lcd screen keyboard quotation

Rack LCD consoles with a 19 inch industrial monitor and 104-key keyboard with touchpad / optical mouse in a 1U high rackmount drawer. The LCD keyboards are equipped with a 2-position lock handle and pull out drawer designed for 19 inch wide rack cabinets.

The 19-inch (1280x1024) LCD panel is a TFT active type digital to digital which connects to the on board conversion board. The LCD monitor comes with a standard DVI connector on the back of the rackmount drawer for your pc system connection. The OSD function lets you adjust the LCD monitor for the best view. All the OSD buttons are located on the front of the LCD monitor for easy access. The monitor can be tilted to a 110 degree horizontal angle. The auto-shutoff function enables whenever the monitor drawer is returned to its resting position. This allows you to save LCD monitor life. The tempered glass is added on the front of 19-inch LCD monitor to prevent impact damage to the LCD monitor. Optional: resistive-type touch screen with RS 232 port connector.

The keyboard and touch-pad (USB type) are mounted on the front of the rackmount drawer underneath the LCD monitor, Both of them come with a standard USB type connector on the back of the rackmount drawer for your pc system connection. The slim-type (notebook size) keyboard comes with function key and key-pad functions.

The low profile 1U drawer saves on rack space and integrates an LCD monitor, keyboard and pointing device to a complete unit. The dual ball-bearing slide rails are mounted on each side of the drawer that enables you to pull-out the LCD monitor or keyboard/touch pad drawer separately from the 19" rack cabinet. The key- lock is installed on the front panel to lock the drawer inside the rack when the monitor keyboard drawer is not in use.

The CCX rackmount LCD keyboard drawers offer all the features you need for your harsh environment application. This extremely rugged, military-grade design has passed a rigorous set of MIL-STD-810G tests. The LCDs are best in class offering LED backlights and long product availability. A variety of sophisticated military-grade LCD controllers are offered to accommodate virtually any input signal including DVI-D, HDMI, VGA, Video and even HD Component. Rugged 5052- H32 aluminum construction and sealed, NEMA4 spill-proof keyboards are standard features.

General Digital integrates the latest advances in LCD display technology including 15"–19" panels. All of our active matrix TFT LCD screens offer up to 16.7 million colors, wide viewing angles and fast response times (suitable for live video).

A sealed gasket is installed between the display and bezel to protect the monitor’s electronics from dust, liquids (e.g., spilled coffee) or other debris. In addition, an optional glass or polycarbonate overlay can be added to the design to protect the LCD display.

Flexible configuration of the electronics. Customers can configure their SlimLine product with a wide variety of LCDs, backlights, video controllers, display overlays, pointing devices, slides and enclosures (standard or custom) to meet their specific requirements.

Additional information on the specific design aspects of the SlimLine Series is provided in the paragraphs that follow. If your application requires a low-cost LCD monitor/keyboard/pointing Device, we offer the capable SlimLine Commercial.

The SlimLine 1U (SL1) has an extremely low profile, occupying only one vertical rack unit (1U = 1.75"). Constructed from a combination of aluminum and steel to provide a rugged, cost-effective and flexible design platform, this formidable monitor/keyboard is intended for use in industrial and military applications. It achieves this ultra-low profile by hinging an LCD from behind the keyboard, such that the display lies flat (facing upward) and behind the keyboard when stowed in the rack.

A spring coil latch and machined handle firmly secure the display in its stowed position. The LCD hinges upward on continuous friction hinges such that it can be positioned at virtually any angle that the operator desires, from 0 to 90+ degrees.

Interface connectors for video, keyboard, pointing device and power are located on the rear of the enclosure, facing inward, to reduce the overall depth. By default, the monitor is configured to operate from +12 VDC or +24 VDC. Optionally, an integrated AC switching power supply is available.

The SlimLine 1U can be configured with a variety of LCD display sizes and resolutions, with options available for high brightness, sunlight readability and NVIS compliance. A variety of display overlays and surface treatments (e.g., antireflective, antiglare) are available to protect the LCD or to add other functionality and performance.

A vast assortment of commercial-, industrial-1 and military-2grade keyboards are available for integration, with or without integrated pointing devices. Multiple keyboard protocols are supported including PC (USB, PS/2, AT, XT) and SUN® (Type 5 [8-pin Mini-DIN], Type 6 [USB]), as well as custom or proprietary interfaces.

The low profile SlimLine Lite II (SL2) is the premiere, fully-integrated LCD monitor/keyboard/pointing device for 19" rack chassis applications. Although it integrates many of the same components as a laptop (i.e., LCD, keyboard, pointing device) and physically resembles one as well, its 2U high (3.50") enclosure has been designed specifically to endure the harsh environments of industrial, commercial-off-the-shelf (COTS), and military applications. The flip-up display head folds over the keyboard and pivots up using torque-adjustable friction hinges, allowing operators to optimize the viewing angle. Our design technique also ensures the smallest enclosure footprint (height and depth) in the industry.

A Rack Adaptor facilitates installation of the SlimLine Lite II into a 19" RETMA rack, functioning as both a drawer and a protective case. The SlimLine mounts to the Rack Adaptor via a pair of integrated, ball bearing slides that permit the monitor/keyboard to be slid in and out of the rack, and lock into place. A hinged bezel on the Rack Adaptor latches to the unit to prevent it from moving either horizontally or vertically when subjected to vibration while in the stowed position.

The SlimLine Lite II can be configured with a variety of LCD display sizes and resolutions, with options available for high brightness, sunlight readability and NVIS compliance. A variety of display overlays and surface treatments (e.g., antireflective, antiglare) are available to protect the LCD or to add other functionality and performance.

A vast assortment of commercial-, industrial-1 or military-2grade keyboards are available for integration with, or without, integrated pointing devices. Multiple keyboard protocols are supported including PC (USB, PS/2, AT, XT) and Sun® (Type 5 (8-pin mini-DIN), Type 6 [USB]), as well as custom or proprietary interfaces.

LCD faces downward (facing integrated keyboard) when in the stowed position, protecting the LCD from falling debris or external stimuli while in the rack chassis.

General Digital has created dozens of “standard” enclosures that serve as baseline designs for our customers. Inherently, these designs possess configuration flexibility allowing customers to choose the standard electronics (e.g., display, video controller, keyboard and trackball, power supply), as well as the optional electromechanical options such as display overlays (e.g., touch screens, vandal shields, heaters, EMI filters), I/O connections (e.g., video, touch, power) and other engineering services (e.g., optical bonding, film laminations).

Unlike plastic enclosures (commodity products), whose mold is usually designed for one specific display and set of control electronics, our modular and “customizable” enclosures offer superior configuration flexibility. Our modular and flexible designs permit us to readily introduce contemporary display technologies and optional electronics (e.g., heaters, touch screens, EMI filters, Smart Card [CAC] readers) with minimal modifications to our existing designs, if any.

Our products are intentionally designed to support multiple LCD display models (and other control electronics) from a variety of OEM manufacturers (e.g., Sharp, NEC, Samsung, LG, AU Optronics, etc.). This capability enables us to minimize the impact of a single suppliers’ decision to obsolete, allocate or redesign their display/electronics, upon our ability to maintain configuration control or extend the manufacture life of our products. It also allows us to provide our customers wih the best electronics to suit their application requirements.

Interface connectors on the SlimLine 1Uare located on a pair of connector panels located at the rear of the main enclosure, on either side of the display head assembly. The number and size of the connectors is limited by two factors—the amount of surface area available on the connector panel, and the amount of interface cables that can be routed along either side of the display head assembly to reach the connector panel. Connections are provided for the keyboard, pointing device, power and at least one video input source. If desired, additional connectors can be added by increasing the overall depth and/or the depth of the connector panel.

Interface connectors on the SlimLine Lite IIare located on the rear of the main enclosure. Typically, connections are provided for the keyboard, pointing device and power, as well as any connections provided on the edge card of the integrated video controller. The video controller is internally mounted at the rear of the enclosure with its edge card directly exposed to the operator to eliminate the need for expensive and space consuming interface cables. For this reason, it is very important for customers to select the proper video controller with all of the required interfaces located on the edge card. In some cases, additional interface support can be supplied, provided adequate surface area is available on the connector panel.

Watertight gaskets (e.g., closed cell, neoprene, rubber, single-sided adhesive, double-sided adhesive, O-ring). These gaskets may be provided between the LCD (or overlay) and the front bezel to prevent liquids from entering the enclosure through the display opening.

General Digital can integrate virtually any LCD display size/resolution, from almost any panel manufacturer (OEM), into our SlimLine enclosures. To assist in selecting the right panel for your application requirements, we have provided a list of commonly used or recommended panels for standard/low luminance, high brightness, sunlight readable and NVIS-compatible needs. New display models are constantly being introduced to the market by the LCD manufacturers, making it extremely difficult for us to maintain a comprehensive list. For this reason, we encourage you to speak with a Sales Engineer to share your price and performance objectives, so we can assist you in making the best display selection.

LCD backlight produces sufficient luminance for use in office, shaded and low ambient/darkness light levels. However, luminance is insufficient to overcome reflected light for use in direct sunlight.

This type of technology boosts the efficiency of the backlight’s light utilization and minimizes surface reflection of ambient light. It is a transmissive LCD module that produces high contrast images, even in bright outdoor light and direct sunlight. These displays feature a wider color reproduction range than reflective LCDs. Featuring an LED backlight, these displays consume very little power and produce very little heat, making them ideal for integration into fully sealed enclosures, which are devoid of ventilation holes and cooling fans to dissipate heat. They also provide the additional benefit of a wide operating/storage temperature (as great as -30°–85° C), so that they can endure exposure to greater internal ambient temperatures. As a design note, we have found that these panels work best when coupled with an overlay that has an antireflective (AR) coating. Overlays that inhibit transmissivity (e.g., resistive touch screen) or have antiglare (AG) coatings will significantly reduce the panel’s performance in high ambient lighting conditions. Since transmissive displays produce greater brightness from their LED backlights than traditional transflective displays, they are regarded as a better outdoor solution, as they can generate high contrast in total darkness, in direct sunlight or on a cloudy/hazy afternoon.

T-EVT technology uses the high brightness/efficiency LED backlight as a light source while minimizing the surface reflection of ambient light. The result is an LCD that produces high contrast images even in bright outdoor light or direct sunlight.

T-EVT technology uses the high brightness/efficiency LED backlight as a light source while minimizing the surface reflection of ambient light. The result is an LCD that produces high contrast images even in bright outdoor light or direct sunlight.

In order to mount any of the SlimLine Lite II devices into a RETMA 19" Rack Chassis, a corresponding Rack Adaptor Kit must be purchased. The specific Rack Adaptor is dependent upon the length of the SlimLine Lite II which, in turn, is dictated by both the size of the LCD as well as the keyboard. A detailed description of each adaptor kit is provided below:

A hinged door is supplied with the Rack Adaptor Kit that provides a decorative and homogeneous fascia for the SlimLine Lite II when it is stowed within the rack. It serves a secondary function of locking the display head in place when the device is subjected to shock and vibration. A cutout in the bezel fits over the handle located on the SlimLine Lite II’s LCD display head.

A pair of brackets can be purchased that are designed to provide additional restraint of the SlimLine Lite II LCD Display Head Assembly. The brackets attach to the Rack Adaptor Kit. When the SlimLine Lite II is returned to its stowed position, the brackets apply gentle pressure to the top of the LCD Display Head Assembly, preventing the Assembly from bouncing under shock or vibration.

A myriad of display enhancements and services are available such as: Sunlight Readable and/or NVIS LED backlights, optically bonded overlays, vandal shields, touch screens (various technologies), EMI/RFI filters, antireflective coatings/antiglare etching, heaters and optical bonding.

General Digital can embellish the performance of a flat screen panel with a multitude of optical, electrical or mechanical overlays in the form of products and services, as shown in the interactive graphic below.

Optical bonding is a process in which OBL adheres an overlay (e.g., touch screen, vandal shield, EMI filter, heater) over the surface of an LCD display using an index (of reflection) matched, optically clear adhesive. By using an adhesive that is index matched to the LCD and the overlay, OBL can reduce the amount of internal reflections within the Optical Stackup [display plus overlay(s)], thereby increasing the contrast of the display passively (without requiring additional power or energy). Adding an antireflective coating to the viewing surface of the overlay further improves contrast by reducing the surface reflections. The combined reduction of reflected light allows more of the LCD’s backlight brightness to reach the user’s eye without being “washed out.” Optical bonding is especially useful for applications that will be used in high ambient lighting or direct sunlight.

Optical bonding is also used to create vandal shields or to strengthen the protection in front of the LCD. Optical bonding can also be used to eliminate air gaps between the LCD and an overlay to prevent the buildup of moisture and/or condensation when exposed to high humidity.

I understand that when you need to press the (“)key twice or press it once followed by a character to get the quotation mark (“) printed on the screen.

(“) key twice or press it once followed by a character to get the quotation mark (“) printed on the screen. As this is by design for the US - International keyboard.

Stealth’s 1U Rack Drawer with built-in Monitor & Keyboard, model FR-1010-19 has been designed for easy installation into standard 19″ rack cabinets. The high strength slide-rails have lockable fixed positions to prevent movement when typing. In its resting position the Stealth LCD monitor measure only 1.75 inches or 1U in height providing a significant cost savings by using less rack space.

Stealth’s ultra-thin LCD monitors come equipped with built-in keyboard and touch pad mouse connecting to USB ports. The base model FR-1010-19 features a 19″ display supporting 1280 x 1024 resolution and a VGA Video input (HDMI + DVI-D with audio optional).

Standard units ship with a built-in 110/220VAC power supply. Optional DC Power inputs of  12/24/48/125/250VDC are also available. Other FlatRack models are available with a range of LCD sizes, Widescreen, KVM Ports, and various video inputs.

Stealth’s 1U Rack Drawer with built-in Monitor & Keyboard, model FR-1010-17 has been designed for easy installation into standard 19″ rack cabinets. The high strength slide-rails have lockable fixed positions to prevent movement when typing. In its resting position the Stealth LCD monitor measure only 1.75 inches or 1U in height providing a significant cost savings by using less rack space.

Stealth’s ultra-thin LCD monitors come equipped with built-in keyboard and touch pad mouse connecting to USB ports. The base model FR-1010-17 features a 17″ display supporting 1280 x 1024 resolution and a VGA Video input (HDMI + DVI-D with audio optional).

Standard units ship with a built-in 110/220VAC power supply. Optional DC Power inputs of  12/24/48/125/250VDC are also available. Other FlatRack models are available with a range of LCD sizes, Widescreen, KVM Ports, and various video inputs.