5 tft lcd touchscreen quotation

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (5" diagonal) bright (18 white-LED backlight) and colorful 800x480 pixels with individual pixel control. As a bonus, this display has a capacitive touch panel attached on screen by default.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you"ll have it running in under 10 minutes! Works best with any classic Arduino Mega2560.

ER-TFTM050A2-3-3661 is 800x480 dots 5" color tft lcd display with RA8875 controller board and capacitive touch panel with touch controller,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

The CFAF800480E0-050SC is a 5-inch color TFT LCD graphic display module with high-brightness, sunlight-readable backlight and a capacitive touch panel (CTP).

The touch panel can detect up to 5 separate touch points. This TFT display is suitable for industrial, media, embedded and other general-purpose display applications.

This Bridgetek/FTDI EVE development kit includes a 5" EVE display module with a large bezel. This kit is perfect for demonstrating the EVE module (CFAF800480E2-050SC-A2) or the base display (CFAF800480E2-050SC), simply plug the included Seeeduino to a 5v power source!

The included display is sunlight-readable, has extremely wide viewing angles, large color depth, and the touchscreen glass extends past the edge of the display for smooth mounting.

Have your product stand out with the DT050ATFT display - our 5” TFT LCD module with full viewing angle. The full viewing angle feature allows the display contents of the LCD to be visible from practically any angle. It"s a cost-effective enhancement compared to using an IPS display. The 5" TFT has 800 x 480 RGB resolution and supports 24-bit parallel RGB input mode. The LCD uses two driver ICs to drive the display: a source driver with TCON (Ilitek ILI6122) and a gate driver (Ilitek ILI5960). It also is available with either a resistive touchscreen or capacitive touchscreen panel. This 5 inch LCD is an ideal option for a variety of digital devices including video or POS systems.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Leadtek has paid great efforts on research and development of TFT-LCM, especially on its application of consumable and industrial products. The sizes of LCM includes 1.4”, 2.4”, 3.5", 3.51", 4.3", 4", 5", 7", 8", 10.1” and 11.6". And among them the 3.5”, 4.3", 5", 7” and 10.1" LCM has achieved the leading level of the industry, and mainly applied to vehicle-applications, tablet PCs, smartphones, medical equipment, measurement equipment, E-books, EPC and industrial products, and provides powerful and reliable supports on supplies and qualities. We are cooperating with famous foreign companies on research and developments, and will bring out the series products of industrial control. Also, we explore the overseas market, and build up a long-term relationship with our overseas partners and agents, Leadtek products will be worldwide in the near future.

Quote: This display uses the NT57860 driver IC. I"m using the TC358860 eDP-to-MIPIDSI bridge chip, but I"m not sure whether it can drive this display panel. Is it possible to share the datasheet of this NT57860 driver IC? That way I"m able to verify that. Thanks in advance, With kind regards

TFT displays are full color LCDs providing bright, vivid colors with the ability to show quick animations, complex graphics, and custom fonts with different touchscreen options. Available in industry standard sizes and resolutions. These displays come as standard, premium MVA, sunlight readable, or IPS display types with a variety of interface options including HDMI, SPI and LVDS. Our line of TFT modules include a custom PCB that support HDMI interface, audio support or HMI solutions with on-board FTDI Embedded Video Engine (EVE2).

Note: From 21st Oct 2019 onwards, a micro HDMI to standard HDMI is added in the packing list for the Raspberry Pi 4 Model B board. Making this 5 inch TFT Touch Screen compatible with Raspberry Pi 4 Model B 1GB, 2GB, 4GB.

This 5" TFT touch screen display with resolution of 800 x 480 is perfect for your Raspberry Pi 2 or 3. The back of the LCD is designed to be stacked on your Raspberry Pi board nicely. It even comes with a socket for HDMI for perfect and nicely fit your Rpi right under the LCD.

Note:The TFT display will draw quite some power from the 5V, default from Raspberry Pi (via 40-pin GPIO) if it is stacked on Raspberry Pi. So do use a high current adapter to power your Raspberry Pi.2.5A or 3.0A adapter would be good enough. Or you can check out the USB-C 5V 3A power adapter (White or Black) for Raspberry Pi 4B.

Note: From 21st Oct 2019 onwards, a micro HDMI to standard HDMI is added in the packing list for the Raspberry Pi 4 Model B board. Making this 5 inch TFT Touch Screen compatible with Raspberry Pi 4 Model B 1GB, 2GB, 4GB.

This 5" TFT touch screen display with resolution of 800 x 480 is perfect for your Raspberry Pi 2 or 3. The back of the LCD is designed to be stacked on your Raspberry Pi board nicely. It even comes with a socket for HDMI for perfect and nicely fit your Rpi right under the LCD.

Note:The TFT display will draw quite some power from the 5V, default from Raspberry Pi (via 40-pin GPIO) if it is stacked on Raspberry Pi. So do use a high current adapter to power your Raspberry Pi.2.5A or 3.0A adapter would be good enough. Or you can check out the USB-C 5V 3A power adapter (White or Black) for Raspberry Pi 4B.

Digimax distribetes a wide range of professional LCD monitors and large format displays for digital signage applications manufactured by Philips: one of the world"s largest manufacturers of TFT monitors, recognized for quality products and cutting-edge solutions.

Recent trend shows that buyers now prefer colour display & demand for colour tft is increasing rapidly. evolute has already geared up to meet this demand from the industry. It has wide varieties of tft panels from 2. 8" ~19" & can support customers with various makes/ brands from japan, taiwan & china.

The cView Series : Mil-Grade TFT LCD Solutions has been designed and manufactured to encompass a range of Flat Panel Displays for Military or Industrial Applications. The prime focus is to facilitate clearread more...

A thin-film-transistor liquid-crystal display (TFT LCD) is a variant of a liquid-crystal display(LCD) that uses thin-film transistor (TFT) technology to improve image qualities such as addressability and contrast. Application: Television Sets, Computer monitors, Mobile Phone, Handheld Device, POS Device, Tablet Phones, Homeread more...