tft lcd screen module ultra hd 320x480 for arduino made in china

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Tft Lcd Arduino Uno, Digital Kiosk Display, Stone Tft Display, Large Touch Screen,Latop Lcd Panel. "Making the Products of High Quality" is the eternal goal of our company. We make unremitting efforts to realize the goal of "We Will Always Keep in Pace with the Time". The product will supply to all over the world, such as Europe, America, Australia,Philippines, Swiss,Cyprus, Peru.Our product quality is one of the major concerns and has been produced to meet the customer"s standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

For this tutorial I composed three examples. The first example is distance measurement using ultrasonic sensor. The output from the sensor, or the distance is printed on the screen and using the touch screen we can select the units, either centimeters or inches.

The next example is controlling an RGB LED using these three RGB sliders. For example if we start to slide the blue slider, the LED will light up in blue and increase the light as we would go to the maximum value. So the sliders can move from 0 to 255 and with their combination we can set any color to the RGB LED,  but just keep in mind that the LED cannot represent the colors that much accurate.

The third example is a game. Actually it’s a replica of the popular Flappy Bird game for smartphones. We can play the game using the push button or even using the touch screen itself.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

As the code is a bit longer and for better understanding I will post the source code of the program in sections with description for each section. And at the end of this article I will post the complete source code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

Next we need to define the fonts that are coming with the libraries and also define some variables needed for the program. In the setup section we need to initiate the screen and the touch, define the pin modes for the connected sensor, the led and the button, and initially call the drawHomeSreen() custom function, which will draw the home screen of the program.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

Next is the distance sensor button. First we need to set the color and then using the fillRoundRect() function we will draw the rounded rectangle. Then we will set the color back to white and using the drawRoundRect() function we will draw another rounded rectangle on top of the previous one, but this one will be without a fill so the overall appearance of the button looks like it has a frame. On top of the button we will print the text using the big font and the same background color as the fill of the button. The same procedure goes for the two other buttons.

Now we need to make the buttons functional so that when we press them they would send us to the appropriate example. In the setup section we set the character ‘0’ to the currentPage variable, which will indicate that we are at the home screen. So if that’s true, and if we press on the screen this if statement would become true and using these lines here we will get the X and Y coordinates where the screen has been pressed. If that’s the area that covers the first button we will call the drawDistanceSensor() custom function which will activate the distance sensor example. Also we will set the character ‘1’ to the variable currentPage which will indicate that we are at the first example. The drawFrame() custom function is used for highlighting the button when it’s pressed. The same procedure goes for the two other buttons.

So the drawDistanceSensor() custom function needs to be called only once when the button is pressed in order to draw all the graphics of this example in similar way as we described for the home screen. However, the getDistance() custom function needs to be called repeatedly in order to print the latest results of the distance measured by the sensor.

Here’s that function which uses the ultrasonic sensor to calculate the distance and print the values with SevenSegNum font in green color, either in centimeters or inches. If you need more details how the ultrasonic sensor works you can check my particular tutorialfor that. Back in the loop section we can see what happens when we press the select unit buttons as well as the back button.

Ok next is the RGB LED Control example. If we press the second button, the drawLedControl() custom function will be called only once for drawing the graphic of that example and the setLedColor() custom function will be repeatedly called. In this function we use the touch screen to set the values of the 3 sliders from 0 to 255. With the if statements we confine the area of each slider and get the X value of the slider. So the values of the X coordinate of each slider are from 38 to 310 pixels and we need to map these values into values from 0 to 255 which will be used as a PWM signal for lighting up the LED. If you need more details how the RGB LED works you can check my particular tutorialfor that. The rest of the code in this custom function is for drawing the sliders. Back in the loop section we only have the back button which also turns off the LED when pressed.

In order the code to work and compile you will have to include an addition “.c” file in the same directory with the Arduino sketch. This file is for the third game example and it’s a bitmap of the bird. For more details how this part of the code work  you can check my particular tutorial. Here you can download that file:

In the future, we will further promote the integration of our development elements and make every effort to build a leading global supplier of the 1 3 Inch 240x240 LCD Display Module with Touch Panel, IPS Lcd Display, 3.5 inch tft lcd display.Our arduino tft touch screen has good quality and reasonable price, sincerely welcome you to purchase, we will be happy to serve you. We never give up in our career, strengthen our sense of worry and constantly break through. Based on the company"s comprehensive strength and brand, we have established long-term strategic partnership with many enterprises at home and abroad. Our products are exported to the United States, Europe and other countries. The needs of customers are the direction and goal of our company. We will do our best to provide customers with high-quality products and effective services anytime and anywhere, and accept all kinds of opinions and complaints sincerely. Our company has carried out a series of solid and effective measures such as adjusting the structure, optimizing equipment, strengthening environmental protection, improving quality, and improving services, and further promotes the corporate culture of "respecting quality as life, and treating customers as God". We rely on the continuous improvement of human resources, product power, channel power, and brand power to become the best company. We are not only committed to combining modern technology with technical traditions, but also constantly improving equipment and striving to provide customers with high-quality and efficient produc

The company has been recognized by many customers and peers in the industry. I didn"t understand it before, but after this cooperation, we found that their services and products are indeed of high

May 06, 2021 · I have this ( link) TFT-Colour-Device (driver chip: ILI9341) with a touch screen. I found that the Mcufriend-library-examples work with this shield, as long as I have it plugged...

May 06, 2021 · I have a 3.4 inch TFT display connected to arduino uno. I am using McufriendKbv library. My primary aim is to detect the touch points. But when I touch a particular position...

Dec 07, 2015 · Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center...

Samfox TFT LCD Screen Module 480x320 3.5Inch LCD Digitizer Touch Screen Panel for Arduino UNO & MEGA 2560 Board, 480x320 Pixels. GPS Module GPS NEO-M8N BDS Compass Module(3 in 1) Drone...

Aug 12, 2019 · Let’s examine the components of the Arduino LCD Touchscreen Shield. TFT LCD Display The most obvious component on the shield is the display itself. This is a TFT or Thin Film...

For as low as $4 (shipping included!), it"s possible to buy a small, sharp TFT screen that can be interfaced with an Arduino. Moreover, it can display not just text, but elaborate graphics. These...

The quality of our lcd monitor screen, 2 7 inch OLED, LCD TN Display is guaranteed to meet the standards so that each product is shipped and used without harming the environment where we live together. We"re well-known as one of the leading arduino tft touch screen manufacturers and suppliers in China. We warmly welcome you to wholesale high-grade arduino tft touch screen made in China here from our factory. All custom made products are with high quality and competitive price.

This display can be mounted on an Arduino Mega or Due. It has a fairly high resolution of 320*480 pixels and is also quite large with 3.2 inch LCD size.