zebra printer with an lcd panel connect to wifi factory

The LCD Menu allows a user to configure the printer based on the needs of the application. Some configurations are password-protected. Hence, they cannot be accidentally changed.

Before you can change the parameter, you must enter the four-digit numeric password. After you have entered the password correctly, you do not have to enter it again unless you leave Setup mode by pressing SETUP/EXIT or by turning off (O) the printer.

When you have selected the digit that you wish to change, use PLUS (+) to increase the selected digit value. Repeat these two steps for each digit of the password.

You can disable the password protection feature so that it no longer prompts you for a password by setting the password to 0000 via the ^KP ZPL command.

The procedure to restore the factory default settings can be performed if the printer is not functioning properly and all the routine adjustments, settings, and troubleshooting have been attempted without success. After restoring to the factory default settings, it may be necessary to configure some of the printer settings as part of the printer set up for the specific application.

Restore specific printer, print server, and network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.

Accepted values:FACTORY (ZT410, ZT420, ZT610, and ZT620) / PRINTER (ZT411, ZT421, ZT611, and ZT621) - Restores all printer settings other than the network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually.

NETWORK - Re-initializes the printer"s wired or wireless print server. With a wireless print server, the printer also re-associates with your wireless network.

Transmissive Sensor:This is an adjustable position sensor with a red light to help you position for proper sensor placement. It can be viewed when the printhead is opened, and the printer is powered on. This sensor is used for sensing label Gaps, Holes, and Notches.

The moveable or adjustable position Transmissive Sensor must be placed so the top of the form can be detected. This can be an inter-label gap, a hole, or a notch. When using typical labels on a backing with an inter-label gap, the sensor can be positioned along the width of the label as long as it is not over the rounded edge. If using a hole or notch position, the sensor"s red light is directly under the hole or notch, so it is seen as the label"s feed. Refer to ZT410 and ZT420 Sensor Positioning for more details on positioning the moveable sensor.

The printer can be configured to position or calibrate the media after head closure or when powered on. These are configured using the LCD Display or can be configured from your utility or application.

Label Length Max Setting:It should be noted that if the printer"s Maximum Length setting is changed from the default 39”, it should be set to a value 1"" longer than the longest label you intend to use.

To view the Maximum Length setting on the printer, print a configuration label or request a configuration from your host. Refer to Printing or Downloading the Configuration Settings of a Zebra ZPL Compatible Printer.

If the printer fails to feed properly or there is a Media Out indication, perform the Manual Calibration Procedure. Refer to User Guide: Media and Ribbon Sensor Calibration.

Ribbon Loading:The printer uses a reflective plate and a sensor that shines and receives light to detect the presence of a ribbon. (Some desktop printers use a slotted wheel to detect the ribbon supply rotation). Refer to: User Guide: Load the Ribbon.

Ribbon Configuration:Select Thermal Transfer if you are using Ribbon and Direct Thermal if you are not using Ribbon. Refer to: User Guide: Print Method.

Not all media is the same when it comes to being compatible with your application or needs. Printing speed, the durability of the image/media, environment are just a few factors to consider when determining the printer setup for the application. Trying to compensate for poor media compatibility by using high printhead pressure and darkness settings can impact your printer’s printhead life.

You may need to adjust printhead pressure if printing is too light on one side, if you use thick media, or if the media drifts from side to side during printing. Use the lowest printhead pressure necessary to produce good print quality. Uneven pressure will cause ribbon wrinkle, poor print quality, and horizontal media drift.

For adjusting the printhead pressure on a ZT400 Series Printer, refer to User Guide: Adjust the Printhead Pressure. For more information regarding Printhead Pressure Details, refer to Printhead Pressure.

The printer is capable of printing at multiple print speeds. The speed selection considers the media/ribbon (if used) compatibilities since if high Darkness and Pressure settings are required to achieve good print, slower rates should be used.

If your application requires the highest print speeds, be sure your media supplier has recommended the correct media. Refer to: User Guide: Print Speed.

Print Darkness (also may be referred to as Density or Burn Temperature) is a user-adjustable setting. If you have an LCD, the setting can be adjusted to the darkness observed during printing. You can also use a setup utility or the printer webpage, if available, to set the print darkness. Avoid overheating the ribbon as it can melt if set too high. Vary the darkness to produce the best print quality. Refer to: User Guide: Print Darkness.

If the printer has a parallel port, use an IEEE1284 compatible cable. For more information, refer to Parallel Communications. (This information is also applicable to the ZT410 and ZT420 printers).

Printers with a ZebraNet Print Server option can be connected to an Ethernet Network. If your network supports DHCP, the printer can obtain an IP Address when the cable is connected.

It can be used to discover and assign the desired network settings. Refer to Discover and Configure TCP/IP Settings Using ZebraNet Bridge for more details.

It has a network setup wizard that can be used to configure your printer for a wired or wireless network. Refer to Configuring Connectivity for Wired or Wireless Networks using the Zebra Setup Utility for more details.

Configuring for Wireless communication requires establishing a local PC connection via the USB, Serial, Parallel Port or a host connected over the wired Ethernet Port. Some utilities have wireless setup capabilities and are listed below.

The ZebraNet Print Server has a Webpage accessed from a browser when you enter the printer"s IP Address. Printer configurations can be viewed and altered.

Turn off Power Save Mode and leave the other settings unchanged unless you need to set the printer up with a static IP then set the IP Addressing Protocol to Static.

Demands are rising and timelines are shrinking. Do you have the printing capabilities to keep up – without interruption? The ZT231 delivers the winning combination of the right features at the right price, along with the long-lasting quality you expect from Zebra. Fast print speeds, high-resolution print quality, large color touchscreen, future-forward design and more – all in one space-saving footprint. Plus, add optional capabilities like RFID*, wireless connectivity and media handling features when you need them.

But that’s not all. Get built-in intelligence to make your work easier, and unmatched security so nothing stands in your way. That’s how Zebra defines value.

Reduce training time with the ZT231’s easy-to-use 4.3” full-color touchscreen. See status at a glance, access wizards and helpful how-to videos and make changes with the touch of a finger or gloved hand. Seamlessly integrate the ZT231 into your existing network as it is backwards compatible and features Printer Emulations to replace other brands without having to change label formats or rewrite code.

Take advantage of Zebra’s robust, ever growing Print DNA software suite for added capabilities. Easily configure, troubleshoot and manage your printers onsite or remotely via a web-based dashboard. Compare your printer security settings against best practices and adjust to match your preferences, while protecting your data from vulnerabilities.

The benefits of buying a ZT231 don’t end at the point of purchase. Expand your printer’s capabilities with field-installable upgrades when you need them. Add options such as a cutter or peeler, wireless connectivity or even UHF RFID* encoding.

With a durable metal frame, the ZT231 is ideal for light industrial environments. Print crisp text and barcodes with optional 300 dpi resolution. Advance your label throughput with industry-leading print speeds up to 12 ips at 203 dpi. Be confident knowing you’re backed by Zebra, the #1 leader in barcode printing.

The ZT231 includes an all-new architecture to process more jobs at once and evolve with emerging technologies. Onboard analytics and printhead element out detection help you plan maintenance in advance. And, the easy tool-less platen and print head removal makes maintenance easy.

To help you make the most of your workspace, we’ve engineered the ZT231 with a space-saving, compact design and bi-fold door that reduces the height needed to open your printer. Take the trouble out of media loading with an intuitive design and color-coded cues. Adjustable sensors offer greater media flexibility and the large ribbon roll capacity lets you change media less frequently.

Take advantage of a variety of standard connectivity options including USB, Serial, Ethernet and USB Host. Tap to pair and print with compatible mobile devices with the Print Touch tag (NFC). Add a second Ethernet port, 802.11ac or an Applicator port.

Incorporate UHF RFID printing and encoding* for greater visibility and tracking. Get greater media flexibility and simple RFID calibration with Zebra’s adaptive encoding technology that eliminates complex placement guidelines.

With Zebra’s Printer Profile Manager Enterprise, part of Print DNA, you can easily manage, secure and troubleshoot your networked printers from any location. And an intuitive browser-based interface lets you see status at a glance, quickly triage issues to minimize downtime and perform updates and maintenance.

Security risks are real and costly. Endpoints are becoming popular targets – including networked thermal printers. Shield yourself from cyber attacks with Zebra’s PrintSecure, part of Print DNA. Easily configure your printers via secure connections, identify vulnerabilities, block unauthorized access and detect events before they happen.

Printing supplies provide a digital voice for assets across your supply chain. You rely on them to disseminate critical data throughout your organization. If something goes wrong with your printing supplies, operations are interrupted, productivity suffers and costs rise. That’s why we design, produce and rigorously pretest our own line of labels and tags to ensure consistent, optimized performance in your Zebra printer. For industry-leading quality, service and thermal printing expertise, choose Zebra Certified Supplies.

Access repair support services anywhere around the globe through Zebra and its trusted network of more than 10,000 partners. Zebra OneCare™ Maintenance Plans provide enhanced coverage that exceeds standard warranty.

The Zebra GX420T Thermal Transfer Printer delivers the best quality with the fastest speed and the greatest features. It offers a wide range of connectivity options, simple upgrades, and integration with its programming languages and reduced total cost of ownership as Energy Star qualified printer.

GX42-102710-000 Zebra GX420T standard features include thremal transfer print mode, 4" print width, 203 DPI, tear bar, RS-232 auto-sensing serial, Centronics parrallel, USB 1.1, 4MB standard flash, 8MB standard SDRAM, EPL2, ZPL II, USB cable, North America Power cord. Printers are shipped with windows drivers & multi-language user documentation CD Rom.Thermal Transfer Print Methods

TheZebra GX420T Thermal transfer printing uses a heated ribbon to produce durable, long-lasting images on a wide variety of materials. Badge Label Thermal transfer printers can accept a wider variety of media than direct thermal models, including paper, polyester, and polypropylene materials. Badge Label Thermal transfer printers can create extremely durable wristbands, asset tags, and certification labels, in addition to common labels, tags, and tickets. The specific label material and ribbon must be carefully matched to ensure print performance and durability.

By selecting the right media-ribbon combination, as well as specialty adhesives, users can create archival-quality labels to withstand temperature extremes, ultraviolet exposure, chemicals, sterilization, and more. Typical thermal transfer applications include: product identification; circuit board tracking; permanent identification; sample and file tracking; asset tagging; inventory identification; certification labels such as UL/CSA; laboratory specimens; cold storage and freezers; and outdoor applications.

The GX42-102710-000 Zebra GX420T Badge Label Printeris available with thermal transfer, combines and intuitive design and optional LCD user interface with versatile connectivity. It supports the widest range of applications and can be integrated into almost any environment so that you can improve efficiency and profitability, save time and reduce operator training.

To meet changing expectations and growing demands for devices that are mobile, intelligent and connected to the Cloud, Zebra created a new software platform to support its devices: Zebra’s Link-OS environment. This innovative solution makes Zebra printers even easier to integrate, manage and maintain than ever before—from any location.

The Link-OS environment is highly flexible, allowing new and creative ways for users to develop applications that interact with Zebra printers from mobile devices located anywhere in the world. Users can perform updates, gather data, and make smarter business choices from new analytic-driven insights.

Supports Microsoft Windows keyboard encoding (and ANSI), Unicode UTF-8 and UTF 16 (Unicode Transformation Formats), XML, ASCII (7 and 8 bit used by legacy programs and systems), basic single and double byte font encoding, JIS and Shift-JIS (Japanese International Standards), Hexadecimal encoding, and custom character mapping (DAT table creation, font linking, and character remapping).

A complete suite of free software applications and drivers to configure printer settings, design and print labels and receipts, get printer status, import graphics and fonts, send programming commands, update firmware, and download files. Clone printer settings and send graphics, files, fonts, and firmware (updates) to one or more Zebra® Ethernet and locally connected printers with ZebraNet™ Bridge.

An action you just performed triggered a security alert and blocked your access to this page. This could be because you submitted a SQL command, a certain word or phrase, or invalid data.

Uma ação realizada por você disparou um alerta de segurança e bloqueou seu acesso à página. Isso pode acontecer porque você enviou um comando SQL, uma palavra ou frase específica ou dados inválidos. Se isso continuar acontecendo, crie um arquivo de arquivo morto HTTP (siga essetutorial) com uma reprodução do problema e envie o arquivo para a gente.

Una acción que acaba de realizar activó una alerta de seguridad y bloqueó su acceso a esta página. Podría ser debido a que envió un comando SQL, una cierta palabra o frase, o datos no válidos. Si sigue ocurriendo, cree un archivo de almacenamiento HTTP (siga estetutorial) con el problema reproducido y envíenos el archivo.

Eine Aktion, die Sie soeben ausgeführt haben, hat eine Sicherheitswarnung ausgelöst. Ihr Zugriff auf diese Seite wurde blockiert. Möglicherweise haben Sie einen SQL-Befehl, ein bestimmtes Wort, einen bestimmten Ausdruck oder ungültige Daten eingereicht. Wenn dies andauert, erstellen Sie eine HTTP-Archivdatei (Anweisungen hier), in der das Produkt reproduziert wird, und senden Sie sie dann an uns.

Une action que vous venez d’effectuer a déclenché une alerte de sécurité et a bloqué votre accès à cette page. Vous avez peut-être envoyé une commande SQL, une expression ou un mot donné, ou des données non valides. Si le problème persiste, créez un fichier d’archive HTTP (suivez cedidacticiel) avec le problème reproduit, et envoyez-nous ce fichier.

Een actie die u zojuist hebt uitgevoerd, heeft een beveiligingsmelding geactiveerd. Uw toegang tot deze pagina is geblokkeerd. Een mogelijke oorzaak is dat u een SQL-opdracht, een bepaald woord of een bepaalde woordgroep of ongeldige gegevens hebt verzonden. Als dit probleem zich blijft voordoen, maak dan een HTTP-archiefbestand (volg dezezelfstudie) waarin het probleem is gereproduceerd. Stuur dit bestand vervolgens naar ons.

Una tua azione ha fatto scattare un avviso di sicurezza e ha bloccato il tuo accesso a questa pagina. L’inconveniente potrebbe essere causato da un comando SQL, una determinata parola o frase, oppure dati non validi. Se il problema persiste, crea un file di archivio HTTP (come indicato in questoarticolo) riproducendo l’errore e inviacelo.

This article is designed to outline the full scope of the Zebra Printer troubleshooting process overcoming problems that might arise during normal use. Throughout this process, the Zebra Printer will be reset to factory default settings in order to help resolve issues. At the end of each step, there are links to articles containing more...

Press Go ten times. Make sure that all the LEDs light up to indicate the print server has been reset to its default settings. The machine will restart.

It is possible to configure this printer using a graphical user interface (html). Enter the printer"s IP address into a web browser to open the user interface. The default username/password for both brother printer models is: admin/access

For WIFI connections, it may be easiest to connect the printer via Ethernet initially and enter configuration changes through the printer"s GUI using a web browser. The printer"s LCD screen usually turns itself off before the settings are entered through that interface. If you reset the network settings to their default values & power cycle the printer, it will prompt for whether you want to enable the WLAN interface.

Factory Defaults - Resets the printer to the factory default settings. Some configuration settings are not returned to their initial ‘out of box’ settings. The process performs a standard media calibration and then a memory defragmentation routine.

Once the printer has entered the Factory Default mode, the status light will turn amber for three (3) seconds. During that time you may do two things: Do nothing and the printer will reset the factory defaults automatically as described above OR press and hold the feed button to enter a factory default reset modes for printers with a network (Ethernet, Wi-Fi or Bluetooth) printer option. Releasing the button after the first flash resets the network factory options only. Releasing the button after the second flash sequence (two flashes) will reset the printer defaults only. Releasing the button after the third flash sequence (three flashes) will reset both printer and network settings.

For best-in-class print speed, print quality, productivity, and management simplicity, choose the ZD620. As the next generation in Zebra’s desktop printer line, the ZD620 advances the legacy of Zebra’s popular GX Series and ZD500 printers, rising above conventional desktop printers with premium printing performance and state-of-the-art features. Available in both direct thermal and thermal transfer models, the ZD620 meets a wide variety of application requirements. The ZD620 delivers superior print speeds – 8ips @ 203 dpi and 6ips @ 300 dpi. The high-resolution 300 dpi option enables printing of small labels and 2D barcodes.

With support for both EPL and ZPL, as well as many non-Zebra printer languages, deployment and upgrading is fast and easy — just unplug your existing printer, plug in the ZD620 and you’re back up and running.

You get virtually every modern connectivity option – ZD420 printers come standard with USB v2.0, Bluetooth Low Energy, RS-232 serial, and 10/100 Ethernet. For blazing fast wireless connectivity, a factory-installed 802.11ac with Bluetooth 4.1 option is available.

The standard three-button user interface with five LED status icons replaces the typical single button/single light interface common in desktop printers, and an optional 10-button interface with a color LCD interface makes configuration a snap.

Using the included Print Touch tag (NFC), workers can pair a compatible mobile device in a split second. You can monitor and manage all your ZD620 printers, along with other Zebra mobile, desktop and industrial printers from the cloud for unsurpassed management simplicity. The ZD620 runs Link-OS and is supported by our powerful Print DNA suite of Applications, Utilities and Developer Tools that give our printers better performance, simplified remote manageability, and easier integration.

And our optional Zebra OneCare service will help you maximize the availability and productivity of your ZD620 printers with unmatched from-the-manufacturer support that covers everything — from worn out printheads to normal wear and tear. The ZD620 — delivering the maximum throughput, print quality and manageability you need to keep your business moving.

Print DNA, powered by Link-OS® is Zebra’s robust printer operating system, and is supported by a suite of applications, utilities and developer tools to simplify printer setup, management and monitoring

1D symbologies: Code 11, Code 39, Code 93, Code 128, ISBT128, UPC-A, UPC-E, EAN-8, EAN-13, UPC and EAN 2-or 5-digit extensions, Plessey, Postnet, Standard 2-of-5, Industrial 2-of-5, Interleaved 2-of-5, Logmars, MSI, Codabar and Planet Code