lcd display fading brands

I"ve been the happy owner of a D7000 for many years now. I"ve noticed in the last 6 months that the LCD has started to fade in a circular direction from the corners. I haven"t put much use into my camera - less than 3,500 actuations of the shutter - so wasn"t expecting this to happen. Would like to know if anyone has had the same issue and if it can be resolved easily. What would be the cost?

I have not seen this mentioned in 10 years of dpreview, while every problems becomes discussed over and over again, whether a real or imagined problem. So I guess failing LCD on D7000 is not frequently happening. I had 2 D7000 and they are still heavily used by family members, about 10 Nikon in the family, hardware failures encountered in 10 years include 4 issues  due to user error: 2 times banged camera/lens into something, 2 times dropped camera into water. After 4 years past recovery from dropped into water, a D5000 passed away by mechanical shutter failure. Also one off brand zoom lens failed after years of heavy use.

LED-backlit LCD TVs typically come in one of two sub-types of panels: Vertical Alignment (VA) or In-Plane Switching (IPS). VA panels tend to have much high contrast ratios, and therefore better black uniformity. IPS panels, on the other hand, have worse contrast ratios and suffer from more backlight issues that can affect black uniformity, including "IPS glow", which is a kind of "glow" effect that can be seen in the corners of IPS screens.

LED-backlit LCD TVs are prone to black uniformity issues, but OLED TVs can produce virtually perfect blacks because their pixels are self-emitting, and therefore don"t have the same limitations caused by improper backlight implementation. That means they don"t suffer from clouding or flashlighting as LED TVs do.

Non-uniform frame pressure. Both the LCD screen and the diffuser layers are somewhat flexible. A slight difference in pressure on the frame of the television can change the uniformity of the picture. On some televisions, this can be fixed (see below).

For clouding, there"s a pretty simple fix that—while not guaranteed—can have good results. Power on the TV and display a black image. This will allow you to see the lighter spots on the screen. Next, take a soft cloth and massage those brighter spots to improve the uniformity. You should only apply very gentle pressure, just barely touching the screen. You can also try a few different stroking patterns. If you are patient enough, this works surprisingly often, especially on edge-lit TVs, although you should be very careful to avoid damaging your screen.

Black uniformity refers to how evenly a TV can display black across the screen, especially when displaying a bright object over a dark background. It’s important when watching dark scenes in a dark room, and while most people shouldn’t notice black uniformity issues like flashlighting and clouding, they can become more apparent when the issues are especially bad. You won’t need to worry about these problems in rooms with lights on, though. For each TV, we take a photo of a black frame to capture the black uniformity, and then we calculate the color values of the pixels to find the standard deviation of the uniformity. We then do the same with local dimming enabled.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

From cinema content to motion-based digital art, Planar® Luxe Displays offer a way to enrich distinctive spaces. These professional-grade displays provide vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior decor.

From cinema content to motion-based digital art, Planar® Luxe MicroLED Displays offer a way to enrich distinctive spaces. HDR support and superior dynamic range create vibrant, high-resolution canvases for creative expression and entertainment. Leading-edge MicroLED technology, design adaptability and the slimmest profiles ensure they seamlessly integrate with architectural elements and complement interior décor.

Planar® CarbonLight™ VX Series is comprised of carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility, available in 1.9 and 2.6mm pixel pitch (wall) and 2.6mm (floor).

Carbon fiber-framed indoor LED video wall and floor displays with exceptional on-camera visual properties and deployment versatility for various installations including virtual production and extended reality.

a line of extreme and ultra-narrow bezel LCD displays that provides a video wall solution for demanding requirements of 24x7 mission-critical applications and high ambient light environments

Since 1983, Planar display solutions have benefitted countless organizations in every application. Planar displays are usually front and center, dutifully delivering the visual experiences and critical information customers need, with proven technology that is built to withstand the rigors of constant use.

Leading screen manufacturers like Samsung have turned to nanotechnology that, ironically, can’t even be seen by the naked eye but produces jaw-droppingly rich, vibrant displays. An emerging technology called Quantum Dot enhances flat-panel LED displays, commercial TVs and curved widescreen monitors, revealing many more colors and adding the necessary brightness to take full advantage of technologies like High Dynamic Range (HDR).

Quantum Dots are essentially nanoparticles that manufacturers add to the layers of films, filters, glass and electronics — sometimes called the sandwich — that comprise a Liquid Crystal Display (LCD). When these Quantum Dots are illuminated, they re-emit light of a certain color. Developing the technology for the primary QLED colors (red, blue and green) has been a technological feat, and one Samsung has overcome with its R&D hub Samsung Advanced Institute of Technology (SAIT). The team successfully developed blue QLED technology in 2020.

Because of its investment in R&D, Samsung is, by far, the market leader in Quantum Dots development and display products, with a category it calls Quantum LED (QLED). Other display manufacturers using Quantum Dots technology often include “Q” or “Quantum” in product names to make the distinction from conventional LCDs.

Quantum Dots-enhanced displays compare favorably with super-premium Organic LED displays (OLEDs), but usually at less cost, and with none of the technical issues and limitations that OLED introduces (more on that later). Quantum Dots technology first found its way into the premium TV market, and is now increasingly being used by image-sensitive brands for commercial applications such as digital signage, where the depth and accuracy of color is critically important.

Quantum Dots are usually applied to a sheet of film that sits as a layer in that “sandwich” in front of the LED backlight that’s used to illuminate an LCD. The light passes through the LCD display stack, with the Quantum Dot color filter layer enhancing and enabling the LCD to reveal a wider and more saturated range of colors than would otherwise be possible.

Many consumer and B2B brands place heavy importance on how their products look to the marketplace. Their brands’ colors are not just blue and red — they are very specific blues and reds. Brand owners often have rigorous guidelines that mandate how these colors are reproduced, and in the case of digital displays, Quantum Dots technology provides the level of accuracy they want. Samsung’s QLED displays, for example, enable more than a billion colors.

By one estimate, Quantum Dots increase the color gamut on LCD displays by up to 50 percent. That broad range of colors also enables more saturated colors — the vivid, intense color levels that “pop” on screens and draw viewer attention.

Using Quantum Dots means the range of colors and their accuracy is maintained even at peak brightness, while other display technologies like OLED might wash out colors when scenes require full brightness. The result with QLED is accurate, rich and detailed colors on displays, in any light.

Quantum Dots LCD displays are often compared to OLED flat panel displays, with both billed as premium visual experiences. To a casual observer, they can look very similar, but there are distinct differences.

In pure technical terms, they’re different in that LCDs are illuminated by integrated but distinct LED lighting arrays, whereas OLEDs are self-emissive — each pixel is its own light.

Both technologies offer a huge range of colors, delivering eye-popping visuals. But while Quantum Dots can reproduce that full range of colors even at peak brightness, when the image on an OLED display becomes too bright, its color capabilities are compromised, and diminishing the available spectrum. Samsung QLEDs have peak brightness levels as high as 4,000 nits, which is brighter than what’s needed for outdoor displays to overpower the glare of direct sunlight.

When flat panel displays first came into the marketplace, much of the marketing story and buyer interest focused on their shape and scale. Then the focus turned to resolution, shifting from 720p to 1080p HD and then to 4K and even 8K.

Size and pixel counts are important, but in many respects the real determining factors for brands and business users is visual quality. The real benefits of Full HD, Ultra HD and beyond come when a display can deliver that volume of detail with an exceptional depth of color, no matter the visuals. Samsung’s QLED technology is supported by AI-powered machine learning, which can scale 4K UHD and Full HD content to 8K resolution without compromising quality.

Quantum Dots may seem like a term that could only excite nerds, but one look at a QLED display will generate admiration even from people who don’t want to know all the technical details.

Explore Samsung’s full lineup ofQLED displays, designed deliver realistic detail and vibrant color to showcase your business in the best light. Looking for more buying advice? You can find everything you need to know about choosing your LED displays for optimal viewing indoors and out in thisfree, comprehensive guide.