tft display en espa帽ol factory

TFT displays are full color LCDs providing bright, vivid colors with the ability to show quick animations, complex graphics, and custom fonts with different touchscreen options. Available in industry standard sizes and resolutions. These displays come as standard, premium MVA, sunlight readable, or IPS display types with a variety of interface options including HDMI, SPI and LVDS. Our line of TFT modules include a custom PCB that support HDMI interface, audio support or HMI solutions with on-board FTDI Embedded Video Engine (EVE2).

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

Orient Display sunlight readable TFT displays can be categorized into high brightness TFT displays, high contrast IPS displays, transflective TFT displays, Blanview TFT displays etc.

The brightness of our standard high brightness TFT displays can be from 700 to 1000 nits. With proper adding brightness enhancement film (BEF) and double brightness enhancement film (DBEF) and adjustment of the LED chips, Orient Display high brightness TFT products can achieve 1,500 to 2,000 nits or even higher luminance. Orient Display have special thermal management design to reduce the heat release and largely extend LED life time and reduce energy consumption.

Our high contrast and wide viewing angle IPS displays can achieve contrast ratio higher than 1000:1 which can make readability under strong sunlight with lower backlight luminance. High brightness IPS displays have been widely accepted by our customers with its superb display quality and it has become one of the best sellers in all our display category.Transflective display is an old monochrome display technology but it has been utilized in our color TFT line for sunlight readable application. Orient Display has 2.4” and 3.5” to choose from.

Blanview TFT displays are the new technology developed by Ortustech in Japan. It can provide around 40% of energy consumption for TFT panels which can use smaller rechargeable or disposable batteries and generate less heat. The price is also lower than traditional transflective TFT displays. Orient Display is partnering with the technology inventor to provide 4.3” and 5.0”.

Orient Display can also provide full customized or part customized solutions for our customers to enhance the viewing experience. Orient Display can provide all the different kinds of surface treatments, such as AR (Anti-reflection); AG (Anti-glare), AF (Anti-finger print or Anti-smudge); AS (Anti-smashing); AM (Anti-microbial) etc. Orient Display can also provide both dry bonding (OCA, Optical Clear Adhesive), or wet bonding (OCR, Optical Clear Resin and OCG, Optical Clear Glue) to get rid of light reflective in air bonding products to make the products much more readable under sunlight and be more robust.

Touch panels have been a much better human machine interface which become widely popular. Orient Display has been investing heavy for capacitive touch screen sensor manufacturing capacity. Now, Orient Display factory is No.1 in the world for automotive capacitive touch screen which took around 18% market share in the world automotive market.

Based on the above three types of touch panel technology, Orient Display can also add different kinds of features like different material glove touch, water environment touch, salt water environment touch, hover touch, 3D (force) touch, haptic touch etc. Orient Display can also provide from very low cost fixed area button touch, single (one) finger touch, double finger (one finger+ one gesture) touch, 5 finger touch, 10 points touch or even 16 points touch.

Considering the different shapes of the touch surface requirements, Orient Display can produce different shapes of 2D touch panel (rectangle, round, octagon etc.), or 2.5D touch screen (round edge and flat surface) or 3D (totally curved surface) touch panel.

Considering different strength requirements, Orient Display can provide low cost chemical tampered soda-lime glass, Asahi (AGC) Dragontrail glass and Corning high end Gorilla glass. With different thickness requirement, Orient Display can provide the thinnest 0.5mm OGS touch panel, to thickness more than 10mm tempered glass to prevent vandalizing, or different kinds of plastic touch panel to provide glass piece free (fear) or flexible substrates need.

Of course, Orient Display can also offer traditional RTP (Resistive Touch Panel) of 4-wire, 5-wire, 8-wire through our partners, which Orient Display can do integration to resistive touch screen displays.

Engineers are always looking for lower cost, faster, more convenient interfaces to transmit signals and to accept data and commands. The numbers of available interfaces available in the market can be dazzling. Orient Display follows market trends to produce various kind of interfaces for our customers to choose.

Genetic Interfaces: Those are the interfaces which display or touch controller manufacturers provide, including parallel, MCU, SPI(,Serial Peripheral Interface), I2C, RGB (Red Green Blue), MIPI (Mobile Industry Processor Interface), LVDS (Low-Voltage Differential Signaling), eDP ( Embedded DisplayPort) etc. Orient Display has technologies to make the above interface exchangeable.

High Level Interfaces: Orient Display has technologies to make more advanced interfaces which are more convenient to non-display engineers, such as RS232, RS485, USB, VGA, HDMI etc. more information can be found in our serious products. TFT modules, Arduino TFT display, Raspberry Pi TFT display, Control Board.

Dynamic Displays, Inc. specializes in manufacturing RGB industrial computer monitors and rugged video displays for the factory floor and process control markets. Our rugged industrial LCD display monitors range from Open Frame CRT monitors, to NEMA 4 rack mount LCD displays, to panel mount RGB industrial LCD monitors. With horizontal scan frequencies ranging from 15-50kHz for slow scan and 30-90kHz for fast scan, high flicker-free refresh rates, and three, four, and five-wire video format compatibility, our industrial CRT replacement LCD monitors continue to be used in a wide variety of industrial applications, extending the life of older-generation CNC factory equipment. Our rugged video display systems operate under a wide variety of modern and legacy video formats and resolutions, including CGA/EGA digital TTL formats, VGA, SVGA, XGA, SXGA and UXGA computer video formats, RS170/RS343 RGB-sync-on-green video formats, differential ECL and TTL video and Sync inputs, and many more. We also offer other options for our rugged industrial LCD display monitors, such as touch-panel capability, sunlight readability options, vandal shields, and anti-reflective coatings just to name a few. If you have a unique monitor need for your industrial displays, please call or email us directly.

We develop, design, manufacture, and sell displays where it is necessary for the interface that deliver a lot of information at an instant and deliver it to the global market. We create interactive spaces that go beyond the expected, elevate everyday lives, and move people"s hearts. From bases in major cities in Asia, Europe, and North America, we build strong customer relationships by developing products that respond to market needs.

TOKYO, June 15, 2020 - Mitsubishi Electric Corporation (TOKYO: 6503) announced today that it will end the production of TFT-LCD modules manufactured by its wholly owned subsidiary Melco Display Technology Inc. (MDTI), aiming at June, 2022. The production termination is due to the changes of business environment. The company will shift its and MDTI"s operating resources from LCD business to its business growth drivers such as power devices, and will aim further growth and development.

The company"s LCD business, currently focusing on small and medium-sized TFT-LCD modules for industrial and automotive use, has been expanding its business by developing and launching high value products with advanced technologies in the specific market segments based on the market needs. However, the company has decided to end the TFT-LCD modules production and terminate the business based on the consideration that the company is no longer able to maintain the products" competitiveness under the situation that the global competition involving the company"s focusing segment of high display performance and high reliability expands and intensifies with significant falling in price.

There is no significant impact on the company"s consolidated business performance. The consolidated business forecast for the current fiscal year (ending March 31, 2021) announced on May 11, 2020 reflects the influence of the TFT-LCD modules" manufacturing termination.

With the maturity of TFT technology in the early nineties, the rapid development of color LCD flat panel displays, less than 10 years, TFT-LCD quickly grew into the mainstream display, which is inseparable from the advantages he has. The following and I come together to understand its main features.

In TFT LCD liquid crystal display module, according to the formation of different reasons and differences in location and shape, line defects can be divided into screen breakage class line defects, screen short circuit class line defects, short circuit between the terminals class line defects, drive abnormal class defects, etc

At present, most liquid crystal display technology to TN/HTN/STN/FSTN TFT and other technologies as the main axis, so we will discuss their operating principles from these technologies.

VA segment LCD, also known as BTN segment LCD, is widely used in small home appliances, high-end instrumentation products on the display screen.What are the advantages and disadvantages of VA segment lcd? VA segment LCD advantages 1, VA segment LCD…

TFT (Thin Film Transistor) LCD is a kind of active matrix type liquid crystal display (AM-LCD), which is widely used in notebook computers, desktop computer monitors, LCD TVs, LCD projectors and various large electronic displays because of its fast response…

TFT LCD display is a thin film transistor type liquid crystal display, that is, «true color» (TFT). TFT liquid crystal is equipped with a semiconductor switch for each pixel, and each pixel can be directly controlled by dot pulse, so…

What is Character LCD Display and Graphic LCD Display? There are many people do not understand what is the meaning. Then also do not know how to start, and sometimes blindly to contact, and then lead to unnecessary trouble, but do not have to worry, Sinocrystal will introduce you what is Character LCD Display & Graphic LCD Display, so that you can understand more about this aspect of the content, and I believe you will have a harvest after reading!

FPC cable is one of them, in layman’s terms, FPC cable is the connection line. FPC cable is same as the composition of FPC because it is a kind of FPC. FPC is generally long and designed as pluggable pins at both ends, which can be directly connected to the connector or soldered to the product.

LCD module is a component that assembles liquid crystal display devices, connectors, integrated circuits, PCB boards, backlight, and structural parts together. The English name is LCD Module, or LCM for short. It’s actually a commercial component.

LCD Module in the market has a very strong competitiveness, which was concerns by more and more businessman. But, what’s the advantages of this module? here Sinocrystal would like to give you an inventory:

Liquid crystal display (LCD) is widely used in pocket instruments and low-power application systems because of its many advantages, such as low power consumption, small size, rich display content, thin and lightweight. What is the LCM LCD module and what…

What is the mainstream screen type of LCD liquid crystal display? Sinocrystal would like to make a brief introduction to the production plant of LCD. Regarding LCD and OLED, as mentioned at the beginning of the previous article, the current…

Thin film transistor liquid crystal display, often referred to as TFT LCD , is one of most used liquid crystal displays. It uses thin film transistor technology to improve image quality. Although TFT-LCD is collectively referred to as LCD, it…

Why is it difficult to do a large-size VA LCD Display, and what problems are prone to occur? Sinocrystal would like to make a briefly explain to help you

1.1, Check the log, (On MTK platform keyword «LCMAutoDetect») to ensure that the LCD Display driver is loaded successfully. 1.2, With an oscilloscope to view DVDD, (AVDD, VGH, VGL, VCOM) (some interfaces of the screen built-in these voltages) the voltage…

Regarding , we often hear about bangs, full-screen, waterfall screen and so on. In fact, these are just forms of screen presentation. At the end of the day, the two main types of mobile phone screens commonly found on the…

In 2008, the domestic flat panel display industry, represented by BOE and CSOT, grew explosively and formed a national strategic pillar industry, while TFT polarizer — one of the three core components of LCD, was completely blank in mainland China…

Sinocrystal analyzes the laser used in the repair of TFT-LCD liquid crystal display -LCD manufacturer In recent years, the field of active matrix liquid crystal displays has developed rapidly, and TFT-LCD liquid crystal displays have also undergone an iterative transition of large-size, color, and high-definition…

1. LCD wants to clarify the matter of these screens, but also to start with the LCD screen. The LCD panel industry is now becoming increasingly unprofitable. Samsung and LG Display have significantly reduced LCD production lines, and Panasonic has simply…

COG LCD screen manufacturers, LCD screens, segment code screen manufacturers, customized products, Shenzhen Huazhijing With the continuous improvement of the performance and development of Android phones, many iPhone users have switched to the Android camp. However, there are many people…

Everyone’s views on mobile phone screens have always been very different LCD parties all believe that OLED displays are at low brightness PWM dimming has a very serious screen flicker phenomenon This problem will not only affect the look and…

According to Sinocrystal’s understanding, the shortage of panel components is gradually alleviating, and Chinese panel makers have gradually removed bottlenecks and increased new production capacity. Sinocrystal warned that next year’s panel supply and demand might fall into an oversupply crisis again.

On March 20th, BOE stated on the investor interaction platform that in 2020, BOE will ship nearly one million flexible folding OLED products, and its global shipments are second only to Samsung.

The chip is out of stock, the Ministry of Industry and Information Technology will do a good job in the implementation of relevant policies, promote the free flow of factor resources, create a fair and just market environment, support domestic and foreign companies to increase investment, and continue to improve the supply capacity of integrated circuits.

New iPhone 13 Series will use On-Cell OLED Displays. And it that will be launched in the second half of this year will be exclusively supplied by Samsung Display (SDC)

TFT Panel and TFT Module Price Will Increase Further As we all know, for Panel and IC short, the Display and Modules especially for TFT Displays has increased a lot In past half year. And now we have the bad…

Russia Customer Visiting on August and October This is a customized 2"" IPS TFT LCD Display project, it takes around 2 months from the first time meeting to order delivery. Our friend Filipp has visited us for 3 times.

Italy Customer Visiting On November 6th, We had the meeting talking about TFT LCD Displays for 3.5"", 4.3"" and 10.1"". Also we have communicate about the solution for mono LCDs.

Russia Customer Visiting on August and October This is a customized 2» IPS TFT LCD Display project, it takes around 2 months from the first time meeting to order delivery. Our friend Filipp has visited us for 3 times.

Italy Customer Visiting On November 6th, We had the meeting talking about TFT LCD Displays for 3.5"", 4.3"" and 10.1"". Also we have communicate about the solution for mono LCDs.

Sinocrystal ensure a work environment free from forced labor or slavery, unlawful child labor, and human trafficking. And we not tolerate the use of forced labour, child labour or human trafficking by any employee or Supplier in the operation

It is the most famous flat glass manufacturing technology at present. This method transports the molten glass paste in the furnace to the liquid tin bed. Because of its low viscosity, the thickness of the glass can be controlled by the baffle plate or the tie rod. As the glass paste increases, the glass paste is gradually solidified into flat glass, and then the solidified glass plate is led out by the guide wheel, and then it is formed by post-processing procedures such as annealing and cutting.

When using the float method to produce ultra-thin flat glass, it is necessary to control the low glass paste feed rate. First, the glass ribbon (R ibbon) entering the tin bed should be cooled to about 700°C. At this time, the viscosity of the glass ribbon is about 108 poise ( Poise; 1 poise = 1 g / cm•sec ), and then use the edge roller to pull the glass paste floating on the liquid tin, and after it is stretched out, the glass ribbon is heated to 850℃, and the external force is applied with the conveyor roller Pulled by.

The float process technology adopts the horizontal lead method, so it is easier to use the elongated horizontal production line to meet the annealing requirements. The main reason why the float process technology has not been widely used in the production of ultra-thin flat glass with a thickness of less than 2 mm is that it cannot achieve the required economic scale. For example, the daily output of float technology can almost meet the monthly consumption of the current Taiwan market; if the float technology is used to produce ultra-thin flat glass, it is generally produced in a discontinuous tank kiln (D a yTank). Therefore, it is very important to optimize the design of the slot kiln.

(2) Flow hole down-drawing method: As far as the special ultra-thin flat glass required for flat-panel tft display displays is concerned, many manufacturers use the flow hole down-drawing method for production. This method uses low-viscosity homogeneous glass paste to introduce platinum In the slot bushing groove made of alloy, the thickness of the glass is controlled by the force of gravity and the pull-down force and the size of the mold opening. The temperature and the size of the orifice together determine the glass output, and the flow hole The size of the opening and the draw-down speed jointly determine the thickness of the glass, and the temperature distribution determines the warpage of the glass.

The orifice down-drawing process can produce 5 ~ 20 metric tons of ultra-thin flat glass with a thickness of 0.0 3 ~ 1.1 mm per day. Because platinum metal cannot withstand high mechanical stress, most molds made of platinum alloys are generally used. However, the orifice is often deformed when it is subjected to external forces, which results in uneven thickness and surface flatness that cannot meet the specifications. Its disadvantages.

The flow hole down-draw method must be annealed in the vertical direction. If it is turned to the horizontal direction, it may increase the contact between the glass surface and the roller and the warping caused by horizontal conveying, resulting in a large increase in the defect rate. Such concerns make the construction of the furnace must adopt a design with high ceilings, and at the same time, the height required for annealing must be accurately considered, which greatly increases the difficulty of the project and is also reflected in the cost of building the plant.

A long-shaped fusion pump (Fusion Pump) is used to transport the molten glass paste to the center of the fusion pump, and then use the overflow method to transfer two overflowing glass pastes to the pump’s center. The lower part is combined into ultra-thin flat glass.

The use of this molding technology also requires a heavy mold, so the molten pump mold also faces the problems of deforming due to mechanical stress, maintaining the level of the molten pump, and how to stably drive the molten glass paste into the molten pump. Because the thickness and the quality of the glass surface of the super flat glass made by the overflow melting method are determined by the amount of glass paste delivered to the melting pump, its stability, levelness, the surface properties of the pump, and the quality of the glass.

The fusion overflow technology can produce ultra-thin glass substrates with dual original glass surfaces. Compared with the float method (only a single original glass surface can be produced) and the flow hole down-draw method (which cannot produce original glass surfaces), It can avoid post-processing processes such as grinding or polishing. At the same time, in the flat-panel display manufacturing process, there is no need to pay attention to the difference in the properties of the glass surface due to the original and different glass surfaces that are in contact with the liquid tin or the grinding media. And so on, has become the mainstream of ultra-thin flat glass forming.

We strive to provide quality smartheart digital arm cuff blood pressure monitor reviews, bp montior, infrared thermometer forehead reading and considerate services to the public in industries closely related to human life. The company is supported by technology to improve the company"s international competitiveness and comprehensively promote the upgrading of the industrial structure. We"ve got a lot of customers in many countries. We realize the automation of production control, informationization of management, platform of operation and maintenance and wisdom of decision making.

The company continues to improve Factory Direct Sale TFT Display Fingertip Pulse Oximeter Finger Pulse Oximete Oximeter Finger SpO2 Jumper Blood Oxygen Monitor quality and service quality, and continues to create value for customers! We have been pursuing the tenet of "realistic and innovative, rigorous and dedicated" for many years. Relying on its own industry advantages, the company continuously observes the market and continuously develops new products.

Winstar is a global leading Manufacturer of TFT LCD display based in Taiwan and China. Winstar offers a wide product range of small to medium sizes TFT display modules in sizes ranging such as 0.96",1.28", 1.77, 2", 2.4", 2.8", 3.2", 3.5", 4.3", 5" 5.6", 5.7", 7", 8", 9", 10.1", 10.2", 12.1" , 12.3" and 15" TFT (diagonal size of the active area) and so on . There are more than 250 TFT standard models listed on this website; furthermore, almost each item is acceptable to derivate from the standard items to meet the customers" requirement.

Winstar TFT displays are qualified under industrial standard including standard TFT-LCD modules, IPS TFT, High brightness TFT LCD (sunlight readable display), TFT panels with controller boards, Bar Type TFT, Wide Temperature TFT LCD, Winstar Clever System TFT and Touch screen display. These displays include landscape or portrait modes. Winstar has Mono TFT displays and full color TFTs in line, these displays are available in various resolutions as well as touch screen optional in resistive and projected capacitive (PCAP touch screen) technology. Many of our TFT display modules have more than one interface available including MCU, RGB, TTL, LVDS and MIPI DSI. Winstar TFT modules are perfect for a number of applications including industrial control, coffee machine, medical equipment, POS system, automation, GPS navigator, white goods, energy control, telecoms, medical equipment and etc.

Shenzhen Leadtek EIectronics Co.,Ltd. is a national high-tech enterprise established in 2015. We are committed to the R&D, manufacturing and sales of LCD screens, touch screens and integrated display solutions. All our products have passed CE, RoHS, FCC and ISO 9000 certification.

Leadtek manufacturing centers are located in Fuyong Shenzhen, FAE and sales technical support centers are located in Bantian Shenzhen.The production plant covers an area of 30,000 square meters and has more than 300 employees. In the future, we will strive to build a high-tech enterprise with global influence, diversified businesses and markets, and build a globally competitive LCD brand.