what to clean a lcd screen with brands

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Remember when your computer LCD display had that brand-new, fresh out-of-the-box shine? If it"s looking a little dull lately, it might be time to give it a good cleaning. Here"s how:

Step 2:Gently wipe the dust from the surface of the display using a dry, lint-free cloth, like a microfiber cloth. Remove any tags that may be on the cloth to avoid scratching the display with the tags.

If you prefer, you can use a cleanser made specifically for cleaning LCD displays, but do not spray it directly onto the display. Spray a small amount of the cleaner onto a microfiber cloth first, to avoid getting any cleaning solution inside the display.

Even if you don"t have snot-nosed kids or wet-nosed pets, your computer monitor or HDTV panel will eventually accumulate a collection of annoying smudges and stains. My household happens to contain both of the aforementioned creatures and, thus, I"ve developed a method for wiping down the HDTV in the living room and the LCD monitor in my office, as well as the screen of my laptop and iPad.

If you take a quick survey of LCD or HDTV manufacturers about the recommended method for cleaning the surface of your monitor or TV screen, you"ll discover more don"ts than dos, often in conflict with one another.

In the don"t column:Don"t use aerosol sprays, solvents, or abrasives. (This means don"t reach for the Windex under the kitchen sink, as tempting as it may be.)

First, attempt to clean your screen with a dry, lint-free cloth. If you can"t find the cleaning cloth that came with your screen in question, then it"s likely you have one laying around from a laptop, iPad, or iPhone purchase.

After removing any dust from your screen with a dry cloth, dip the other cloth in your dish soap solution, wring it out, and gently wipe your display. Next, rinse out your soapy cloth, wring it out again, and wipe your display to remove any soap residue. Finally, take your dry cloth and wipe the display to remove any streaking.

Editors" note:It"s time for spring cleaning! Week"s two"s theme: physical cleaning.Check backevery day this week to see how best to keep dirt, grime, crumbs, and other annoying bits off your devices. And be sure to return next week for more spring cleaning tips and tricks.

Screens can scratch easily, and even paper towels and tissues contain fibers that can do damage. “Your best bet is to use a soft, anti-static microfiber cloth—the kind used to clean eyeglasses and camera lenses—and wipe in a circular motion,” says John Walsh, who cleans more than 250 TVs a year in his role as a CR photographer. (Some TV manufacturers will include a cloth for this purpose.) “Gently wipe the screen with a dry cloth to remove dust and other debris, but don’t press too hard,” he says.

You may also want to wipe down the TV’s cabinet, and make sure dust isn’t clogging the vents that help dissipate heat. If the TV is on a stand and not tethered to the wall, Walsh suggests cleaning with one hand while supporting the TV with the other to prevent the set from tipping over. However, CR strongly recommends anchoring all stand-mounted TVs using anti-tipping straps designed for this purpose.

If there are hard-to-remove stains, you can dampen the cloth slightly with distilled water and gently clean the screen. Don’t spray water directly onto the screen; that could cause a shock or component failure if water seeps into the inner workings of the set.

For the most stubborn stains, you can try using a solution of very mild dish soap highly diluted with water, once again applied to the cloth and not to the TV itself. (As a guideline, Panasonic used to recommend a 100:1 ratio of water to soap.) LCD screens, in particular, are very sensitive to pressure and can scratch easily, so don’t press hard.

The more you use an electronic device, the dirtier it"ll get over time. Given that smartphones, laptops, tablets, and TVs are a major part of our lives, you"re probably curious about how to clean their screens. When it comes time to give your device a good wipe-down, you may be confused about where to start, especially given the sensitive nature of this cleaning task. Even though most smartphones are waterproof, you definitely shouldn"t scrub one like you would a dirty dish in the sink.

Below, you"ll find our favorite screen cleaners, as well as some tips on how to clean your smartphone. And hopefully, we will also help ease your concerns about catching or spreading COVID-19 via your smartphone.

Apple says you should use a soft, slightly damp, lint-free cloth to clean your iPhone. On the other hand, Google says you can use ordinary household soap on a damp cloth to remove stains. Both agree that cleaning wipes — those that have 70% isopropyl alcohol — are fine, too. That is, just as long as you don"t get moisture into any of your smartphone"s openings. Apple also says 75% ethyl alcohol wipes and Clorox Disinfecting Wipes are safe to use: Just make sure you don"t use products containing bleach or hydrogen peroxide!

It"s also important to turn off your device before you clean its screen, and you should never apply the cleaner directly to the screen, either. Spray the cleaner on a lint-free cloth instead, and avoid using rougher materials like paper towels. Consider keeping your smartphone in a sealed case, too, so it"s easier and safer to wipe down with disinfectant wipes.

The CDC recommends cleaning high-touch surfaces regularly — including our phones. Both the Wall Street Journal have reported that there is no need to compulsively clean your phone, but it"s still a good idea to give it a quick wipe down every now and then.

Dr. Donald W. Schaffner, an extension specialist in food science and a distinguished professor at Rutgers University says if you"ve been near anybody who has been coughing or sneezing, you should most definitely clean your phone. However, if you"re diligent about washing your hands, there"s no reason to clean your phone more than once a day ... unless it"s potentially been exposed to the virus.

Unless you"re using a disinfecting wipe to clean your devices, chances are that whichever screen cleaner you buy will not kill the COVID-19 virus. Most screen cleaners aren"t disinfectants. If you"re shopping for a disinfectant, make sure you check to see if it"s an EPA-registered disinfectant that can kill the COVID-19 virus.

Even though most screen cleaners don"t kill viruses, experts say that the chance of catching a virus like COVID-19 from your smartphone is minimal when compared to the risk of being near someone who is infected with the disease.

There are steps you can take to minimize your mobile device"s exposure to germs and viruses, however. The Federal Communications Commission recommends the following:Keep your phone in your pocket, purse, or car when you leave the house

Now that you know how to clean your devices, find the best screen cleaner for your needs among these thoroughly evaluated picks. We"ve recommended cleaners that come in large-sized bottles that"ll last for months at home, some smaller travel-friendly cleaners for keeping your screens looking flawless on the go, and even some hypoallergenic screen cleaners for folks who are sensitive to chemicals. Trust us, whether you"re sick of the smudges or just want to keep germs and bacteria at bay, you"ll find the best screen cleaners for every kind of device below.

No matter where LCD screens are kept, they will always need cleaning from time to time. Cleaning an LCD may seem like a daunting task, but there are a few simple ways to clean it without damaging to scratching to surface.

There are many cleaning solutions available in shops. However these may seem a bit expensive and are sometimes quite unnecessary. PixelClean is one of the better and less expensive brands. It is highly recommended. Most products will come with instructions on how to use them.

It is recommended to use a simple alcohol solution to clean an LCD screen. This solution is made up of part distilled water and part 50% isopropyl alcohol. Be warned that isopropyl alcohol is flammable.

50% isopropyl alcohol is very common. If you find 70%, 91%, or 99% isopropyl alcohol, adjust the formula to use less alcohol and more distilled water.

The reason you want this mixture is because alcohol evaporates so quickly. More importantly, it doesn’t leave any residue behind, so the screen will be cleaned without there being any streaks or marks left. You can buy this at your local pharmacy–it’s used for cleaning wounds.

Do NOT use tissues/Kleenex to wipe your screen. That is ineffective, because they will leave little tissue particles all over your screen. You want a 100%-cotton cloth that is soft and absorbent. A t-shirt is a good cloth, but so is a sock or a Turkish towel, so long as it is 100% cotton.

Stay away from cloth that has polyester in it because this can contain stiff filaments. These filaments can scratch the screen while you are rubbing over it. Also stay away from paper towel and tissues. While it might feel soft, remember that it is paper and therefore, it comes from wood. This means that there might be microscopic wood fragments in the paper towel that will scratch your screen if you move it over it. Therefore, avoid anything paper and instead, focus on the cotton.

First dampen the cloth with the alcohol solution. You should never spray any sort of liquid directly onto the screen. You also don’t want to try and clean the screen without some sort of liquid because the dust particle, as it is moved across the screen, will scratch.

Wipe the screen gently from top to bottom or in a counter clockwise direction, and wait for it to dry. You’ll remove all of the dust and the liquid that is on the screen will evaporate quickly. Then, the screen will be clean and scratch free.

Be careful not to let the cleaning solution leak into the sides of the monitor. Also, be certain that you do not press hard on the LCD screen. You can permanently damage an LCD screen by pressing on it too hard.

If there is just dust on your screen, there is no need to fully clean it. To remove dust all that must be done is to wipe it away with a microfiber cloth. Simply wipe your screen from end to end gently with the cloth.

When was the last time you cleaned your TV? As one of the most prominent pieces of equipment in your home, your TV is probably exposed to more than you think. And we’re talking dust, cobwebs, pet hair and dirt, not to mention germs and bacteria in the air. Think of how often you’re touching your TV and the remote too. If your TV is near the kitchen, lingering odors and oils in the air could also be hitting your screen’s surface.

Figuring out what to use to clean your TV isn’t that complicated, but there are definitely one or two things you should avoid. Do turn your TV off before you get started. Don’t reach for the typical glass cleaner. Here are some other specifics.

Cloth: A soft microfiber cloth or flannel is the best material to use when cleaning a delicate flat screen. Paper towels or rags are a little rougher and could cause scratches you’d rather avoid. Plus, they’re generally thin and cheaper, leading to bits of paper breaking off and getting stuck on your screen.

Cleaning Solution: Moistening your cloth with a bit of water is generally more than enough to clean off everyday dust and debris. But if it’s not, you can always use a special screen cleaning solution, which is designed to get out gunk while being gentle on your TV surface. Harsh cleaning solutions like glass cleaner or other cleaners you would use for the rest of your house could react badly with the screen and cause permanent discoloration.

Specialty Products: There are also specially formulated products like wipes or cleaning sprays that are designed to be used on TV and computer screens without causing damage to the surface or the color. Sprays often come with a microfiber cloth included, and all of these products are made with mild, non-toxic ingredients.

Simple microfiber cloths like these Amazon-branded ones are perfect for cleaning off delicate screens either dry or moistened slightly with a cleaning solution. The cloths are gentle on surfaces and can be tossed in the washing machine and re-used.

We like these microfiber cloths for cleaning your TV but they’re also useful to have in the house for cleaning a wide variety of surfaces (say, lighting and furniture) or as paper towel replacements when you want to wipe down a counter or desk.

It’s hard to beat wipes when it comes to ease of use. We like these Windex wipes because they come in large quantities from a trusted brand, made with gentle ingredients that are safe to use on all screens, from your TV to your laptop.

This spray comes with a plush microfiber cloth included, which is helpful, and makes screens look shiny and new in a matter of seconds. And according to the product notes, each use keeps your screen cleaner for longer, requiring less product each time.

We always like to include an environmentally conscious option, like this EcoMoist screen cleaner, which is non-toxic, alcohol free, and hypoallergenic according to the manufacturer notes. It also comes with a microfiber cloth included.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Keeping your precious rugged LCD monitors or LED screens clean and tidy can be challenging. This is especially true if you happen to have handsy young children who like to touch everything or pets running amuck in your household or even if you happen to work in a particularly messy environment such as a construction site or restaurant. Sometimes, rogue bits of debris can attach themselves to your electronic devices and while this is entirely out of your control for the most part, there are a few effective and harmless cleaning solutions you can put into practice to keep your electronics clean and running smoothly. Continue reading to learn about helpful tips for cleaning your LCD and LED screens without causing internal or external damage.

Before you can get down to the cleaning part, you need to prepare your LCD or LED screen in order to reduce the risk of liquids penetrating the surface and causing internal damage. Keep in mind that modern screens might technically include higher end features than the old school CRT screens from your childhood, but that doesn’t necessarily mean they’re more durable. In fact, modern LCD and LED screens are actually a lot more fragile and easily susceptible to damage if they’re not cared for properly. To prepare the screen for cleaning, make sure you shut down the system entirely, disconnect it from its power source, and then let it cool down for a few minutes. This will reduce the risk of electrocution and it’ll make it easier to clean the screen without resulting in annoying and unattractive streaks.

Occasionally, you’ll have to contend with a tough spot, streak, or fingerprint marking that takes a little extra effort to clean. If this happens, don’t panic and definitely don’t press down harder with a cloth or try to scrape it off with your fingernails or any other tool as this can cause severe damage to the top layer or anti-gloss coating. The best thing to do is use a non-abrasive cleaning solution such as isopropyl alcohol that’s diluted with either pure or distilled water. Spray the solution onto a microfiber cloth and gently wipe down the area in either an up and down or side to side motion. Applying too much pressure to even the most rugged touchscreen can compromise its limited durability.

There are a few types of cleaning cloths you can use to wipe down your rugged LCD monitor either at home or at work. The most recommended one is microfiber cloth for a multitude of reasons. First, microfiber is a state-of-the-art technological development that’s a thin and soft, yet strong enough material to thoroughly clean your electronic devices without risking damaging them in any way. Most of the time, computer and flatscreen TV manufacturers provide microfiber cloths with their products along with a specific set of maintenance and cleaning instructions. Microfiber cloths are immune to collecting or spreading lint across your screen, and because of the intricate way in which the minuscule fibers are intertwined these cloths are able to trap larger quantities of dirt and dust without leaving streaks. You can also use a cotton tea towel, a cotton t-shirt, or cotton handkerchief if you’re in a bind and don’t have microfiber cloths on hand.

This point can’t be emphasized enough. Even though it may seem like common sense that electronic devices shouldn’t come into direct contact with any liquids (especially if they’re still plugged in), not everyone seems to think so and many people have made the mistake of spraying cleaning agents onto their devices. The safer and smarter way to clean any rackmount LCD display is by first wiping it down with a dry cloth and then spraying a small amount of the cleaning solution onto a different cloth and wiping it down gently. After you do this, wipe it down with a clean dry cloth to remove any remaining liquid.

Always avoid using ammonia or rubbing alcohol based cleaners on your touchscreen devices. The devices themselves might be constructed with the capability to withstand most types of damages, but certain features they possess aren’t. Ammonia and rubbing alcohol can irreparably strip away or damage the extremely delicate anti-glare coating on the screen, which will not only negatively alter your viewing experience but also make your device a lot harder to use in strong sunlight.

Dust that settles between the gaps in the screen where the bezel and the top layer of glass or plastic meet can penetrate deeper and cause internal damage to your device. Regularly using a vacuum with a soft-bristled brush (to prevent scratching) can help you keep your device clean and free of any issues.

For extra measure, you can also spray the surface of your screen, computer keyboard, or even the vent on the back of the device with a can of compressed air to blast away any lingering and stubborn debris or dust. If any of it lands on the surface of the device, make sure to gently wipe it away with a clean cloth to prevent it from making its way back into your device. Implementing this cleaning method on a regular basis will ultimately help to guarantee the longevity and functionality of your device.

Nauticomp Inc. is the proud designer, manufacturer and distributor of countless rugged LCD and LED monitors and displays. We’ve been working in the technological industry for more than 20 years and supply a variety of businesses including marine bases, military bases, restaurants, casinos, retail stores, shopping centers, and healthcare facilities with durable and high-quality LED and LCD displays that serve a wide range of purposes. For more information about our company or our products, please feel free to contact us.

Regularly cleaning your LCD monitor keeps it free of dust, smudges, and germs. Wiping with a dry microfiber cloth is the safest cleaning option and is surprisingly effective at removing germs. You may need to use a dampened microfiber cloth to get rid of stubborn smudges and stuck-on debris, though. If you"re worried about germs, consider using a vinegar and water solution or a Lysol wipe on the screen. Be sure to check the device’s user manual first to make sure it’s okay to use liquids!

Remember when your LCD or OLED display had that brand-new, fresh-out-of-the-box shine, feel and look? You are in the right place if your display is now due for deep cleaning.

Things to consider before cleaning or handling an electronic displayAvoid static by grounding your body and following proper ESD-safe handling techniques.

A microfiber cloth and distilled water is recommended for cleaning the display glass. Use Qtips and Isopropyl alcohol for cleaning the printed circuit board.

Although distilled water is recommended for wiping the display glass, you can use a cleanser developed explicitly for cleaning displays. However, do not spray it directly onto the display. Spray a tiny amount of the cleaner onto a microfiber cloth first to avoid getting any cleaning solution inside the display.Never spray any liquids directly onto the display.A spray is too hard to control and confine. The fluids can seep into the other display layers or surrounding components and cause irreversible liquid damage.

Only use a microfiber cloth and don"t use chemicals to clean a resistive touchscreen.Disconnect the display from the power supply and remove any screen protectors or liners.

Isopropyl alcohol (IPA) is widely used to clean printed circuit boards (PCBs). Use a Q-tip or soft small bristle brush for scrubbing a PCB, and never use a paintbrush.Gently rub a Q-tip in Isopropyl alcohol.

Cleaning soldering residue on LCD with Isopropyl alcohol and a Q-Tip.Cleaning residue around soldering elements is not necessary if Newhaven Display performed the soldering.

Cleaning your electronic display is a simple task. However, it is essential to consider these steps to handle and clean it properly. You should now have a better understanding of what cleaning products are safe to use, how to clean the display screen glass, how to clean touchscreens and how to clean soldering residue.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

If any marks remain, moisten the cloth with LCD cleaner, and then gently stroke the cloth across the display in one direction, moving from the top of the display to the bottom.

Notice: Do not use any of the following chemicals or any solutions that contain them: acetone, ethyl alcohol, toluene, ethyl acid, ammonia, or methyl chloride. If you have a different chemical or solution and are not sure whether it is suitable, do not use it. Using any of the chemicals in the previous list may cause permanent damage to the LCD screen. Some commercial window cleaners contain ammonia and are, therefore, unacceptable.

Note: Many cleaning solutions are sold specifically as LCD cleaners. You can use these to clean LCD screens on Dell laptops. Alternately, you may use a 50/50 isopropyl alcohol and water mixture. Microfiber cloths such as those used to clean eyeglasses are excellent for use with LCDs.

Please visit the support page for your manufacturer to find out how to clean your LCD. The support pages for some manufacturers are listed on the Checking Warranty page.

To catch every second of your favorite show and keep your TV in excellent condition, you"ll need to clean your television screen regularly so it remains dust-, dirt- and fingerprint-free. But using the wrong cleaning method like spraying your TV directly with harsh chemicals can cause permanent damage and negate any warranty that may still be in effect.

That’s why the Good Housekeeping Institute’s Cleaning and Media and Tech Labs have joined forces to recommend the safest, most effective methods and household products to clean your television screenand reveal a picture that’s brilliant to watch and totally streak-free.

No matter what type of television you have, our recommended cleaning method remains the same. All you"ll need to clean your TV screen is a dry microfiber cloth that’s designed to gently clean and remove smudges from eyeglasses, cell phones and camera lenses. Though there are thousands of microfiber cloths to choose from, our experts like Elite Tech Gear"s oversized option. It"s twelve inches square, so it’s easier to use on a large TV screen than a smaller cloth and helps you can zap away fingerprints quickly. And since it"s designed for delicate surfaces and electronics you can use it to clean your laptop and iPad once you"re done with your TV.

Here"s the best way to clean a flat-screen TV without ruining it or ending up pesky little streaks, along with some useful tips on how to scrub down all the accessories that go along with it:

This approach does not bode well for cleaning the LCD screens of you digital signage system, though. And yes, the screens will need cleaned. One of the first responses users have when they see a new signage screen installed is to check if it is a touch screen. Whether it is or not, the finger prints are just the same. There also is a significant portion of the population that can not point to something on a screen without touching the screen with their finger.

A great way to see how much of a cleaning your screen requires is to turn it off. The light reflecting off the surface will highlight all of the smudges, fingerprints, and smears, usually in alarming quantities.

This is exactly what NOT to do. Ammonia based cleaners can damage any special coating that is on the screen. Depending on the brand, paper towels are fairly abrasive, to go along with the amount of lint debris they tend to leave behind.

Another tendency is to put some elbow grease into those tough to remove smudges. If they don’t rub off at first, you may be inclined to scrub harder. Doing so can damage the pixels in the screen.

LCD screens are designed to be cleaned with a delicate touch. Most light marks can be removed by gently wiping the screen with a dry microfiber cloth. For more stubborn smudges, you may need to dampen the cloth.  There are several cleaning solutions you can purchase, or for the Do-It-Yourselfer, use a 50/50 mixture of distilled water and vinegar. Do not spray the solution directly on the surface of the display. It could run down inside the display and cause damage to the electrical components. A good rule of thumb is liquid and electricity do not mix. It is best to spray the solution lightly onto the microfiber cloth and then wipe the screen. Repeat if necessary.

Don"t spray the screen because the mist can get in the sides and bottom/top of screen area and short out your monitor. Play it safe and spray the cloth. These things are expensive.

It is good to know that flannel is the best material to use to clean an LCD screen. I learned the hard way how important it is to use the right products to clean these screens. I was spraying on a general cleaner, with a paper towel and now my screen has a dull finish to it.

I am going to try the vinegar and water solution to see if this will help. I don"t have high hopes that my screen will look like new again, but now I know what not to do the next time I buy something that has an LCD screen.

I use a multipurpose biodegradable cleaner to clean my LCD screens. This is a diluted solution that I use to clean the glass in my home. I have never had any problem using this on my screens. I also use this on my iPad to get rid of all the fingerprints. I have found if I use this all the time it also seems to keep the fingerprints from building up as often.

I keep a small bottle of this mixed up all the time and always spray on the cloth before wiping the screen. I don"t mind the smell of vinegar so this doesn"t bother me. Because it is diluted in water it isn"t that strong anyway and quickly disappears.

You can use this cleaning solution for a lot of other uses in your home. It is safe for you and the environment and works just as good or better than cleaning products that have chemicals in them.

I have always wondered what was the best way to clean an LCD screen. After spending that much money on something I didn"t want to ruin it by using something I wasn"t supposed to. I have just taking a soft cloth and wiping away the dust when the screen is turned off. So far this has worked OK for me, but I like knowing I can use a liquid solution as long as I don"t directly spray on the screen.

First, you run the risk of having liquid run down between the diffusion layers on the LCD, or hitting the CCFL in there and shorting out your inverter.

The second problem is that manufacturers sometimes put the T-Con board at the bottom of the TV. Or if it is a plasma. you have buffers that run along the bottom edge. Again shorting those out will kill your monitor/TV.

It"s just as easy and safer to spray the cloth you wish to use rather than the screen itself. The screens are not sealed in anyway, so any drips can possibly cause damage if they get inside.

You don"t spray it on the screen because cleaners used to damage the seal on the bottom edge of the screen. I don"t believe is still happens as long as something reasonable is used. The warning is most likely still there simply to cover themselves if someone uses something that is much to harsh and allows it to drip down the screen.

I actually spray the liquid (i.e., eyeglass cleaner or the solution they make specifically for LCD screens) on the screen all the time, and haven"t noticed anything bad come of it. I think the fear is that the droplets from the spray makes permanent splotches on the screen. It"s there for only a brief second but maybe with the heat of the screen those splotches get burned in somehow? I"m not sure, but I"ve done it -- I wipe right away and do it when the screens turned off -- and I haven"t had any problems with it.

As with any electronic item, televisions attract dust and are magnets for smudges and children"s fingerprints. Luckily, learning how to clean a flat-screen TV is fairly straightforward, requiring very little time and few materials. Regardless of whether you have an LCD or a plasma TV, all flat-screen TVs are made out of thin, flexible materials and should be treated very gently. They have extremely sensitive components, and using chemical cleaners may lead to a broken or blank screen (so skip the window cleaning spray!). Even ordinary kitchen towels or paper towels can cause marks and scratches on the screen. Here"s the right way to clean a flat-screen TV and prevent costly damage.

Turn Off the TV.Shutting off your monitor will not only help you see where dirt and dust have collected, but it will also give your screen time to cool down. A warm or hot screen will be harder to clean, increasing the chances that you"ll accidentally damage it if you scrub too forcefully.

Consult the Owner"s Manual (seriously!).If you take a quick survey of the different cleaning recommendations from various flat-screen TV manufacturers, you"ll quickly discover that many of the directions conflict with each other. When in doubt, check your owner"s manual or look online at the manufacturer"s website for instructions on how to clean your flat-screen TV. This cautionary step will prevent you from doing something the manual warns against, thus voiding your warranty.

Wipe Only With a Soft Cloth.Gently wiping the screen with a dry, soft cloth may be the only universally agreed upon method for cleaning a flat-screen TV. While this will likely take care of any surface lint, it may not be enough to remove oil or dirt. Be warned, an attempt to scrub the screen by using any amount of pressure may only cause the liquid crystals inside to misalign or burn out.

Then, Try a Damp Cloth.Unless your owner"s manual specifically prohibits it, carefully wipe the screen with a damp, lint-free cloth. When using water, be sure to spray onto the cleaning towel rather than directly onto the screen. This will give you more control over where the water is going and how much is being used. Have a dry towel handy for carefully drying off the screen.

Add a Drop of Dish Soap.In certain instances, like when your TV gets mixed up in a food fight or when a child with grimy hands insists on touching the screen, you may need to use a little soap to clean the surface. Mix a singular drop of dish soap into one-fourth cup of water and apply to a soft cloth. Wipe the mess away using the soapy cloth. Then, lightly dampen a second cloth in water to wash off any soapy residue. Finally, dry the screen with a third soft, lint-free cloth.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.