iphone 5c front lcd touch screen digitizer assembly price

●The installation of iPhone 5C replacement parts should be done by a qualified person. ETS is not responsible for any damage caused during installation.

NOTE: After the LCD assembly is free, if you need to replace the cracked iPhone 5C screen, now you have to remove the ear speaker assembly and front camera & sensor flex cable at the top of the LCD assembly. And remove the home button at the bottom and the LCD heat shield.

Good product for the price. But, preliminary check showed one missing screw and the camera screws were very loose. Easy fixes. Installed and fired up. Looks good. Another IPhone rescued to fight another day. Came with a screen protector and tools (nice add-ons). Appeared to be new as stated in the ebay listing. Included water damage indicators already applied (nice). Home button ribbon was not stuck all the way down (removed screw and pushed it down in postion). That is about it. Decent price and better than the last one I ordered from a different supplier. I would buy from them again. Thanks!

For sale is a replacement iPhone 5c white glass digitizer LCD assembly. This is the full front panel assembly, it includes a new glass touch screen, LCD screen, ear speaker, front facing camera and home button. Using this replacement panel, installation is extremely easy, it saves you the need to swap over each component part from your old screen to the new one. To install this part all you need to do is remove your old screen and fit the new one.

So if you have dropped your phone and cracked the screen or your LCD display has broken or damaged, this is the replacement part you need to repair your iPhone 5c. The assembly is shipped from the UK. We ship internationally for a low price. VAT is included in the price you see. This item comes with a 90 day warranty so you can buy with confidence. An 8 piece tool kit is also included.

Wholesale iPhone 5C Replacement Parts. Buy wholesale iPhone 5C Parts and iPhone 5C Screen Replacements. If you can"t find a item, please email Questions@RepairPartsUSA.com

The glass and the LCD cannot be replaced individually as they are inseparable. Don"t believe the other companies that try to sell you them separately.

This part does NOT come with the home button, front camera assembly, earpiece speaker or the LCD shield plate. You"ll need to transfer these parts from your old display assembly to your new part.

This guide misses a few things: after removing the old display, you will need to remove the silver backing/shield, the home button and the camera (be very careful when pulling the copper tape from the silver panel so not to tear it.) You will then need to place these in the new display. This is another 9? screws or so. I think the iPhone 5 page has this guide (it"s pretty much the same thing.)

On a further note, be VERY careful when plugging the new screen to the mainboard - the FPC connector pins can BEND and BREAK if you force the connector. Broken pins require very careful hot air/reflow soldering of the mainboard and a new FPC connector: not recommended for novices!

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.

Replace a cracked or scratched front glass panel or malfunctioning LCD display on your phone. A new screen and digitizer assembly will renew the appearance of your front panel, restore touch function, and eliminate the dead pixels or flickering on an aging display.