ender 3 lcd screen factory

At first I hadn’t considered that I’d flashed the firmware. I was under the impression that you needed an Arduino and a bunch of cables to do that. That was in fact the case with the original Ender.

However, since the arrival of the Ender V-2, both the Ender 3 and Ender 3 Pro models ship with a motherboard which can flash firmware via the SD slot.

The LCD display controller module is a perfect fit for your Ender-3/Ender-3s/Ender-3 Pro and other 3D Printers. It is very easy to install and you can replace your problematic displays with this brand new LCD display.

Daniel Crosslink, welcome back to another guide where I"m switching out the Ender 3 v2 color screen on the Ender 3 v2 for a monochrome 12864 LCD screen - WHY? Watch the video above. This is the full written guide how to do it.

However, the display on the Ender 3 v2 is not able to show those new menu items because it has it"s OWN firmware that I apparently cannot change because the firmware is not open source.

This was such a big disappointment that I decided pretty soon that I"d like to change back to the good old 12864 LCD display to get my features and control of the screen back.

First, I am printing a new display holder because this LCD 12864 display doesn"t fit to the display holder of the Ender 3 v2. You will find the display holder STL files for download here on my Thingiverse page. You need to print both parts seperately and then glue them together.

These are referring to what control unit you have on the display. Honestly, I cannot know which one works with YOUR display but for me, the RET6_12864_LCD did work.

In the last couple of weeks, I"ve extensively tested the Ender 3 v2 for print quality and long term results and if you"ve missed that review, I"ve linked it here for you to check it out.

Now that we know the mainboard version, let"s head over to the creality3dofficial.com website. Head over to the support section and select "Firmware Download".

Insert your SD card to your PC and Copy the DWIN_SET folder to the SD card. Make sure that your SD card is not larger than 32 gigabytes, because the mainboard otherwise might not support reading it.

If you run into the issue of a black screen after doing this or the printer starts beeping continously, you somehow missed one of the steps or mistakenly tried to flash a wrong version of the firmware to your mainboard.

If you liked this article and video, you"re probably also interested to watch my initial build video, the timelapses and the Ender 3 v2 review after 150h of printing here:

I recently had the same problem blue screen no response, Using 240v 13 A outlet found a 13A fuse in the mains plug, 15A fuse on the control board and the capacitor C11 near the X limit switch socket completely destroyed along with the adjacent resistors R11 and R4. replaced the fuse in the mains plug with 2 A fuse, probably try a 5A fuse in the control board. There is also a fuse in the power supply socket Switch which is my next target. When I have finished doing this I might fit another 4.27 board ( fitted with a 5A fuse) and re-flash the the firmware. QC control at the factory might have averted the problem if they had fitted the correct fuse on the control Board.

... but it works fine and fits well. I left some space around the LCD as mine was a little unstuck when I got it and wasnt sure of the factory position. ...

# Ender 3 V2 LCD Mount Left I printed a left LCD mount from Thingiverse that had multiple makes and comments saying "perfect fit". It was a perfect waste of filament and time. So I took half an hour to replicate the original right side mount from...

Ender 3 V2 LCD Mount LeftI printed a left LCD mount from Thingiverse that had multiple makes and comments saying "perfect fit". It was a perfect waste of filament and time. So I took half an hour to replicate the original right side mount from...

*Read the display easier!* This mount places the original Ender 3 LCD sideways on an angle. ___ **You"ll have to constrain the lcd-cable to prevent it from getting caught by the bed.** - You can open the control-box and losen the lcd-cable to get...

... note, this was designed for the v1.2. Unsure about the fitment of other versions. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20+ Filament: Generic PLA Black Category: 3D Printer Parts

This fixed the issue I was having where my LCD would randomly cycle through the menu by itself when printing. ... Many believe this is due to excessive vibration so this should help!

Remix of Screen mount / Support écran Ender 3 V2 by Justbio - https://www.thingiverse.com/thing:4708037 I needed to move the LCD screen a bit down because of other accessories that are mounted on the X-motor mount.

I printed the closed version so i can drill a hole in the tabletop and run my ribbon cable on the inside. Original design: https://www.thingiverse.com/thing:4586351I was able to use the factory screws that hold the LCD screen to the metal...

I made this to mount my LCD screen to the front of my Ikea Lack enclosure. I am mounting the raspberry pi to the back of the enclosure, so i did not need extra space under the LCD screen. This cover is shorter than most so that you can screw the LCD...

This is the sleeve case for the raspberry pi, with a camera slot, paired with a LCD screen mount for the ender 3 V2. If you use the tent style creality enclosure, the lcd doesnt fit inside the enclosure, so you need to relocate it outside the...

Upgraded my Monoprice Select Mini V2 main board to a BTT SKR Mini E3 V2 and needed a compatible display, so chose an Ender 3 original display. Only requires one ribbon cable in EXT3 and compiles in Marlin with CR10_STOCKDISPLAY.

This mounts the stock Ender 3/Pro LCD slightly forward and to the right of the stock mounting. It cleanly mounts the stock LCD plate in the centre of the 4040 extrusion, giving an extra 20mm of clearance from the side of the print bed. It is a loose...

... the lightweight IKEA LACK table. I remixed with the Ender 3 & Ender 3 Pro - Minimalist LCD PCB Case by jckz82, http://www.thingiverse.com/thing:3127377. ...Added a small screw to the mounting bracket slot, to keep the whole thing from sliding out.

This is a remix of the bottom piece of the minimalist lcd pcb mount for Ender 3/Ender 3 Pro (https://www.thingiverse.com/thing:3127377). It lets you slide the LCD case beneath the bed, and it easily slides forward and backward so you can tuck it out...

right hand mount for ender 3 screen, changed out my geeetech A10 to ender parts and used this mount. "ender screen mount 2 " is laid back more so if you are using a shorter hot end this will work much better than the first frame. easy way to tell the...

There are multiple designs for cabinets and cases that hold the 3D printers. I wanted a sleek, as small as possible, external mount so that I could move the LCD outside of...

This simple mod allows you to relocate the Ender 3 controls & display to the top 2020 rail, as per the pictures Note, you will need the following to make this work -Extended 10-pin ribbon cable (about 1 meter is needed - I managed to pick up the...

I wanted to fit a Big Tree Tech ( BTT ) TFT35 v3.0 LCD Screen to my Ender 3 Pro but I wanted to keep the overall width of the printer down but other versions of this mount move the screen over too far so the SD card conflicts with the Bed adjustment...

... the right side of your Box. LCD_Wallholder_Left to mount your LCD on the left side of your Box. LCD_holder_Top to mount on top of Your Box/Desk LCD_holder_Bottom to mount underneath a Box/Desk The Backplate is the original old version from jckz82.

I have my Ender 3 V2 setup so the extruder side is facing me, so having the LCD mounted on the side was better for my layout. I couldn"t find anything else that I could use to mount in this orientation, so had a go and custom made this one based off...

... also now 50% less material is needed, as one screw both holds the panel and the adapter in the extrusion. Other M4 cuts a thread and supports LCD. ...

The reason I use M3 here is they are cheaper and generally more abundant than M5. Included is the step file. ...Prototype in the picture has layer shifts from pausing haha hopefully yours will be...

Desktop / notebook computers, tablets, processors, motherboards, digital cameras, camcorders and projectors, 3D printers, 3D scanners, and CD/DVD duplicators may be returned within 15 days of purchase. All other products may be returned within 30 days of purchase. Merchandise must be in new condition, with original carton/UPC, and all packaging/accessories/materials. If you need to return software, a game or a movie, remember that you may not retain any copies - it"s not legal, and it"s not nice.