multiple lcd displays quotation

* What kind of inspection you can provide?Aiyos has multiple tests from material purchasing to finished products by different departments, like QA, QC, sales

1. Hello, we are looking for a TFT LCD, 3.5", 1000 nits or more, parallel interface, best view from top (hour 12). If you have it, please send me the datasheet and the quotation for 2 samples and for 200 pcs per order. Best regstrds

LCDQuote.com is a specialty stocking distributor and repair provider of LCD displays. We"re located in the shipping corridor of Southern California, conveniently just miles away from the west coast hubs for both FedEx and UPS -allowing for extended shipping hours to get critical parts on their way to you.

In May of 2003, we started in a small two-bedroom apartment in Anaheim, CA and have since grown into a 14,000 sq. ft. warehouse with over 1,200 sq. ft. of a Class 1000 cleanroom, thousands of test fixtures, and complete display refurbishment capabilities. We"ve built a name for ourselves in carrying over 7,500 models of displays, touchscreens, and inverters in stock (Yes, In Stock!) with the ability to test over 95% of the displays that we ship.

Professional LCD monitors maintain superior image quality at all angles. Using H-IPS, S-IPS, S-PVA or MVA LCD technology, professional LCD monitors offer dramatically improved experience for multi-screen arrays, but are more costly.

Consumer LCD monitors lose 50% of their image quality outside the center 60 degrees of viewing. Slight changes in viewing angle can cause major color shifts.

Consumer TN LCD technology is employed by laptops and LCD monitors sold in retail stores. TN viewing angle specs do not reflect loss of quality off axis. TN LCDs also have lower color accuracy due to 6-bit color, causing related hues and shades to appear identical, and have limited color range (72% NTSC gamut).

Look at the sample images stored on your LCD picture frame. For my frame, all of the sample images were 856x480 pixels. To determine this, right click on the image file, and select Properties. You should see a number of tabs, one of which should be called “Details.” Click on the details tab; under Image you should see a width and height. Write this down or keep the window open, because we will use it to set up PowerPoint.

Take the smaller of the two numbers (usually the height), and divide that by the larger number. In my case, 480/856=0.5607. Checking the table below (which shows common screen image ratios), I can see that the native images on my LCD picture frame are just about in 16:9 format.

Open PowerPoint, and start a new presentation. On the ribbon, click Design, Page Setup. In the setup dialog box, select the image format that matches the native format of your LCD picture frame. We do this because it helps prevent the software driving the frame from cropping or stretching the images unnecessarily. Click Home on the ribbon.

At this point, your presentation should have two slides: The initial default title slide, and your newly inserted blank slide. Click on the first slide (the title slide), click your right mouse button, and select delete. You should be left with a single blank slide in your presentation, sized to the native image size of your LCD picture frame.

In many cases, the picture won’t fill the slide because it’s in a different format than the native format for the LCD picture frame. Thus, we’ll need to resize the image to fit. At the same time, we don’t want to distort the image either. Here’s the most straightforward approach:

4. My LCD picture frame doesn’t let you change the display time for pictures, and some of the transitions happen too quickly to allow you to read the entire quote. You can do what I did, which was to make two copies of every slide. PowerPoint is creative in its naming; the slides are called Slide1.jpg, Slide2.jpg, et cetera. I named my copies Slide1a.jpg, Slide2a.jpg. The file system sorts the original and the copy together when the files are named this way, so every quote is displayed twice with an intervening transition.

5. If you don’t have a lot slides suitable for quotes, consider visiting a site like Interface Lift, which has a wide range of images in a variety of formats for desktop wallpapers. Chances are, you’ll be able to find images in a format suitable for the native format of your LCD picture frame.

Liquid crystal display (LCD) is a flat panel display that uses the light modulating properties of liquid crystals. Liquid crystals do not produce light directly, instead using a backlight or reflector to produce images in colour or monochrome.

Liquid crystal display (LCD) is a flat panel display that uses the light modulating properties of liquid crystals. Liquid crystals do not produce light directly, instead using a backlight or reflector to produce images in colour or monochrome.

The TFX is a rugged military-grade high performance 2U rackmount LCD display offering either three 17.3” or 19″ TFT LCD displays. Display enhancement options include optically bonded vandal and EMI shielding. The system is built to military standards and includes a military-grade wide temperature range LCD controller and other rugged components. The military grade LCD controller can accept VGA, DVI-D, S-Video, Composite and HDMI inputs.  The TFX also includes an audio amplifier with speakers.

We stock hundreds of displays to serve any application you may have.  All displays are safely packed in hard cases with all cables and accessories included.  All of our displays are available with tabletop stand or wall mount hardware at no extra charge.  Floor mounting stands or custom installation needs are extra.  We can usually fabricate custom installation to your specifications or we can design specifications for you.  Just let us know what you need and we can help.

ViewStation Universal:Environmentally sealed LCD enclosure for use indoors and outdoors. The ViewStation Universal digital signage enclosure is ideal in high traffic areas where vandalism, theft and various weather concerns pose problems. Available in sizes ranging from 32″ to 75″ in single and double sided configurations.

ViewStation Passively Cooled:Vented LCD enclosure for use indoors or outdoors with limited weather exposure.  The ViewStation Passively Cooled display enclosure does not require fans or filters to maintain and is compatible with most popular manufacturer’s LCD mounts. The passively cooled enclosure is made to order based the LCD.

Many healthcare facilities require products that are rated “anti-ligature” (or ligature resistant) to protect patients and prisoners from harming themselves and/or others. It is particularly popular for lounges and activity rooms to have LCD enclosures installed, so that individuals can watch TV and relax. Facilities must take into consideration the area that the LCD will be used and choose the safest possible solution to avoid injury.

ViewStation Full Sun:Outdoor LCD enclosure for use in direct sunlight, all weather environments.  The ViewStation Full Sun is designed around the use of a 47″ high bright LCD for visibility in the toughest digital signage applications.  Available in landscape orientation, the ViewStation Full Sun LCD enclosure can be mounted on the wall, ceiling or pedestal.

ViewStation Array:House multiple LCDs within one ViewStation Array enclosure.  Ideal for video wall applications that require additional protection from high traffic areas, vandalism and/or weather concerns.  Many configurations are available for indoor and outdoor digital signage projects.  Enclose as few as two LCDs or as many as six LCDs.

The InfoStation Interactive Touchscreen Kiosk brings the world to your fingertips!  From wayfinding, to directories, to web pages, the InfoStation is the strongest tool to bring information to consumers. Paired with a 42-inch projected capacitive touchscreen LCD and a PC signage player, the InfoStation kiosk delivers interactive digital signage.

I have seen some i2c LCD backpacks like that before. Some have the solder jumpers on the back of the board and some don"t have a way to set it all since the address pins are directly wired to GND or VCC, I consider both a poor design.