is the backlight part of the lcd screen in stock

The headphone jack sounds like a classic mechanical problem -- the iPod series will pause playback if they think you have unplugged the headphones. Pocket lint often finds its way into the jack, and you can fix it temporarily by blowing air into the jack, but it will eventually fail. You might open the whole thing up to fix the LCD and see if you can clean it better from inside -- there are no specific guides for it, probably because it seems to be soldered in :/

The backlight is part of the LCD assembly -- it"s possible that the problem is with the logic board, but it sounds pretty likely that replacing the LCD will fix your problem.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Afghanistan, Africa, Albania, Andorra, Anguilla, Antigua and Barbuda, Argentina, Armenia, Aruba, Azerbaijan Republic, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belize, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Brazil, British Virgin Islands, Brunei Darussalam, Cambodia, Cayman Islands, Chile, China, Cook Islands, Costa Rica, Cyprus, Dominica, Dominican Republic, Ecuador, El Salvador, Falkland Islands (Islas Malvinas), Fiji, French Guiana, French Polynesia, Georgia, Greenland, Grenada, Guadeloupe, Guatemala, Guernsey, Guyana, Haiti, Honduras, India, Iraq, Israel, Jamaica, Jersey, Jordan, Kazakhstan, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Libya, Liechtenstein, Macau, Macedonia, Maldives, Marshall Islands, Martinique, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Nauru, Nepal, New Caledonia, Nicaragua, Niue, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Qatar, Reunion, Russian Federation, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, San Marino, Saudi Arabia, Solomon Islands, Sri Lanka, Suriname, Svalbard and Jan Mayen, Tajikistan, Tonga, Trinidad and Tobago, Turkmenistan, Turks and Caicos Islands, Tuvalu, Ukraine, United Arab Emirates, Uzbekistan, Vanuatu, Vatican City State, Venezuela, Wallis and Futuna, Western Samoa, Yemen

APO/FPO, Africa, Alaska/Hawaii, Anguilla, Antigua and Barbuda, Aruba, Asia, Bahamas, Barbados, Belize, Bermuda, British Virgin Islands, Canada, Cayman Islands, Costa Rica, Dominica, Dominican Republic, El Salvador, Europe, French Guiana, French Polynesia, Greenland, Grenada, Guadeloupe, Guatemala, Haiti, Honduras, Jamaica, Libya, Martinique, Mexico, Middle East, Montserrat, Netherlands Antilles, New Caledonia, Nicaragua, Oceania, Panama, Reunion, Russian Federation, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, South America, Southeast Asia, Trinidad and Tobago, Turks and Caicos Islands, Ukraine, Venezuela, Virgin Islands (U.S.)

Affected devices were sold between October 2016 and February 2018. Apple or an Apple Authorized Service Provider will service affected MacBook Pro units, free of charge.

To identify your computer"s model and to see if it is eligible for this program, choose Apple () menu > About This Mac. Eligible models are listed below.

Please choose one of the options below for service. Your MacBook Pro will be examined prior to any service to verify that it is eligible for this program.

Note: If your MacBook Pro has any damage which impairs the service, that issue will need to be repaired first. In some cases, there may be a cost associated with the repair.

The program covers eligible MacBook Pro models for 5 years after the first retail sale of the unit or 3 years from the start date of this program, whichever is longer.

Plazmo is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

MoniServ, Inc.(lcdparts.net/lcdpart.com), we carry thousands of replacement parts  for all types of industrial LCD screens (LCD panels), such as the LCD screens for ATM, PLC,   Kiosks, POS, CNC machinery, Medical, Gaming, Digital signage, Avionic and other industrial applications. Varieties of LED backlight upgrade kits are also available! With simple tools, you can repair these expensive display assemblies at the fraction of the cost

The v1.1 was a significant improvement over the v1.0 but was not reliable enough to be released. So we preferred to continue working on it to correct the remaining flaws and release v1.2 directly, even if it took more time.

To avoid having to solder a lot of wires, we developed the Easy Soldering Guide, a piece of printed circuit board that solders directly to the connector on the original Game Gear display. This connector connects to the main printed circuit board via a ribbon cable.

The installation of the Magic Screen requires (in addition to the original screen and its backlight system of course) the removal of only 3 components.

If you choose to do the complete installation (5 wires to solder so), you can choose between the 7 display modes proposed in order to have the choice according to the game you are playing.

Thus the Magic Screen consumes between 1.6W and 2W depending on the backlight setting chosen and we have chosen to equip the kit with a switch-mode power supply for maximum reliability. We did not want to risk the linear power supply which sometimes causes a short circuit in the kit or in the console.

No risk of burning anything if the console voltage is not perfect thanks to the protections integrated in the circuit. The inductors are also oversized to ensure maximum lifespan.

Note: beyond 3.5W the power supply card has difficulty providing the necessary power to operate the Game Gear. It starts to heat up and wear out prematurely, even more true if you use a flash card like EverDrive which consumes more power than a standard game.

This is especially true when it comes to a video game console that is more than 30 years old and has components that operate at voltages close to 50V. The Sega Game Gear is a fragile console that can be unpredictable.

RetroKAI.store cannot be held responsible for any material damage or personal injury that may occur during the operations described in our installation guides.

Newhaven 16x2 character Liquid Crystal Display shows characters with bright red pixels on a black background when powered on. This transmissive LCD Display requires a backlight for visibility while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-0216K1Z-NSR-FBW-L display has an optimal view of 6:00. This display operates at 5V supply voltage and is RoHS compliant.

Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Choose from a wide selection of changes including shape, size, pinout, and component layout of your PCB to make it a perfect fit for your application.

Hand Held Legend (HHL) is the leading provider of retro gaming upgrades and replacement parts in the United States. Our business is focused on supplying gamers, hobbyists, and modders alike with the highest quality products and services. We are professional nerds that love modernizing and restoring consoles from our childhood. We build consoles our 12-year-old selves would envy.

Our marketplace is open to all vendors and creators alike. If you would like more information, would like to give feedback or are interested in selling your products on our site please contact us at: support@handheldlegend.com

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

All brands on our website are all registered trademarks of their parent companies. All logos, names and images appearing on this site are for nominative and informational purposes only. Images on this website that are property of

Email: sales@mpcstuff.com • Copyright © 2023 MPCstuff - Akai MPC Parts , Accessories , Faceplates and More - All Rights Reserved. • Website designed by Bliss Web Solution Pvt. Ltd.