how much does an lcd screen cost factory

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Factors that may influence the price of a certain type of LCD include: screen size, viewing angle, maximum brightness, color display,resolution and frame rate.

Screen size: larger size display more, and larger size cost more, these’re common sense. For example, in last year’s iPhone 8P which used a 5.5-inch LCD screen, the display (including touchscreen) cost 52.5 dollars, while a 43-inch LCD TV cost 128 dollars.

Viewing angle: it’s the maximum angle at which a display can be viewed with acceptable visual performance. It’s measured from one direction to the opposite, giving a maximum of 180° for a flat, one-sided screen. Early LCDs had strikingly narrow viewing angles, for now most of the manufacturers have improved them to more than 160°.

Maximum brightness: usually determined by backlight system, till recently a method raises this parameter significantly by adding white color into color pixels. It’s a critical factor in mobile devices since we need to use them outdoor and even under sunlight, a situation that requires at least600 nits brightness.

Color display: in early or simple LCDs, only two or very few colors can be displayed. As the technology advances, TFT LCD can display up to 65536 colors.

Resolution: a critical parameter in display industry. It’s often quoted as width × height, with the units in pixels, e.g. “1920 × 1080” means width is 1920 pixels and the height is 1080 pixels. Adding area into count, resolution can be provided in PPI (pixels per inch). Higher resolution brings clearer image given the same screen size.

Frame rate: is the frequency at which consecutive images called frames appear on a display. In early stage it’s usually 30 Hz, and now it’s 60 Hz or a higher 144 Hz. Higher frame rate means better fluency.

As the diagram shows above, LCD module covers the most part of the cost of a LCD TV. Within LCD module, there’re still many components. In the following diagram we’ll show you the price breakdown of these components.

The third quarter in the year is usually the demand season of LCD module, as a result the price will be the highest. However, situation varies in different market.

Due to the massive investment and low cost of Chinese mainland manufacturer, the capacity of LCD module for TVs increases significantly, so the price of these modules stay pretty low for the past year.

In another aspect, technology innovations keep push the price of high-end LCD to a higher level. For many users that are planning to replace their old TVs, these high-end LCDs are tempting choices.

Actually, though LCD screen has many advantages, its average price is keep decreasing in the past years. New technology brings lower cost is one reason, a strong competitor called OLED is another.

Main difference between OLED and LCD is OLED can give out light itself, that is to say OLED screen can run at a lower load compared to LCD screen, at least it doesn’t need a backlight system.

Considering the principles of display technology, OLED definitely will be the better choice, it can be thinner, flexible, less power consuming and cheaper. But for now, OLED still has many disadvantages like short lifespan, image retentionandnot so balanced color, as its technology is quite immature.

Note: We do not own the images used in this post. Feel free to contact us if they belong to you, and we’ll take them down as quickly as we possibly can.

An LCD screen is purchased to be used in the manufacturing of a digital watch. The standard price for the LCD screen used is $40.00. During the month of February, 3,400 screens were purchased and used. The materials price variance was $6,000 unfavorable. The standard number of screens allowed for the actual number of watches manufactured during the period was 25,000 screens. The actual purchase price of each LCD screen would be closest to

According to an analysis done by IHS Technology, AMOLED screen production cost is now lower than that of LCD screens. Production costs in the first quarter of the year for a 5" 1080p display amount to $14.30 for an AMOLED panel compared to $14.60 for an LCD one.

However, it"s yet to see if this trend will keep on. In Q4 2015, an AMOLED panel cost $17.10 to make, while an LCD one was cheaper at $15.70. IHS notes that the numbers apply for the production cost of a LTPS LCD (Low Temperature Poly-Silicon Liquid Crystal Display), which is the most efficient type of TFT LCD.

If your car or truck factory radio LCD with touchscreen monitor needs replaced then we provide some of the best replacement car touch LCD screen replacement parts available on the market today. As is Factory Radio Parts standard: all of our car touchscreen repair kits are developed for both ease of use and functionality – so you can get your tunes blasting again in no time!

Car touchscreen damaged? Car radio or car DVD player not working? Let us provide you with 8.4” touchscreen parts, VP3 and VP4 radio replacement touch screens, MyFord touch sync 2 radio screens, RB5 RE2 radio replacement screens from Uconnect, 439 RBZ, 430N and 730N touch screen repairs and 7 inch screens. We supply big names like Ford Lincoln Clarion Navigation replacement parts, Toyota Tundra Panasonic touch screen fixes, RAM Truck, Chevrolet, Cadillac and more!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

(2 November, 2017) – A major decrease in manufacturing cost gap between organic light-emitting diode (OLED) display and liquid crystal display (LCD) panel is expected to support the expansion of OLED TVs, according to new analysis from

analysis estimates that the total manufacturing cost of a 55-inch OLED ultra-high definition (UHD) TV panel -- at the larger end for OLED TVs -- stood at $582 per unit in the second quarter of 2017, a 55 percent drop from when it was first introduced in the first quarter of 2015. The cost is expected to decline further to $242 by the first quarter of 2021, IHS Markit said.

The manufacturing cost of a 55-inch OLED UHD TV panel has narrowed to 2.5 times that of an LCD TV panel with the same specifications, compared to 4.3 times back in the first quarter of 2015.

“Historically, a new technology takes off when the cost gap between a dominant technology and a new technology gets narrower,” said Jimmy Kim, principal analyst for display materials at IHS Markit. “The narrower gap in the manufacturing cost between the OLED and LCD panel will help the expansion of OLED TVs.”

However, it is not just the material that determines the cost gap. In fact, when the 55-inch UHD OLED TV panel costs were 2.5 times more than LCD TV panel, the gap in the material costs was just 1.7 times. Factors other than direct material costs, such as production yield, utilization rate, depreciation expenses and substrate size, do actually matter, IHS Markit said.

The total manufacturing cost difference will be reduced to 1.8 times from the current 2.5 times, when the yield is increased to a level similar to that of LCD panels. “However, due to the depreciation cost of OLED, there are limitations in cost reduction from just improving yield,” Kim said. “When the depreciation is completed, a 31 percent reduction in cost can be expected from now.”

by IHS Markit provides more detailed cost analysis of OLED panels, including details of boards, arrays, luminescent materials, encapsulants and direct materials such as driver ICs. The report also covers overheads such as occupancy rate, selling, general and depreciation costs. In addition, this report analyzes OLED panels in a wide range of sizes and applications.

IHS Markit (Nasdaq: INFO) is a world leader in critical information, analytics and solutions for the major industries and markets that drive economies worldwide. The company delivers next-generation information, analytics and solutions to customers in business, finance and government, improving their operational efficiency and providing deep insights that lead to well-informed, confident decisions. IHS Markit has more than 50,000 key business and government customers, including 85 percent of the Fortune Global 500 and the world’s leading financial institutions. Headquartered in London, IHS Markit is committed to sustainable, profitable growth.

IHS Markit is a registered trademark of IHS Markit Ltd and/or its affiliates. All other company and product names may be trademarks of their respective owners © 2017 IHS Markit Ltd. All rights reserved.

Broken screen replacement service is provided from thousands of repairs stores and phone parts wholesalers worldwide, iPhone of which are mostly engaged in. So how to purchase reliable LCD screens among so many quality grades from China suppliers? Let me firstly elaborate on the quality grades of the iPhone LCD digitizer assembly that most repair stores and traders used to replace the broken ones.

According to the investigation, 90% of the Chinese iPhone LCD screen suppliers are found selling third-party manufactured screens and seldom sell genuine original LCD screens. Therefore, if your phone screen is broken, there would be a high chance for your screen to be replaced with a non-original one. Why? Maybe the cost and quality are relatively competitive, so why not?

As known, Foxconn is authorized to assemble iPhone, so there are some original iPhone LCD screens leaked from the assemble factory. And there are brought out from the factory for replacement. However the price is definitely high and still, some people care more about the quality of the screen than how much they cost, so for this group of customers, the Original Quality of LCD digitizer assemblies are preferred.

For some LCD digitizers, the LCDs are still working while the front glasses are broken, which can be recycled. Some factories recycled these broken screens by removing the broken front glass and attach a new one, then the LCD digitizer assembly would be new again, which is what called refurbished. Brand new original LCD screens are limited, and the refurbished ones can replenish the shortage of the new original LCD digitizer assemblies, for their quality would be more stable than the third-party manufactured.

Some Chinese factories purchase the original single LCD display, not compete LCD screen from the original factory, and then attach high copy front glass, backlight, etc, materials into a complete LCD screen, which quality is not stable and the display color is slightly different from the ones with high copy backlight. Well, their price would be cheaper and loved by many repair shops and wholesalers.

Under the shortage of original LCD screens, many Chinese factories begin to produce the high copy LCD screen. The stock and supply are getting less and less since about 2015, which leads the price goes higher and higher. Therefore the Chinese manufacturer starts to produce LCD screens with high copy raw materials. With competitive prices and good quality that meet most iPhone users’ needs, they are also popular among many wholesalers and repair shops.

With the premium quality of LCD and OLED screens tested strictly, we’ve helped many clients enlarge their markets worldwide. If you wholesale the LCD digitizer assembly or retail them in your repair shop, more information and sample are supported for your reference, please do not hesitate to contact us or leave your comment to discuss more.

Broken screen replacement service is provided from thousands of repairs stores and phone parts wholesalers worldwide, iPhone of which are mostly engaged in. So how to purchase reliable LCD screens among so many quality grades from China suppliers? Let me firstly elaborate on the quality grades of the iPhone LCD digitizer assembly that most repair stores and traders used to replace the broken ones.

According to the investigation, 90% of the Chinese iPhone LCD screen suppliers are found selling third-party manufactured screens and seldom sell genuine original LCD screens. Therefore, if your phone screen is broken, there would be a high chance for your screen to be replaced with a non-original one. Why? Maybe the cost and quality are relatively competitive, so why not?

As known, Foxconn is authorized to assemble iPhone, so there are some original iPhone LCD screens leaked from the assemble factory. And there are brought out from the factory for replacement. However the price is definitely high and still, some people care more about the quality of the screen than how much they cost, so for this group of customers, the Original Quality of LCD digitizer assemblies are preferred.

For some LCD digitizers, the LCDs are still working while the front glasses are broken, which can be recycled. Some factories recycled these broken screens by removing the broken front glass and attach a new one, then the LCD digitizer assembly would be new again, which is what called refurbished. Brand new original LCD screens are limited, and the refurbished ones can replenish the shortage of the new original LCD digitizer assemblies, for their quality would be more stable than the third-party manufactured.

Some Chinese factories purchase the original single LCD display, not compete LCD screen from the original factory, and then attach high copy front glass, backlight, etc, materials into a complete LCD screen, which quality is not stable and the display color is slightly different from the ones with high copy backlight. Well, their price would be cheaper and loved by many repair shops and wholesalers.

Under the shortage of original LCD screens, many Chinese factories begin to produce the high copy LCD screen. The stock and supply are getting less and less since about 2015, which leads the price goes higher and higher. Therefore the Chinese manufacturer starts to produce LCD screens with high copy raw materials. With competitive prices and good quality that meet most iPhone users’ needs, they are also popular among many wholesalers and repair shops.

With the premium quality of LCD and OLED screens tested strictly, we’ve helped many clients enlarge their markets worldwide. If you wholesale the LCD digitizer assembly or retail them in your repair shop, more information and sample are supported for your reference, please do not hesitate to contact us or leave your comment to discuss more.

Your product is eligible for a battery replacement at no additional cost if you have AppleCare+ and your product"s battery holds less than 80 percent of its original capacity.

Use our “Get an Estimate” tool to review potential costs if you get service directly from Apple. If you go to another service provider, they can set their own fees, so ask them for an estimate. For service covered by AppleCare+, your fee per incident will be the same regardless of which service provider you choose. We"ll inspect your product when we receive it. If additional damage is found, you could pay an additional fee.

The current out-of-warranty battery service fee will apply until the end of February 2023. Effective March 1, 2023, the out-of-warranty battery service fee will be increased by $ 20 for all iPhone models prior to iPhone 14.

Your country or region offers AppleCare+ for this product. AppleCare+ includes battery service coverage, which means your battery can be replaced at no charge if we test your product and its battery retains less than 80% of its original capacity.

AppleCare+ also provides coverage for accidental damage from handling, and each incident is subject to a service fee. Your AppleCare+ also offers Express Replacement Service.

The Apple Limited Warranty covers your iPhone and the Apple-branded accessories that come in the box with your product against manufacturing issues for one year from the date you bought them. Apple-branded accessories purchased separately are covered by the Apple Limited Warranty for Accessories. This includes adapters, spare cables, wireless chargers, or cases.

Depending on the issue, you might also have coverage with AppleCare+. Terms and Conditions apply, including fees. Feature availability and options may vary by country or region.

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan, whichever is longer. This is in addition to your rights provided by consumer law.

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

Vicpas provide lcd display screen of worldwide brand, such as Hitach, Mitsubishi, sharp, NEC, Kyocera, BOE, ALPS. there also have many special lcd screen display for siemens, lcd display for AB Allen bradlay, lcd display for B&R powerpanel, lcd display for Beckhoff, lcd display for proface, lcd display for Schneider, lcd display for Kuka, lcd display for ABB, lcd display for KEBA, lcd display for YASKAWA, lcd display for KAWASAKI, lcd display for FUJI Hakko, lcd display for Beijer, lcd display for Bosch, lcd display for Cutler-Hammar, lcd display for Delta, lcd display for Hitech, lcd display for eview, weinview, weintech, lcd display for Eaton Microinnovation, lcd display for ESA, lcd display for Uniop, lcd display for EZ automation, lcd display for Fujistu, lcd display for keyence, lcd display for lenze, lcd display for lauer, lcd display for IDEC, lcd display for KOYO, lcd display for Omron, lcd display for Panasonic, lcd display for Parker, lcd display for Red lion.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

By continuing to use AliExpress you accept our use of cookies (view more on our Privacy Policy). You can adjust your Cookie Preferences at the bottom of this page.

Pixel phones have support options for in-warranty and out-of-warranty damage. The availability of mail-in and walk-in options depends on your phone"s warranty status and your location.

Important:As part of our commitment to sustainability, we may remove paper warranty from the device packaging of Pixel 7 and Pixel 7 Pro phones. You can check the model and region warranty during phone setup. This info is available on your phone anytime, even if you also received a paper warranty. To find the warranty, under “Settings,” tap About phone

Walk-in: Repairs can often be completed same-day. Check with your nearest repair location for the exact time. Learn more about authorized service providers.

Important:These steps are only applicable for users in Canada, France, Germany, Ireland, Italy, Spain, the United Kingdom, and the United States. For users in other countries, contact Google support to check your repair options.

Before you bring your phone in for repairs, back up data, remove the SIM card, and factory reset your phone. A factory reset deletes all data saved on your phone. If you can"t factory reset your phone, log out of your Google Account on the phone:

If you can"t turn on your phone to reset it or your phone isn"t factory reset when you bring it to a repair partner, they"ll reset it for you. Remember to keep your SIM card.

During your visit, the partner will check the warranty status of your phone, inspect it to confirm the damage reported, and give you the cost of the repair. Most repairs can be completed same-day.

If damage is found during inspection that increases the repair cost, the partner will reach out to you to approve the new cost before the repair starts. Partial repairs aren"t available.

For out-of-warranty devices or damage types, you"ll find the estimated repair cost on the last page before you confirm the purchase and create the repair order.

Your own packaging: Use the repair order email to print out the attached shipping label, the Return Merchandise Authorization (RMA) slip, and battery safety label (in the US) to ship the phone.

If you choose this option, you’re responsible for any damage that might occur to your phone in shipment. Before you mail your phone, make sure to pack it securely. As packaging can differ from customer to customer and there"s a risk that the phone can be damaged in transit, after a successful repair, the repair center will use certain sturdy boxes to ship your phone.

Prepaid packaging: Once you place your repair order, the prepaid packaging takes 1–2 business days to arrive and contains padding to keep the phone secure. Print out the RMA slip and shipping label you received in the instruction email to ship the phone.

Before you send or bring your phone for repairs, back up your phone, remove the SIM card, then factory reset your phone. A factory reset deletes all data saved on your phone. If you can"t factory reset your phone, log out of your Google Account on the phone:

If you can"t turn on your phone to reset it or your phone isn"t factory reset when you bring it to a repair partner, they"ll reset it for you. Remember to keep the SIM card with you before you ship your phone.

If we find other damage that wasn"t in the original order and the repair cost increases, we"ll ask you to approve the new cost before the start of the repair.

If you don"t respond within 10 days or you reject the updated order, your repair order is canceled. Your phone is returned to you unrepaired, and you aren"t charged.

You can also get genuine Google parts from iFixit to repair a Pixel phone yourself. We recommend that only users with relevant technical experience repair their own phones.

Quick answer: It costs $29 to replace your Samsung Galaxy Z Fold 4 or Z Flip 4 screen; however, you need to be enrolled in the Samsung Care+ extended warranty to take advantage of this low cost. Out-of-warranty screen repairs will cost $349 for the Flip 4 and $499 for the Fold 4, which is slightly more than Samsung Care+ and that $29 deductible.

The Samsung Galaxy Z Fold 4 and Z Flip 4 are packed with general hardware and durability improvements compared to their predecessors. On top of those upgrades, they still lean heavily on premium display quality to stand out among the best of the best. Of course, to protect your investment, you can always use a great protective case for your Z Flip 4 or Z Fold 4, but accidents can happen even with that extra safety layer.

So what happens if that beautiful screen breaks? If a design or manufacturing issue causes a malfunction within the standard one-year warranty period, Samsung will cover the replacement. However, drops, scratches, and spills don"t fall under that umbrella.

Previously, replacing a Fold or Flip screen cost hundreds, even if you subscribed to Samsung"s extended warranty coverage. Now though, after rearranging some fees and optional insurance plans, Samsung offers a more affordable solution for accidental screen damage to the Fold 4 and Flip 4. To access this shockingly low screen replacement price of $29, you"ll have to enroll in Samsung Care+, an extended warranty program.

An out-of-warranty repair on the Flip 4 is slightly more expensive than a Care+ subscription and the $29 deductible. On a Fold 4, though, you will absolutely save money with the Samsung Care+ extended warranty instead of an out-of-warranty repair.

Samsung Care+ is an optional warranty that extends well beyond the included one-year limited warranty and covers Accidental Damage from Handling (ADH). Most limited warranties don"t cover ADH. In other words, if you drop your phone and crack the screen without additional coverage from Samsung, the replacement cost is entirely on you. Up to the third-gen Fold and Flip, these out-of-warranty costs were sky-high, easily leading to total repair bills of $400 or more.

Samsung hasn"t yet released how much out-of-warranty screen replacement will cost for the new foldables. When it does, check back, and we"ll make sure to lay out the fees. For now, though, Samsung wasted no time offering its newly laid out Care+ package. For $11 per month, Samsung guarantees even its newest and most expensive 5G smartphones against a wide range of accidental damage. Previous generations of Samsung foldables commanded $249 for screen replacements — even with a subscription to Care+.

Again, Samsung will continue to offer free screen repair if your device is under warranty and the problem was due to a design or manufacturing issue. Those defects are rare, but they happen, and Samsung will take care of them for up to one year after purchasing the device. Then, however, you"ll need to enroll in Care+ to continue your coverage.

With just a $29 fee for replacing a premium folding display, Care+ seems like an easy decision. But it doesn"t stop at just screen repairs. For subscribers to Care+, any accidental damage from drops or spills is eligible for coverage. (And, of course, any malfunction that proves to be Samsung"s fault is covered with no deductible required.)

With the release of the fourth generation of folding phones, it makes sense that Samsung is making this kind of owner-friendly change. After all, display damage is a big deterrent to many people spending $1,000+ on a smartphone. Knowing that this relatively affordable insurance plan now covers cracked screens for next to nothing could be a big step toward pushing folding phones deeper into the mainstream.

Like most insurance plans, Care+ doesn"t cover absolutely everything. For example, you won"t receive coverage if the technicians determine the damage is due to natural disasters or intentional damage.

Also, if you damage a device by trying to hack or modify it in unintended ways, you"ll have to pay full price for repairs. Cosmetic damage that doesn"t affect performance is your responsibility, too. And if your device is lost or stolen, you only get reimbursed if you"ve signed up for the Care+ With Loss and Theft package, which is currently $7 more per month than the standard Care+ plan.

For folding phones, you"ll need the Tier 4 plan, which costs $11 per month. You can pay $239 upfront for 24 months of coverage, which is about a 9% discount vs. paying per month. Samsung currently charges $17.99 per month for accidental damage plus loss and theft coverage; it"s not a bad deal for heavy users of Samsung"s newest foldables, and it"s especially worthwhile if you plan on upgrading to the Z Fold 4.

The Galaxy Z Flip 4 isn"t your conventional small phone, with a 6.7-inch 1080p display. It"s classed as a small phone because it can fold in half and fit in any pocket, including those found in women"s jeans. The battery life might not match phones like the S22+ or S22 Ultra, but the convenience more than makes up for it.

The Galaxy Z Fold 4 is one of the best smartphones ever made, offering a phone when you need it and a tablet when you want it, this is the most flexible and productive device we"ve ever used.

The sensor assembly on the back of the display is paired to your iPhone"s logic board and must be transferred from your old display to your new one. The sensor assembly includes the flood illuminator, a part of the Face ID security feature. If it is damaged or replaced, Face ID will cease to function.

Last year, consumers bought 13.5 million flat-panel monitors, more than double the 6.4 million shipped in 2000, said Rhoda Alexander, director of monitor research at Stanford Resources-iSuppli. In 2002, 23.5 million are expected find their way to consumers and businesses, fueled in part by the cool factor and by efforts of Dell Computer, Apple Computer and others to promote the space- and energy-saving screens.

Unfortunately for the industry, growth alone doesn"t translate directly to profit. Because of excess factory capacity and price wars in 2001, many manufacturers involved in the industry had to sell their products below cost.

But that scenario is likely to change this year, and for consumers that"s not a good thing. Increasing costs of components and rising consumer demand will likely lead to sporadic shortages, fewer discounts and higher prices on select products. Continued heavy demand could lead to profits for manufacturers. Then again, profits could be eroded through intense competition and by increasing factory capacity.

"In the fourth quarter, there were lots of rebates. They will disappear," Alexander said. "We show shortages throughout 2002, particularly in the 15-inch segment."

Bruce Berkoff, executive vice president at LCD maker LG Philips LCD, said that he"s been predicting a shortage for some time and sees it as part of a cycle that consists of two-year periods of oversupply and two-year periods of shortage, causing price fluctuations. Berkoff anticipates an industrywide shortage as early as mid-2002 that will last through 2003.

The cycles are in two-year intervals mainly because that"s how long it takes to build a manufacturing factory, Berkoff said. Newer factories generally equate to higher manufacturing capacities and lower prices in the market, as well as more large monitors.

Berkoff expects prices for 15-inch LCD monitors to increase from around $200 to $300 now to up to--but not over--$500 this year. He also expects 17-inch and 18-inch displays to become more mainstream with prices ranging from $700 to $900.

Although flat-panel displays have been around for years, high prices kept them from the mainstream of the consumer market. A low-end 14-inch flat panel for a desktop computer, for instance, cost about $2,000 in 1997. A shortage of LCD glass, partly driven by growing demand for notebooks and handheld devices in the late 1990s, prompted makers to invest in glass plants in Taiwan and Korea in 1998 and 1999.

A glut followed. And by October 2000, prices were in relative freefall. Prices on 15-inch flat panels dropped $200 in six weeks. Major manufacturers, such as ViewSonic and NEC, were selling them for as low as $699.

The slide continued through 2001. During various times of the year, 15-inch flat panels, the most common size, sold for $250 to $299, including rebates. Excess supplies of glass were forcing manufacturers to sell their products, at times, to monitor makers at $5 to $30 below cost, Alexander said.

The low point came in August 2001. Since then, rising demand has allowed glassmakers to sell their products again at cost or above, Alexander said. Monitor manufacturers have also enjoyed declining prices on other components, which gives them some breathing room.

Declining prices, though, drove sales up. Other factors, of course, also helped. Flat panels take up far less space than standard cathode-ray tube monitors and are aesthetically more appealing. They also consume less energy.

"The California energy crisis, whether real or manufactured, had a tremendous impact on LCDs. I received lots of calls from government agencies asking about them," said Alexander, who added that the energy savings "for a large corporate account makes a significant difference."

Although supply still outstrips demand, the LCD glut is expected to begin to dry up and prices are likely to rise. Unlike other PC products, which only go down in price, flat panel prices have jumped occasionally in the past. "LCD is one of the few (markets) where things have actually gone up in price," said Bob O"Donnell, an analyst with IDC.

Driving the demand are notebooks, which are becoming a larger percentage of the overall PC market. Consumer electronics devices that use LCD screens, such as cell phones and handhelds, use small screens and thus haven"t affected supply very much.

Another consumer electronics product category that may affect supply in the future is televisions with LCDs. Berkoff predicts this market will reach seven million units annually by 2005.

Supply, for instance, could be fairly tight in the first part of the year, driving prices up and creating shortages. Or an industrial accident at a major Japanese glass manufacturer could crimp supply during the first quarter and thereby drive prices up.

will not be able to supply LCD glass substrate until February or March, according to reports from Asian newspapers and analysts. The company"s customers include LCD producers Fujitsu, Samsung Electronics, International Display Technology, Chi Mei Optoeletronics and HannStar Display.

At the same time, other variables exist. An expansion of LCD manufacturing facilities in Korea from Sharp, Samsung and LG Philips means that more supply is on the horizon. And like in 2000, an influx of products could depress prices. (Samsung and other LCD panel manufacturers take glass and other components and manufacture the LCD panel. The panels then get shipped to notebook or monitor makers, which can be sister subsidiaries and which incorporate the LCD panel into monitors).

LCD manufacturers are working on other types of display technology, such as organic light-emitting diode displays. But it will be at least 10 years before any of them can replace LCDs.