3.5 tft lcd shield ili9486 for sale

This display can be mounted on an Arduino Mega or Due. It has a fairly high resolution of 320*480 pixels and is also quite large with 3.5 inch LCD size.

Arduino Uno was designed explicitly for IoT hardware development and robotics application and many more memory hunger applications. In most of the electronics projects involving the Arduino, it would be extremely delighted to have a display through which we can monitor the vitals of our project. 3.5 Inch TFT Uno LCD Touch Screen display module designed specifically for Arduino Uno, using the latest Linux Core system. 3.5 inch TFT LCD display screen comes with a built-in microSD card connection.

This 3.5 Inch TFT LCD is a colour active matrix TFT liquid crystal display with a resistive touch screen. The TFT display provides a resolution of 480×320 pixels with colourful and 18-bit, 262,000 different kinds of shade, providing a better display. This 3.5 Inch TFT LCD Screen display has an ILI9486 controller IC which supports MCU Interface. In this, a resistive touchscreen is attached to the display, so we can detect finger presses anywhere on the screen. It is a 4-wire resistive touch screen with a 12-bit 125kHz sampling SAR type A/D converter.

This 3.5 Inch TFT LCD Screen display works on SPI Protocol (serial peripheral interface) to communicate with the main processor. It does not require any external power source or cases to mount it. 3.5 Inch TFT LCD Touch Screen highly recommended operating at a voltage alone 5V/2A power adapter. This is because the PC’s USB port may have not enough power to support both uno and LCD. Moreover, It supports the FBCP software driver, allowing it to configure software resolution, and set up dual-display. These display modules are mounted with high-quality immersion gold surface plating. This Touch Screen Module shield with Micro SD slot especially for UNO and MEGA, driven by ILI9486 Single Chip Driver.

Shield for Arduino Uno consisting of a TFT LCD display with 3.5" resistive touch screen, ILI9486 graphic controller, 480x320 pixel resolution, 65,000 colors, white LED backlight, SD card slot and SPI interface. Ideal for creating applications that need to display data, photos and videos. Suitable for interfacing with Arduino Uno, it is also compatible with Fishino, Nucleo, Xnucleo, MAKERUNO and UNO PLUS (see related products).

ER-TFTM035-6 is 320x480 dots 3.5" color tft lcd module display with ILI9488 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in microSD card slot, optional 3.5" 4-wire resistive touch panel with controller XPT2046 and capacitive touch panel with controller FT6236, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover . It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.5"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.