3.5 inch tft lcd screen datasheet factory

Display brilliant colors on the Displaytech 3.5 inch TFT LCD module! This LCD display has 320 x 240 RGB resolution and uses the NewVision NV3035C single chip digital driver. The TFT driver IC supports 16M colors allowing for a range of hues to be displayed and can also support up to 22 different types of input video formats within RGB, CCIR656, and CCIR601 video formats. The 3.5” TFT is available with a touch screen panel in either resistive (single-finger or stylus pressure) or capacitive (five-finger, multi-gesture) touchscreen technology.

ER-TFTM035-6 is 320x480 dots 3.5" color tft lcd module display with ILI9488 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in microSD card slot, optional 3.5" 4-wire resistive touch panel with controller XPT2046 and capacitive touch panel with controller FT6236, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover . It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.5"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

This 3.5" display is a 320x240 resolution IPS TFT. The LCD screen includes IPS technology which delivers enhanced color reproduction, better image consistency, sunlight readable capabilities with high brightness backlight, and boasts superior optical characteristics at any angle. This 24-bit true color Liquid Crystal Display also includes better FPC design with EMI shielding on the cable. It also has a built-in ST7272A IC driver and offers the same mechanical footprint and pinout as the TN display. This TFT is RoHS compliant and does not include a touch panel.

Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.

This 320x240 resolution LCD TFT is a standard display with RGB interface, offering 24-bit true color and a 12:00 optimal view. This Liquid Crystal Display is RoHS compliant and has a 10-point multi-touch capacitive touchscreen.

Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.

This is a 3.5” IPS capacitive Touchscreen Display. The module, with a resolution of 480x320, adopts ILI9488 as driver IC and SPI (4-line) communication mode. The board integrates touch chip GT911, employing I2C communication to realize multiple touchpoints controlling. The module also integrates an SD card slot allowing you to easily read the full-color bitmap. There are two modes of wiring supplied, normal pin header wiring and GDI. The latter one requires to work with a main controller board with a GDI interface (e.g. FireBeetle-M0). You can use it with only one FPC line plugging in, which reduces the complexity of the wiring. Furthermore, it features high resolution, wide viewing angle, and simple wiring, which can be used in all sorts of display applications, such as, IoT controlling device, game console, desktop event notifier, touch interface, etc.

@brief Constructor When the screen uses hardware SPI communication, the driver IC is st7789, and the screen resolution is 240x320, this constructor can be called

@brief Constructor When the screen uses hardware SPI communication, the driver IC is st7789, and the screen resolution is 240x320, this constructor can be called

screen.drawRGBBitmap(/*x=*/(screen.width()-100)/2,/*y=*/(screen.height()-100)/2,/*bitmap gImage_Bitmap=*/(const unsigned uint16_t*)gImage_GrayscaleBitmap,/*w=*/100,/*h=*/100);

screen.drawRGBBitmap(/*x=*/(screen.width()-100)/2,/*y=*/(screen.height()-100)/2,/*bitmap gImage_Bitmap=*/(const unsigned uint16_t*)gImage_GrayscaleBitmap,/*w=*/100,/*h=*/100);

screen.drawRGBBitmap(/*x=*/(screen.width()-100)/2,/*y=*/(screen.height()-100)/2,/*bitmap gImage_Bitmap=*/(const unsigned uint16_t*)gImage_GrayscaleBitmap,/*w=*/100,/*h=*/100);

Quote: This display uses the NT57860 driver IC. I"m using the TC358860 eDP-to-MIPIDSI bridge chip, but I"m not sure whether it can drive this display panel. Is it possible to share the datasheet of this NT57860 driver IC? That way I"m able to verify that. Thanks in advance, With kind regards

PANASYS is one of the leading 3.5 inch tft lcd suppliers in China. With advanced technology, we can assure you the high resolution and good performance of our products. Welcome to contact us and get samples of 3.5 inch tft lcd, as well as product price list from PANASYS.