color lcd module v1.0 in stock

This is a 2.2” TFT LCD Display Module with an input voltage of 3.3V~5.5V, which is used to display colorful patterns and characters. The fastest screen refresh speed is about 256ms. The module is able to display multiple patterns in a cycle and realize dynamic display effect. At present, there are 19 common defined colors in the library, and users can also customize16-bit color codes. If we take the central point of the display as the origin of coordinates, the maximum absolute value of the positive and negative axis will be 64.

*Hated* the stock LCD that came with my Ender 6, and since I was moving from Marlin to Klipper, I decided to check out my options. I discovered user AmICoolYet on Thingiverse had created a replacement LCD mount/cover that fits perfectly in place of the stock screen (ignore the quality of my printed copy -- I had major support issues when it printed, and the darned thing warped -- it"s since been re-printed).

It"s Thingi #5156115, if anyone is interested. This replacement LCD cover accepts a standard 5" DSI screen, so I decided to try this BTT PI TFT50. Works perfectly, connected to a Pi 4b, with Mainsail / KlipperScreen installed. The touch surface / interface is quite responsive, and the screen is just large enough for me to be able to interact with any UI element on the screen. Best thing about having replaced the screen is that I don"t need to use a custom patched version of Klipper / KlipperScreen, which apparently ends up being less functional. :)

This is a 2.2” TFT LCD Display Module with an input voltage of 3.3V~5.5V, which is used to display colorful patterns and characters. The fastest screen refresh speed is about 256ms. The module is able to display multiple patterns in a cycle and realize dynamic display effect. At present, there are 19 common defined colors in the library, and users can also customize16-bit color codes. If we take the central point of the display as the origin of coordinates, the maximum absolute value of the positive and negative axis will be 64.

the driver written in MicroPython; this driver is included by default in recent versions of the pyboard firmware and you can just do "import lcd160cr" to use it.

This display comes with male header pins already soldered on the back of the module. The header pins plug directly into a pyboard with female headers.

The 12″ LCD Display offered by ReActiveMicro allows Replica 1, Apple ///, II, II Plus, IIe, IIc, and IIc Plus users to connect and display their Apple >composite< system to a modern monitor. NOT for IIgs RGB usage.

This high end LCD monitor allows users to connect an Apple II system and display excellent 40 column, 80 column, and color graphics. No extra adapter needed. Connect it and forget about it. Simple to use and comes fully tested and setup for plug and play use out of the box. The display comes with speakers built in and can connect to any ReActiveMicro sound card or audio card with 3.5mm audio jack.

The 12″ LCD Display is intended to be used with the composite port connection to your Apple system, however it also offers VGA (not 15khz compatible) and HDMI inputs. The 12″ size is comparable to the Apple II Color Display size, and also travels well.

NOTE: If you plan to connect and use the Apple CRT and the 12″ LCD Display at the same time an impedance matched switch box will be required or you will suffer video quality or even no display. Be sure to always use a composite impedance matched switch box. Unit pictured is for display purposes only and the unit you receive may be slightly different or come without a remote.

Alluvodna strankaRaspberry PiEnclosures Boxes CasesLCD TFT OLED Display for RPiAccessories Cables Power SuppliesmicroSD Memory Card & AdapterRaspberry PI Single-board ComputerCamera for Raspberry PiShield & Board for Raspberry PiWiFi for Raspberry PiKeyboard & Touchpad for Raspberry PiRaspberry Pi Kit Pack bundleRELAY BOARDGSM/GPRS/3G/4G/LTE/WiMax/5G/GSM BOARDS FOR RASPBERRY PIRaspberry Pi 400 (Pi400 RPI400)Raspberry Pi Compute ModuleRaspberry Pi PicoRaspberry Pi Zeromicro:bitmicro:bit KITArduinoBREAKOUT BOARDS, Accessories & CablesArduino KitOriginal ARDUINO BoardsOriginal ARDUINO ShieldsARDUINO BoardsARDUINO ShieldsARDUINO Box EnclosuresESP32 ESP8266Development Tools8051 Development ToolsMicrochip AtmelBREAKOUT BOARDS & SHIELDSARM Development ToolsCypress PSoC DevelopmentProgrammersData LoggersSTMICROELECTRONICSWeb ServerAndroid MINI PC / Development Kit.NET Micro FrameworkFPGA ALTERA Intel Xilinx Lattice Microchip CPLD ASICSingle board Linux computerJTAG ToolsMAXQ2000System On ModulesFREESCALEParallax Basic Stamp PropellerBeagleBoard BeagleBoneCubieboard Cubietruckx86 Vortex86Banana PiODROIDFTDI Chip’s FT90x, ..OLIMEXOnion (Omega2)Základné doskyAI - Deep Learning - Neural NetworkJetson (NVIDIA)SparkFun MicroModBIOMETRIC MEDICAL E-Health Sensor EEG EKGEnclosures Boxes CasesWearable electronic / E-TextilesPrototyping SADY STAVEBNICECompilers & SoftwareSingle Board ComputerMotor DriverElectronic Components / Battery / Memory cardM5StackMeasuring instrumentsDigital OscilloscopesSpectrum AnalyzersWaveform GeneratorsDigital MultimetersPower SuppliersUniversal CountersLogic AnalyzersLCR MeterPower MeterHandheld Digital MultimeterNon-invasive AC Current SensorData loggerData AcquisitionImaging IR ThermometerDC ELECTRONIC LOADS - Elektronická záťažLCD TFT OLED e-paper0.9 - 5" LCD display5 - 8" LCD display8 - 16" LCD displaye-Paper / E-INKOLED / AMOLEDCOG, VFD, Character/Monochrome LCDDisplay AccessoriesIoT (THE INTERNET OF THINGS)SONOFFComplete Robots3D Printer, Bluetooth Printer, Thermal PrinterGaming System ArcadeVyberame / WE LOVE TRENDUnipiNUMATO

This development kit includes everything needed to get started with the 3.5" EVE module: a 320x240 display mounted on an EVE2 graphically accelerated PCBA, a Seeeduino, an EVE breakout board, jumper wires, USB cable and a ribbon cable. We even assemble this kit and pre-load some demonstration software so that you can have a functioning module in your hands within seconds.

Because the display module includes an EVE (embedded video engine) chip, it"s a perfect choice for an HMI. EVE is a graphics controller solution that can control both display and audio operations. Additionally, Bridgetek/FTDI supports the EVE chip with graphical design toolchains to aid in development.

This kit consists of a CFAF320240F-035T a 320x240 3.5" Full Color TFT LCD module mounted on a carrier board (CFA-10074). The carrier board supports a current driver for the LED backlight of the display.

This TFT LCD display module is perfect for the designer who"s looking to have a graphic and audio processor already embedded in the display unit. Powered by an FTDI/BridgeTek FT810 Embedded Video Engine (EVE) graphics accelerator chip, simply send over a few commands via SPI or I2C and the EVE will put your stored image up on the display. Need to draw a line, create dials/knobs/buttons, or rotate an image? Send a handful of bytes and the EVE will take care of it.

ER-TFTM080-2 is 800x480 dots 8" color tft lcd module display with RA8875 controller board,superior display quality and easily controlled by MCU such as 8051(C51), PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

The product is displayed in a 1602 LCD blue screen. It integrates clocks, alarms, and alerts. It can also display temperature and humidity synchronously. It can be embedded in the chassis. The board contains 1302 chip to...

It is a 2.0 inch TFT display module.TFT liquid crystal has a semiconductor switch for each pixel,and each pixel can be directly controlled by dot pulses,so each node is relatively independent and can be continuous...