lcd panel in pc case free sample

I saw a really cool video of a PC case called "Snowblind", that had a transparent LCD Screen as a side panel. I was amazed over how cool it was. The only problem was that it was really expensive. Therefore, I tried making my own! In this instructables I will go through how I made it, and how you could make your own. The best of all, since it was made from an old monitor that was thrown away, it was basically free! I just added some LED strips on the inside of the case to get better contrast on the screen. You could probably re-use the monitors backlight, but it"s safer and easier to just get some cheap LED strips.

The first step is to disassemble the monitor. The disassembly is pretty well documented in the video I made. I have also added some pictures so you can see the steps. The steps of disassembling the monitor will not be the same for every monitor, therefore I will not go into detail of every step.

PS: DO NOT DISASSEMBLE THE MONITOR UNLESS YOU KNOW WHAT YOU ARE DOING. THE PSU COULD STILL HAVE SOME CHARGE IN THE CAPACITORS THAT MIGHT ELECTROCUTE YOU.

You will have to reverse engineer the controller to find the power connections, and solder a new power connector on. This way, you can use the ATX power supply that powers your computer. I used a multimeter, where I had one probe to the ground plane (For example around the mounting screws), and used the other probe to search for 5V or 12V power on the pins coming from the power supply.

First, remove the frame of the panel. It is fixed with clips, so just bend the frame a little and lift the frame up. Next, separate the front LCD from the backlight. For the next step, you will have to be careful. This step involves removing the anti glare film. It is glued to the panel, and therefore it"s easy to break the LCD when trying to remove it.

To remove it place some paper towels on top, and then carefully pour water on it until the towels are soaked. Let it sit for around 24 hours. After 24 hours, try to start pealing the layer from the corner. If it sticks in some places, place a wet paper towel on that space and wait some more.

Then you are done modding the LCD! Now, you can hook it up to the panel and test it. Just be careful with the ribbon cables going from the LCD PCB to the panel.

The side panel of this case fits the LCD perfectly. Just line it up to the side facing the back, and to the top, and use some tape to tape it to the glass. Then, use some vinyl on the outside where the LCD is not covering the glass.

Next, use some double-sided tape to fix the LED strips to the inside of the frame. Then, solder them together in series. You can now solder on a wire and connect them to the 12V line of the Molex connector.

It"s really important to have lots of lights inside the case, to make it easier to see the LCD. Therefore, try to fill the case with even more LED strips.

You are now ready to assemble everything. In this case, the controller fit nicely in the hard drive compartment, so I glued it there and fed the ribbon cable through the hole in the inside of the case. That way it was pretty much hidden inside the case.

Now you can carefully mount the side panel back on the computer. You might have to drill a new hole for the thumb screw in the back to make it fit properly.

You can now power up the computer, open the screen settings and set it up for dual screens. You might have to flip the display 180 degrees too. When you have done that, open Wallpaper Engine and set a wallpaper of choice!

I have the same problem, I have read on google that the lcd could also be 3,3v (check if you have 3.3v lanes) so i will be trying to solder a sata cable to it because it comes with 3,3 and 5v connectors but the im not sure if save to use sata cables0

Hey I have a little question, I also have a Dell 1905FP, but I think it"s an older model because I don"t have a ribbon cable but a normal cable with a plug. My problem is that I have peeled off one film but it still looks like there is a second film on the back because it is still a little blurry. But I"m afraid that if I try to pull them off, my LCD display will break. Maybe you have an idea. Thanks in advance

Stunning result ! Bought for 10€ a Dell 1907FPc which is fairly similar to yours. I have trouble identifying the pin layout to find the 5V pin. Did you plug in the power supply to your AC while checking with your multimetter ?0

Great tutorial and video! I"m trying my hand at replicating your process and I even got my hands on the exact monitor. I have reached the point where I"ve disassembled the panel and controllers, and discharged the capacitors from the PSU, but I am a little stuck at this point because I don"t know how to wire up the molex header. I watched your video and saw that you had two wires soldered to the power connector. Which connectors are they and where do they go on the molex cable? Thank you!

Really neat. I saw the same snowblind case and wanted it but too expensive. I also saw someone who made their own using a USB monitor. But I like your setup better.2

Terrific job! May I ask why you would need to remove the front polarizer? If my understanding is correct, both the front and back polarizers are needed in order for the LCD to work properly (i.e., the light gets polarized by the back polarizer first, and then passes through the front polarizer)? You comments will be appreciated!

Hey, great work on this project. I wanted to buy the snowbind case but couldn"t justify the cost. I have the same case and I ended up picking up the same monitor that you used in your project.

Is it possible that you post or send me photos of the inside of the case when you have this installed? I"m just a bit confused on how you wired up everything?

I tried taking some photos, but I have covered the screen PCB with a cover, so it was hard to see in the photos. I basically just laid it inside the case with a 90-degree angle. I tried drawing it here: (view from the front)0

I used "wallpaper engine" to just set the animations as wallpaper on that screen. I mentioned it in the last step, but I could probably make a own step about that, if you are interested in more details.2

I think you should have more pics and info about the re- mounting the LCD. After all if you don"t do it right all that work is for nothing. While I understand your wiring diagram, I think that it should be explained and a larger part of this Instructible...for example to get white lite your are powering all 3 lanes (red,green,blue) on the RGB tape.

Hello, Wonderfull project, I have the same case and I would love to do it (if I have time and the screen to the right size). Just a question, can you put a photo of the cable connection to see if it"s easy to open the case ? One little suggestion, instead of connecting the panel to the graphic card (which mean to run a cable outside, why don"t you use a USB to VGA or DVI converter (like this https://www.amazon.fr/Adaptateur-convertisseur-adaptateur-Affichage-multi-écrans/dp/B079L81FRD/ref=asc_df_B079L81FRD/?tag=googshopfr-21&linkCode=df0&hvadid=227894524041&hvpos=&hvnetw=g&hvrand=17927658121409960098&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9055710&hvtargid=pla-442905712462&psc=1) ?More CommentsPost Comment

All anime characters are not made equal. If a character’s sense of style or cool demeanor hit a fan just right, they might celebrate their love through purchases like figurines or plushies. More recently, gamers have found a more novel way to show off their beloved picks: by trapping anime characters in PC cases.

Rigs showing off people’s favorite characters via tiny LCD screens visible through a PC case with clear side panels often go viral on social media, because it’s a spectacle. While small, these LCDs often show a looped animation of a character while other parts of the PC pulse with RBG lights. Usually, the moments depicted here have anime characters looking powerful or sweet, depending on the tone of the franchise. One popular design, for example, sees fans capturing Kakashi, a ninja and beloved teacher from Naruto, winding up for a powerful attack.

While a number of companies produce PC hardware with this functionality, clips posted on social media often feature components sold by a business called NZXT. NZXT makes what it calls an “AIO liquid cooler with LCD display,” a high-end component that helps keep a computer at an optimal temperature. The accompanying screens are meant to help the user gauge their heat levels, but since you can customize these LCDs to display anything you’d like, fans like to get creative. You can, for instance, show off any gif or image on the LCD — so it wasn’t long before people used the feature to display favorite anime characters.

With prices ranging from $229.99 to $279.99, the AIO liquid coolers with LCDs aren’t cheap. But rather than inducing sticker shock, the hardware has “been amongst the top-selling CPU coolers on the market,” NZXT CEO Johnny Hou told Polygon over email. Hou added that, while initially people seemed skeptical about the tiny screen and its usefulness, seeing it in action on social media helped show people the appeal and depth of personalization possible.

People have been showing off the coolers on social media since the parts were released in fall 2020, though video platform TikTok has pushed the LCD screens in front of millions of viewers. Trends involving the coolers often have anime girls swaying their hips in time to a song called 2 Phút Hơn. That phenomenon then grew to incorporate a wider variety of franchises ranging from anime like Darling in the Franxx to lesser known picks, like characters from a rhythm game called Muse Dash.

For some, like Twitch streamer Emmesux, the LCD screen was simply another way to customize a PC set-up. She told Polygon via Instagram chat that she “bought the Kraken for visual purposes only.” Her character of choice? Killua Zodyck from the anime Hunter x Hunter.

Like a rotating wallpaper, Emmesux will change Killua’s depiction on the LCD screen from time to time, to keep her setup fresh. Sometimes, she’ll pick darker moments, like when Killua appears intense and powerful during the anime. But other times, Killua is displayed in a softer light, like when he’s smiling and giggling with friends. Based on popular picks on TikTok, characters trapped in PC cases like this usually exhibit a similar range of tones and emotions.

The cool thing about this PC hardware sensation is that it goes beyond the aesthetics of “hardcore” RGB gamers, and has also been embraced by those who like cleaner, pastel ambiances too. Everyone, regardless of fandom or gender, has a favorite character they love to celebrate, and these LCD screens provide a new avenue for exactly that. As it turns out, we all like to simp for a well-designed character.

If you want a secondary screen but can’t quite fit one onto your desk, you might want to check out ASRock’s latest invention — a PC side panel display.

PC owners have all that space on their chassis, and nothing to do with it. As long as you’re willing to give up being able to easily peer inside the case (and admire the RGB light show, if that’s your thing), you might like ASRock’s 13.3-inch Side Panel Kit. This is essentially a monitor, similar to that in a laptop, that is attached to the inside of your case.

As the panel is installed within the chassis, your case needs to have a side panel made of transparent tempered glass. It has to be sturdy enough to hold the screen, but it also needs to be see-through so that you can see it in the first place.

For a little side monitor, the IPS display sounds decent. It measures 13.3 inches, has a 16:9 aspect ratio, 1080p resolution, and a basic 60Hz refresh rate. The display seems to be fairly bright and suitable for all kinds of things.

You could use it to simply monitor your PC’s temperatures and speeds, or you could turn it into a proper secondary screen for productivity or entertainment. Granted, needing to view it through the case will probably diminish the experience a bit, but it’s still a fun gadget if you’ve got limited desk space and want an extra screen. If you do get one and plan to use it for productivity, you might need to re-think the placement of your PC case to avoid constantly having to turn and look to the side.

With all that said, there’s one catch — not that many people might be able to use this gadget, and that’s all because of the fact that it has an embedded DisplayPort (eDP) connector. This means that it runs both power and video through just one cable, and while that’s handy, most motherboards don’t support this kind of connection.

As of right now, only ASRock boards support this side panel. Tom’s Hardware reports that only some of the best motherboards for Intel and AMD will qualify, including the Z790 PG Lightning, Z790 Pro RS, Z790 Pro RS/D4,  Z790 LiveMixer, Z790M-ITX WiFi, Z790 PG Lightning/D4, Z790 Steel Legend WiFi, B650E PG-ITX WiFi, and lastly, H610M-ITX/eDP.

This availability is likely to affect the popularity of ASRock’s new gadget. However, if you have one of the required motherboards or you’re planning an upgrade soon, it seems like a fun addition to a PC build.

The specification is subject to change without notice in advance. The brand and product names are trademarks of their respective companies. Any configuration other than original product specification is not guaranteed.

Manage performance, temperatures, and devices all from a single application. NZXT CAM is fast, efficient, and easy to use—putting you in control of every aspect of your PC.

IFTTT integration lets you connect your PC to your suite of existing smart home devices. Trigger music on your smartphone when your PC temp ramps up, or mix up the mood and use applets to sync lighting with your PC and other smart devices. Connect your smartest device, your PC, to your ecosystem for a cohesive and dynamic gaming environment.NZXT CAM x Function Keyboard

With NZXT CAM, your Function Keyboard customizability doesn"t end with purchase. Create custom profiles with unique RGB lighting or intricate macros for a custom look.

See what your computer is up to, from processor load to bandwidth consumption. Monitor how running applications are making use of your gaming PC. Quickly track down any issues to ensure optimal performance.

Customize the behavior of your fans and lighting for different times of day. Set your lights to slowly turn on as your day begins, your cooling devices to run at higher power in the heat of the afternoon, or for your lights to shut off automatically as a bedtime reminder.

Match your computer to how you use it, any time of day or night. CAM will make it so lights and cooling devices will help bring you more into the game than ever before.Contribute to CAM

Canvas FHD gives gamers a competitive edge in fast-paced titles when the heat is on. And for a play-anything monitor, QHD has you covered with immersive Quad-HD gameplay.

The Lift Mouse is a lightweight extension of the human hand. Achieve larger, faster, and more accurate movements, while reducing hand fatigue.Control NZXT Products

In its 114th year, Billboard remains the world"s premier weekly music publication and a diverse digital, events, brand, content and data licensing platform. Billboard publishes the most trusted charts and offers unrivaled reporting about the latest music, video, gaming, media, digital and mobile entertainment issues and trends.

Manage performance, temperatures, and devices all from a single application. NZXT CAM is fast, efficient, and easy to use—putting you in control of every aspect of your PC.

IFTTT integration lets you connect your PC to your suite of existing smart home devices. Trigger music on your smartphone when your PC temp ramps up, or mix up the mood and use applets to sync lighting with your PC and other smart devices. Connect your smartest device, your PC, to your ecosystem for a cohesive and dynamic gaming environment.NZXT CAM x Function Keyboard

With NZXT CAM, your Function Keyboard customizability doesn"t end with purchase. Create custom profiles with unique RGB lighting or intricate macros for a custom look.

See what your computer is up to, from processor load to bandwidth consumption. Monitor how running applications are making use of your gaming PC. Quickly track down any issues to ensure optimal performance.

Customize the behavior of your fans and lighting for different times of day. Set your lights to slowly turn on as your day begins, your cooling devices to run at higher power in the heat of the afternoon, or for your lights to shut off automatically as a bedtime reminder.

Match your computer to how you use it, any time of day or night. CAM will make it so lights and cooling devices will help bring you more into the game than ever before.Contribute to CAM

Canvas FHD gives gamers a competitive edge in fast-paced titles when the heat is on. And for a play-anything monitor, QHD has you covered with immersive Quad-HD gameplay.

The Lift Mouse is a lightweight extension of the human hand. Achieve larger, faster, and more accurate movements, while reducing hand fatigue.Control NZXT Products

Hi everybody! Bill Owen from Mnpctech. I hope you"re having a great day! Several people have asked if I could share the steps on how I do my Touchscreen LCD mod in PC Computer case bezels, and you’ve come to the right video!

I’ve been using this Amazon 5 Inch Capacitive Touch Screens for $52.99 delivered on Amazon Prime, I’ll posted a link in Video description. The kit comes a with Micro USB for power and HDMI video connector, but these cables are too short for these PC case mods. It includes M3 stand-offs, a Driver Disc and some Instructions. It’s a 5 point Capacitive Touch screen with a Resolution of 800 x 460, which is just fine for it’s 5” viewing screen In addition to the LCD touchscreen, I will buy the following cables for my Desktop Custom PC LCD Case Mod.

One 3ft “Right Angle” 270 degree HDMI cord, 6” 90 Degree Angle HDMI Extension Adapter, and 3ft USB Male to Micro B power connector. For Mounting the LCD Touchscreen Panel, I use 3/16” thick Black acrylic to make custom mounting brackets for the LCD touch screen.

You can PAUSE the video on this page to record the measurements that I’ve made for cutting the acrylic. This PC Case Mod is very easy. "The reason I’m making brackets for my desktop PC LCD Monitor Mod?" I want the ability to easily install or remove the Touchscreen with thumbscrews. I’m using 1/8” drill bit for acrylic, and 6/32 thread tap, These Black thumbscrews from Mnpctech.com. I’ll use the 1/8” drill bit to increase the diameter of the holes in the LCD pcb frame.

I discovered these drill bits for plastic several years ago, Notice the bit isn’t splintering or cracking the acrylic as I make the holes. Mnpctech stocks a variety of these drills bits. My mod requires Twelve 6/32 washers, and links posted in description, “Why so many washers?” We want the Touchscreen to mount flush on the backside of the bezel, I also don’t want to apply any unnecessary pressure to the screen or the PCB, See how this sheet of paper easily slides under the screen Next stage is cutting the hole in the bezel, The best PC case for this mod is the ones without optical drive bays, which every popular case manufacturer now offers.

If you’re using an older case with 5.25 drive bays, you could attach a mounting plate with 5” opening that covers THREE 5.25 bays. That’s how we did this mod in the early days of PC Modding. Determine and measure out a location in the center of your bezel, you can also mount the LCD vertically if you prefer, and just change the screen orientation in Windows. Since the bezel is plastic, I’m using a Dremel with 1.5” reinforced cut off wheel, Don’t forget to always wear eye protection when using power tools. Oops, WTH? Hahaha After cutting our 5” diagonal square hole, I’ll hand file the edges so everything is precise and clean. You may have to remove sound insulation foam from backside of your bezel, I’m using E6000 adhesive to attach the two mounting brackets. This adhesive is very GOOEY at first, so consider masking off the screen, to prevent getting any of this on it. I like that it’s tacky for couple of minutes, so I have time to position the LCD in place, and then I’ll temporarily tape it in place while it cures overnight.

Mounting your Touchscreen LCD in the PC this way allows you to easily remove and re-install the LCD at any time. Especially if you ever need to replace it for some reason. Let’s get this LCD touchscreen connected to the PC, all of the cables are routed from the front to thee rear PCI slots. *3ft “Right Angle” 270 degree HDMI cord *6” 90 Degree Angle HDMI Extension Adapter cable, I plug this compact cable into the Touchscreen to save space. *3ft USB Male to Micro B power connector This mod is great if you want an extra screen for monitoring your hardware and temps. You can also display Weather or calendar or email notifications,

Check out http://www.Rainmeter.net this community offers several hundred custom mad graphic interfaces for FREE, and you can configure your screen to display a variety of updated information tasks Thanks for watching! And Again, all of the products used in this PC case mod are listed in the video description.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Accidental Damage is any damage due to an unintentional act that is not the direct result of a manufacturing defect or failure. Accidental damage is not covered under the standard warranty of the product. Such damage is often the result of a drop or an impact on the LCD screen or any other part of the product which may render the device non-functional. Such types of damage are only covered under an Accidental Damage service offering which is an optional add-on to the basic warranty of the product. Accidental Damage must not be confused with an occasional dead or stuck pixel on the LCD panel. For more information about dead or stuck pixels, see the Dell Display Pixel Guidelines.

No, accidental damage is covered for Dell computers or monitors which are covered under the Accidental Damage Service offering for that specific product.

For more information about Dell Limited Hardware Warranty and Dell"s Accidental Damage service offering, see the Dell Warranty & Support Services page.

NOTE: Other damages may be considered customer induced if determined by Dell Technical Support, an on-site field engineer, or at the mail-in repair center.

The LCD glass on the display is manufactured to rigorous specifications and standards and will not typically crack or break on its own under normal use. In general, cracked, or broken glass is considered accidental damage and is not covered under the standard warranty.

Internal cracks typically occur due to excessive force on the screen. This can be the result of some object hitting the screen, a drop, attempting to close the lid while an object is on the keypad area, or even holding the laptop by its screen.

Spots typically occur due to an external force hitting the screen causing damage to the LCD panel"s backlight assembly. While the top layer did not crack or break, the underlying area was compressed and damaged causing this effect.

If your Dell laptop LCD panel has any accidental damage but the laptop is not covered by the Accidental Damage service offering, contact Dell Technical Support for repair options.

Dell monitors cannot be repaired by an on-site field engineer or at the mail-in repair center. If you notice any damage to the monitor, you must purchase a new monitor.

Laptop users can strive to make the most of their laptops to maximize stability, longevity, and usability. Understanding and implementing a few best practices for the safe handling of their laptop will enable them to enjoy their laptop for many years to come. For more information, see the Dell knowledge base article Dell Laptop Best Practices for Care, Use, and Handling.

The basic parts of a desktop computer are the computer case, monitor, keyboard, mouse, and power cord. Each part plays an important role whenever you use a computer.

The computer case is the metal and plastic box that contains the main components of the computer, including the motherboard, central processing unit (CPU), and power supply. The front of the case usually has an On/Off button andone or more optical drives.

Computer cases come in different shapes and sizes. A desktop case lies flat on a desk, and the monitor usually sits on top of it. A tower case is tall and sits next to the monitor or on the floor. All-in-one computers come with the internal components built into the monitor, which eliminates the need for a separate case.

The monitor works with a video card, located inside the computer case, to display images and text on the screen. Most monitors have control buttons that allow you to change your monitor"s display settings, and some monitors also have built-in speakers.

Newer monitors usually have LCD (liquid crystal display) or LED (light-emitting diode) displays. These can be made very thin, and they are often called flat-panel displays. Older monitors use CRT (cathode ray tube) displays. CRT monitors are much larger and heavier, and they take up more desk space.

The keyboard is one of the main ways to communicate with a computer. There are many different types of keyboards, but most are very similar and allow you to accomplish the same basic tasks.

The Print Screen, Scroll Lock, and Pause/Break keys are at the top-right corner of the keyboard. The Print Screen key takes a picture of your screen (called a screenshot) that you can edit or save using a graphics program. Scroll Lock and Pause/Break are rarely used today, so some keyboards don"t have them.

The Escape (Esc) key allows you to stop a function or action. For example, if a webpage is taking a long time to load, you can press the Escape key to stop loading it.

The function keys are labeled F1 through F12. Some programs use these keys as shortcuts for common tasks. For example, in many programs, F1 opens the Help file.

The Tab key is used to create indents in word processing programs. Also, if you are filling out a form online, you can use the Tab key to switch to the next field.

The Control (Ctrl), Alternate (Alt), and Shift keys are designed to work in combination with other keys. Typically, you hold down Ctrl, Alt, or Shift and then type another key to perform a specific task. For example, in many programs, typing Ctrl+S will save a file.

The numeric keypadresembles a calculator keypad. Many users find that it is easier to type numbers using this keypad. On some keyboards, these keys double as arrow keys.

The Enter key (also known as the return key) executes commands. For example, while on the Internet, you can type a website address and then press Enter to go to the site. It is also used to start a new line in word processing programs.

Insert: This switches between insert mode (which inserts new text without deleting anything) and overtype mode (which deletes text after the cursor as you type).

The mouse is another important tool for communicating with computers. Commonly known as a pointing device, it lets you point to objects on the screen, click on them, and move them.

There are two main mouse types: optical and mechanical. The optical mouse uses an electronic eye to detect movement and is easier to clean. The mechanical mouse uses a rolling ball to detect movement and requires regular cleaning to work properly.

There are other devices that can do the same thing as a mouse. Many people find them easier to use, and they also require less desk space than a traditional mouse. The most common mouse alternatives are below.

Trackball: A trackball has a ball that can rotate freely. Instead of moving the device like a mouse, you can roll the ball with your thumb to move the pointer.

Touchpad: A touchpad—also called a trackpad—is a touch-sensitive pad that lets you control the pointer by making a drawing motion with your finger. Touchpads are common on laptop computers.

Take a look at the front and back of your computer case and count the number of buttons, ports, and slots you see. Now look at your monitor and count any you find there. You probably counted at least 10, and maybe a lot more.

Each computer is different, so the buttons, ports, and sockets will vary from computer to computer. However, there are certain ones you can expect to find on most desktop computers. Learning how these ports are used will help whenever you need to connect something to your computer, like a new printer, keyboard, or mouse.

Many computers include audio ports on the front of the computer case that allow you to easily connect speakers, microphones, and headsets without fumbling with the back of the computer.

Most desktop computers have several USB ports. These can be used to connect almost any type of device, including mice, keyboards, printers, and digital cameras. They will often appear on the front and back of the computer.

The back of a computer case has connection ports that are made to fit specific devices. The placement will vary from computer to computer, and many companies have their own special connectors for specific devices. Some of the ports may be color coded to help you determine which port is used with a particular device.

This port looks a lot like the modem or telephone port, but it is slightly wider. You can use this port for networking and connecting to the Internet.

On most desktop computers, most of the USB ports are on the back of the computer case. Generally, you"ll want to connect your mouse and keyboard to these ports and keep the front USB ports free so they can be used for digital cameras and other devices.

This is where you"ll connect your monitor cable. In this example, the computer has both a DisplayPort and a VGA port. Other computers may have other types of monitor ports, such as DVI (digital visual interface) or HDMI (high-definition multimedia interface).

These ports are sometimes used for connecting the mouse and keyboard. Typically, the mouse port is green and the keyboard port is purple. On new computers, these ports have been replaced by USB.

These empty slots are where expansion cards are added to computers. For example, if your computer did not come with a video card, you could purchase one and install it here.

There are many other types of ports, such as FireWire, Thunderbolt, and HDMI. If your computer has ports you don"t recognize, you should consult your manual for more information.

The most basic computer setup usually includes the computer case, monitor, keyboard, and mouse, but you can plug many different types of devices into the extra ports on your computer. These devices are called peripherals. Let"s take a look at some of the most common ones.

Printers: A printer is used to print documents, photos, and anything else that appears on your screen. There are many types of printers, including inkjet, laser, and photo printers. There are even all-in-one printers, which can also scan and copy documents.

Scanners: A scanner allows you to copy a physical image or document and save it to your computer as a digital (computer-readable) image. Many scanners are included as part of an all-in-one printer, although you can also buy a separate flatbed or handheld scanner.

Speakers/headphones:Speakers and headphones are output devices, which means they send information from the computer to the user—in this case, they allow you to hear sound and music. Depending on the model, they may connect to the audio port or the USB port. Some monitors also have built-in speakers.

Microphones: A microphone is a type of input device, or a device that receives information from a user. You can connect a microphone to record soundor talk with someone else over the Internet. Many laptop computers come with built-in microphones.

Web cameras: A web camera—or webcam—is a type of input device that can record videos and takepictures. It can also transmit video over the Internet in real time, which allows for video chat or video conferencing with someone else. Many webcams also include a microphone for this reason.

Game controllers and joysticks: A game controller is used to control computer games. There are many other types of controllers you can use, including joysticks, although you can also use your mouse and keyboard to control most games.

Digital cameras: A digital camera lets you capture pictures and videos in a digital format. By connecting the camera to your computer"s USB port, you can transfer the images from the camera to the computer.

If you already know how to use these images.For viewing the images off-line (120 kB ZIP).All images, but with the color profiles stripped, in case you

© Copyright Han-Kwang Nienhuys, 2008. The text and accompanying images may not be redistributed. This includes placing the images on other websites, either as a copy or through hotlinking. Read more...

Calibrate your built-in video display to get the video quality and look you want when you’re watching streaming HDR video. By calibrating your display, you can set the balance between the details in the bright parts of a scene and the details in the dark parts of it. For example, the bright parts of a scene might include things like sunshine, fire, and light reflections. The dark parts of a scene could include shadows or dimly-lit rooms.

When calibrating your display, the goal is to get a good balance between details in darker parts of a scene (in this case, the windows in the buildings on the left) and brighter parts of it (here, the snow at the top of the mountain).

To calibrate your built-in display for HDR video, your PC needs to be running Windows 10 (Version 1803 or later), and it needs to be able to play HDR video. To find out which version of Windows 10 you have, see Which Windows operating system am I running? For more info about HDR requirements for Windows 10, see Display requirements for HDR video in Windows 10.