nextion hmi tft lcd arduino manufacturer

Nextion is a Human Machine Interface （HMI） solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development.

Using the Nextion Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider, etc.) and ASCII text-based instructions for coding how components interact on the display side.

Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube. Available from 2.4″ to 7″ models, Nextion provides an analog touch screen operator interface with programmable function buttons, gauges, progress bars…etc., Nextion is an interface solution designed to complement your application needs.

Nextion Display has so many goods, you may not have a thorough understanding for it. In following blog series, I will give a comprehensive introduction for Nextion. If you are a green hand, these blogs are just the things to help you get started.

There are 6 sizes of Nextion available for your selection: 2.4″, 2.8″, 3.2″, 4.3″, 5.0″ and 7.0″. Users can see the overall detailed parameters from the below table:

Nextion TFT display uses only one serial port to do communication which helps users get rid of the wiring trouble. We notice that most engineers spend a lot of time in application development but get unsatisfactory results. In this case, Nextion editor has provided mass components, such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that users will spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

Nextion display is just the choice to solve your programming problems with the minimum of time and effort. Nextion is a better solution than ever, as users can see its competitive edges as below, not to mention its good price:

3. Objective-oriented controlling method. Nextion supports the commands not only to draw points or lines, but also to control most attributes of the components and materials.

4. Users can control the objects in a demo through serial port commands by external MCU even the demo has already been downloaded and demonstrated on Nextion screen.

Users might get a headache on which size to choose. But we have prepared you very detailed products specification that covering every model of Nextion Display. Have a look, you will know which one to choose according to your project requirements.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results.

In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

This is a powerful 3.5"" HMI, which is member of Nextion family. Features include: a 3.5" TFT 480 x320 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.

The 7" Nextion HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualisation interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module on the market.

The 7" Nextion HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

A wide variety of nextion options are available to you, such as onsite training and inspection, call center and on-line technical support and repair.You can also choose from 4:3, nextion,As well as from new, {2}, and {3}. And whether nextion is 1-year, {2}, or {3}.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion includes hardware part (a series of TFT boards) and software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets you avoid the hassle of wiring. We notice that most engineers spend much time in application development but get unsatisfactory results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce 99% of your development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.

NX8048T070 is a powerful 7.0"" HMI, which is member of Nextion family. Features include: a 7.0" TFT 800x480 resistive touch screen display, 16M Flash, 2KByte RAM, 65k colors.

Nextion is a Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device. It is the best solution to replace traditional LCD and LED Nixie tubes.

This solution includes hardware part - a set of TFT boards and software part - Nextion editor. The Nextion TFT board uses only one serial port to communicate. Get rid of the cable connection problem. We note that most engineers spend a lot of time in application development but get unpleasant results. In this case, the Nextion editor can use button, text, progress bar, slider, dashboard, etc. to enrich your interface design. There are such bulk components. The drag and drop function saves you less time in programming; this will reduce the development workload by 99%. With the help of this WYSIWYG editor, GUI design is part of the cake.

NX4832T035 is powerful 3.5 inch HMI, member of Nextion family. Features include: 3.5 inch TFT 480x320 resistive touch screen, 16M Flash, 3.5KByte RAM, 65k colors.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results. In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

NX2432T024 is a powerful 2.4"" HMI, which is member of Nextion family. Features include: a 2.4" TFT 320 x 240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.

It really seems to me that Nextion have the idea but not the communication skills. Although it seems to be a very useful tool, so many videographers have given it poor reviews citing poor, and ironic in the extreme, flow of logic on the website. Experienced makers having great difficulty figuring out how to do this, that and the other. As people have said here that their Nextions have died, I suspect it is a voltage problem (low or high). There is a highlighted warning about this online and this is about the only clear communication I have seen.

An example is the terible flickering gauge if you try to put the nedle over an image. Only answer is that it can be done better, but -> pay for support (oh you can do it in an oldschool way of having a hell lot of images and replace them by index... its a bit like the things 4d systems do with their hmi displays automatically...)