tft lcd for raspberry pi manufacturer

Raspberry Pi Screen 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 1/ 2/ 3/ Molde 3B + Black PC Various Systems 5-point Touch Control Drive-free Backlight Independent Control

Tips: Please use the HDMI cable and USB cable that comes with the product to connect the HDMI and USB ports of the motherboard. The USB interface of the USB cable is plugged into the USB interface of the motherboard for touch and power supply. .

Step 3: insert the Micro SD card into the Raspberry Pi, connect the HDMI cable to the Raspberry Pi and the LCD, connect the USB cable to any of the 4 USB ports of the Raspberry Pi, connect the other end of the USB cable to the USB port of the LCD, and then give the Raspberry Pi Power-on. If the display and touch are normal, the drive is successful (please use the 2A power supply).

2. Connect one end of the MicroUSB cable to the USB Touch interface of the LCD (any of the two MicroUSBs) and the other end to the USB port of the computer.

The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.

Attention: If you use this display without a Pi, the touch function is not available because the touch function of this display just supports the Raspbian system. Meanwhile, an extra HDMI cable also is required for the video transmission.

The 3.5 inch RPI lcd display TFT Capacitive Touch Screen is a display module can be applied to Raspberry pi 3 B+ Pi Zero etc. It can be used as raspberry pi x window display terminals.

The RPI LCD Display TFT Capacity Touch Screen Modules used 28 pins out of raspberry pi 40 pin. When installing the module attention to align the first leg of the raspberry pi and LCD module.

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.

It is the cutest, little display for the Raspberry Pi. It features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay. It’s designed to fit nicely not only to the Pi Model A or B but also works perfectly fine with the Model B+/2B/3B.