fix water damage lcd screen free sample

On top of call difficulties, a broken speaker can also cause problems when watching videos or listening to podcasts. First, carefully check your phone to determine if there is any external damage. If nothing is visible, make sure the latest software update is installed on your device. In addition, try some basic troubleshooting by turning your phone on and off while leaving it unplugged.

Once a phone has water damage — from small spills to a full liquid plunge — there’s often no easy fix. The first step should be to check if your smartphone’s Liquid Contact Indicator has been activated. Most models, including Apple, LG and Samsung, have small visible indicators to show whether water damage has occurred. Consider peace of mind for those inevitable accidents with Verizon’s Verizon Protect or  Total Mobile Protection. Not only is your phone covered if it gets water damage, you may be eligible for a full replacement that same day.

From the rays in a hot car to a sunny day spent at the beach, high temps and direct sunlight can cause serious and lasting damage to a smartphone. Extreme heat can damage a smartphone’s internal components and result in slower speeds or even loss of data. And often the damage is not visible from the outside.

If you’ve ever gotten your phone wet in the rain, dropped it in water or spilt liquid over it, you’re not alone. One study suggests 25% of smartphone users have damaged their smartphone with water or some other kind of liquid.

While new phones are advertised as “water resistant”, this doesn’t mean they are waterproof, or totally immune to water. Water resistance just implies the device can handle some exposure to water before substantial damage occurs.

In 2019, the Australian Competition and Consumer Commission (ACCC) took Samsung to the federal court, alleging false and misleading advertisements had led customers to believe their Galaxy phones would be suitable for:Use in, or exposure to, all types of water (including, for example, oceans and swimming pools).

Similarly, last year Apple was fined €10m (A$15.5m) by Italy’s antitrust authority for misleading claims about the water resistance of its phones, and for not covering liquid damage under warranty, despite these claims.How resistant is your phone?

The water resistance of phones is rated by an “ingress protection” code, commonly called an IP rating. Simply, an electrical device’s IP rating refers to its effectiveness against intrusions from solids and liquids.

A phone that has a rating of IP68 has a solid object protection of 6 (full protection from dust, dirt and sand) and a liquid protection of 8 (protected from immersion in water to a depth of more than one metre).

The popular iPhone 12 and Samsung Galaxy S21 phones both have a rating of IP68. However, regarding exposure to water, the iPhone 12 has a permissible immersion depth of a maximum of 6m for 30 minutes, whereas the Galaxy 21’s immersion limit is up to 1.5m, also for 30 minutes.

While IP ratings indicate the water-repellent nature of phones, taking most phones for a swim will land you in deep trouble. The salt content in oceans and swimming pools can corrode your device and cost you a hefty replacement.

Exposure to water is something manufacturers have in mind when designing phones. Most Apple and Samsung phones come with a liquid contact/damage indicator strip located inside the SIM card tray.

2. If your phone is water resistant and you’ve spilt or submerged it in a liquid other than water, both Apple and Samsung recommend rinsing it off by submerging it in still tap water (but not under a running tap, which could cause damage).

6. Use a compressed aerosol air duster to blow the water out if you have one. Avoid using a hot blow dryer as the heat can wreck the rubber seals and damage the screen.

9. Do not charge the phone until you are certain it’s dry. Charging a device with liquid still inside it, or in the ports, can cause further damage. Apple suggests waiting at least five hours once a phone appears dry before charging it (or until the alert disappears).

It fell in the toilet. Your clumsy partner knocked a glass of water onto it. You forgot it was in your pocket when you jumped into the pool. That"s just a few of the hundreds of ways your phone could come into life-threatening contact with liquid.

Fortunately, waterproofing has become mostly standard on modern phones. New iPhones, Samsung Galaxy devices, and Google’s newest Pixel phones all feature some degree of water resistance or waterproofing. How well a phone resists water is measured on an IP (or Ingress Protection) scale. If your phone is rated with a high number, like IP67 or IP68 protection, congratulations, it’s probably going to be fine! But if it’s got a lower rating, or none at all, you should prepare for the worst before you start chilling in the hot tub with your trusty Sidekick.

So when your phone decides to take a dive, as soon as you"re done freaking out, you"ll probably begin frantically tapping all the buttons, blowing on it, or blasting it with a hair dryer to quickly get rid of all that water. While those are all well-meaning actions, guess what? Totally the wrong approach. Here"s the right way to rescue your water-damaged smartphone.

First, retrieve it as quickly as possible. If your phone is still in the bottom of the jacuzzi or the toilet, get it out ASAP. The longer it"s in the liquid, the greater the likelihood of damage will be.

Do not blow-dry your wet phone or stick it in the oven! Heat can damage the delicate electronics inside. What you should do is give the naked, case-free phone a quick wipe with a clean towel, making sure no water accidentally ends up draining into its charging port, SIM or MicroSD slots, or headphone jack (if your phone still has one). If there are traces of water trapped inside cracks or indentations in the case, try carefully and conservatively using compressed air to blow it out. If you don’t have a can of air lying around, you can use your mouth to gently blow it out. Just be careful not to blow the water further inside the phone, or add any of your own spit to the mix.

Next we have a few different options. If you search the internet or ask a friend, a common piece of advice you’ll hear is to stuff your device in a bag of rice. It might work in a pinch, but that method can cause some problems. While rice is absorbent, it’s incapable of collecting all the moisture hidden deep within your phone, so it only serves as a partial fix. Also, the rice gets mushy and sticky as it absorbs the water, and then you could wind up with gummy bits of rice stuck in your phone’s seams and ports, or dust deep in your device"s crevices. You can wrap the phone loosely in a paper towel before dropping it into the rice, but this is still not your best option.

If liquid damages an iPhone or iPod (for example, coffee or a soft drink), the service for the liquid damage isn"t covered by the Apple One-Year Limited Warranty, but you may have rights under consumer law. iPhone and most iPod devices that were built after 2006 have built-in Liquid Contact Indicators that will show whether the device has been in contact with water or a liquid containing water.

An LCI will activate when it contacts water or a liquid containing water. The indicator"s color is normally white or silver, but when it contacts water or a liquid containing water, it will turn fully red. An LCI won"t activate because of humidity and temperature changes that are within the product"s environmental requirements.

From the beach to the boat, wherever we go to enjoy the warmer weather, our phones are usually right along for the fun—and keeping them above water can be a challenging task. According to 2021 Asurion claims data, more phone repair claims are filed for water damage between June and August than any other time of the year.

So, what is the best way to protect your phone from liquid damage? Asurion Experts are asked this question often while helping our 300 million (and counting) customers with all of their tech care needs. Their advice: Invest in a waterproof pouch. While some of the newest phones are considered “waterproof,” they’ll only be protected if submerged for a set period of time—to learn more, check out our guide to waterproof vs water-resistant phones. Waterproof phone pouches, like those made by CaliCase® or JOTO®, will help to keep your phone afloat.

Here"s what to do if you drop your phone in water or get it wet:Remove it from the liquid immediately. The longer it stays there, the more liquid will seep into various inlets.

Use a cloth or paper towel to dab your phone dry. Do not rub the phone, as doing so could accidentally push liquid into the phone’s more sensitive parts. If the phone was completely submerged, you might try (very) gently vacuuming around the phone’s creases and openings to suck more water out.

If you"ve tried these steps and still need a little help, we"re right around the corner. Schedule a repair at the nearestuBreakiFix® by Asurion or Asurion Tech Repair & Solutions™ store, and our certified experts can get your device back up and running as soon as the same day.

There are a few signs that can confirm water damage to your device:Look for the visual presence of water or evaporation (or dried water markings) behind the screen.

Check the Discolored Liquid Damage Indicator (LDI). The LDI is typically located in the headphone jack, battery compartment, or SIM tray slot. If your phone has water damage, the LDI will appear red or maroon.

According to Asurion Experts, putting your water-exposed device in rice may absorb some moisture. However, it may also cause other issues for your phone, such as an introduction of dust and dry starch (a rice byproduct) into your phone"s cracks and crevices. Rice could also potentially become lodged in your phone"s charging port or headphone jack, which can be extremely difficult to dislodge as the rice swells when exposed to liquid.

Blow-drying your phone when it"s exposed to water is not recommended. While it might remove some of the surface moisture, it will do very little to remove the moisture from inside your device and the heat could do irreparable damage to your phone"s internal components.

Turn the device off and place it in an upright position to dry out, with the speakers facing downward. Doing so will encourage excess water to come out.

Accidental Damage is any damage due to an unintentional act that is not the direct result of a manufacturing defect or failure. Accidental damage is not covered under the standard warranty of the product. Such damage is often the result of a drop or an impact on the LCD screen or any other part of the product which may render the device non-functional. Such types of damage are only covered under an Accidental Damage service offering which is an optional add-on to the basic warranty of the product. Accidental Damage must not be confused with an occasional dead or stuck pixel on the LCD panel. For more information about dead or stuck pixels, see the Dell Display Pixel Guidelines.

No, accidental damage is covered for Dell computers or monitors which are covered under the Accidental Damage Service offering for that specific product.

For more information about Dell Limited Hardware Warranty and Dell"s Accidental Damage service offering, see the Dell Warranty & Support Services page.

NOTE: Other damages may be considered customer induced if determined by Dell Technical Support, an on-site field engineer, or at the mail-in repair center.

The LCD glass on the display is manufactured to rigorous specifications and standards and will not typically crack or break on its own under normal use. In general, cracked, or broken glass is considered accidental damage and is not covered under the standard warranty.

Internal cracks typically occur due to excessive force on the screen. This can be the result of some object hitting the screen, a drop, attempting to close the lid while an object is on the keypad area, or even holding the laptop by its screen.

Spots typically occur due to an external force hitting the screen causing damage to the LCD panel"s backlight assembly. While the top layer did not crack or break, the underlying area was compressed and damaged causing this effect.

If your Dell laptop LCD panel has any accidental damage but the laptop is not covered by the Accidental Damage service offering, contact Dell Technical Support for repair options.

Dell monitors cannot be repaired by an on-site field engineer or at the mail-in repair center. If you notice any damage to the monitor, you must purchase a new monitor.

My Emergency Guy, Inc. is an independent, 3rd party repair shop and has no affiliation with Apple, Samsung, Microsoft or any other electronic design or manufacturing company.Our technicians have have been trained to work on the devices we repair in our shop. All of our repairs involving replacement of parts include a 90 day limited warranty. (with the exception of water damaged devices)You can be sure that the work being done at our shop is of quality caliber and the warranty is to cover any possible defects from the manufacture.

Our parts are tested before hand by quality control testers however there are rare cases where a part may be defective. In this case we will replace the part under warranty, and at no additional cost of labor.Since this is not a product warranty we don’t warranty the entire computer or device after a part is replaced. For example if we replace the LCD screen on a mac book pro and 2 months later the hard drive fails we do not cover the cost of replacement hard drive or data recovery since these are not related (this is just an example and not the opinions of My Emergency Guy, inc. employees to predict that this will happen).

Our replacement parts are intended to solve the initial problem for which we are repairing, if there is a problem with the part that causes it not to preform in the original manner then this may be a defective part. An example would be if you had a phone screen repaired with us because the glass was cracked and a portion of the new screen is not responding to touch, then we will replace this part with a new one and a new 90 day warranty on the part we replaced.

This warranty DOES NOT cover any accidental or future damage to the device or the part(s) replaced by our technicians. i.e if you have had the screen of your phone replaced at our store due to a cracked screen and it breaks again one week, one day or even one hour after leaving the shop we CAN NOT replace it under the warranty or for free. Other incidents not covered by the warranty: Broken/cracked screens or LCD, hairline crack, liquid damage, physical damage or damage from by performing work from outside of My Emergency Guy, Inc.

The simple answer to this question is yes. Any person or persons who do repairs on devices including technicians will be voiding the warranty of the phone unless they are an authorized repair center of that product. If you have had your phone, table or computer for under a year it may be eligible to be repaired by the company it is made by for free in some cases. However most companies do not cover, and consider your warranty void if any of the following occur, accidental damage, physical damage or water damage.

If you are unsure if a problem is covered, we are happy to let you know if we have the correct information we can direct you on how to go about getting it repaired with the manufacture. One example of something that might be covered is a faulty part i.e cameras, charging port, power button etc if the device has not incurred any accidental damage and is under 1 year old. This is the general product warranty.

Bryan-College Stationor 936-577-7788 inHuntsville for a Water Damage Recovery Price Quote from Bryan, Huntsville, and College Station"s Water Damage Repair Professionals

Getting your iPhone, cell phone, tablet, or computer wet is one of the worst things that can happen to it. First. Water damage is one thing that can absolutely destroy iPhones and other electronic devices. Liquid damage is not covered by warranties from Apple, Samsung, and other manufacturers, so it"s a problem that cannot be addressed for free.

Even though your iPhone or other brand of smartphone may be under warranty, Apple and other manufacturers will not replace the phone if there is water damage. Manufacturers can easily spot water damaged phones when processing warranty claims. For example, in the iPhone there are four sensors. They turn pink if the iPhone was submerged in water. If any of these sensors are pink, Apple will not replace the phone. Curious about the odds that we can help you can save a wet phone? Typically, we can fix or recover data from a little more than half of the water damaged phones that are brought in. The water damage recovery cost varies depending on the damage done. For under $50, we can run diagnostics on most devices to ascertain if they can be saved. In the case that we cannot repair the damage, we offer used iPhones and Android devices for sale at affordable prices. If we can fix it, the diagnostic charge will be applied to the water damage repair cost.

First, remove your iPhone from the liquid as soon as possible. The longer the phone is submerged in a water or liquid the worse the damage.Dry your phone as much as possible with a towel or cloth. Next, turn the phone off. Do not turn the phone for any reason. This will prevent more damage to the phone"s internal electronics. Finally, try gently applying heat with a hair dryer. Be careful, too much heat can destroy your device. Place the phone in a bag of rice overnight if the damage happens after the end of our business day. Getting your iPhone to Easy Phone as fast as you can is critical. The faster we can remove the water, the less likely your phone will be permanently damaged. Bring the phone to Easy Phone Repairs in Bryan, College Station, or Huntsville, TX to see how much damage was done and if it can be saved.

Advice above for saving a phone subjected to water damage is not guaranteed to be successful. Water damaged phones that we repair are not eligible for our limited warranty.

"I"ve used these guys a couple of times for iPhone screen replacements and they"ve done excellent work both times. Even when my wife"s iphone 6S plus fell into the toilet (ewwww....) these guys were able to get it back up and running quickly (with a brand new screen), and at a very reasonable price. The Apple store estimated $319, while iPhone Repair Cafe did the work for under $100.

I had to go back once because we didn"t notice that my wife"s phone speaker had stopped working (probably related to that "splashing" incident). In that case, they fixed that additional issue quickly and at no additional charge. They even gave me a free case when they saw how old and yellowed by wife"s old case was.

The MacBook Air was first released in 2008, so there are a lot of models in the wild that might need their screens replaced. The cost of the repair will depend on the model of the MacBook Air, as well as the problem it is having with its screen. Below I will cover the most common models I see for repair and the cost of repairing each model. I have been repairing MacBook Air screens since the beginning, and after repairing a few thousand screens personally, I can confidently say I am an expert Mac screen repair tech.

How much does it cost to replace a MacBook Air screen? The cost to replace a MacBook Air screen is $299 for most models. The A1466 model is $179, while the A1932 and A1279 models are $299. The A2337 model is $299 for the LCD or $429 for the entire display.

This was the longest-running design for the screen on the MacBook Air. All the different models within these years are compatible with the same LCD panels. The cost seems to be coming down on the screen repairs for these A1369 and A1466 models. The cost to repair the screen on a 2010-2017 MacBook Air is $179. This will cover the LCD panel itself, the labor to install it, and the shipping to get the computer back to you.

Apple finally did a complete rebuild on the MacBook Air in 2018 and created a new model number A1932. The newer model has a redesigned display assembly that utilizes a different LCD panel and overall build than the prior 7 years of MacBook Air models. The cost to repair the screen of a 2018-2019 MacBook Air is $299.

The 2020-2021 MacBook Air looks basically identical to the 2018-2019 model, but the new model requires a different LCD panel than the older version of the laptop. There are actually 2 variations on this LCD panel. One is used for the intel-based models, and the other is used for the M1 models. I expect these LCD panels will be one of the harder-to-get models as it was only used for a single model of production.

The cost to replace a cracked LCD panel on an M1 2020 model A2337 MacBook Air is $299. If you would like to have the entire display assembly replaced with a genuine Apple display assembly, the .

Apple once again created an entirely new model with a completely redesigned screen in 2022 with their M2 MacBook Air. This new model hasn’t been out long enough for us to see what the price will end up being once the LCD panel is available on its own. For now, the cost to replace the full display assembly on the 2022 MacBook Air is $450-$750.

There are multiple parts in a display assembly, and chances are they do not all need to be replaced in order to get your computer fully working again. Knowing the basic parts that are required to complete your MacBook screen repair will help you select the correct repair for your needs.

The LCD panel is the part of the screen that displays the image, it is the part of the screen that you can touch when the computer is open. This is the most commonly broken part on a MacBook Air screen. If you have a cracked screen, there is a very big chance that what you need is an LCD replacement.

The display assembly is the entire top half of the computer. It includes the LCD panel, the back housing where the Apple logo is, the clutch cover along the bottom of the screen where it says “MacBook Air”, the iSight camera, and the hinges. If there are any bends or dents on the corners of your display, you will likely need to replace the entire display assembly.

The clutch cover runs along the bottom of the MacBook screen. It is the part that says “MacBook Air” on it. Sometimes I see clutch covers that are cracked or broken while the LCD panel itself is working fine! This means the computer works perfectly and the entire screen is visible and working, but there is a crack along the bottom of the screen in the part that says “MacBook Air” on it. If this is the issue you have, you just need a clutch cover replacement rather than an LCD replacement.

The MacBook Air camera almost never has an issue. If the camera does stop responding, the issue is almost always with the logic board inside your computer rather than the camera itself. Sometimes though, the cameras will fail and require replacement. Unfortunately with the way these MacBook Airs are assembled, you usually have to replace the LCD panel when you replace the camera.

The back housing is sometimes referred to as the “lid”. It is the part that has the Apple logo on it. Usually, the housing does not need to be replaced, but if there is a dent on the corner of the housing, a dent on the housing itself, or if liquid damage is present in the housing, then you will need the housing replaced as well as the LCD. Again, because of the way these are assembled you normally can’t replace just the housing by itself.

There are a few different things you should consider when looking for a screen repair on a MacBook Air. There are many shops to choose from nowadays that offer screen repair services for Mac computers. Making a good choice for the screen repair can be the difference between getting an affordable quality repair, and an expensive repair that doesn’t last as long as it should.

Take your time to research and choose a computer repair shop that you feel good about. With a little effort, you can find a great shop that will take care of your MacBook screen repair needs.

TCRS – I have asked for Tim’s help on logic board repairs many times over the past decade. He does not necessarily specialize in screen repair, but his shop is a great choice if you need logic board-level repairs. They are based in SoCal.

As I said, there are thousands to choose from, so do some research on the ones you are interested in and I am sure you can find a good repair shop to complete your MacBook screen repair.

If you have a MacBook Air that is not covered under AppleCare+, you will spend between $450 and $650 repairing your screen through Apple. There are a couple of different ways that the display repair is billed, so the price you are quoted will vary, but these are the standard quotes. Note that each damage tier is added to by a labor charge, which is usually $100. So a Tier 1 repair is usually about $280 for the MacBook Air + a $100 labor charge.

Tier 1 Accidental Damage does not usually cover the display. It is for other parts that might have been accidentally damaged like the touchpad getting cracked or the fingerprint sensor on the keyboard being damaged. Tier one is usually quoted at $280 + a labor charge at the Apple store, although I have heard it quoted as low as $230 +labor.

Tier 2 Accidental Damage does cover the display, as long as everything else on the computer is not damaged. So if there is a dent or any kind of damage on a component other than the display, it can not be repaired under tier 2. Tier 2 repair is usually about $480 +labor at the Apple store.

Tier 3 Accidental Damage covers the display as well as other components that are damaged, as long as the logic board is still working properly. This tier is usually $530 +labor at the Apple Store.

Tier 4 Accidental Damage covers everything that could have been damaged in the computer, including the logic board. This is the tier that is usually quoted for liquid-damaged computers. A tier 4 repair is usually quoted at $650 + labor at the Apple store.

AppleCare+ does partially cover the cost of repairing a cracked screen on a MacBook Air. When you buy your computer, you are given the option to purchase AppleCare+. If you decide to purchase AppleCare+ and crack your screen, the total for the repair will be $99.

Repair cost through Best Buy is generally the same as through the Apple store. Best Buy usually charges around $450-$650 for MacBook Air screen repair.

Their actual repair capabilities on the store level seem to vary from store to store, but all the Best Buys in my area do not have Mac technicians in the actual store. They do have iPhone technicians and offer screen repair for iPhones (sometimes same-day repairs are available). But for Mac repair, they ship the computer out to be repaired and then have it shipped back to the store after repair.

UBreakiFix is not an Apple Authorized Service Provider. I do not know if they offer a genuine Apple screen (they could be utilizing Apple’s new self-repair program as I do for certain repairs), but I do know that their price for the 2020 M1 MacBook Air “starts at 479.99”. In order to get an exact quote, you have to bring your computer in for their free diagnosis.

The MacBook Air LCD replacement process is one that I don’t recommend for a beginner to an intermediate-level technician to attempt. It is best to start practicing with bad screens before moving on to these repairs. They are delicate and you can cause all kinds of problems during the repair by scratching backlight sheets or ripping cables under the LCD panel.

The display assembly replacement is a lot easier and can be completed by somebody with some technical repair experience. Apple has a self-repair program that covers the A2337 model MacBook Air. You can read about the program and get links in my 2020 M1 MacBook Air screen replacement guide.

I will say I have seen a lot of damaged screens when people attempt to repair the LCD panel on a MacBook Air themselves. Normally the damage is not fixable and you have to then replace the entire display assembly. I have a troubleshooting page for the A1466 MacBook Air if you have attempted a repair and ran into problems.

If you are experienced enough to complete the repair, you can find the panels on public sites like iFixit, eBay, Amazon, etc. As a shop, you will probably want to work with your vendor to get panels that have a guarantee so you can hold them in stock. The price for panels usually ranges from around $100 to about $400 for the newest model. Generally, the panels decrease in price with time, but sometimes if an LCD panel is not used frequently by apple, they will become rare and cost more over time for new ones.

I have put together a few guides on how to replace the LCD yourself. I currently have a 2010-2017 display and LCD replacement guide available. I also have started working on an A2337 display replacement guide that is still a work in progress. I am also working on making video guides for screen repair and hope to have those posted by the March of 2023.

The cost to replace a MacBook Air screen is $299 for most models. The A1466 model is $179, while the A1932 and A1279 models are $299. The A2337 model is $299 for the LCD or $429 for the entire display.

You can repair a MacBook Air Screen yourself, but it requires special tools. The repair is considered to be a moderately difficult repair, so I don’t recommend trying to do it yourself unless you have some experience in repairing electronics.

Apple will replace the MacBook screen for free if there are no cracks or physical damage present, but the laptop must be under warranty or AppleCare+. Sometimes screens will stop working on their own, and these types of problems will be covered under your warranty.

Apple charges between $450 and $650 to replace a MacBook Air screen if it is not under warranty. If you have AppleCare+, the cost to replace the screen through Apple is $99.

This is a great question to discuss with the shop you are thinking of doing the repair. Most of the time the answer is yes, it is worth repairing a MacBook Air screen if the MacBook Air is useful to you. The cost of the repair usually decreases with time, so older MacBook Airs will cost less to repair than newer MacBook Airs.

AppleCare+ generally does not cover a cracked screen completely. Rather it covers all but $99 of the screen replacement service. If there is liquid damage involved, then the charge is $299.

I’m trying to replace the optical layers of my old Dell Inspiron 5100 from an old lcd screen. The question is. in which order should the optical layers be positioned??

When I was fixing my screen I just removed all layers from the old screen and transferred them in the same order into the new screen. I didn’t pay attention how the layers were positioned.

I have a Tecra S3 which is only a year old, just out of warranty. The display just started to have problems mainly with the color red. Little red dots appeared everywhere and the color red had blotches of crappiness in it. Toshiba told me my warranty was over, I figured I’d try to fix it myself. I determined the problem comes from a weak plug in the display

This is exactly what I need. I have damage on the monitor of my Sony VAIO. However, what do we do if we don’t have or know how to find these layers?

I have a Toshiba M100 which is otherwise in great shape but has a problem with the LCD. If you look directly at the screen you can see dark grey spots scattered around the screen. To me this looks like mould or some sort of dirt and it’s definitely on the inside of the screen. So basically, the LCD is dirty on the inside!

To make the story worse, a friend of mine also bought the same laptop from the same source (private seller, used laptop, no warranty) and it also has the same spots. When I was buying the laptop I figured the screen was just plain dirty and I could wipe it off. But it turns out it’s not and the spots are driving me nuts.

Do you know whether or not it would be possible to open the screen and clean the LCD panel? I figure it’s the top glass layer but then again, I could be wrong.

I have a Sony Vaio FRV25. I was having fan problems, opened up the laptop, replaced fan. The screen is now black. I tried an external monitor and nothing happens.

Question: Can one replace only the flexible shiny front plastic cover which protects the Toshiba LCD screen? Mine has a little scratch where the cover bravely protected the LCD from a falling tool. It’s not the end of the world, but if I can replace this easily and economically I’d like to do it. If I could I’d replace it with a protective cover that was not so reflective.

Any ideas ?? i read in one of your posts that you fixed a laptop which wouldnt start because of a lose cable .. do you think this is a similar problem ? or is the motheboard DEAD ?

I have a 15.4” WXGA High-Definition BrightView Widescreen laptop that has a bright white spot that is very notable, what causes this problem? And is it fixable?

Just to say a big ‘thankyou’! Your site gave me the confidence to open my screen cover and swap the broken LCD with a working one…which saved a fortune. Keep up the good work and thanks again.

i read in one of your posts that you fixed a laptop which wouldn’t start because of a lose cable .. do you think this is a similar problem ? or is the motherboard DEAD ?

my daughter accidently knocked my e1505 off my desk now i have a three inch portion of my screen that is white with pink,green and yellow lines running through it,any suggestions

I replaced a cracked screen on an HP Pavilion dv8000. I followed your instructions, but I only get horizontal lines on my new screen. Any ideas what I might have done wrong?

i have a toshiba satellite p105 17”. i tried a massage method to remove a stuck pixel but instead of that when the laptop is turned off there is a circle on the screen which is like a blur bubble. when the notebook is turned on the circle is visible only on black background.i havent put much pressure so to cause damage.

I think I have the same problem as Savvas, tried to do something with probably bad pixels on my Toshiba Satellie A105 which I thought was a dirt at first. I did not do it to hard, but may be it suck water inside and now it has a large blur on the screen, when it is on it is not visible, mostly not even turned on black screen. what bothers me more, is the fact that I have two shiny spots on the screen, pretty visible and it is not dirt (as I have found out), they were there before. Can these be fixed? Can I try to repair at least the shiny spots within manufacturers warranty?

I’ve been striping and repairing laptops since 97′ in Toronto, Canada. I know that it has been pointed out with a big disclaimer, but I think for the average user or “tinkerer’ it would be LCD Suicide to disassemble the LCD layers on a spotty screen !!.

I’m very curious to know what kind of environment you did this in. I.E. Was it a clean room /box or were you just sitting at your desk ? I’m also going to hazard a guess that although you and I may have LCDs lying around in many “stages of broken” very few other people do !!

I’m not saying this guide is for everybody :). If you are not careful enough and have no experience fixing laptops, you can damage the LCD. That was my first time when I took the laptop screen apart. I had to reassemble it three times until I was satisfied. It was really hard to get rid of dust between layers.

I have a dell Latitude D600 and am having a problem with the lcd. When there are large black areas on the screen it kind of blinks black and red in that area. Also, there are very fine vertical lines throughout the whole screen. Dark blues have the blinking redish problem also. Also there is a slight double image of some elements on the screen such as the submit comment button below, I see a pink outline to the right of it. It does look normal sometimes, but a majority of the time it has these problems. Any suggestions? Thanks

Test the laptop with an external screen and see how the external video is displayed. If you have the same bad video on the external screen, there is a problem with the video card.

If you can see the whole desktop, including all icons and taskbar (the image on the screen appears to be compressed vertically), it’s possible it’s just a software related issue. Play with the screen resolution, test if the display works fine in Safe Mode. Try reinstalling the video driver.

Thank you very much for detailing your disassembly with photos. I’ve recently gotten a fully functioning Inspiron 5100 with good external display but the LCD is completely dark. I am considering replacing the backlight or inverter myself and you’ve helped a lot with your pictures. I have the display panel removed but cannot tell one part from another. For instance I wondered if the backlight was behind the top edge or the bottom edge and was the inverter the circuit board in the middle of my display of the one that has the caution tape on it running across the top of the panel.

Is it a thin vertical line about 1-2 pixels wide running across the entire screen? If yes, then there is not much you can do to fix it. It’s a screen problem and you’ll have to replace the screen (or get used to this line).

Post-op I’m convinced the backlight is fine and therefore the inverter is at fault. For roughly $30 I hope to aquire a replacement. This will be a reasonable cost for the fix.

I see that, on your pictures (and in my own laptop) there is that white tape with specific instructions not to touch it. However, it would appear that you are, in fact, touching it when you’re displaying where to remove the screws on the side of the screen.

I believe they put “Do not touch” instructions because there are data cables connecting the circuit board with the LCD and they are located right under the white tape. I think nothing terrible is going to happen if you accidentally touch the tape, but do not push on it because you can damage the data cables.

Secondly, I formatted the C:\ drive and now am trying to install XP…but it keeps turning the screen off after 3-4 minutes…and I have to restart the computer so that the screen comes back again…is there a cure to this? ANY help is appreciated.

If the laptop starts with normal video but after some time the backlight goes off (you still can see an image on the screen) then most likely it’s just a faulty screen inverter. If the screen goes off and there is no backlight or image, then it’s not an inverter issue.

hi, ive justknackered my sceen with water damage, its stillworkingbut a can see a water mark esspecially on awhite background.i don’t fancy taking the screen apart because i have important work on my comp anddon’t wannabreak it. it seems to have subsided, (only damaged it a coupl of hours ago!) what are the chances of it evapourating and evrything bing hunky dory again?

Probably a better chance of that than of you improving your spelling skills. If it was distilled water (pure H2O), you might have a chance of it coming clean. The impurities are what makes a mark and tap water (or bottled) has a bunch of them like trace minerals, microscopic solids, etc. If it was still wet, you might be able to remove the bezel, detached the screws/clips that hold the screen in place, and “drain” it out by taking the screen, holding it vertically, and gently tapping it against a hard surface to possibly spread out or move the water out of the screen. Kind of a long shot, but there’s not much you can do when you don’t want to go to the source of the damage. There’s an active market on ebay for used screens.

Followed the article on LCD screen repair. Found it excellent. Cleaned the glass layer with Walmart glasses cleaner (70% isopropyl alcohol might also work) and used latex gloves without talc to avoid fingerprints, have not taken a screen appart before but dissassembled an old broken one to get the back sheets and learn the pitfalls . The silver back layer does not seem to clean and needs to be replaced if the water damage is on this layer..

i dropped my work laptop in puddle on friday and its wasnt drying out – so followed ur and hp manual instructions to take screen apart dried various bits of lcd screen 90% sure they all back correctly as they only fit in one way and now have vertical lines across screen n no picture hooked it up to external monior and it worked ok. ple\se tell me i haven’t messed it up! and theres something i can try to put it right so that i odnt have to crawl back in to work n get b******ed

Thanks very helpfull, I also tryied to fix my LCD screen for the first time. I got a replacment on ebay for a LCD 15″ dell insiron Model 5100 but the cable connections are diffrent from LCD to mother board as my old one . Any idea where I can get a cable?

I need a screen for my Dell Latitude C640. I dropped it and the screen broke. Do you know where I can find one real cheap. The computer works fine. I live in Richmond, Va. Right now it is hooked up to a regular monitor.

Probably the cheapest one you’ll find here. I just searched for “Latitude C640 screen” and found two LCDs, one for $85 and another one for $65. I think this cheap enough.

Hi! I have successfully transferred LCD screen from Inspiron 6000 to Inspiron 6400 but I had to take along inverter and video cable. I really like this particular screen and I wonder if it likely to be compatible with other brand laptops? I plan to upgrade to a santa rosa laptop and don’t want to limit my choices to Inspiron 1520. Thanks!

I ony Vaio FRV37 with possible moisture damage around the outer edge. I never had to clean the screen so I’m not sure if it is moisture. The damage- some spots with dark uneven middles that fade out then go dark at the outer edges – some are at least 1/2 inch in diameter. The extensive damage from right side across the top to left side and are darker at inside edge and lighter closer to bezel. All spots are very noticable on white background. I cannot find any examples of screen damage to compare. I need to know is this indeed water spots or LCD damage so I can fix it or replace it. I do have another undamage screen as replace but only as a last resort. Thanks for writing such an informative article.

My dughters Inspiron 6000 has the black screen problem with (very) faint image. How can I tell if it’s the backlight or inverter which is bad and can the backlight be changed on this model without the horror story above ? Thanks for any help you can give, a local repair shop is quoting £180 for a fix !

Another problem I have is that one of the sreens just does not work, that is to say the backlight is fine, but no image. I am sure that the inverter and the cable to the screen is OK, as they work properly with another screen.

Take a look at the example 2. Does it look like your screen. If it does, most likely you have a faulty screen. You’ll have to replace the screen in this case.

I dropped my laptop about couple of months ago. the top corner of frame is cracked. i turned on computer a thin line bluish/white vertical from two inches from the edge. it ran ok. its starting to get larger due to opening and closing the laptop. it is a hp new model. when i hold the screen tight the line does get thiner. please help

If the LCD screen lights up and you can see an image on it, even though the image is completely garbled or distorted, the problem is not related to the screen inverter. When the inverter goes bad the LCD will not light up at all.

You’ll have to test your laptop with an external monitor connected to the laptop VGA port. Set the laptop to output video on the external screen. If both internal and external screens display the same bad image, most likely you have a problem with the video card. If this defect appears only on the laptop LCD but no on the external screen (external screen works fine), then most likely your laptop has a defective screen.

I have an HP zd7249. My screen is not functioning properly. When the computer is on, the screen is dark, but I can see that a light, which I assume is the backlight, is actually lit. From what I have read here, that would indicate that the CCFL and the inverter would be fine. I should also note that I have connected the laptop to an external monitor, and I get a perfect image. What do you think my problem is?

I’m using a Dell XPS M140. About 8 months ago I replaced the LCD screen. Currently when the laptop is running off the battery the screen will stay lit for about two mintues and then go dark. You can still see the image in the background. When running off the AC cord the LCD will remain lit. I was wondering if this is something that I did incorrectly upon install or if I have an off setting somewhere. Thanks.

I was running from my car to front door wile it was storming and some rain drops somehow got in the lcd screen. I have a Compaq Presario V300 made by HP and it is basically new and is a great system. As soon as I got inside and noticed the damage, I looked up on google “I got water in my laptop screen”. This was the first site and it worked great!!!! I read through and followed all directions (my lcd is connected to the laptop a little different though). It worked perfectly and I was able to get all the rain water out before it was able to dry and stain. I recommend this to anyone with the same problem. Just like the directions say, be very careful though! THANK-YOU THANK-YOU THANK-YOU ! ! ! ! ! ! ! !

When the computer is on, the screen is dark, but I can see that a light, which I assume is the backlight, is actually lit…I should also note that I have connected the laptop to an external monitor, and I get a perfect image.

Could be a connection issue between the motherboard and the screen. First, I would try reseating the video cable connector on the motherboard, it’s easier to access this one. Second, I would check the connection between the video cable and the LCD screen. To access this one, you’ll have to open up the display assembly and take a look on the back side of the screen. Make sure the video cable is plugged in correctly, all the way inside the socket.

a few weeks ago a family member left my laptop in a postion where no air could come out of the ventilators. when i discovered this my laptop was really hot. Now my laptop will begin to heat up and won’t cool down unless i shut it off. Also, my computer screen doesn’t look right. It’s hard to see, especially on darker backgrounds. how can i fix this?

My DV1000 screen went dark (with faint images of the screen) 2 weeks ago – I ordered a new inverter (from invertercentral.com) that was supposedly compatible with my DV. Replaced the inverter and found out that the old one didn’t have the exact same number as the new one.

Now my laptop will begin to heat up and won’t cool down unless i shut it off. Also, my computer screen doesn’t look right. It’s hard to see, especially on darker backgrounds.

I have question about removing all the films fron an Inspiron 6000 LCD screen and replacing them. First, is there anywhere I can get new film sheets? Second, when I put everything back together, is there a schematic on the placement of the film sheets and/or does anyone know what order they are supposed to be in? This is a used laptop that I aquired and someone has already taken the LCD completely apart. All the parts are there and there are no visible scratches or anything like that but I notice that the clear plexiglass panel is thicker on one edge than the other. I am going to assume that that is because it sits on the backlight but I really want to know before I start in on this. I have the film sheets (Background?) laid out like they came to me but if I could find a schematic showing which one goes in first, second, etc. I would be in heaven.

It’s possible that the video cable got pulled from the connector on the back of the LCD screen and is not making a good connection with the screen. Reseating this connection might help, I would try it first.

Yes, I believe these transparent layers has to be placed in the order they were removed. If someone has already taken the LCD screen completely apart and didn’t assemble it back the way it should be, probably your are screwed. I think you’ll have to find a new screen.

Hi, I have a problem with my laptop, recently I turned on my laptop and the screen stays plain white, I could hear the sound of windows started, but it stays white, if I remove the power cable, the screen will start dimming, on the other hand, I tried to test the LCD screen on my brothers Identical laptop and it WORKED wonderfully, when tried to put it back to mine, it’s WHITE! this is frustraiting! anybody please help me..

Your LCD screen works fine with another laptop, so there is nothing wrong with the screen. Apparently, you have a problem either with the video cable or the motherboard/video card.

The lid catch on my Compaq Evo N600C is broken; I have obtained a damaged N600C screen with a good catch system. However, I cannot discover how to separate the screen form the bezel so I can remove the catch system. I have removed all screws I can see, but the top left and left side will still not separate.

Sometimes HP glues the LCD bezel to the screen with double-sided sticky tape. In cases like this I usually insert a piece of plastic (guitar pick, credit card, library card, etc…) between the bezel and the screen and move it alone the side to separate both parts. Be careful with the screen.

I took it apart and found the problem. On the left side of the LCD (screen facing you, back behind you), it has some flexible circuits that connect with the white tape. When one part doesn’t touch the white tape, the image is dark (or has vertical lines). Applying pressure connects the circuit to the tape.

This flexible circuit has a lot of very small connectors. I’m afraid you cannot fix it at home. Maybe you can put a piece of eraser between the screen and the screen top cover, so it always apply pressure on the screen? It’s just a wild suggestion but it might work.

I have a Dell Inspiron 6000 with a wsxga+ lcd that is cracked and displays weird colors when turned on. I have tried it with an external monitor so I know the video card still works. Here’s the question: my buddy has a screen from a Dell Inspiron 1520 with the same resolution and he is willing to let me have it cheap. How can I find out if it is compatible? I don’t want to bother him and have him ship cross-country if it won’t work. I have conflicting answers from others who say it will work no problem and also that it won’t work because of the inverter. I’ve searched everywhere I could think of to no avail. Since you sound extremely knowledgeable, What do you think? Any help would be greatly appreciated. Thanks.

I doused my Inspiron 6000 with water and had water between the laminaire of the LCD. I tried all the stuff recommended by others, but in the end I did the exact same thing you did, except I cut the sealing tape and applied new when done. Mine is now as good as new.

A couple of tips. You need the right tools, and patience. Dont try to get along without a good quality 0 and 00 phillips, aluminum foil tape and mylar tape. To clean the various layers I used eyeglass cleaner wipes, and changed them often. The alcohol in them kills any organisms, and they are lint free. The LCD itself is relatively simple, and more durable than everyone seems to let on. Take your time and roll the layers over as you clean them so you dont mess up the order. An ice tray will allow you to sort the screws. Make sure the LCD is properly supported all the way across its surface on a book and soft cloth, and dont do this when tired or upset. By the way I cleaned the LCD panel too, and it caused no damage whatsoever. Good luck to all. JimA

I have a toshiba portege a100 12.1 inch laptop with a cracked lcd. Is it possible to use the lcd from an m100 12.1 inch and transplant it into the a100?

I had a sploshy screen on the bottom right corner of my Laptop, due to spilling fluids on the laptop, it showed up as super bright patches on the LCD.

Both the cable connectors are the same. 20 pins. However, I have not purchased the screen from the m100 as I do not know if it will fit. The A100 has 2 circuit boards attached to the screen and the M100 screen only has 1. I am asking so as to know if if should purchase the M100 screen online from auction.

Hi i have a dell D600 latitude and the front cover is very badly scratched when you removed the lcd could you have easily removed the front lid cover as i want to change mine to a nice new lid/cover but i dont know how to go about it is it easy to change the fron cover can you advise on how i could do this please many thanks

I don’t know if the screen from M100 will work on A100. I’ve tried to research online but it looks like both screens have different part numbers and they might require different video cables. If I would be you, I would search for the original A100 screen replacement. Find the part number on the back of the LCD screen and search by the part number. It will help you to avoid unnecessary waist of money.

I have a cracked screen on my dell d410. I was able to replace the lcd, but when i booted up, the screen showed white. Is there something wrong with the inverter or video cable?

Test the laptop with the cracked screen again and see if you can get image. If you get it with the old (cracked) screen but not with the new one, probably your new LCD is bad and you’ll have to replace it.

Thank you so much for your detailed instructions on taking about the lcd..Dell didn’t send any instruction with the replacement and this was my first time attempting this…I was able to follow the instructions without wrecking anything….and now my user is happy happy happy!!!! Thanks again~!

Disregard the blurry picture. That’s my lack of photography skills. Instead, please tell me what’s making any LCD I connect to this laptop display images (including BIOS screen) 4 times. Despite the bad photography, the 4 images are perfect representations of the 1 image that is supposed to be seen on the display, i.e. no blurriness or dimness. External monitors show the 1 image perfectly.

this might be the wrong place, but you guys seem to know about this stuff, but … is it possible to rip the lcd off a dead laptop and with some messing about, get it to act as a standalone lcd vga monitor ?

I want to use my D600 screen on my Dell 610 (D610 screen has 3 cracks over it, that’s why I want to change screens). Every thing looks the same when I take it apart, except one thing. The cable from my D600 has more wires connected to the screen. The socket itself looks the same, so I can move the cable from D600 to D610 or vice versa. But when I boot the D610 with the D600 screen, I have tiny colourful strips all across the screen. It doesn’t matter witch cable I use, same result. The screen cables has a tag, the D600 has CSSWJ.Wanshih REV.3A 04/03/15 DD0JM1LC0000 and the D610 CSFFOL.Foxconn REV.3A 06/01/03 DDJM5BLC107. Can I do anything to make this work?

i spilled a small amount of diet coke on it towards the left side of the keypad. now when i try to turn it on all the lights come on for about 5-8 seconds then they turn off and no activity on the screen.

Can anyone tell me how to fix this or what to look for when i take it apart?Look for corrosion on the motherboard. Apparently the motherboard has been damaged by coke.

When the laptop is switched on the LCD shows a dark gray light (for less than a second) and then turns black. Earlier it used to flicker and come back but one day it just went black and is same since then.

Now, assuming that I am correct in the above assumption, it could be the video cable or the LCD screen/circuit itself. I have removed and replugged the video cable but nothing happens. Is there a way I can guarantee a faulty video cable without trying another one? (i suspect the answer to be no)

Now the final question, I am willing to buy a new LCD screen for my notebook and its available on ebay (and a few other sites). But is it possible that its not the fault of the screen at all? Could it be the circuit on the motherboard between the video card and the LCD connector on the motherboard that is breaking the signal? I ask because if this is the case then even buying a new screen wouldn’t help.

I have tried my screen on another laptop (Inspiron e1405) which has a different video cable connector to the motherboard. But I managed to attach my LCD (of Inspiron 2200) to e1405 using its video cable and the LCD works fine (I used my inveter only).

I recently revived a friends laptop that had been his daughters. The display is splotchy. He is not interested in spending $100 for a replacement LCD panel. It displays text OK. Thats enough for him. The colors are muddled. I do not think it is bad pixels, as during the Dell diagnostics routine, it displays solid colors perfectly. It does not display red well when mixed with other colors. The colors are perfect when displayed on an external CRT monitor.

Just a quick ?. I do not want to throw good money after bad. I bought ny daughter a Dell Inspiron 2200 about 3 years ago. She used it about 20 hours watching dvds. About 2 weeks after the 1 year warranty, the screen went dark. If you have light shining on it at the right angle, you can see and read what is on the screen. Obviously, it works fine with a monitor.

Your instructions on how to replace the layers was quite informative. However, could you please advise if this solution is applicable to a lcd with different colored vertical lines on the screen at startup and windows?

Thank you for so detailed instructions . I have read trough all posts but don’t find neccessary answer. How do You think- changing LCD layers will help to remove white spots? Now I san “see” through monitor and see all support points behind LCD as white cloudy spots. I have Dell Latitude D600. Thank You

The whole process took a total of 30-minutes to effect repairs on a severely crack LCD Panel on a Gateway MX6124. I Can not Thank These People Enough For Helping Explain What I thought was an ardious task being made simply for a layperson.

While creating this guide, I had to disassemble/assemble the screen a few times. It wasn’t as easy as it looks in the instructions above.