dynojet lcd display for sale

Will ONLY work with (PCV, or WBC2, or Autotune) Real time fuel adjustments Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected) Weather resistant for use in all conditions Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software High contrast display, viewable in direct sunlight

The LCD Display connects to any Power Commander PCV (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

The unit can be removed easily from the bike and programmed with a desktop computer. Maps can be downloaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is �user upgradeable� using the supplied USB cable and free downloads available on Dynojet"s website under downloads and map downloads.

The LCD Display connects to any Power Commander (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

The unit can be removed easily from the bike and programmed with a desktop computer. Maps can be downloaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is �user upgradeable� using the supplied USB cable and free downloads available on Dynojet"s website under downloads and map downloads.

Featuring a robust array of options, you can toggle the display, so the data most important to you is front-and-center. The POD-300 can log channels to internal memory, then access them when you’re done riding through our Power Core software (only available for Windows computers). This display module connects to your Power Commander V/6 or Wideband 2 device network through a CAN cable (included).

The POD-300 is weather-resistant, so it can be used in any environment. The high-contrast display is easily viewable in direct sunlight. It includes a velcro backing for easy installation and removal, or you can purchase a handlebar mount separately (SKU #61300062).

Please note that the POD-300 is a display module only, which is used in conjunction with Power Commander V, Power Commander 6, AutoTune or Wideband 2.

DescriptionThis LCD Display connects to the Power Commander V (PCV) via a quick disconnect cable. While connected, the unit will display all the available data from the PCV such as throttle position, RPM, percent of fuel change and injector duty cycle. The LCD Display utilizes a touch screen, making setup and navigation easy. It accepts a 1 GB SD memory card (1GB is the maximum useable size) to allow logging of data being displayedfor later analysis.

The PCV USB software now allows you to compare two map files without the Power Commander connected. There is a numerical display as well as a brand new graphical display.

The button adjustment has been made easier by introducing a "startup delay". This lets the user have enough time to start the bike and then switch the PCV USB into "button adjust" mode. The ranges of the buttons are now displayed in the software. Simply connect the unit to the computer and press one of the buttons. Their ranges are shown on the screen.

Shipped with Dynojet base map unless otherwise specified. Brock"s Performance mapping is not available and will not function correctly with other exhaust systems!

A "Track" map begins its life on Brock"s Dynojet Model 250 Dynamometer (located in Dayton Ohio @900 ft. above sea level in our climate controlled facility). Utilizing an air/fuel probe, we obtain the correct air fuel mixture for precise metering throughout the entire operation range to match our exhaust systems. This map is then "adjusted" (trade secret!) at the drag strip by the Brock"s Performance Research and Development Department to maximize performance with the bikes own ram-air system operating at speed. The ram-air system cannot be correctly pressurized on the dyno, so real world adjustments are made and measured (to one hundredth of a mile per hour) at the drag strip.

Das Dynojet LCD Display ermöglicht die Darstellung und Aufzeichnung aller vom Powercommander V, Autotune oder Widebandcommander 2 erfassten Werte des Fahrzeuges

Das Dynojet LCD Display ermöglicht die Darstellung und Aufzeichnung aller vom Powercommander V, Autotune oder Widebandcommander 2 erfassten Werte des Fahrzeuges Der perfekte Data-Logger... mehr erfahren »

Das Dynojet LCD Display ermöglicht die Darstellung und Aufzeichnung aller vom Powercommander V, Autotune oder Widebandcommander 2 erfassten Werte des Fahrzeuges

Kein Problem, mit dem POD 300 Display sind Sie nur wenige Klicks von von vielen Features aus dem übersichtlichen Menue entfernt! Maptuning in Echtzeit