct type:Lcd screen+touch screen assembly with bezelCountry of Manufacture:chinaWarranty:120daysPacking:with bubble films in hard box

Today I’ll be replacing failed LCD screen assembly on a Toshiba Satellite Radius P55W laptop. I’m replacing the screen because of failed digitizer. The touch screen started showing bubbles and registering phantom touches on the screen.

In Toshiba Satellite Radius P55W laptop the LCD screen permanently attached (glued) to the digitizer. If either of them failed, the entire LCD assembly has to be replaced.

I’ve seen some eBay sellers offering touch screen digitizers separately but I really doubt you can replace it and make look factory perfect again. I tried separating the LCD screen and digitizer just to find out if it’s possible and the experiment failed completely.

It’s a good idea to disconnect the battery before taking apart the display assembly. I explained how to access the battery in this Toshiba Satellite Radius P55W disassembly guide.

Start separating the LCD screen assembly from the back cover on the top side of the display. Insert a thin case opener tool between two and pry up the LCD assembly.

Reconnect all internal cables and align the new LCD assembly with the back cover. Gently snap the new assembly back to the back cover. Start from the top and move the sides after that.

Did anyone find out how to remove bubbles? Or just replace the inner screen - I assume the top layer of glass is kept? Only the inner screen gets replaced? Because the bubbles are along the non-black part of the display… I know that the bubble started as 1 tiny smudge from opening it with one hand… now there are multiple bubbles that interfere with operation. At times, the bubble sends a “click” because the screen flashes a zillion times until I restart it - its like having a stuck key except the stuck key is the bubble……

Since it is getting worse, I need to replace the part that has the bubble embedded. I don’t want to buy a new laptop, when its just a screen, and possible a fan (2nd time replacing it - but i run on ssd so it’s not as critical since it does not get hot ).