side panel lcd display factory

We have thousands of standard products that are in stock and available from our Seattle, WA and Hong Kong warehouses to support fast product development and preproduction without MOQ. The stock covers TN, STN LCD display panels, COB, COG character LCD display, graphic LCD display, PMOLED, AMOLED display, TFT display, IPS display, high brightness and transflective, blanview sunlight readable display, super high contrast ratio display, lightning fast response displays, efficient low power consumption display, extreme temperature range display, HMI display, HDMI display, Raspberry Pi Display, Arduino display, embedded display, capacitive touch screen, LED backlight etc.  Customers can easily purchase samples directly from our website to avoid time delays with setting up accounts and credit terms and shipping within 24 hours.

Many of our customers require customized OEM display solutions.  With over two decades of experience, we apply our understanding of available display solutions to meet our customer’s requirements and assist from project concept to mass production. Using your ideas and requirements as a foundation, we work side by side with you to develop ideas/concepts into drawings, build prototypes and to final production seamlessly. In order to meet the fast changing world, we can provide the fastest turnaround in the industry, it takes only 3-4 weeks to produce LCD panels samples and 4-6 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen samples. The production time is only 4-5 weeks for LCD panels and 5-8 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen.

Important technical improvements of LCD, such as LED backlighting and wide viewing Angle, are directly related to LCD. And account for an LCD display 80% of the cost of the LCD panel, enough to show that the LCD panel is the core part of the entire display, the quality of the LCD panel, can be said to directly determine the quality of an LCD display.

The production of civil LCD displays is just an assembly process. The LCD panel, the main control circuit, shell, and other parts of the main assembly, basically will not have too complex technical problems.

Does this mean that LCDS are low-tech products? In fact, it is not. The production and manufacturing process of the LCD panels is very complicated, requiring at least 300 process processes. The whole process needs to be carried out in a dust-free environment and with precise technology.

The general structure of the LCD panel is not very complex, now the structure of the LCD panel is divided into two parts: the LCD panel and the backlight system.

Due to the LCD does not shine, so you need to use another light source to illuminate, the function of the backlight system is to this, but currently used CCFL lamp or LED backlight, don’t have the characteristics of the surface light source, so you need to guide plate, spreadsheet components, such as linear or point sources of light evenly across the surface, in order to make the entire LCD panel on the differences of luminous intensity is the same, but it is very difficult, to achieve the ideal state can be to try to reduce brightness non-uniformity, the backlight system has a lot to the test of design and workmanship.

In addition, there is a driving IC and printed circuit board beside the LCD panel, which is mainly used to control the rotation of LCD molecules in the LCD panel and the transmission of display signals. The LCD plate is thin and translucent without electricity. It is roughly shaped like a sandwich, with an LCD sandwiched between a layer of TFT glass and a layer of colored filters.

LCD with light refraction properties of solid crystals, with fluid flow characteristics at the same time, under the drive of the electrode, can be arranged in a way that, in accordance with the master want to control the strength of the light through, and then on the color filter, through the red, green, blue three colors of each pixel toning, eventually get the full-screen image.

According to the functional division, the LCD panel can be divided into the LCD panel and the backlight system. However, to produce an LCD panel, it needs to go through three complicated processes, namely, the manufacturing process of the front segment Array,the manufacturing process of the middle segment Cell, and the assembly of the rear segment module. Today we will be here, for you in detail to introduce the production of the LCD panel manufacturing process.

The manufacturing process of the LCD panel Array is mainly composed of four parts: film, yellow light, etch and peel film. If we just look at it in this way, many netizens do not understand the specific meaning of these four steps and why they do so.

First of all, the motion and arrangement of LCD molecules need electrons to drive them. Therefore, on the TFT glass, the carrier of LCD, there must be conductive parts to control the motion of LCD. In this case, we use ITO (Indium Tin Oxide) to do this.ITO is transparent and also acts as a thin-film conductive crystal so that it doesn’t block the backlight.

The different arrangement of LCD molecules and the rapid motion change can ensure that each pixel displays the corresponding color accurately and the image changes accurately and quickly, which requires the precision of LCD molecule control.ITO film needs special treatment, just like printing the circuit on the PCB board, drawing the conductive circuit on the whole LCD board.

This completes the previous Array process. It is not difficult to see from the whole process that ITO film is deposited, photoresist coated, exposed, developed, and etched on TFT glass, and finally, ITO electrode pattern designed in the early stage is formed on TFT glass to control the movement of LCD molecules on the glass. The general steps of the whole production process are not complicated, but the technical details and precautions are very complicated, so we will not introduce them here. Interested friends can consult relevant materials by themselves.

The glass that the LCD board uses makes a craft also very exquisite. (The manufacturing process flow of the LCD display screen)At present, the world’s largest LCD panel glass, mainly by the United States Corning, Japan Asahi glass manufacturers, located in the upstream of the production of LCD panel, these manufacturers have mastered the glass production technology patents. A few months ago, the earthquake caused a corning glass furnace shutdown incident, which has caused a certain impact on the LCD panel industry, you can see its position in the industry.

As mentioned earlier, the LCD panel is structured like a sandwich, with an LCD sandwiched between the lower TFT glass and the upper color filter. The terminal Cell process in LCD panel manufacturing involves the TFT glass being glued to the top and bottom of a colored filter, but this is not a simple bonding process that requires a lot of technical detail.

As you can see from the figure above, the glass is divided into 6 pieces of the same size. In other words, the LCD made from this glass is finally cut into 6 pieces, and the size of each piece is the final size. When the glass is cast, the specifications and sizes of each glass have been designed in advance.

Directional friction:Flannelette material is used to rub the surface of the layer in a specific direction so that the LCD molecules can be arranged along the friction direction of the aligned layer in the future to ensure the consistency of the arrangement of LCD molecules. After the alignment friction, there will be some contaminants such as flannelette thread, which need to be washed away through a special cleaning process.

After the TFT glass substrate is cleaned, a sealant coating is applied to allow the TFT glass substrate to be bonded to the color filter and to prevent LCD outflow.

Finally, the conductive adhesive is applied to the frame in the bonding direction of the glass of the color filter to ensure that external electrons can flow into the LCD layer. Then, according to the bonding mark on the TFT glass substrate and the color filter, two pieces of glass are bonded together, and the bonding material is solidified at high temperatures to make the upper and lower glasses fit statically.

Color filters are very important components of LCD panels. Manufacturers of color filters, like glass substrate manufacturers, are upstream of LCD panel manufacturers. Their oversupply or undersupply can directly affect the production schedule of LCD panels and indirectly affect the end market.

As can be seen from the above figure, each LCD panel is left with two edges after cutting. What is it used for? You can find the answer in the later module process

Finally, a polarizer is placed on both sides of each LCD substrate, with the horizontal polarizer facing outwards and the vertical polarizer facing inwards.

When making LCD panel, must up and down each use one, and presents the alternating direction, when has the electric field and does not have the electric field, causes the light to produce the phase difference and to present the light and dark state, uses in the display subtitle or the pattern.

The rear Module manufacturing process is mainly the integration of the drive IC pressing of the LCD substrate and the printed circuit board. This part can transmit the display signal received from the main control circuit to the drive IC to drive the LCD molecules to rotate and display the image. In addition, the backlight part will be integrated with the LCD substrate at this stage, and the complete LCD panel is completed.

Firstly, the heteroconductive adhesive is pressed on the two edges, which allows external electrons to enter the LCD substrate layer and acts as a bridge for electronic transmission

Next is the drive IC press. The main function of the drive IC is to output the required voltage to each pixel and control the degree of torsion of the LCD molecules. The drive IC is divided into two types. The source drive IC located in the X-axis is responsible for the input of data. It is characterized by high frequency and has an image function. The gate drive IC located in the Y-axis is responsible for the degree and speed of torsion of LCD molecules, which directly affects the response time of the LCD display. However, there are already many LCD panels that only have driving IC in the X-axis direction, perhaps because the Y-axis drive IC function has been integrated and simplified.

The press of the flexible circuit board can transmit data signals and act as the bridge between the external printed circuit and LCD. It can be bent and thus becomes a flexible or flexible circuit board

The manufacturing process of the LCD substrate still has a lot of details and matters needing attention, for example, rinse with clean, dry, dry, dry, ultrasonic cleaning, exposure, development and so on and so on, all have very strict technical details and requirements, so as to produce qualified eyes panel, interested friends can consult relevant technical information by a search engine.

LCD (LC) is a kind of LCD, which has the properties of light transmission and refraction of solid Crystal, as well as the flow property of Liquid. It is because of this property that it will be applied to the display field.

However, LCD does not emit light autonomously, so the display equipment using LCD as the display medium needs to be equipped with another backlight system.

First, a backplate is needed as the carrier of the light source. The common light source for LCD display equipment is CCFL cold cathode backlight, but it has started to switch to an LED backlight, but either one needs a backplate as the carrier.

CCFL backlight has been with LCD for a long time. Compared with LED backlight, CCFL backlight has many defects. However, it has gradually evolved to save 50% of the lamp and enhance the transmittance of the LCD panel, so as to achieve the purpose of energy-saving.

With the rapid development of LED in the field of lighting, the cost has been greatly reduced.LCD panels have also started to use LED as the backlight on a large scale. Currently, in order to control costs, an LED backlight is placed on the side rather than on the backplate, which can reduce the number of LED grains.

On the transparent diffuser plate, point-like printing can block part of the light. The LED backlight on the side drives the light from the side of the diffuser plate, and the light reflects and refracts back and forth in the diffuser plate, distributing the light evenly to the whole surface. Point-like printing blocks part of the light, screening the light evenly like a sieve.

At the top of the diffusion plate, there will be 3~4 diffuser pieces, constantly uniform light to the whole surface, improve the uniformity of light, which is directly related to the LCD panel display effect. Professional LCD in order to better control the brightness uniformity of the screen, panel procurement, the later backlight control circuit, will make great efforts to ensure the quality of the panel.

However, it is much simpler to use a side white LED as a backlight. The small circuit board on the far left of the figure above is the backlight of the LED.

Since the LCD substrate and the backlight system are not fixed by bonding, a metal or rubber frame is needed to be added to the outer layer to fix the LCD substrate and the backlight system.

After the period of the Module, the process is completed in LCM (LCDModule) factory, the core of this part of the basic does not involve the use of LCD manufacturing technology, mainly is some assembly work, so some machine panel factories such as chi mei, Korea department such as Samsung panel factory, all set with LCM factories in mainland China, Duan Mo group after the LCD panel assembly, so that we can convenient mainland area each big monitor procurement contract with LCD TV manufacturers, can reduce the human in the whole manufacturing and transportation costs.

However, neither Taiwan nor Korea has any intention to set up factories in mainland China for the LCD panel front and middle manufacturing process involving core technologies. Therefore, there is still a long way to go for China to have its own LCD panel industry.

In recent time, China domestic companies like BOE have overtaken LCD manufacturers from Korea and Japan. For the first three quarters of 2020, China LCD companies shipped 97.01 million square meters TFT LCD. And China"s LCD display manufacturers expect to grab 70% global LCD panel shipments very soon.

BOE started LCD manufacturing in 1994, and has grown into the largest LCD manufacturers in the world. Who has the 1st generation 10.5 TFT LCD production line. BOE"s LCD products are widely used in areas like TV, monitor, mobile phone, laptop computer etc.

TianMa Microelectronics is a professional LCD and LCM manufacturer. The company owns generation 4.5 TFT LCD production lines, mainly focuses on making medium to small size LCD product. TianMa works on consult, design and manufacturing of LCD display. Its LCDs are used in medical, instrument, telecommunication and auto industries.

TCL CSOT (TCL China Star Optoelectronics Technology Co., Ltd), established in November, 2009. TCL has six LCD panel production lines commissioned, providing panels and modules for TV and mobile products. The products range from large, small & medium display panel and touch modules.

Everdisplay Optronics (Shanghai) Co.,Ltd.(EDO) is a company dedicated to production of small-to-medium AMOLED display and research of next generation technology. The company currently has generation 4.5 OLED line.

Established in 1996, Topway is a high-tech enterprise specializing in the design and manufacturing of industrial LCD module. Topway"s TFT LCD displays are known worldwide for their flexible use, reliable quality and reliable support. More than 20 years expertise coupled with longevity of LCD modules make Topway a trustworthy partner for decades. CMRC (market research institution belonged to Statistics China before) named Topway one of the top 10 LCD manufactures in China.

The Company engages in the R&D, manufacturing, and sale of LCD panels. It offers LCD panels for notebook computers, desktop computer monitors, LCD TV sets, vehicle-mounted IPC, consumer electronics products, mobile devices, tablet PCs, desktop PCs, and industrial displays.

Founded in 2008，Yunnan OLiGHTEK Opto-Electronic Technology Co.,Ltd. dedicated themselves to developing high definition AMOLED (Active Matrix-Organic Light Emitting Diode) technology and micro-displays.

In Topway, we work side by side to help you overcome any technical and none technical challenges that may arise during product design, manufacture or installation. We can even take care of component sourcing and manufacturing for you.

LCD Transparent Displays, transparent screens, transparent monitors, see through screens, transparent touch screen technology, and kits from CDS as we have our own range of transparent screens / displays and transparent video screens manufactured for us, and as we control the manufacturing, we can not only offer more sizes than anyone else in the world, but also guarantee stable supply, long term availability LCDs with amazing quality.  We have replaced the Samsung Transparent Displays / see through Displays and LG Transparent OLEDs that are no longer available!

CDS has increased the use of these see through screens / see through displays / see through computer screens / clear monitors across the world including touchscreen computer screens combined with the transparent LCD touch screens and Transparent OLED displays.

LCD Spec: 19” transparent TN LCD side panel display with 1280 x 1024 resolution enabling the complete customization of the side panel. Users can configure the digital display to feature video wallpaper, images, or system temperatures in real-time

Once the steel panel is punched, the iBUYPOWER team sets forth on embedding the 5:4 LCD in the new-formed hole. The LCD is purchased as sort of an all-in-one solution, then parts are extracted as needed. Wiring for the panel feeds into an expansion slot box, which is another existing display splitter solution that"s been encased in a plastic shell made by iBUYPOWER.

Videos are played back from the host machine, though the panel can technically also act as a monitor (e.g. extended display or cloned, which we show in the video). Contrast isn"t ideal for normal monitor use since you"re still seeing the system internals, but it does work. Things look a bit better in person than on camera; our cameras seem to have some trouble seeing through the light guide.

Transparent lcd displays are available in a variety of colors. On Alibaba.com, you can find the type of transparent lcd displays made in a variety of materials. Such as polystyrene, inexpensive, and easy to maintain and use. Clear lcd displays in bulk are available at wholesale prices.@@@@@

Transparent lcdds are flexible because they include more things than a single-, rystal-displays, and membrane-displaysers. Clear lcdds are flexible, which include them that require more maintenance and more than the latter type of display. Find lcdds in bulk available on Alibaba.com.@@@@@

Transparent LCD displays have a variety of functions and interfaces for different products. On the other hand, LCD displays create a variety of events that will be relevant to the user and interfere with the content.@@@@@

Find the ideal type of lcd display in bulk, suppliers on Alibaba.com offer a wide variety of lcd displays in bulk. For lcd displays in bulk, it"s free to explore the wide variety of lcd displays in bulk and at wholesale prices.

I had previously used the side panels and Lexan cover for my KX3 and was thrilled when Scott came out with the same for my new KX2. I noticed the KX2 side panels are a bit more complex in their design due to the way Elecraft hogged out and recessed some of the connectors, but Scott managed to elegantly duplicate the look and feel of the original side panels while adding the needed handles. They are rock solid like the KX3 version and I’m still confused why Elecraft doesn’t put protective handles like these on all radios from the factory.

I had to learn a new way to remove the KX2 cover, which turns out to be the same way the instructional video shows on Scott’s site. You have to press in the side of the Lexan cover through the opening in the handle, and then it can easily be slid out from the handle and removed. I can see some people being a little squeamish putting pressure on the Lexan cover when removing but the stuff is bullet proof and will not break. In the end the Lexan cover will never come loose from the radio until you want to remove it and I like the added security.

I am as thrilled to have the side panels and cover on my little Elecraft rigs as I am to have the Elecraft rigs. Scott’s side panels and covers are the final touch to these amazing little rigs and they give me piece of mind that they will be protected wherever I might hike, paddle or bicycle to operate them.

Here is the NEWK-Line of replacement side panels now available for the K3/K3s, and the P3. These have been designed to provide enhanced protection for both the front panel and the rear panel of this equipment. They are heat treated Aluminum for durability and less weight. Each part is powder coated to the same finish as the factory Elecraft parts.

The front has the D-Handle much like rack mounted equipment. This allows the user a handle to move the equipment and provides some protection from large items coming in contact with the display, buttons and knobs.

These side panels also protrude past the back of the equipment to protect the connection ports. In fact, with no connections plugged in you can stand the equipment up and rest it on these protruding side panels.

To install these, you simply remove the existing side panels and reuse the factory hardware, including the feet and carry handle. You then reinstall the new Side KX panels. I was able to swap out K3 Parts in about six minutes for the first attempt. The P3 was even quicker!

This Combo will include the following:  One pair (2) panels for a K3/K3S radio and one pair (2) panels for a P3.  You will simply remove the factory panels and re-use the hardware to install the new Side KX panels in place of the factory panels.

Recap: Enthusiasts started cutting windows into their PC"s side panels some 25 years ago to showcase the hardware within. The mod quickly spread throughout the hardware and gaming community and eventually, manufacturers started offering cases with pre-installed windowed side panels. Nowadays, there"s no shortage of cases equipped with see-through side panels and RGB lighting at retail, so what"s next to make your case stand out from the crowd?

Showcase Hologram believes it has the answer. At CES, the company (formerly Showcase PC) demonstrated two sizes of its holographic side panel kit. The smaller kit is roughly a quarter the size of a standard mid-tower side panel window, while the larger offering could replace your PC"s existing side window entirely with a bit of elbow grease.

Tom"s Hardware stopped by the company"s booth at CES for a quick demo. Unlike last year"s products that consisted of panels built into cases, this year"s offerings are standalone "boxes" that can be added to any case or even run separately as a desk decoration, lowering the price and allowing folks to keep using the case they already have.

The kits draw power over USB and will interface with a mobile app to manage displayed images. Black pixels in an image will be interpreted as transparent, a rep told the publication. The spinning bits that create the effect are mounted inside an acrylic box – there"s not really much more to it than that.

iBuyPower launched something sort of similar a few years back. Its Snowblind ATX gaming PC case series featured a transparent LCD side panel that can display wallpapers, images, system information and more. It sells for $199, which seems like a solid value considering you"re getting an entire chassis along with your purchase.

A see-through display or transparent display is an electronic display that allows the user to see what is shown on the screen while still being able to see through it. The main applications of this type of display are in head-up displays, augmented reality systems, digital signage, and general large-scale spatial light modulation. They should be distinguished from image-combination systems which achieve visually similar effects by optically combining multiple images in the field of view. Transparent displays embed the active matrix of the display in the field of view, which generally allows them to be more compact than combination-based systems.

Broadly, there are two types of underlying transparent display technology, absorptive (chiefly LCDs) and emissive (chiefly electroluminescent, including LEDs and "high-field" emitters). Absorptive devices work by selectively reducing the intensity of the light passing through the display, while emissive devices selectively add to the light passing through the display. Some display systems combine both absorptive and emissive devices to overcome the limitations inherent to either one. Emissive display technologies achieve partial transparency either by interspersing invisibly small opaque emitter elements with transparent areas or by being partially transparent.

The development of practical transparent displays accelerated rapidly around the end of first decade of the 21st century. An early commercial transparent display was the Sony Ericsson Xperia Pureness released in 2009, although it did not succeed in the market due to the screen not being visible outside or in brightly lit rooms.

Samsung released their first transparent LCD in late 2011, and Planar published a report on a prototype electroluminescent transparent display in 2012.LCD technology. LG also uses OLED technology. Electroluminescent Displays enabled by Atomic layer deposition (ALD). This display technology was used by Valtra in 2017 to develop its SmartGlassSamsung and Planar Systems previously made transparent OLED displays but discontinued them in 2016.

There are two major see-through display technologies, LCD and LED. The LED technology is older and emitted a red color, OLED is newer than both using an organic substance. though OLED see-through displays are becoming more widely available. Both technologies are largely derivative from conventional display systems, but in see-through displays, the difference between the absorptive nature of the LCD and emissive nature of the OLED gives them very different visual appearances. LCD systems impose a pattern of shading and colours on the background seen through the display, while OLED systems impose a glowing image pattern on the background. TASEL displays are essentially transparent thin-film Electroluminescent Displays with transparent electrodes.

An LCD panel can be made "see-through" without applied voltage when a twisted nematic LCD is fitted with crossed polarizers. Conventional LCDs have relatively low transmission efficiency due to the use of polarizers so that they tend to appear somewhat dim against natural light. Unlike LED see-through displays, LCD see-throughs do not produce their own light but only modulate incoming light. LCDs intended specifically for see-through displays are usually designed to have improved transmission efficiency. Small scale see-through LCDs have been commercially available for some time, but only recently have vendors begun to offer units with sizes comparable to LCD televisions and displays. Samsung released a specifically see-through designed 22-inch panel in 2011. As of 2016, they were being produced by Samsung, LG, and MMT, with a number of vendors offering products based on OEM systems from these manufacturers. An alternative approach to commercializing this technology is to offer conventional back-lit display systems without the backlight system. LCD displays often also require removing a diffuser layer to adapt them for use as transparent displays.

The key limitation to see-through LCD efficiency is its linear polarizing filters. An ideal linear polarizer absorbs half of the incoming unpolarized light. In LCDs, light has to pass two linear polarizers, either in the crossed or parallel-aligned configuration.

LED screens to have two layers of glass on both sides of a set of addressable LEDs. Both inorganic and organic (OLED) LEDs have been used for this purpose. The more flexible (literally and figuratively) OLEDs have generated more interest for this application, though as of July 2016 the only commercial manufacturer Samsung announced that the product would be discontinued.LCDs in that OLEDs produce their own light, which produces a markedly different visual effect with a see-through display. The narrow gap between the pixels of the screen as well as the clear cathodes within allows the screens to be transparent. These types of the screen have been notoriously difficult and expensive to produce in the past, but are now becoming more common as the method of manufacturing them is advancing.

Unlike transparent LCDs and OLEDs that requires integrated electronic modules to process visual signals or emit their own light, a passive transparent display uses a projector as the external light source to project images and videos onto a transparent medium embedded with resonance nanoparticles that selectively scatter the projected light.

See-through screens are an emerging market that has several potential uses. Cell phones, tablets and other devices are starting to use this technology. It has an appealing appearance but more importantly it is also effective for augmented reality applications. The device can add its own twist to what is behind the screen. For example, if you look through a tablet with a see-through display at a street, the device could overlay the name of the street onto the screen. It could be similar to Google street view, except in real-time. For example, Google Translate has a feature that allows the user to point the camera at a sign or writing in another language and it automatically displays the same view, but with the writing in the language of your choosing. This could be possible with see-through displays as well.

A device using a transparent display will have much higher resolution and will display much more realistic augmented reality than video augmented reality, which takes video, adds its own supplement to it, and then displays that onto the screen.Microsoft HoloLens is an application of this idea.

These displays are also used in shop windows. The shopping windows show the product on the inside as well as show text or advertisements on the glass.

Antikainen, Mika; et al. (2012). "Transparent emissive thin-film electroluminescent display". SID Symposium Digest of Technical Papers. 31 (1): 885–887. doi:10.1889/1.1833096. S2CID 135606881.

"MIT Researchers Created a New Type of Transparent Screen Display". Boston Magazine. 2014-01-22. Archived from the original on 2019-12-13. Retrieved 2019-12-13.

online, heise. "Display Week: Die Fensterscheibe als Leinwand". c"t Magazin (in German). Archived from the original on 2019-12-13. Retrieved 2019-12-13.

Kiyokawa, K.; Kurata, Y.; Ohno, H. (August 29, 2017). "An optical see-through display for mutual occlusion of real and virtual environments". Proceedings IEEE and ACM International Symposium on Augmented Reality (ISAR 2000). pp. 60–67. doi:10.1109/ISAR.2000.880924. ISBN 978-0-7695-0846-7. S2CID 9295821.

Antonimuthu, Rajamanickam (22 January 2014). "Transparent Displays for Car Windshields and Window Advertisements". Archived from the original on 26 June 2014. Retrieved 23 January 2014 – via YouTube.

I saw a really cool video of a PC case called "Snowblind", that had a transparent LCD Screen as a side panel. I was amazed over how cool it was. The only problem was that it was really expensive. Therefore, I tried making my own! In this instructables I will go through how I made it, and how you could make your own. The best of all, since it was made from an old monitor that was thrown away, it was basically free! I just added some LED strips on the inside of the case to get better contrast on the screen. You could probably re-use the monitors backlight, but it"s safer and easier to just get some cheap LED strips.

First, remove the frame of the panel. It is fixed with clips, so just bend the frame a little and lift the frame up. Next, separate the front LCD from the backlight. For the next step, you will have to be careful. This step involves removing the anti glare film. It is glued to the panel, and therefore it"s easy to break the LCD when trying to remove it.

Then you are done modding the LCD! Now, you can hook it up to the panel and test it. Just be careful with the ribbon cables going from the LCD PCB to the panel.

The side panel of this case fits the LCD perfectly. Just line it up to the side facing the back, and to the top, and use some tape to tape it to the glass. Then, use some vinyl on the outside where the LCD is not covering the glass.

Next, use some double-sided tape to fix the LED strips to the inside of the frame. Then, solder them together in series. You can now solder on a wire and connect them to the 12V line of the Molex connector.

It"s really important to have lots of lights inside the case, to make it easier to see the LCD. Therefore, try to fill the case with even more LED strips.

You are now ready to assemble everything. In this case, the controller fit nicely in the hard drive compartment, so I glued it there and fed the ribbon cable through the hole in the inside of the case. That way it was pretty much hidden inside the case.

Now you can carefully mount the side panel back on the computer. You might have to drill a new hole for the thumb screw in the back to make it fit properly.

You can now power up the computer, open the screen settings and set it up for dual screens. You might have to flip the display 180 degrees too. When you have done that, open Wallpaper Engine and set a wallpaper of choice!

I have the same problem, I have read on google that the lcd could also be 3,3v (check if you have 3.3v lanes) so i will be trying to solder a sata cable to it because it comes with 3,3 and 5v connectors but the im not sure if save to use sata cables0

Hey I have a little question, I also have a Dell 1905FP, but I think it"s an older model because I don"t have a ribbon cable but a normal cable with a plug. My problem is that I have peeled off one film but it still looks like there is a second film on the back because it is still a little blurry. But I"m afraid that if I try to pull them off, my LCD display will break. Maybe you have an idea. Thanks in advance

Great tutorial and video! I"m trying my hand at replicating your process and I even got my hands on the exact monitor. I have reached the point where I"ve disassembled the panel and controllers, and discharged the capacitors from the PSU, but I am a little stuck at this point because I don"t know how to wire up the molex header. I watched your video and saw that you had two wires soldered to the power connector. Which connectors are they and where do they go on the molex cable? Thank you!

Terrific job! May I ask why you would need to remove the front polarizer? If my understanding is correct, both the front and back polarizers are needed in order for the LCD to work properly (i.e., the light gets polarized by the back polarizer first, and then passes through the front polarizer)? You comments will be appreciated!

Is it possible that you post or send me photos of the inside of the case when you have this installed? I"m just a bit confused on how you wired up everything?

I tried taking some photos, but I have covered the screen PCB with a cover, so it was hard to see in the photos. I basically just laid it inside the case with a 90-degree angle. I tried drawing it here: (view from the front)0

I think you should have more pics and info about the re- mounting the LCD. After all if you don"t do it right all that work is for nothing. While I understand your wiring diagram, I think that it should be explained and a larger part of this Instructible...for example to get white lite your are powering all 3 lanes (red,green,blue) on the RGB tape.

Hello, Wonderfull project, I have the same case and I would love to do it (if I have time and the screen to the right size). Just a question, can you put a photo of the cable connection to see if it"s easy to open the case ? One little suggestion, instead of connecting the panel to the graphic card (which mean to run a cable outside, why don"t you use a USB to VGA or DVI converter (like this https://www.amazon.fr/Adaptateur-convertisseur-adaptateur-Affichage-multi-écrans/dp/B079L81FRD/ref=asc_df_B079L81FRD/?tag=googshopfr-21&linkCode=df0&hvadid=227894524041&hvpos=&hvnetw=g&hvrand=17927658121409960098&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9055710&hvtargid=pla-442905712462&psc=1) ?More CommentsPost Comment

NHD-12232KZ-NSW-BBW-P | Monochrome Graphic Module | 122x32 Pixels | Transmissive LCD | Side White Backlight | STN (-) Negative Blue Display | 2x10 Pin Header Soldered

Newhaven 122x32 graphic Liquid Crystal Display module shows white pixels on a blue background. This transmissive LCD Display requires a backlight for visibility and offers a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-12232KZ-NSW-BBW-P display has a 2x10 pin header soldered. It has an optimal view of 6:00, operates at 5V supply voltage and is RoHS compliant.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.