lcd display fading quotation

Image burn-in, also referenced as screen burn-in or ghost image, is a permanent discoloration of sections on an electronic display caused by increasing, non-uniform use of the screen.

The term burn-in dates back to when old monitors using phosphor compounds that emit light to produce images lost their luminance due to severe usage in specific display areas.

Most of the time, these guides explain how image retention works and how you can speed up its recovery process. We want to clear up any confusion you might have about image burn-in and image retention on LCD and OLED displays.

Image retention, also known as ghosting or image persistence, is the temporary effect of images remaining visible on LCDs or OLEDs for a short period, usually a few seconds.

Image retention doesn"t require any intervention from the user to make it go away – it"ll do that by itself. Retention will often occur before burn-in does on newer display technology like our

using a screen saver, cycling various graphics on the screen to exercise the pixels, and powering off the display whenever possible will help clear the image retention on your display.

When LCD or OLED pixels stay activated in a static position, they"ll eventually become "stuck" in that position. When this happens, you"ll notice a faded, stubborn image that persists on the screen.

After showing a static image for long periods of time, the crystals in a liquid crystal display become weaker to move, and have more difficulty turning from the fully "ON" position to the fully "OFF" position

When pixels fail to activate or deactivate entirely, it results in faded images that won"t clear from the screen. This is common in applications using character LCDs where the alphanumeric characters are updated less frequently.

OLEDs are unique because they don"t need a backlight to light up. Each pixel on the display is a self-illuminating LED, so they generate their own light. However, the pixels inevitably lose their brightness over time. The longer an OLED pixel is illuminated, the dimmer it will appear next to lesser-used pixels.

If a static image stays on an OLED display long enough, the pixels will leave a shadow behind the previous image, even when the display shows something completely different.

Remember: There"s no way to remove or reduce burn-in after it occurs. If a stubborn image persists for extended periods or after restarting your display, you"re likely dealing with image burn-in.

Even the most advanced displays will experience burn-in at some point, but there are some simple actions you can take to extend your screen"s lifespan before burn-in occurs. With the proper practices, you can get years of outstanding performance from your display without any burn-in effects.

If a power cycle isn"t an option, you can use the display ON/OFF command to turn off the display. Alternatively, you can put the display into sleep mode while retaining the display data in RAM.

A screensaver is a good alternative if you can"t turn your display off. For displays that don"t need to be ON at all times, it"s helpful to let the screen rest when not in use.

For an OLED display, decreasing the contrast will lower the brightness and reduce the rate of image burn. More illumination (brightness) requires more current, which reduces OLED pixel lifespans.

For a LCD display, lowering the contrast will put less stress on the liquid crystals and will help to reduce the rate of pixels becoming weak, or sticking.

Remember that image burn-in is not reversible and can not be fixed once it happens. Whether it is a scrolling effect, rotating pixels, using a screensaver, or turning off the screen when not in use, it"s essential to establish image burn-in preventive measures to help extend the lifespan of your display.

Like many people, I take a small travel alarm clock with me when I travel. As a matter of personal preference, I don"t like to use my phone for this and I don"t like analog clocks with hands. I want a digital display and a physical snooze button. This sort of thing: