ascii lcd display for sale

Winstar offers a wide range of standard Character LCD modules for customers" application. Our LCD character displays are available from 8x2, 12x2, 16x1, 16x2, 16x4, 20x2, 20x4, 24x2 through to 40x4 formats with 5x8 dot matrix characters. The LCD panel technologies include TN, STN, FSTN, FFSTN types and also with polarizer positive mode and negative mode options. There are different LED backlights are available in various colors including yellow/green, white, red, blue, green, amber, and RGB LEDs as well as no backlight option.

To meet the demands of customer applications, these character LCD displays are available with viewing angles of 6:00, 12:00, 3:00, and 9:00 o"clock. Winstar offers various IC options of character fonts including English/Japanese, western European, eastern European, Scandinavian European, Cyrillic (Russian), and Hebrew/Arabic. These LCD character module and LCM Modules can be used on industrial and consumer"s applications including entrance guard"s equipment, telegram, medical device, car and home audio, white goods, game machine, toys and etc.

The Parallax Serial LCDs (liquid crystal displays) can be easily connected to and controlled by a microcontroller using a simple serial protocol sent from a single I/O pin. The LCD displays provide basic text wrapping so that your text looks correct on the display. Full control over all of their advanced LCD features allows you to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. They support visible ASCII characters Dec 32-127). In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. An onboard piezospeaker provides audible output, with full control over tone note, scale and duration using ASCII characters Dec 208–232.

The LCDs currently for sale are updated to Revision F. Basic functionality remains the same, but power requirements and the layout of the backpack have changed. Please see the documentation for information on your model.

This 2×16 character LCD Module with BLUE Backlight uses an I2C interface to communicate with the host microcontroller. This budget-conscious LCD is used on projects requiring the display of text, data, or ASCII characters of all types. Connect to Vcc, Gnd, SDA (serial data line), and SCL (serial clock line). This is a 5VDC device and will be found on the I2C bus at address 0x27 / 0x3F.

desertcart is the best online shopping platform where you can buy Parallax 27977 LCD Display, 16 x 2 Character, Serial Backlit ASCII Dec 32-127 from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Parallax 27977 LCD Display, 16 x 2 Character, Serial Backlit ASCII Dec 32-127 to and more cities in Antigua and Barbuda. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Parallax 27977 LCD Display, 16 x 2 Character, Serial Backlit ASCII Dec 32-127 speedily without the hassle of shipping, customs or duties.

desertcart buys Parallax 27977 LCD Display, 16 x 2 Character, Serial Backlit ASCII Dec 32-127 directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Parallax 27977 LCD Display, 16 x 2 Character, Serial Backlit ASCII Dec 32-127 from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

Nextion is a Human Machine Interface （HMI） solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development.

Using the Nextion Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider, etc.) and ASCII text-based instructions for coding how components interact on the display side.

Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions.

Abstract: 16x2 lcd HD44780 hitachi 16x2 lcd LCD ASCII CODE 16x2 LCD ASCII table CODE 16x2 HD44780 16x2 16x2 lcd HD44780 16x1 LCD command lcd display 16x2 LCD display module 16x2 HD44780

Text: software developed for this application implements driver API code for a 16x2 LCD Module with appropriate , character LCD display that is fitted with a Hitachi HD44780 controller. This 16x2 character LCD uses the , characters displayed per line characterize LCDs into 16x2 , 40x2, and 40x4 dimensions. An LCD requires a , eZ80Acclaim! MCU is a 16x2 character LCD controlled by the HD44780 controller by Hitachi. It features the , Related DDRAM Address for a 16x2 LCD Character Generator ROM Busy Flag The LCD Module"s HD44780

Abstract: 16 pin diagram of lcd display 16x2 hd44780 16x2 lcd keypad 4x4 24 pin diagram of lcd display 16x2 LCD ASCII CODE 16x2 16 pin diagram of HD44780 lcd display 16x2 display 16x2 lcd 16x2 instruction set 4x4 keypad to bcd

Text: 16x2 LCD only AN018801-0404 Appendix C-Source Code Application Note An RZK Application , , and the Character LCD module. Keypad (4x4) eZ80F91 MCU Port B Port C LCD Display ( 16x2 , DB6 13 DB5 12 DB4 11 RS Character LCD Module ( 16x2 ) 4 RD 6 WR 3 , Module 4x4 Keypad 16x2 Character LCD Module fitted with a Hitachi HD44780 controller Test Procedure , two code files for the LCD display. These files are taken from the Character LCD Interface for the

Abstract: LCD display module 16x2 characters HD44780 16x2 lcd HD44780 hitachi 16x2 lcd datasheet hitachi 16x2 lcd lcd 16x2 instruction set HD44780 16x2 LCD ASCII CODE 16x2 16X2 LCD CHARACTER CODE LCD ASCII table CODE 16x2

Text: . . . . . 7 Flowchart-Initializing the HD44780 Controller on the 16x2 LCD Module . . . . . . . . , ) on the Character LCD Module stores the data to be displayed and is represented by 8-bit ASCII , application implements driver API code for a 16 x 2 LCD Module, with appropriate initialization of the LCD , print an ASCII character `Z" at 5th column of 1st row of LCD module: 1. Set print location as 5th , file in Appendix C on page 12 contains the code to display text on the LCD Module. · To replace

Abstract: 16 pin diagram of HD44780 lcd display 16x2 16x2 lcd method LCD display module 16x2 characters HD44780 16 pin diagram of lcd display 16x2 LCD ASCII CODE 16x2 16x2 lcd HD44780 HITACHI HD44780 DOT MATRIX LCD MODULE hitachi 16x2 lcd LCD display module 16x2 HD44780

Text: API code for a 16 x 2 LCD Module, with appropriate initialization of the LCD controller. The APIs , the LCD Module: · Print an ASCII Character · Print an ASCII Character String · Print a , LCD_printc_user(0x03) API). Note: The LCD_test.c file contains the code to display text on the LCD Module , initializing HD44780 Controller on the 16x2 LCD Module. LCD Power On Wait for 15 milliseconds Write , Figure 5. Initializing the HD44780 Controller on the 16x2 LCD Module AN014304-0608 Page 8 of 18

Abstract: Display LCD 20x4 LCD ASCII CODE 20x4 pin diagram of serial lcd display 16x2 LCD 16X2 5V RS232 Driver LCD ASCII table CODE 16x2 explanation of 16x2 LCD lcd display 2x16 software command 16X2 LCD CHARACTER CODE display lcd 16x2 232

Text: the "Connecting Your LCD " section above. Display Control Codes ASCII Keystrokes Function , currency symbols . . .). Most of the characters can be accessed by sending the appropriate ASCII code to , the LCD "s solder connector (J2). The supply"s ground should connect to the VSS terminal of the LCD , and LCD power (+5volt only) LED Backlight power (+5volt only) SPI or RS-232 data in (input) SPI , systems, you need only use the LCD "s solder connector (J2). This connector has standard 0.1 inch spacing

Abstract: Display LCD 20x4 pin diagram of serial lcd display 16x2 16x2 serial lcd 20X4 LCD display display 16x2 datasheet 20x4 characters Display Driver explanation of 20x4 LCD led scrolling display lcd display 2x16 software command

Text: the "Connecting Your LCD " section above. Display Control Codes ASCII Keystrokes Function , currency symbols . . .). Most of the characters can be accessed by sending the appropriate ASCII code to , the LCD "s solder connector (J2). The supply"s ground should connect to the VSS terminal of the LCD , and LCD power (+5volt only) LED Backlight power (+5volt only) SPI or RS-232 data in (input) SPI , systems, you need only use the LCD "s solder connector (J2). This connector has standard 0.1 inch spacing

Text: 16x2 32 25 50 20 x 2 LCD footprint Brightness comparison (Cd/m2) CU20027-YX1A, Series Available interfaces CU22042-Y1A 22x4 characters in 16x2 LCD footprint. 8 bit parallel , Y SERIES RoHS compliant http://www.noritake-elec.com/y-series.htm 16 x 2 LCD footprint , number comparison CU24043-Y1A 96 20x2 20 x 4 LCD footprint CU24063-Y1A / Y100 40 25 50 , interface Data CU20027-YX1A 20x2 LCD footprint and brightest Vacuum Fluorescent Display (VFD) module

Text: Overview The PmodCLP is a 16x2 character LCD module that uses two Pmod connectors to present a 3.3V, 8-bit parallel data interface to system boards. It is based on a Sunlike LCD panel that uses a Samsung KS0066(or equivalent) LCD controller. The module can be attached to any number of Digilent system boards , incremented after each read or write operation. The LCD display uses ASCII character codes. Codes up through , PmodCLP™ Parallel LCD Display Module Reference Manual Revision: April 28, 2008 ® ww w. d

Abstract: keypad 4x4 lcd module 16x2 pin architecture of lcd display 16x2 hitachi 16x2 lcd datasheet 16 pin diagram of HD44780 lcd display 16x2 16 pin diagram of lcd display 16x2 datasheet keypad 4x4 LCD ASCII CODE 16x2 24 pin diagram of lcd display 16x2

Text: of the eZ80F91 MCU Keypad (4x4) eZ80F91 MCU Port B Port C LCD Display ( 16x2 ) Figure 1 , DB4 11 RS Character LCD Module ( 16x2 ) 4 RD 6 WR 3 5 FNC 1 GND , LCD display interface is provided to set and view the local time and local date of a country, set , in the 24-hour format. Note: The source code associated with this application note, AN0188SC01.zip , with the eZ80F91 Module, the keypad, and the Character LCD module. The following section discusses

Abstract: Display LCD 20x4 explanation of 16x2 LCD 20X4 LCD 20X4 pin architecture of lcd display 16x2 explanation of 20x4 LCD lcd 20x4 16X4 LCD CHARACTER CODE LCD ASCII CODE 16x2

Text: Crystalfontz Technology * PRELIMINARY * 20x4 and 16x2 intelligent serial interface display command set This document corresponds with beta code v0.7. Please contact Brent Crosby at (509) 291-3514 , Baud 9600 4800 2400 1200 Display Control Codes ASCII Keystrokes Function \000 \001 , Directly to the LCD Controller Show Information Screen Explanation of Control Functions Cursor Home , " followed by one byte for the column (0-19 for a 20x4 display, or 0-15 for a 16x2 display), and a second

Abstract: 16X2 LCD CHARACTER CODE hitachi 16x2 lcd HITACHI HD44780 DOT MATRIX LCD MODULE lcd 2 x 16 HD44780 init asm 16x2 lcd HD44780 hd44780 lcd controller lcd 2 x 16 HD44780 hd44780 lcd controller pin out hitachi 16x2 lcd datasheet

Text: implements driver API code for a 16 x 2 LCD Module with appropriate initialization of the LCD controller , MCUs 7 To print the ASCII character Z to the fifth column of the first row of the LCD Module: 1 , LCD Module using the demo file LCD_test.c (see Appendix C on page 12 for sample code ). Equipment , MCUs 12 Appendix C-Source Code This appendix contains a listing of the source code for the LCD , compatible) in 4-bit mode AN015901-0903 Source Code Application Note Character LCD Interface for

Abstract: lcd 16x2 instruction set 24 pin diagram of lcd display 16x2 16X2 LCD TIMING CHARACTERISTICS 16x4 LCD ddram STN negative Blue 16X2 lcd display TC162F 16 pin diagram of lcd display 16x1 16X4 LCD CHARACTER CODE Okaya Electric Industries

Text: /O) LCD TYPE/COLOR Type Background Character Code TN Grey Black T Black Back Lite Color E* STN , MPU -» LCD Module ■1": Read MPU «- LCD Module E I Operation start signal for data read or write , "s NORMAL TEMP (+5VDC) WIDE TEMP (±SVDC) LCD v Module O vDD-VO VR 10KQ - 20KQ VDD LCD v Module SS vO , VOH-VOL ( VIL Command Instructions Instruction Code Description Executed Time (max.) fosc , €ž. Reads data from DDRAM or CGRAM 40nS Code Description Executed Time (max.) I/D=1: Increment l/D

Abstract: Display LCD 20x4 display module lcd 4x20 radio shack baud WR232Y02 20X4 standard values of Lcd 16x2 to microcontroller pin architecture of lcd display 16x2 16x2 display display lcd 16x2 232

Text: SPI_CLK SPI_BUSY Crystalfontz Display Function Ground (backlight and controller) Controller and LCD , supply to Vdd. Power A and Power B will only power the LCD itself, not the backlight. DAo not connect a supply greater than 5.25 volts to Vdd or LED+. Damage to your LCD module will result. To use the , 16x2 intelligent serial interface display command set This document corresponds with firmware v1 , closing jumpers. See Appendix A: Interface Options. Display Control Codes ASCII Keystrokes

Abstract: TC202A HEADER RT TC162C 16x1 LC display 16X2 LCD TIMING CHARACTERISTICS 16X2 LCD CHARACTER CODE 24 pin diagram of lcd display 16x2 lcd display 16x2 instruction set Okaya lcd

Text: Above B T U A LCD TYPE/COLOR Type Background Character Code Grey TN Black Yellow STN Blue Gray k , code E Handling Instructions Safety · If the LCD panel breaks, do not allow the liquid crystal to , Name I/O Power Supply Requirements Function V DD-VO LCD v V s s V o c V o RS R/W E DBO thru , MPU LCD Module "1": Read MPU LCD Module Operation start signal for data read or write Data Bus of , Command Instructions Code Instruction Clear Display Cursor At Home Entry Mode Set Display On/Off Control

Abstract: EPSON ea-d16015ar EPSON EA-D16025AR ea-D16025AR ea-d16015ar EA-D20025 EA-D20025AR-S EA-D20025AR epson EA-D16025AR-S LCD display module 20x2 characters

Text: EPSON I Features Alphanumeric Dot Matrix LCD Module Built in a display data RAM , Model Number of Characters Module Size WxHxD (mm) Viewing Area W xH (mm) Character Size W xH (mm) LCD B , EA-D40025AR-S EA-D40025RR-Y 24x2 40x2 20x2 16x2 16x2 20x2 80x36x10 S 64 5x13 8 3.07x6.56 TN 1 /1 , tp u t leakage c u rren t Power supply cu rren t LCD driving voltage Symbol VDD VIH VII VOH VOL I LI , Function Power supply (GND) Power supply (5V) LCD contrast adiustment Register selection Read/W rite

Text: Type (KBytes) (Bytes) I/OPins Interrupt (Int/Ext) Timer/Counter SIO LCD (Seg/Com , Interrupt (Int/Ext) Timer/Counter Serial LCD Interface (Seg/Com) S3F9xxx (KS86) Series , LCD Interface (Seg/Com) ADC (BitxCh) PWM(1) (BitxCh) Max.Osc. Freq. Min Exe. Time (ns , 8x1, 16x2 12MHz 333 2.0~5.5 -25~85 Internal 8MHz RC Oscillator S3F8xxx (KS88) Series , ROM RAM Type (KBytes) (Bytes) I/OPins Serial LCD Interface (Seg/Com) Interrupt (Int/Ext

Text: Mbytes) 16X2 LCD Module PushButton Switches (3) Flash (4 Mbytes) SD Card Socket Slide , ) 16X2 LCD Interface RS-232 Transceiver EPCS4 Config Device USB Blaster Figure 2-2 Block , Green color LEDs (Active high)  4 seven-segment displays (Active low)  16x2 LCD Interface (Not , keyboard in real time. The received scan-codes are translated to ASCII code and displayed in the control , .28 Using the LCD Module

Text: sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602A-L( 16x2 ) Character LCD Display , ( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character, 2 Line , sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602B-L( 16x2 ) Character LCD Display , PC1602C-L( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character, 2 , ( 16x2 ) Character LCD Display 80.0± 0.5 2.5 8.0 2.54x15=38.1 1.8 16-Ø1.0 2.0 4-Ø2.5 8.8

Text: Optrex Numbering System DOT MATRIX Type LCD Modules DMC ­ 50000 N Y H U ­ S E B 1 Standard Pin Connections Pin No. Symbol Pin No. OPTREX CORPORATION HIGH CONTRAST LCD MODULE FEATURES , 7 1 Symbol 14 DB7 1. Type of Display: 2. Development Number: 3. LCD TYPE: 4 , . W x H (mm) (°C) - - - - - - - - - - - - 16x1 16x1 16x1 16x2 16x2 16x2 16x2 16x2 16x2 16x2 16x2 16x2 PRD250LPW1-ND N/A N/A PRD250LPW-ND PRD250LPW-ND

Abstract: 16X2 LCD DISPLAY IEC1107 IEC-1107 transformer protection based microcontroller Digital Frequency Meter with LCD Display display 16x2 SALEM 16X2 LCD trivector meter

Text: accuracy of the time maintained by the meter. A 16x2 LCD display along with two external buttons enables , computed parameters along with the parameter index are displayed by the micro-controller on a 16x2 LCD , 12bit ADC with delay equalization on sampled data in software · Measurements displayed on a 16x2 LCD display and stored in Flash memory · True RMS measurement of all phase voltages and line , performs data management and peripheral control. · Harmonic Analysis optional LCD DISPLAY LCD

Abstract: 16X2 LCD rohs 24 pin diagram of lcd display 16x2 pin diagram of serial lcd display 16x2 lm1117 3.3V pin architecture of lcd display 16x2 display 16x2 i2c 16x2 display 14 pin diagram of lcd display 16x2 usb/doc lcd 16x2 14 pin

Text: INTRODUCTION ADuC-MT7020 is small terminal board with USB link for PC, two buttons, LCD 16x2 with backlight , (bootloader enable) button ­ Two buttons ­ LCD 16x2 display with BACKLIGHT ­ 32 768 Hz , DEMO SOFTWARE · · · · · · · · · RS232 initialization for EW-ARM LCD , DAC demo code for EW-ARM LCD write for EW-ARM ADC read DAC write demo code for EW-ARM Blink LED demo code for EW-ARM , architecture JTAG Port supports code download and debug Clocking options: ­ Trimmed On-Chip Oscillator

Abstract: 16 pin diagram of lcd display 16x2 16 pin diagram of lcd display 16x2 hd44780 LCD 16X2 5V RS232 Driver 16 pin diagram of HD44780 lcd display 16x2 16x2 lcd HD44780 BV4108 16x2 LCD display command lcd display 16x2 HD44780 16x2

Text: from Figure 3 the board mounts directly on to this 16x2 LCD display. LCD Command Set LCD , as an ASCII code so the actual bytes sent to the LED device is: 97 (a) 106 (j) 52 (4) Note that , which is the ASCII code for `>" Note that this command requires an unlock (aU) before it can be issued , `a" and the address and commands will be shown as their ASCII code because these can be entered , the start address of the EEROM is specified as 0x31,0x30 which is the ASCII code for 10. Name

Text: PAGE ASIC / FOUNDRY 3 ASIC ORDERING INFORMATION 4 CMOS IMAGE SENSORS 5 LCD DRIVER ICs 5-6 LCD DRIVER IC ORDERING INFORMATION 7 MOBILE APPLICATION PROCESSORS 8 HDTV , ) 11. " - " 4 SAMSUNG SEMICONDUCTOR, INC. BR-07-ALL-002 AUGUST 2007 Image Sensors / LCD , -07-ALL-002 SAMSUNG SEMICONDUCTOR, INC. 5 SYSTEM LSI LCD Driver ICs BW STN GRAPHIC DISPLAY DRIVER IC FOR , in case of TCP BR-07-ALL-002 AUGUST 2007 LCD Driver IC Ordering Information SYSTEM LSI

Abstract: Assembler programming for LCD 16X2 LCD DISPLAY Datasheet Lcd 16x2 display 16x2 display 16x2 datasheet 16x2 serial lcd 16x2 lcd LCD display module 16x2 lcd display 16x2

Text: Microcontroller In-circuit programming of eCOG1 10/100 Ethernet 8Mb SDRAM 16x2 character LCD Display Speaker , 16bit SDRAM · 16x2 character LCD module · Fast parallel debugger interface · User serial ports · 4 , · Fully featured and unlimited C compiler with example applications code provided · All currently , interfaces are brought out from the chip and some are used for driving peripheral devices including a LCD , access operations Watchpoint and Breakpoint support. Code coverage support. Command line interface

Displaying ASCII characters on MXN lcd is very easy. Where M represents number of coulombs and N number of rows. You just need to know about the internal structure of character lcds, registers of character lcds and the characters supported by lcd controller. Below tutorial will help you in knowing about the internal structure of lcd.

Normally lcd contains HD44780 controller in them. Hd44780 is responsible for all the communications with external controller and displaying text on lcd screen. HD44780 is designed by Hitachi and it supports 255 characters. Which means you can display 255 different characters on lcd directly through its controller. The supported characters are ASCII, Digits(0,9) and Japanese characters. Refer to data sheet of controller if you want to know about all characters and their address in ROM of hd44780 lcd controller.

Now to display ASCII character on 16×2 lcd simply pass the address of the ASCII characters present in 16×2 lcd controller ROM(read only memory). I did same in my code. Started from the first character and prints all of them one by one on lcd. Some characters are missing in ROM of hd44780 and special Japanese language characters are present on their locations. So some Japanese language characters will also be displaced on lcd. Few characters in ROM are greater than 5×10 font. These characters will not appear on lcd. Their decimal value will be displayed on lcd but they will not appear on the lcd.

NOTE: You will see some spaces and weird shape characters displayed on lcd. Those characters are present in controller of 16×2 lcd that’s why they are displayed on lcd. Some Japanese characters will also be displayed on lcd. All the characters present in lcd controller will be displayed on lcd. Characters present in HD44780 lcd controller are given below. Pic is taken from data sheet of hd44780 lcd controller.

Coming to the project code. On first row of 16×2 lcd decimal values of ASCII characters will be displayed and on second row ASCII characters will be displayed. ASCII characters start from 34 location of the hd44780 ROM location. So in code i started the ASCII characters from 34th location.

Each character will appear on 16×2 lcd for 1 second after 1 second it disappears and the next ASCII character will appear on 16×2 lcd with its corresponding decimal value.

Some more projects on displaying ASCII characters on 16×2 lcd using various microcontrollers. Each project code is open source. You an use and modify it according to your needs.

The Display Data RAM holds the letters that get shown on the LCD of a character LCD module. For instance the letter ‘A’ is stored in its ASCII equivalent 65DEC (0x41HEX) in the DDRAM.

So a 20×2 character LCD would have enough DDRAM to store 40 letters. The value in the DDRAM is used to find the correct bitmap in the CGROM (Character Generator ROM) or CGRAM (Character Generator RAM), it is this small bitmap that gets displayed on the LCD.

This is20×4 Character LCD Displaywith Blue Backlight ASCII Alphanumeric Character. 20×4 character LCD Display can be Interface with almost All Digital Microcontroller such as Arduino, 8051, PIC, AVR, ARM, MSP, COP8, STM, Raspberry Pi etc. 4x20 Display also used in Industrial Research and Development R&D, Student Hobby DIY Project. About20×4 Character LCD Display: 20×4 LCD is a basic 20 character by 4 line display Blue White Back light.

Utilizes the extremely common AIP31066 interface chipset. You will need 7 general I/O pins (If use in 4-bit Mode) to interface to this LCD screen. Includes LED Backlight. Features of 20×4 LCD Display : Commonly Used in: Student Project, Collage, copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices.SIZE: 20×4 (4 Rows and 20 Characters per Row), Can display 4-lines X 20-characters. Operate with 5V DC, Wide viewing angle and high contrast. Built-in industry standard HD44780 equivalent LCD controller. LCM type: Character, Package Contents: 1 X LCD 20×4.

20×4 LCD is a basic 20 character by 4 line display BlueBacklight. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 7 general I/O pins (If used in 4-bit Mode) to interface to this LCD screen. Includes LED backlight.

Features of 20×4 Display LCD:Commonly Used in: Student Project, Collage, copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices

Much of it is RTTY, ASCII, CW, and AMTOR (FEC) signals passing commercial, military, diplomatic, weather, aeronautical, maritime, amateur and other traffic.

Plug this self-contained MFJ MultiReader into your shortwave receivers earphone jack. Then watch these mysterious signals turn into exciting text messages as they scroll across an easy to read LCD display. No computer, interface, special cables or other equipment is needed.

The 2 line 16 character LCD display has contrast adjustment. One line comes in at speed of signal, second line is delayed so you catch every exciting word!