oled lcd display arduino manufacturer

Orient Display is a company that specializes in manufacturing OLED modules with competitive prices. The company was founded in 1996 by specializing in fields of production, R&D, quality controls. Thanks for the management and employee’s continuous hardworking and enormous effort and shareholder continuous investment over years, Orient Display factory is now the world’s lead standard and customOLED display module manufacturer in flat panel industry and is listed as a public company in China stock market. Now, Factories have complete quality and environment management system, ISO9001, ISO/IATF16949, ISO14001, IECQ QC080000. It is also No.1 in the world for automotive capacitive touch screen which took around 18% market share in the world automotive market.

Orient Display develops a line of products for customer to buy Arduino OLED display modules to have hands on experience. They range from 0.66”, 0.68”, 0.83”, 0.95”,0.96”, 1.09”, 1.3”, 1.54”, with resolution 64×48, 96×32, 96×39, 96×64, 96×96, 128×64. The interfaces have the options of 6800,8080 parallel, 3 or 4 wire SPI, I2C and RGB interface. 3.3V power supply, extremely wide viewing angle and extremely operating temperature. It’s through hole connection by default. Our standard OLED products colors have yellow, blue, white and full color, but we have a lot of other sizes, resolutions and colors to choose available either as standard or custom OLED panel display solutions. Orient Display doesn’t have touch panel available in our standard OLED display products but custom made RTP or CTP are welcome and we also provide integration solution for our customers. It’s easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry Pi. It can be used in any embedded systems, industrial device, security, medical and hand-held device.

Fast Response Speed: OLED display response times are around 1,000 times faster than LCD displays; it is around 10 0 μs (0.01 ms). While LCD displays perform poorly at low temperature which has no effect on OLED display performance.

Greater Contrast: LCD displays need backlight to be seen which makes some light leaking to cause losing contrast, while OLED displays are true black for background to create superior contrast.

Wider Viewing Angles: LCD displays have genetic drawback of using rubbing process in manufacturing which makes the viewing angle narrower, while OLED displays don’t have such an issue.

Thinner and Lighter in Weight: LCD displays need backlight to light up. The backlight has light guide, diffuser, reflector, BEF, PCB for LED chips etc. which LCD displays difficult to be very thin. OLED screen panel emits light itself which makes it lighter and thinner.

Power Consumption: Again, an LCD screen needs backlight to make it work. The backlight has to light the whole LCD panel even in the sleep mode or only a small fraction of the display to be used, such as showing only time on the cell. Phone. Even with quantum dots backlight technology development, it is still very expensive to use, while OLED can just display part of the pixels selectively to save power.

If you have any questions about Orient Display OLED display panels and OLED display modules. Please feel free to contact: Sales Inquiries, Customer Service or Technical Support.

We have thousands of standard products that are in stock and available from our Seattle, WA and Hong Kong warehouses to support fast product development and preproduction without MOQ. The stock covers TN, STN LCD display panels, COB, COG character LCD display, graphic LCD display, PMOLED, AMOLED display, TFT display, IPS display, high brightness and transflective, blanview sunlight readable display, super high contrast ratio display, lightning fast response displays, efficient low power consumption display, extreme temperature range display, HMI display, HDMI display, Raspberry Pi Display, Arduino display, embedded display, capacitive touch screen, LED backlight etc.  Customers can easily purchase samples directly from our website to avoid time delays with setting up accounts and credit terms and shipping within 24 hours.

Many of our customers require customized OEM display solutions.  With over two decades of experience, we apply our understanding of available display solutions to meet our customer’s requirements and assist from project concept to mass production. Using your ideas and requirements as a foundation, we work side by side with you to develop ideas/concepts into drawings, build prototypes and to final production seamlessly. In order to meet the fast changing world, we can provide the fastest turnaround in the industry, it takes only 3-4 weeks to produce LCD panels samples and 4-6 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen samples. The production time is only 4-5 weeks for LCD panels and 5-8 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen.

A wide variety of oled arduino options are available to you, such as photo, datasheet.You can also choose from original manufacturer, odm and agency oled arduino,As well as from pmoled, amoled, and standard.

NHD-1.69-AU-SHIELD | Arduino Shield with OLED Display | 160x128 Pixels | 262K Full Color | Serial Interface | Built-in Logic Level Shifting for 3.3V & 5V Operation

Engineered in Elgin IL USA, we designed this Arduino shield with our 1.69" full color graphic OLED display. This shield comes with a serial interface OLED display module that has a single row pinout designed for easy breadboarding, supports video, and has all the great features of the graphic OLED. They are not limited to just Arduino boards, with their single row pinout, they can easily be used with any existing development board. The shield has built-in logic level shifting for 3.3V and 5V operation in order to support a broader range of end products. It has open source hardware and software to save engineers time and money. It also comes equipped with a microSD card slot allowing addional storage space for more complex code, eliminating any memory contraints of the Arduino board. For interchangeable development, all three sizes of our color OLED modules (1.27", 1.5" and 1.69") share the same pinout.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (May-11-2021)

ER-OLED032-1W is the graphic OLED display module made of 256x64 individual white OLED pixels,diagonal is only 3.2 inch.The controller ic SSD1322, communicates via 6800/8080 8-bit parallel and 3-wire/4-wire serial interface. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.The fpc is the connector type,we offer optional zif connector(fpc connector).

It"s easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (May-11-2021)

ER-OLEDM032-1G is the 256x64 green pixels OLED display with adaptor board that simplifies your design,diagonal is only 3.2 inch.The controller ic SSD1322, communicates via 6800/8080 8-bit parallel and 3-wire/4-wire serial interface. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.Please refer to below interfacing document for how to switch to different interface. The default interface is 8-bit 8080 parallel.

It"s easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" We prepared the interfacing documents,libraries and examples for arduino due,mega 2560,uno,nano and for raspberry pi or raspberry pi zero.For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

Oculus Go is using a customized LCD from Sharp Display, which has a 1920x3664 resolution, 72 Hz refresh rate. It has a partition backlight system and two separated display areas which correspond to a binocular lens.

The F-35 is a fifth-generation warplane developed by the United States. The F-35 helmet display system has multiple capabilities and must operate in extreme conditions, which requires unique high-brightness Micro OLED display technology.

What is Micro OLED? Why Micro OLED is good choice for AR/VR devices. Apple"s first VR/MR headset will be launched next year. This headset will be equipped with three screens, two of them are micro OLED displays.

FFALCON innovation released the new generation of consumer XR glasses FFALCON Air 1S. uses BirdBath+MicroOLED technology to create a 130-inch high-definition screen experience for users.

The OnePlus Nord Watch features a 1.78 inch AMOLED rectangular screen with a 368x448 resolution and a 60Hz refresh rate. The watch has no built-in GPS, so it can only receive its location from a smartphone via Bluetooth 5.2.

Now LCD is the most common VR device screen on the market, and a few VR  products use OLED screens and  Mirco-OLED screens. Micro OLED is unfamiliar for VR players. Arpara 5K PC VR, the world"s first VR device,  is using the micro-OLED display.

BOE responded to investors about the development of AR/VR display panels, saying that BOE has provided VR/AR/MR smart applications display solutions, including high PPI, high refresh rate of Fast LCD and ultra-high resolution, ultra-high contrast of Micro OLED (silicon-based OLED) and other representative display technology.

As the new energy vehicle market continues to develop in ways that exceed initial expectations, the automotive industry continues to promote the trend towards "electrification, intelligence, Internet connection" and other technological innovations that, when combined, are driving the continuous demand for on-board displays.

SID Display brought together the industry’s biggest players – including BOE, Samsung Display, Tianma, TCL Huaxin, LG Display, Visionox, AUO and Innolux, among others.

According to India"s latest report, Samsung"s Image Display Division purchased about 48 million panels in 2021 and shipped 42 million units. In 2022, meanwhile, it plans to purchase 56 million panels and ship 48 million units in 2022. The panels it purchases will be made up of 53 million OPEN Cell LCD TVs, 1 million QD OLED panels, and 2 million WOLED TV panels.

With the explosive growth of new energy vehicles and vehicle intelligence in 2021, in-vehicle display technology has also undergone a period of rapid development. First, end-users and OEMs have begun to pursue multi-screen, high-resolution, and large-size displays. And, secondly, major panel manufacturers have actively adopted diversification strategies based on their own particular strengths and adjusted their own layouts accordingly.

AM-OLED shows the current is still in the technology leading period, folding, screen camera, narrow frame, high refresh rate, low power consumption, ultra-thin display technology popular with the market, terminal application penetration accelerated, and gradually from smartphones, smart wear small main penetration areas to the car, laptop size expansion, industry in rapid expansion period, no previous display industry facing cyclical fluctuations, the overall industry pattern initially formed.

Yanshun Chen, BOE’s chairman, recently revealed at the performance exchange meeting that BOE"s flexible AMOLED product shipments totaled nearly 60 million pieces in 2021. According to consulting agency data, the company enjoys a global market share of 17%, meaning it ranks second in the world. The company’s goal in 2022 is to ship more than 100 million pieces, a figure which constitutes full production capacity. Production capacity will then be boosted further in 2023, when the company’s Chongqing"s flexible OLED production line starts mass production.

This article shows how to use the SSD1306 0.96 inch I2C OLED display with the Arduino. We’ll show you some features of the OLED display, how to connect it to the Arduino board, and how to write text, draw shapes and display bitmap images. Lastly, we’ll build a project example that displays temperature and humidity readings.

The organic light-emitting diode(OLED) display that we’ll use in this tutorial is the SSD1306 model: a monocolor, 0.96-inch display with 128×64 pixels as shown in the following figure.

The OLED display doesn’t require backlight, which results in a very nice contrast in dark environments. Additionally, its pixels consume energy only when they are on, so the OLED display consumes less power when compared with other displays.

The model we’re using here has only four pins and communicates with the Arduino using I2C communication protocol. There are models that come with an extra RESET pin. There are also other OLED displays that communicate using SPI communication.

Because the OLED display uses I2C communication protocol, wiring is very simple. You just need to connect to the Arduino Uno I2C pins as shown in the table below.

To control the OLED display you need the adafruit_SSD1306.h and the adafruit_GFX.h libraries. Follow the next instructions to install those libraries.

After wiring the OLED display to the Arduino and installing all required libraries, you can use one example from the library to see if everything is working properly.

This is an example for our Monochrome OLEDs based on SSD1306 drivers. Pick one up today in the adafruit shop! ------> http://www.adafruit.com/category/63_98

The Adafruit library for the OLED display comes with several functions to write text. In this section, you’ll learn how to write and scroll text using the library functions.

First, you need to import the necessary libraries. The Wire library to use I2C and the Adafruit libraries to write to the display: Adafruit_GFX and Adafruit_SSD1306.

Then, you define your OLED width and height. In this example, we’re using a 128×64 OLED display. If you’re using other sizes, you can change that in the SCREEN_WIDTH, and SCREEN_HEIGHT variables.

The (-1) parameter means that your OLED display doesn’t have a RESET pin. If your OLED display does have a RESET pin, it should be connected to a GPIO. In that case, you should pass the GPIO number as a parameter.

To draw a pixel in the OLED display, you can use the drawPixel(x, y, color) method that accepts as arguments the x and y coordinates where the pixel appears, and color. For example:

The library also provides methods to displays rectangles with round corners: drawRoundRect() and fillRoundRect(). These methods accepts the same arguments as previous methods plus the radius of the corner. For example:

The library provides an additional method that you can use with shapes or text: the invertDisplay() method. Pass true as argument to invert the colors of the screen or false to get back to the original colors.

Copy your array to the sketch. Then, to display the array, use the drawBitmap() method that accepts the following arguments (x, y, image array, image width, image height, rotation). The (x, y) coordinates define where the image starts to be displayed.

In this section we’ll build a project that displays temperature and humidity readings on the OLED display. We’ll get temperature and humidity using the DHT11 temperature and humidity sensor. If you’re not familiar with the DHT11 sensor, read the following article:

The code starts by including the necessary libraries. The Wire, Adafruit_GFX and Adafruit_SSD1306 are used to interface with the OLED display. The Adafruit_Sensor and the DHT libraries are used to interface with the DHT22 or DHT11 sensors.

The (-1) parameter means that your OLED display doesn’t have a RESET pin. If your OLED display does have a RESET pin, it should be connected to a GPIO. In that case, you should pass the GPIO number as a parameter.

In this case, the address of the OLED display we’re using is 0x3C. If this address doesn’t work, you can run an I2C scanner sketch to find your OLED address. You can find the I2C scanner sketch here.

We use the setTextSize() method to define the font size, the setCursor() sets where the text should start being displayed and the print() method is used to write something on the display.

After wiring the circuit and uploading the code, the OLED display shows the temperature and humidity readings. The sensor readings are updated every five seconds.

The I2C address for the OLED display we are using is 0x3C. However, yours may be different. So, make sure you check your display I2C address using an I2C scanner sketch.

The OLED display provides an easy and inexpensive way to display text or graphics using an Arduino. We hope you’ve found this guide and the project example useful.

Crystalfontz America is the leading supplier of LCD, TFT, OLED and ePaper display modules and accessories. We specialize in providing our customers the very best in display products, cables and connectors.

In addition to our large catalog of displays, we offer LCD development kits, breakout boards, cables, ZIF connectors and all of the LCD software and drivers you need to develop your product or project. We are located in the U.S. so we can get product to you fast!

OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

OLED?s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.

This code should work, however my Diymall .96 Yellow and Blue OLED LCD did not come with a backlight that worked. The address in the WireTransmission line might be different than what is below.