lc-32lb370u replacement lcd panel manufacturer

A T-con board — short for “timing control board” or “timing controller” — is found in LED and LCD TVs. This board converts the video signal from the main board and sends it directly to the screen to display the signal in the correct order and at the correct spot on the screen.

*This is NOT an original Sharp Remote Control.* It is a custom replacement remote made by Redi-Remote* This remote control is specifically designed to be compatible with the following models of Sharp units: LC-RC1-16, LC-32LB370U, LC-32LB480U, LC-40LB480U, LC-50LB370U, 398GR10BESP08J. *If you have any concerns with the remote after purchase, please contact me directly*. There is a cover over the lower half of the remote. This will slide down to reveal the lower half, model specific functions.

Originally supplied with Sharp TV LC-32LB370 LC32LB370 LC-32LB370U LC32LB370U LC-32LB480U LC32LB480U LC-40LB480U LC40LB480U LC-50LB370 LC50LB370 LC-50LB370U LC50LB370U

UBay LC-RC1-16 Replaced Remote for Sharp TV LC-32LB370 LC32LB370 LC-32LB370U LC32LB370U LC-32LB480U LC32LB480U LC-40LB480U LC40LB480U LC-50LB370 LC50LB370 LC-50LB370U LC50LB370U

On the back of the LCD screen itself, there should be a a manufacturer"s name and model number stamped (it might not be Sharp but a specialist screen manufacturer). Search online using this information. You may find, if you are lucky enough to find one, that it may cost as much as a new TV. If you do not wish to go further with fixing this TV, because of this, (as you do not know if there is anything else wrong with the TV, was it powered or turned on when the screen was cracked - if so something else may have happened to it) advertising the components of your TV, e.g. the individual circuit boards etc for sale may help to offset the cost of the purchase of the TV and perhaps a new one.

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV 2 Align the TV stands with the screw holes on the bottom of the TV, then secure the stands to the TV with the four provided screws. Make sure that the arrows on the stands are pointing towards the front of the TV.

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV Notes • The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. • The mounting holes on the back of your TV take type M6 screws.

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV 9 Press or ENTER to highlight Hour, Minute, or the 15 Press to highlight Cable/Satellite Box, Cable from AM/PM field, then press adjust the option. When the wall, or Antenna, then press ENTER. you are finished, use the arrow buttons to highlight Next, •...

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV Problem Solution Problem Solution Only snow (noise) Dotted lines or • Try another channel. The station • Make sure that the antenna or appears on the stripes appear on may be experiencing problems. cable TV is connected correctly screen.

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV Problem Solution Problem Solution The Audio I cannot select • When Audio Return Channel is • The device may not support this Return the Root Menu set to Off and CEC Control is set feature. See the documentation...