gateway fpd1775w tft lcd monitor driver factory

- OR - If your computer has a digital video connector (DVI), connect a white DVI video cable (available in the U.S. at www.gateway.com) to the white connector under the back of the display. Although a standard DVI cable is acceptable, we recommend using the right-angle cable (available in the U.S.

Place the hinge cover over the hinge. The hinge cover came with your optional stand. Attach the hinge cover using the screw you removed from the original neck hinge. Remove the four small screws from the back of the LCD panel. Do not discard the four screws.

Using Your Gateway Flat-panel Monitor Tighten the thumbscrew under the base with your fingers (or a flat screwdriver) to secure the neck into place. With the stand facing you, press the mounting bracket lever to the left and hold it, then remove the bracket from the stand.

OSD Menu Main menu Main Menu Auto Picture Geometry Advanced Reset Picture menu Picture Brightness Contrast Gamma Video Scaling Geometry menu Geometry H-Position V-Position Clock Phase OSD menus Description Auto—Automatically adjusts your monitor to its optimum settings. Picture—Opens the Picture menu, where you can adjust brightness, contrast, and gamma.

CHAPTER 1: Using Your Gateway Flat-Panel Monitor Connect other video sources (such as a DVD player, video camera, or receiver) to the appropriate video jacks on the back of the monitor. S-Video jack Composite video in jack • For basic video quality, connect your video device’s composite video in jack to the corresponding jack on the back of your monitor.

CHAPTER 1: Using Your Gateway Flat-Panel Monitor Slide the adjustable stand’s neck onto the base. Tighten the thumbscrew with your fingers (or a flat screwdriver) under the base to secure the neck into place. With the stand facing you, press the mounting bracket lever to the left and hold it, then remove the bracket from the stand.

Attach the bracket to the LCD panel using the four screws you removed previously. Slide the neck’s bracket slot onto the bracket’s mounting tab. Press the bracket lever to the right and hold it, then lower the neck into place and release the lever.

PIP video display to your Windows desktop, which makes it easier to access your computer programs while watching video. Swap—Switches the PIP image to the main image, and the main image to the PIP image. PIP Picture—Opens a menu where you can set the PIP brightness, contrast, saturation, and tint/hue. www.gateway.com...

CHAPTER 1: Using Your Gateway Flat-Panel Monitor OSD Menu Description Video Adjust menu Unless otherwise indicated, these settings apply only to SD (standard definition) video at 480i and below. Where “PC input” is indicated, the resolutions that apply are from 800 × 600 to 1680 × 1050.

CHAPTER 1: Using Your Gateway Flat-Panel Monitor Humidity Operating: 20~80% (non-condensing) Storage: 5~90% (non-condensing) Altitude Operating: 12,000 feet (3,658 m) Storage: 40,000 feet (12,192 m) Security Kensington lock slot...

Do not expose the monitor to rain or use near water. If the monitor does get exposed to moisture, unplug it and allow it to dry for 24 hours. Call Gateway Customer Care for advice on whether the monitor is safe to turn back on.