nextion hmi tft lcd arduino in stock

Nextion is a Human Machine Interface （HMI） solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development.

Using the Nextion Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider, etc.) and ASCII text-based instructions for coding how components interact on the display side.

Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions.

The 7" Nextion HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) display module solution that provides a control and visualisation interface for any Raspberry Pi and Arduino kits. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube, and, it is best intelligent display module on the market.

The 7" Nextion HMI LCD Touch Display is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Check out our Nanomesher HMI board with Nextion Board (Esp8266 controller board + Nextion HMI Display): http://nanomesher.com/store/Wireless-HMI-c23812280Pl...

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube. Available from 2.4″ to 7″ models, Nextion provides an analog touch screen operator interface with programmable function buttons, gauges, progress bars…etc., Nextion is an interface solution designed to complement your application needs.

Nextion Display has so many goods, you may not have a thorough understanding for it. In following blog series, I will give a comprehensive introduction for Nextion. If you are a green hand, these blogs are just the things to help you get started.

There are 6 sizes of Nextion available for your selection: 2.4″, 2.8″, 3.2″, 4.3″, 5.0″ and 7.0″. Users can see the overall detailed parameters from the below table:

Nextion TFT display uses only one serial port to do communication which helps users get rid of the wiring trouble. We notice that most engineers spend a lot of time in application development but get unsatisfactory results. In this case, Nextion editor has provided mass components, such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that users will spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

Nextion display is just the choice to solve your programming problems with the minimum of time and effort. Nextion is a better solution than ever, as users can see its competitive edges as below, not to mention its good price:

3. Objective-oriented controlling method. Nextion supports the commands not only to draw points or lines, but also to control most attributes of the components and materials.

4. Users can control the objects in a demo through serial port commands by external MCU even the demo has already been downloaded and demonstrated on Nextion screen.

Users might get a headache on which size to choose. But we have prepared you very detailed products specification that covering every model of Nextion Display. Have a look, you will know which one to choose according to your project requirements.

Nextion displays include either a resistive touch panel (RTP) or capacitive touch panel (CTP) and provide an easy way to create a touch screen interface, or human machine interface (HMI) for your project. The displays require a spare serial port to communicate with them. To get the best from them requires an understanding of how to drive them, and what works and doesn"t work. The advice here is based on my work with multiple projects using Nextion displays with both PIC and Arduino hosts. I don"t claim the ideas here are the best way or the only way to control one with an Arduino, just what I have found to work well in my projects. The sample code has been written by me and tested on an Elegoo Mega2560, and you are free to use it, modify or improve as much as you like. My methods and the examples shown here do not use any libraries as I never found them necessary, the displays are easy enough to drive without a library.

If you prefer to use a library have a look at Easy Nextion Library by Seithan, his methods are different to mine, choose which works best for you (I cannot help you with Seithan"s methods).

The displays have their own instruction set which can be found here.The instructions provide the means to control the displays either through messages sent to the serial port or from using the touch screen. This tutorial and sample code uses some of the Nextion instructions and assumes you have made yourself familiar with them from the Nextion web site.

I have used the basic 4.3" RTP version (NX4827T043) and the enhanced 7" CPT version (NX8048K070) with a WeMos M0, MKR WiFi 1010, Nano Every and Elegoo Mega2560 without problems. There are problems using one with an ESP8266, see "using Nextion displays with Arduino part 4" further down this tutorial. If you have a Uno then you could try John Harrison"s SerialWing, which allows the single serial port on the Uno to be shared with the display, and provides a separate serial port to configure the display. I have not tried other versions or other Arduinos. As the only requirement is a spare serial port on the Arduino to connect the display to, I would expect that any Arduino with a spare serial port would work with any Nextion display, but I"ve not tried combinations other than those mentioned here.

Note, Arduinios use one serial port for communication with your PC, do not use this serial port for connection to your Nextion display, use a spare one.

The displays run off 5v. All the ones I have output 3.3v on their serial transmit (blue wire). I have not had any problems using them with a WeMos M0 at 3.3v, an Elegoo Mega2560 at 5V or a PIC running on 5v. However, please check the voltage on the display transmit (blue) wire is not higher than maximum voltage your Arduino can tolerate.

To connect a Nextion to an Arduino you need one free serial port on the Arduino. Connect the TX from the Arduino to the yellow wire and the RX to the Arduino to the blue wire. You will also need 0v to the black wire and +5v to the red wire. The current drawn by the display depends on the model and how bright the back light is. The 7" CPT display NX8048K070 requires up to 550mA, the smaller ones less. The 4.3" NX4827T043 used for this tutorial draws 235mA. In my experience they generate quite a bit of noise on the supply and, although not essential, I recommend a 470μF (or larger) capacitor across the supply soldered to the connector on the back (see reply #68 for more about this).

This demonstration was created for the basic 4.3" RTP version, NX4827T043. You can adapt my configuration for a different display using the Nextion editor.

Open the attached file "Arduino Nextion demo 43V1.HMI" with the Nextion editor. If you are using a smaller display move the position of any objects that are outside the display area of the smaller display by changing X and Y for each object to a value that puts the object inside the boundaries of your display. Once you have done this select DEVICE ID from the menu and select your display from the list. If you have a bigger display you don"t need to move anything around, just select the correct device ID.