tft display meaning in hindi in stock

आपके स्मार्टफोन की डिस्प्ले के बारे में आप कितना जानते हैं? डिस्प्ले के नाम जैसे कि AMOLED, OLED, LCD, TFT के बारे में आप कितना विस्तार से जानते हैं? इनके नाम बहुत छोटे हैं, लेकिन इनमें से कौन-सा बेहतर है, किस रिफ्रेश रेट के साथ आता है, रेज़ॉल्यूशन कितना है इन सब सवालों को जानकर यदि आप अपने लिए स्मार्टफोन चुनना चाहते हैं तो आपके इन सभी प्रश्नों के उत्तर मिलेंगे यहाँ।

पिछले कुछ सालों में स्मार्टफोन की डिस्प्ले काफी बेहतर हुई हैं। लेकिन प्रत्येक स्मार्टफोन डिस्प्ले के साथ जो शार्ट-फॉर्म एक संक्षिप्त नाम जुड़ता है, जैसे कि AMOLED, LCD, इत्यादि वो केवल नाम नहीं बल्कि अपने आप में एक तकनीक है। स्मार्टफोन पर लगे पैनल AMOLED, OLED, LED, LCD, IPS, TFT, LTPS, इत्यादि होते हैं। ये सभी पूर्णत: अलग होते हैं।

पहले ही इतने टाइप के पैनल मौजूद हैं, ऐसे में स्मार्टफोन निर्माता द्वारा फैंसी नामों का इस्तेमाल जैसे कि Apple द्वारा Super Retina XDR और Samsung द्वारा Dynamic AMOLED ग्राहकों के बीच भ्रम या असमंजस को और बढ़ा देता है।

डिस्प्ले के टाइप तो बहुत सारे हैं जैसे कि TFT, LTPS, AMOLED, OLED, IPS, LCD इत्यादि। लेकिन इन दिनों TFT, LTPS जैसी डिस्प्ले काफी कम हो गयीं हैं। किफ़ायती दामों पर और मिड-रेंज में आने वाले फोनों में आपको IPS LCD डिस्प्ले मिलेगी। लेकिन इन सबका विस्तार से समझें, तो मतलब क्या है ?

अगर संक्षिप्त रूप से और आसान भाषा में समझें तो दो तरह की टेक्नोलॉजी- एलसीडी (LCD) और ओलेड (OLED) बाज़ार में आ रहीं हैं। प्रत्येक में कुछ विभिन्न प्रकार और जनरेशन हैं जो बाकी के स्क्रीन टाइप शार्ट फॉर्म को बनाती हैं। इसी तरह टेलीविज़न की दुनिया में भी अलग स्क्रीन टाइप उपलब्ध हैं जैसे कि LED, QLED, miniLED – ये सब दरसअल एलसीडी (LCD) तकनीक के ही अलग अलग रूप हैं जिनमें थोड़ी विविधताएं हैं।

LCD का मतलब या फुल फॉर्म है लिक्विड क्रिस्टल डिस्प्ले (Liquid Crystal Display)। इसमें लिक्विड क्रिस्टल्स की एक श्रंखला दी जाती है जिसके पीछे एक बैकलाइट होती है। इस डिस्प्ले टाइप का हर जगह आसानी से उपलब्ध होना और कम दामों में इसका निर्माण इसे स्मार्टफोनों के लिए एक प्रचलित विकल्प या पसंद बनाता है।

स्मार्टफोनों में आपको दोनों डिस्प्ले TFT और IPS मिलती हैं। TFT का फुल फॉर्म है – Thin Film Transistor, जो LCD का ही एक बेहतर या एडवांस्ड वर्ज़न है, जो एक एक्टिव मैट्रिक्स (active matrix) का इस्तेमाल करता है। active matrix का अर्थ है कि प्रत्येक पिक्सेल एक अलग ट्रांजिस्टर और कपैसिटर से जुड़ा होता है।

TFT डिस्प्ले का सबसे बड़ा फायदा यही है कि इसके प्रोडक्शन में तुलनात्मक कम खर्च होता है और इसमें असल LCD के मुकाबले ज्यादा कॉन्ट्रास्ट मिलता है। वहीं TFT LCD में नुकसान ये है कि इन्हें रेगुलर LCD प्रकारों के मुकबाले ज्यादा एनर्जी यानि बैटरी चाहिए, इनके व्यूिंग एंगल और रंग भी इतने अच्छे नहीं होते। इन्हीं सब कारणों से बाकी डिस्प्ले विकल्पों की गिरती कीमतों के कारण अब TFT डिस्प्ले का इस्तेमाल स्मार्टफोनों में नहीं किया जाता।

TFT(Thin Film Transistor) – ये भी LCD डिस्प्ले का ही एक प्रकार है जिसमें नीचे एक पतली सेमीकंडक्टर की परत होती है जो हर एक पिक्सल पर रंगों को नियंत्रित करने का काम करता है। इसका और AMOLED में आने वाले AM यानि कि active matrix का काम लगभग एक ही है।

LTPS(Low Temperature PolySilicon) – ये भी Si (amorphous silicon) तकनीक पर आधारित TFT का ही वैरिएंट है जिसमें आपको हाई रेज़ॉल्यूशन मिलता है और ऊर्जा यानि कि पॉवर साधारणत: TFT से कम लेता है।

IGZO(Indium Gallium Zinc Oxide) – ये भी एक सेमिकंडक्टर मैटेरियल है जो डिस्प्ले के नीचे लगी फिल्म में इस्तेमाल होता है और आजकल a semiconductor material used in TFT films, which also allows higher resolutions and lower power consumption, and sees action in different types of LCD screens (TN, IPS, VA) and OLED displays

LTPO( Low Temperature Polycrystaline Oxide) – इस टेक्नोलॉजी को Apple ने डेवेलप किया है और इसे वर्तमान समय में OLED और LCD दोनों तरह की स्क्रीन में इस्तेमाल किया जाता है। इसमें LTPS और IGZO दोनों तकनीकों का इस्तेमाल मिलाकर किया जाता है और नतीजा होता है – डिस्प्ले द्वारा पॉवर का कम इस्तेमाल। ये Apple Watch 4 और Galaxy S21 Ultra में आयी है।

IPS तकनीक को In-Plane Switching तकनीक कहते हैं। IPS टेक्नोलॉजी ने सबसे पहले आयी LCD डिस्प्ले में आने वाली समस्या को दूर किया जिसमें TN तकनीक का इस्तेमाल होता था और इसमें साइड से देखने पर रंग बहुत ख़राब नज़र आते थे। ये कमी ज़्यादातर सस्ते स्मार्टफोन और टैबलेटों में नज़र आया करती थी।

PLS (Plane to Line Switching) – PLS और IPS के नाम या उनके फुल फॉर्म लगभग एक ही जैसे लगते हैं। लेकिन इसमें आश्चर्य की कोई बात नहीं है क्योंकि इनका मुख्य कार्य भी एक समान ही है। PLS टेक्नोलॉजी को Samsung Display द्वारा बनाया गया है और IPS डिस्प्ले की ही तरह इसकी विशेषता भी डिस्प्ले पर अच्छे रंग दर्शाना और बेहतर व्यूइंग एंगल दिखाना ही हैं। लेकिन इसमें OLED और LCD/VA डिस्प्ले के मुकाबले कॉन्ट्रास्ट थोड़ा कम है।

Samsung Display का कहना है कि PLS पैनलों के उत्पादन में लागत कम लगती है, ब्राइटनेस लेवल अच्छा मिलता है और प्रतियोगी कंपनी LG Display के IPS पैनलों के मुकाबले व्यूइंग एंगल भी काफी अच्छे मिलते हैं। अंतत: PLS पैनल का उपयोग किया जाए या IPS पैनल का इस्तेमाल करें, ये पूरी तरह से स्मार्टफोन निर्माताओं पर निर्भर करता है।

AMOLED की फुल फॉर्म – एक्टिव मैट्रिक्स ऑर्गेनिक लाइट एमिटिंग डायोड (Active Matrix Organic Light-Emitting Diode) है। हालांकि ये सुनने में बहुत मुश्किल नाम लग रहा होगा, लेकिन ये है नहीं। हम पहले ही TFT LCD टेक्नोलॉजी में एक्टिव मैट्रिक्स के बारे में पढ़ चुके हैं और अब रहा OLED, तो ये केवल एक पतली फिल्म वाली डिस्प्ले तकनीक है और कुछ नहीं।

OLED को- Organic Light Emitting Diode कहते हैं। एक OLED डिस्प्ले electroluminescent मैटीरियल की पतली शीट से बनी होती है, जिसका सबसे बड़ा फायदा यही है कि ये अपनी रौशनी खुद पैदा करते हैं और इन्हें बैकलाइट की ज़रुरत नहीं पड़ती, जिससे ऊर्जा या बिजली की ज़रुरत कम पड़ती है। यही OLED स्क्रीन जब स्मार्टफोन या टीवी के लिए उपयोग होती है तो इसे ज़्यादातर AMOLED डिस्प्ले के नाम से जाना जाता है।

पिक्सल डेंसिटी की बात करें तो, 2010 में iPhone 4 के लॉन्च के समय Apple का मुख्य आकर्षण यही था। इस स्मार्टफोन डिस्प्ले में कंपनी ने LCD डिस्प्ले का इस्तेमाल किया। इस LCD पैनल ((LED, TFT, और IPS) को हाई रेज़ॉल्यूशन (उस समय पर 960 X 640 पिक्सल्स) के साथ Retina Display का नाम दिया। इस फ़ोन में 3.5 इंच की डिस्प्ले थी।

उस समय पर Apple के मार्केटिंग डिपार्टमेंट ने Retina Display नाम इसलिए चुना क्योंकि कंपनी के अनुसार एक निश्चित दूरी से हमारी या किसी भी इंसान की आंखें अलग-अलग पिक्सल में फर्क नहीं कर पाती। iPhones के केस में, ये नाम तब इस्तेमाल होता था जब फ़ोन की डिस्प्ले पर 300 ppi (pixel per inch) से ज्यादा होती थी।

तब से, अन्य स्मार्टफोन बनाने वाली कंपनियों ने भी यही तरीका अपनाया और हाई रेज़ॉल्यूशन वाले पैनलों को अपनाना शुरू कर दिया। जबकि iPhone 12 Mini में 476 dpi और Sony Xperia 1 में 643 dpi मिलती है।

जब सबने हाई रेज़ॉल्यूशन के साथ डिस्प्ले लेना आरम्भ कर दिया, फिर Apple ने खुद को भीड़ में अलग करने के लिए अपने प्रीमियम स्मार्टफोनों में इस्तेमाल होने वाली OLED डिस्प्ले को “Super Retina” का नाम दे दिया। ये डिस्प्ले iPhone X और उसके बाद आने वाले फोनों में आयी है। ये डिस्प्ले हाई कॉन्ट्रास्ट रेट और डिस्प्ले पर रंगों की सटीकता के लिए जानी जाती है, और ऐसी ही स्क्रीन Samsung के S-सीरीज़ के स्मार्टफोनों में भी आप देख सकते हैं।

इसके बाद कंपनी ने iPhone 11 Pro के साथ डिस्प्ले का नया नाम भी लॉन्च किया – “Super Retina XDR”। इसमें भी वही OLED पैनल का उपयोग किया गया है, लेकिन इसे पैनल का निर्माण Samsung Display या LG Display द्वारा हुआ है। इसमें आपको 2,000,000:1 रेश्यो के साथ और भी बेहतर कॉन्ट्रास्ट लेवल और 1200 nits की ब्राइटनेस मिलते हैं और ये ख़ासकर HDR कंटेंट के लिए अनुकूल हैं।

वहीं iPhone XR और iPhone 11 के ग्राहकों को भी खुश रखने के लिए कंपनी ने इनमें आने वाले LCD पैनल को “Liquid Retina” का नाम दे दिया। बाद में यही डिस्प्ले कंपनी स्टैण्डर्ड के अनुसार बेहतर रेज़ॉल्यूशन और सही रंगों के साथ iPad Pro और iPad Air मॉडल में भी आया।

अंतरराष्ट्रीय प्रणाली या सिस्टम में Nit या कैंडेला प्रति वर्ग मीटर (candela per square meter), जलने या निकलने वाली रौशनी की तीव्रता या गहनता (intensity) को मापने की यूनिट है। अधिकतर स्मार्टफोन, टैबलेट, मॉनिटर के बारे में जब हम बात करते हैं तो ये यूनिट बताती है कि डिस्प्ले कितना ब्राइट है। इसकी वैल्यू जितनी ज्यादा होगा, डिस्प्ले पर पिछले से पड़ने वाली रौशनी की तीव्रता भी उतनी ही ज्यादा होगी।

टेलीविज़न की दुनिया में, miniLED के बारे में हम जान चुके हैं और ये फ़ीचर या तकनीक टीवी में हम देखते ही आ रहे हैं। इसमें बैकलाइट में लाइटिंग ज़ोन का नंबर बढ़ा दिया जाता है। लेकिन अब अफवाहों और कई ख़बरों के अनुसार स्मार्टफोनों और स्मार्टवॉच में भी कंपनियां microLED टेक्नोलॉजी जल्दी ही लेकर आ सकती हैं। ये टेक्नोलॉजी या पैनल LCD/LED से काफी अलग है क्योंकि ये OLED डिस्प्ले की तरह ही बारीकियों के साथ अच्छी पिक्चर क्वॉलिटी देती है।

microLED डिस्प्ले में हर एक सब-पिक्सल में एक अलग रौशनी देने वाला डायोड होता है – अधिकतर ये एक लाल, हरे और नीले डायोड का एक सेट होता है जो एक डॉट के लिए होता है । माना जा रहा है कि microLED में इस बार किसी तरह की अजैविक (inorganic) मैटेरियल का इस्तेमाल होगा जैसे कि gallium nitride (GaN)।

खुद अपनी रौशनी छोड़ने वाला पिक्सल यानि कि self-emitting light जैसी तकनीक अपनाने के साथ, microLED डिस्प्ले में भी बैकलाइट की ज़रूरत नहीं होती। इसमें भी आपको OLED जैसे ही हाई कॉन्ट्रास्ट के साथ पिक्चर देखने को मिलेंगी और साथ ही इसमें ऑर्गेनिक डायोड की तरह स्क्रीन बर्न-इन जैसी समस्याओं का डर भी नहीं है।

वहीँ इनकी ख़ामियों की बात करें तो, इनको बनाने में काफी ज़्यादा लागत लगती है और कॉम्पोनेन्ट की पूर्ती करने वाली कंपनियां भी सीमित ही हैं। इनमें Samsung Display, LG Display और तीसरे नंबर पर चीन की इलेक्ट्रॉनिक्स कंपनी BOE और कुछ एक जो OLED की मांग को पूरा करते हैं। जबकि LCD पैनल बनाने वाली काफी कम्पनियां हैं।

इसके अलावा एक और बात जो हम यहां जोड़ना चाहते हैं, समय के साथ OLED स्क्रीन के ऑर्गेनिक डायोड अपनी चमक या कहें कि योग्यता खो देते हैं और ये तब होता है जब एक ही तस्वीर ज्यादा समय तक डिस्प्ले होती है। इसे कपनियां  “burn-in” का नाम देती हैं।

A thin-film-transistor liquid-crystal display (TFT LCD) is a variant of a liquid-crystal display that uses thin-film-transistor technologyactive matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven (i.e. with segments directly connected to electronics outside the LCD) LCDs with a few segments.

In February 1957, John Wallmark of RCA filed a patent for a thin film MOSFET. Paul K. Weimer, also of RCA implemented Wallmark"s ideas and developed the thin-film transistor (TFT) in 1962, a type of MOSFET distinct from the standard bulk MOSFET. It was made with thin films of cadmium selenide and cadmium sulfide. The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968. In 1971, Lechner, F. J. Marlowe, E. O. Nester and J. Tults demonstrated a 2-by-18 matrix display driven by a hybrid circuit using the dynamic scattering mode of LCDs.T. Peter Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories developed a CdSe (cadmium selenide) TFT, which they used to demonstrate the first CdSe thin-film-transistor liquid-crystal display (TFT LCD).active-matrix liquid-crystal display (AM LCD) using CdSe TFTs in 1974, and then Brody coined the term "active matrix" in 1975.high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.

The liquid crystal displays used in calculators and other devices with similarly simple displays have direct-driven image elements, and therefore a voltage can be easily applied across just one segment of these types of displays without interfering with the other segments. This would be impractical for a large display, because it would have a large number of (color) picture elements (pixels), and thus it would require millions of connections, both top and bottom for each one of the three colors (red, green and blue) of every pixel. To avoid this issue, the pixels are addressed in rows and columns, reducing the connection count from millions down to thousands. The column and row wires attach to transistor switches, one for each pixel. The one-way current passing characteristic of the transistor prevents the charge that is being applied to each pixel from being drained between refreshes to a display"s image. Each pixel is a small capacitor with a layer of insulating liquid crystal sandwiched between transparent conductive ITO layers.

The circuit layout process of a TFT-LCD is very similar to that of semiconductor products. However, rather than fabricating the transistors from silicon, that is formed into a crystalline silicon wafer, they are made from a thin film of amorphous silicon that is deposited on a glass panel. The silicon layer for TFT-LCDs is typically deposited using the PECVD process.

Polycrystalline silicon is sometimes used in displays requiring higher TFT performance. Examples include small high-resolution displays such as those found in projectors or viewfinders. Amorphous silicon-based TFTs are by far the most common, due to their lower production cost, whereas polycrystalline silicon TFTs are more costly and much more difficult to produce.

The twisted nematic display is one of the oldest and frequently cheapest kind of LCD display technologies available. TN displays benefit from fast pixel response times and less smearing than other LCD display technology, but suffer from poor color reproduction and limited viewing angles, especially in the vertical direction. Colors will shift, potentially to the point of completely inverting, when viewed at an angle that is not perpendicular to the display. Modern, high end consumer products have developed methods to overcome the technology"s shortcomings, such as RTC (Response Time Compensation / Overdrive) technologies. Modern TN displays can look significantly better than older TN displays from decades earlier, but overall TN has inferior viewing angles and poor color in comparison to other technology.

Most TN panels can represent colors using only six bits per RGB channel, or 18 bit in total, and are unable to display the 16.7 million color shades (24-bit truecolor) that are available using 24-bit color. Instead, these panels display interpolated 24-bit color using a dithering method that combines adjacent pixels to simulate the desired shade. They can also use a form of temporal dithering called Frame Rate Control (FRC), which cycles between different shades with each new frame to simulate an intermediate shade. Such 18 bit panels with dithering are sometimes advertised as having "16.2 million colors". These color simulation methods are noticeable to many people and highly bothersome to some.gamut (often referred to as a percentage of the NTSC 1953 color gamut) are also due to backlighting technology. It is not uncommon for older displays to range from 10% to 26% of the NTSC color gamut, whereas other kind of displays, utilizing more complicated CCFL or LED phosphor formulations or RGB LED backlights, may extend past 100% of the NTSC color gamut, a difference quite perceivable by the human eye.

The transmittance of a pixel of an LCD panel typically does not change linearly with the applied voltage,sRGB standard for computer monitors requires a specific nonlinear dependence of the amount of emitted light as a function of the RGB value.

In-plane switching was developed by Hitachi Ltd. in 1996 to improve on the poor viewing angle and the poor color reproduction of TN panels at that time.

Initial iterations of IPS technology were characterised by slow response time and a low contrast ratio but later revisions have made marked improvements to these shortcomings. Because of its wide viewing angle and accurate color reproduction (with almost no off-angle color shift), IPS is widely employed in high-end monitors aimed at professional graphic artists, although with the recent fall in price it has been seen in the mainstream market as well. IPS technology was sold to Panasonic by Hitachi.

Most panels also support true 8-bit per channel color. These improvements came at the cost of a higher response time, initially about 50 ms. IPS panels were also extremely expensive.

IPS has since been superseded by S-IPS (Super-IPS, Hitachi Ltd. in 1998), which has all the benefits of IPS technology with the addition of improved pixel refresh timing.

In 2004, Hydis Technologies Co., Ltd licensed its AFFS patent to Japan"s Hitachi Displays. Hitachi is using AFFS to manufacture high end panels in their product line. In 2006, Hydis also licensed its AFFS to Sanyo Epson Imaging Devices Corporation.

It achieved pixel response which was fast for its time, wide viewing angles, and high contrast at the cost of brightness and color reproduction.Response Time Compensation) technologies.

Less expensive PVA panels often use dithering and FRC, whereas super-PVA (S-PVA) panels all use at least 8 bits per color component and do not use color simulation methods.BRAVIA LCD TVs offer 10-bit and xvYCC color support, for example, the Bravia X4500 series. S-PVA also offers fast response times using modern RTC technologies.

When the field is on, the liquid crystal molecules start to tilt towards the center of the sub-pixels because of the electric field; as a result, a continuous pinwheel alignment (CPA) is formed; the azimuthal angle rotates 360 degrees continuously resulting in an excellent viewing angle. The ASV mode is also called CPA mode.

A technology developed by Samsung is Super PLS, which bears similarities to IPS panels, has wider viewing angles, better image quality, increased brightness, and lower production costs. PLS technology debuted in the PC display market with the release of the Samsung S27A850 and S24A850 monitors in September 2011.

TFT dual-transistor pixel or cell technology is a reflective-display technology for use in very-low-power-consumption applications such as electronic shelf labels (ESL), digital watches, or metering. DTP involves adding a secondary transistor gate in the single TFT cell to maintain the display of a pixel during a period of 1s without loss of image or without degrading the TFT transistors over time. By slowing the refresh rate of the standard frequency from 60 Hz to 1 Hz, DTP claims to increase the power efficiency by multiple orders of magnitude.

Due to the very high cost of building TFT factories, there are few major OEM panel vendors for large display panels. The glass panel suppliers are as follows:

External consumer display devices like a TFT LCD feature one or more analog VGA, DVI, HDMI, or DisplayPort interface, with many featuring a selection of these interfaces. Inside external display devices there is a controller board that will convert the video signal using color mapping and image scaling usually employing the discrete cosine transform (DCT) in order to convert any video source like CVBS, VGA, DVI, HDMI, etc. into digital RGB at the native resolution of the display panel. In a laptop the graphics chip will directly produce a signal suitable for connection to the built-in TFT display. A control mechanism for the backlight is usually included on the same controller board.

The low level interface of STN, DSTN, or TFT display panels use either single ended TTL 5 V signal for older displays or TTL 3.3 V for slightly newer displays that transmits the pixel clock, horizontal sync, vertical sync, digital red, digital green, digital blue in parallel. Some models (for example the AT070TN92) also feature input/display enable, horizontal scan direction and vertical scan direction signals.

New and large (>15") TFT displays often use LVDS signaling that transmits the same contents as the parallel interface (Hsync, Vsync, RGB) but will put control and RGB bits into a number of serial transmission lines synchronized to a clock whose rate is equal to the pixel rate. LVDS transmits seven bits per clock per data line, with six bits being data and one bit used to signal if the other six bits need to be inverted in order to maintain DC balance. Low-cost TFT displays often have three data lines and therefore only directly support 18 bits per pixel. Upscale displays have four or five data lines to support 24 bits per pixel (truecolor) or 30 bits per pixel respectively. Panel manufacturers are slowly replacing LVDS with Internal DisplayPort and Embedded DisplayPort, which allow sixfold reduction of the number of differential pairs.

Backlight intensity is usually controlled by varying a few volts DC, or generating a PWM signal, or adjusting a potentiometer or simply fixed. This in turn controls a high-voltage (1.3 kV) DC-AC inverter or a matrix of LEDs. The method to control the intensity of LED is to pulse them with PWM which can be source of harmonic flicker.

The bare display panel will only accept a digital video signal at the resolution determined by the panel pixel matrix designed at manufacture. Some screen panels will ignore the LSB bits of the color information to present a consistent interface (8 bit -> 6 bit/color x3).

With analogue signals like VGA, the display controller also needs to perform a high speed analog to digital conversion. With digital input signals like DVI or HDMI some simple reordering of the bits is needed before feeding it to the rescaler if the input resolution doesn"t match the display panel resolution.

The statements are applicable to Merck KGaA as well as its competitors JNC Corporation (formerly Chisso Corporation) and DIC (formerly Dainippon Ink & Chemicals). All three manufacturers have agreed not to introduce any acutely toxic or mutagenic liquid crystals to the market. They cover more than 90 percent of the global liquid crystal market. The remaining market share of liquid crystals, produced primarily in China, consists of older, patent-free substances from the three leading world producers and have already been tested for toxicity by them. As a result, they can also be considered non-toxic.

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Brody, T. Peter; Asars, J. A.; Dixon, G. D. (November 1973). "A 6 × 6 inch 20 lines-per-inch liquid-crystal display panel". 20 (11): 995–1001. Bibcode:1973ITED...20..995B. doi:10.1109/T-ED.1973.17780. ISSN 0018-9383.

Richard Ahrons (2012). "Industrial Research in Microcircuitry at RCA: The Early Years, 1953–1963". 12 (1). IEEE Annals of the History of Computing: 60–73. Cite journal requires |journal= (help)

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. AIP. 37 (1): 1079–82. doi:10.1889/1.2433159. S2CID 129569963.

Kim, Sae-Bom; Kim, Woong-Ki; Chounlamany, Vanseng; Seo, Jaehwan; Yoo, Jisu; Jo, Hun-Je; Jung, Jinho (15 August 2012). "Identification of multi-level toxicity of liquid crystal display wastewater toward Daphnia magna and Moina macrocopa". Journal of Hazardous Materials. Seoul, Korea; Laos, Lao. 227–228: 327–333. doi:10.1016/j.jhazmat.2012.05.059. PMID 22677053.

TFT, IPS aur Super Amoled display me kaun hai best : अगर आप एक smartphone यूजर हैं। तो आपको फोन के डिसप्ले स्क्रीन के बारे में कुछ ना कुछ तो जरुर पता ही होगा। आज के डेट में डिसप्ले स्क्रीन का यूज laptop, computer से लेकर mobile तक, कई सारे डिवाइस में हो रहा है। इसी कारण डिसप्ले स्क्रीन को पहले से और ज्यादा बेहतर बनाने के लिए इनमे काफी बदलाव किये गये है।

अब हर कंपनियां ऐसी डिसप्ले स्क्रीन बनाने की कोशीस कर रही हैं। जिसे स्क्रैच और टूटने फूटने से बचाया जा सके। आज कल डिसप्ले स्क्रीन का सबसे ज्यादा यूज mobile device के लिए हो रहा है। इसी लिए आज हम यह जाने की कोशीस करेगे की, TFT, IPS aur Super Amoled display में कौन सी स्क्रीन है सबसे बेस्ट।

देखा जाये तो मार्केट में इस समय तीन तरह की डिसप्ले स्क्रीन ज्यादा मौजूद है, TFT, IPS और Super Amoled. लेकिन कई बार लोगों को ये पता ही नहीं होता है, कि कौन सी स्क्रीन सबसे बेस्ट है और वो कौन सा मोबाइल खरीदें।

इसलिए आज हम आपको TFT, IPS और Super Amoled डिसप्ले स्क्रीन के बारे में बताने जा रहे हैं। ताकि आप यह जान सके कि, कौन सी स्क्रीन है सबसे बेस्ट TFT, IPS और Super AMOLED. तो चलिए जान लेते है की, ips tft vs super amoled display which is better in hindi.

कौन सी स्क्रीन है सबसे बेस्ट TFT, IPS और Super AMOLED. चलिए एक एक करके हम लोग जान लेते है की, इन तीनो डिस्प्ले में से कौन सबसे अच्छा है। ताकि आप आसानी से यह जान सके की, कौन सी डिस्प्ले स्क्रीन वाली फ़ोन खरीदना चाहिए।

पहले के फोन में टीएफटी डिसप्ले देखने को मिलता है। ज्यादातर सस्ते और एंट्री लेवल फोन में TFT डिसप्ले लगा होता है। यह डिस्प्ले काफी सस्ता तो जरुर है। लेकिन क्वालिटी के मामले में, यह बिलकुल भी अच्छी नहीं होता है।

लेकिन इसी कारण IPS एलसीडी में फोन की बैटरी भी जल्दी डाउन हो जाती है। क्योंकि जब फोन की स्क्रीन ऑन होता है। तो IPS एलसीडी भी सारी ऑन रहती है। जिसके कारण ज्यादा पावर का यूज होता है और बैटरी जल्दी डाउन हो जाता है। लेकिन वहीं दुसरी और Super Amoled display में ऐसा नहीं होता है।

आशा करता हु दोस्तों “TFT, IPS aur Super Amoled display me kaun hai sabse best”, अब आप को पता चल गया होगा। और अब आप अपने जरुरत के हिसाब से एक अच्छा डिस्प्ले स्क्रीन वाला फ़ोन ख़रीद पायेगे।

दोस्तों अगर आपको, मेरा यह पोस्ट TFT, IPS aur Super Amoled display में कौन सी स्क्रीन है सबसे बेस्टपसंद आया हो। तो मेरे इस पोस्ट के प्रति अपनी प्रसन्नता और उत्त्सुकता को दर्शाने के लिए, प्लीज इस पोस्ट को Social media जैसे कि Facebook, Google+, Twitter इत्यादि पर share कर सकते है।

इस तरह के और interesting updates के लिए। हमारे Newsletter को भी जरुर से subscribe कर ले। ताकी आप को हमारे new post का notification हमेसा मिलता रहे। धन्यवाद.

A thin-film transistor liquid crystal display (TFT LCD) is a type of liquid crystal display (LCD) that makes use of thin-film transistor technology in order to improve qualities such as contrast and addressability. TFT technology means that an individual transistor is used to drive each individual pixel, allowing for faster response times.

Thin-film transistor liquid crystal display technology uses "field-effect" transistors, which are built by layering thin films on a glass substrate, hence the name. This technique is commonly used for creating microprocessors. The TFT in the LCD controls individual pixels in the display by setting the level of the electric field across the three liquid crystal capacitors (one for each sub-pixel of red, green and blue) in the pixel in order to control the polarization of the crystal material. The amount of polarization in the crystal determines the amount of light that reaches the color filter from the backlight. Because of this ability to directly and quickly control each pixel, TFT is also called active-matrix LCD technology.

IPS, also known as In-Plane Switching, is a type of monitor display and screen technology. More specifically, an IPS panel is a type of TFT LCD (or "active matrix" LCD). LCD, or Liquid Crystal Display, is the use of light modulating properties from unlit liquid crystals for providing a flat panel or electronic visual display. TFT, which stands for Thin Film Transistor, is an LCD display variant built and marketed for enhanced color, as well as contrast and black levels. The two most common types of TFT LCDs are IPS and TN displays.

The active matrix IPS TFT LCD was developed by Hitachi in 1996 as a solution to the display limitations of TN TFT LCDs (Twisted Nematic) from the late 1980s, which are standard non-IPS LCDs. The TN display is known for its flawed viewing angles, such as inverting colors at extreme angles, and poor color quality. By contrast, IPS displays provide wider viewing angles and higher quality color reproduction by altering pixels to be parallel, rather than perpendicular. In an IPS screen, the liquid crystals run parallel with the panels when energized. In a TN display, the crystals turn perpendicular to the top of the panel. High-performance tablets and smartphones deploy IPS display technology because these electronics are commonly used to watch movies, video chat and store photos. The improved angle and color technology features provide an overall better experience for the user. Creative professionals also benefit from an IPS monitor because an IPS LCD that provides a wider color gamut and greater viewing angles help achieve better aesthetic accuracy and superior results.

An IPS display, also known as an In-Plane Switching panel, is a type of high-quality display technology typically deployed in high-performance computer and laptop monitors, tablets and smartphones. IPS provides a better user experience because of its wider angle and enhanced color quality, display features which have evolved quite a bit over time since TN-effect LCD displays were introduced and ubiquitously used in the 1990s.

To help determine if IPS is best for your computing needs, first you"ll need to understand the display technology TFT LCD. TFT LCD stands for "Thin Film Transistor" and "Liquid Crystal Display." LCD uses polarizing material and liquid crystals to form a display. TFT LCDs, also known as "active matrix", were developed as a variant of LCD. TFT LCDs improved the color, contrast and response times of passive matrix LCDs.

The two most common types of TFT LCDs are IPS TFT LC and TN TFT LCD. TN generally has a faster response time, which provides better entertainment experiences for watching sports or gaming, but IPS was designed to solve TN display flaws, such as a poor viewing angle and low-quality color reproduction. If you use your laptop or smartphone for creative purposes, to watch movies, video chat or upload photo albums, you"ll want an IPS for the best viewing angles and color accuracy.

IPS (In-Plane Switching) is one of the most common types of TFT LCD display. TFT LCD enhances the image quality of a basic LCD display using thin-film transistor technology. IPS LCD, which is a variant of (active matrix) TFT LCDs, further improves display technology by providing better color reproduction and a wider, more accurate viewing angle. IPS TFT LCD technology is widely used for high-performance computers, laptops, tablets and smartphones.

LCD stands for Liquid Crystal Display. It"s a thin screen type that formulates a bright panel display using two layers of polarized panels and a liquid crystal solution. Light projects through the liquid crystals to produce an image, yet because the liquid crystals are unlit, they need a backlight.

TFT LCDs (also known as active matrix LCDs) were developed to produce greater color, contrast and response times in LCD displays. The two most common types of TFT LCDs include TN TFT LCDs (standard non-IPS) and IPS TFT LCDs. A monitor with an IPS display provides enhanced features, such as optimal viewing angles, color accuracy, invariable color reproduction and better power consumption. In summary, IPS is a variant of TFT LCDs that improves upon technological limitations within TN panels that have been flawed by poor viewing angles and color reproduction.

Lenovo"s ThinkPad X Series Laptops offer high-performance lightweight laptops designed with IPS (In-Plane Switching) technologies. The ThinkPad X1 Carbon Ultrabook provides a stunning display produced by the ThinkPad ColorBurst Display, an antiglare screen and 300 nit with IPS features that provides 180-degree, wide-screen viewing. Nit is the standard measurement of luminance or candela per square meter. Units with a nit of 300 produce greater screen brightness and clarity, so you can expect clear text, bright imaging, true coloring and an anti-smudge screen.

The ThinkPad X240 Ultrabook Laptop, also part of the ThinkPad X Series, is equipped with HD display and IPS technology. The ultrabook"s IPS technology ensures exceptional user experiences by providing features that display high levels of brightness, rich and vivid coloring and 180-degree viewing angles.

Lenovo also offers tablets with HD display and IPS multipoint touch screens providing bright and crisp viewing. Experience the high performance of IPS LCD technology with IdeaTab, Yoga, ThinkPad and Lenovo Miix 2 tablet series. The Lenovo Miix 2 8-inch and 10-inch tablets in particular feature spectacular IPS displays with full HD.

For a full list of Lenovo PC desktops with IPS technology, visit the Desktops & All-in-Ones page on the Shop Lenovo page. Learn more about premium performance ThinkCentre and stylish IdeaCentre desktops with HP and frameless IPS displays that create high brightness, color vibrancy and a wide viewing angle.

Thin-film transistors are built by layering the thin films of an active semiconductor, hence the name, as well as a dielectric layer and some metallic contacts on a glass substrate. Glass is used because it is nonconductive with excellent optical clarity; it is also nonreactive to the chemicals used in semiconductor processing. In contrast, in the construction of a typical transistor, the substrate used is a semiconductor material, usually a silicon wafer.

Thin-film transistors are primarily used in LCD displays, which is why glass is used as the substrate. TFT technology is also used in both direct and indirect capture digital radiography detectors used in medical radiography. Active-matrix organic light-emitting diode (AMOLED) screens also have a TFT layer.

The demand for the best visual experience has grown higher over recent years. Everyone wants the best in the class display to their smartphones to view the high-definition magic their phone provides. This demand for better display has risen recently as big brands like iPhone and Samsung have added some absolutely gorgeous displays to their smartphones.

The major battle begins here. The two competitors of the game are LTPS LCD and AMOLED. These are state of the art displays and people often find themselves comparing these two displays. People are wondering about the result for LTPS vs AMOLED.

LTPS and AMOLED comparison has always been an interesting debate. Potential buyers of smartphones keep comparing the difference between LTPS and AMOLED. There is a complete LTPS and AMOLED comparison below which outlines the difference between these two types:

LTPS stands for Low-Temperature PolySilicon. This type of display provides a faster and more integrated display compared to a standard LCD. The LTPS display provides a better picture quality for the user and some people consider it to be more true to life. It provides larger picture densities and is also lower on power consumption as it does not light up every pixel individually. People can expect a higher picture resolution in their displays.

AMOLED stands for Active Matrix Organic Light Emitting Diode. AMOLED displays are completely different. They use an array of LEDs that help light up every pixel individually, so the only area of the display that is in use, only those pixels light up and the others stay shut. This helps provide a higher contrast to the image with very deep blacks. The display also helps in power consumption as every pixel draws power individually.

There is no actual winner to this debate, just like the console war or the Android vs Apple debate. The choice depends completely on the user and their tastes and preferences. If the users want a better picture resolution in their display, they can go with LTPS LCD and if the user wants a higher contrast picture to their display then they can go with AMOLED. Both displays deteriorate faster than standard LCD screens. Apple is known to use LCD panels in their smartphones and Samsung is known to use AMOLED ones. These are the points that can help the user make an informed decision about which display they would want to go with.

New Delhi: The technology used in mobile displays in the modern day smartphones has progressed significantly. In the era of touchscreen  smartphones, the display technology has become one of its primary selling points, and certainly its most unique feature. Not only we want the touch screens to offer crisp text, vibrant images, blur-free video and enough brightness, we want them at low cost too.

For instance, HTC One uses Super LCD3 tech, in its 4.7in screen which gives a resolution of 1920 x 1080 pixels, with pixel density of 469 pixels per inch (ppi). This results in super display in terms of crispness and colour reproduction. HTC says the SLCD technology gives the phone better power management, improved viewing angles and is easier to produce.

Here we"ve rounded up all the important information about different mobile screen types below, so you"ll know what to look out for on your next phone.

The Thin film transistor liquid crystal display (TFT LCD) technology is the most common display technology used in mobile phones. A variant of liquid crystal display (LCD), the technology uses TFT technology to enhance image quality. It offers better image quality and higher resolutions as compared to earlier generation LCD displays.

IPS LCD Stands for In Plane Switching liquid Crystal Display. This technology offers better display quality as compared to the TFT-LCD display. The good part about IPS LCD is that it offers better viewing angles and consumes less power. Due to higher costs, it is found only on high-end smartphones. Apple uses a high resolution (640x960 pixels) version of IPS LCD in its iPhone 4, which is also called Retina Display.

Organic Light Emitting Diode (OLED) display technology is much better as compared to the LCD display technology because of its excellent colour reproduction, faster response times, wider viewing angles, higher brightness and extremely light weight designs.

OLEDs are brighter than LEDs and do not require backlighting like LCDs. Since OLEDs do not require backlighting, they consume much less power than LCDs.

Since these display forms are easier to produce, they can be made to larger sizes. Because OLEDs are essentially plastics, they can be made into large, thin sheets.

AMOLED stands for Active Matrix Organic Light Emitting Diode. A step ahead of OLED screens, the AMOLED screens can control each pixel individuality while maintaining the properties of an OLED panel. AMOLED screens use a different subpixel arrangement which can reduce the image quality a bit.

AMOLED screens have all the attributes of an OLED display like excellent colour reproduction, faster response times, wider viewing angles, higher brightness and extremely light weight designs.

Super AMOLED display technology is an advanced version of AMOLED display. Samsung uses this term for the AMOLED panels that they develop. Super AMOLED  screens are built with capacitive touch sensors on the display itself. Super AMOLED display is much more responsive than an AMOLED display. Samsung top-of-the-line Galaxy SII comes engineered with Super AMOLED display technology. Samsung has already took it"s SMOLED screen to next levels by developing Super AMOLED+, HD Super AMOLED+ and FHD Super AMOLED+ screens.

It is a name given by Apple to the high-resolution screen technology introduced on the iPhone 4 in June 2010. Something is a Retina Display when it offers a density of pixels above 163 pixels per inch. The company calls it the Retina display because its pixels cannot be individually identified by a human eye, thus rendering a super sharp display, more crisp text and more clear pictures.

Retina Display is designed to smooth the jagged edges of pixels are provide a higher-quality image than previously available on mobile devices. Apple claims that its resolution is so good that it makes it impossible for the human eye to distinguish individual pixels. Its effects shows up in text, images and videos.

Color boost is simply Moto"s marketing term for their new display. Although it now uses LCD displays, the company fine-tuned its panels to match the saturation of OLED displays while maintaining the higher performance of LCD. It"s somewhere in the middle ground.

If you want to buy a new monitor, you might wonder what kind of display technologies I should choose. In today’s market, there are two main types of computer monitors: TFT LCD monitors & IPS monitors.

The word TFT means Thin Film Transistor. It is the technology that is used in LCD displays.  We have additional resources if you would like to learn more about what is a TFT Display. This type of LCDs is also categorically referred to as an active-matrix LCD.

These LCDs can hold back some pixels while using other pixels so the LCD screen will be using a very minimum amount of energy to function (to modify the liquid crystal molecules between two electrodes). TFT LCDs have capacitors and transistors. These two elements play a key part in ensuring that the TFT display monitor functions by using a very small amount of energy while still generating vibrant, consistent images.

Industry nomenclature: TFT LCD panels or TFT screens can also be referred to as TN (Twisted Nematic) Type TFT displays or TN panels, or TN screen technology.

IPS (in-plane-switching) technology is like an improvement on the traditional TFT LCD display module in the sense that it has the same basic structure, but has more enhanced features and more widespread usability.

These LCD screens offer vibrant color, high contrast, and clear images at wide viewing angles. At a premium price. This technology is often used in high definition screens such as in gaming or entertainment.

Both TFT display and IPS display are active-matrix displays, neither can’t emit light on their own like OLED displays and have to be used with a back-light of white bright light to generate the picture. Newer panels utilize LED backlight (light-emitting diodes) to generate their light hence utilizing less power and requiring less depth by design. Neither TFT display nor IPS display can produce color, there is a layer of RGB (red, green, blue) color filter in each LCD pixels to produce the color consumers see. If you use a magnifier to inspect your monitor, you will see RGB color in each pixel. With an on/off switch and different level of brightness RGB, we can get many colors.

Wider viewing angles are not always welcome or needed. Image you work on the airplane. The person sitting next to you always looking at your screen, it can be very uncomfortable. There are more expensive technologies to narrow the viewing angle on purpose to protect the privacy.

Winner. IPS TFT screens have around 0.3 milliseconds response time while TN TFT screens responds around 10 milliseconds which makes the latter unsuitable for gaming

Winner. the images that IPS displays create are much more pristine and original than that of the TFT screen. IPS displays do this by making the pixels function in a parallel way. Because of such placing, the pixels can reflect light in a better way, and because of that, you get a better image within the display.

As the display screen made with IPS technology is mostly wide-set, it ensures that the aspect ratio of the screen would be wider. This ensures better visibility and a more realistic viewing experience with a stable effect.

Winner. While the TFT LCD has around 15% more power consumption vs IPS LCD, IPS has a lower transmittance which forces IPS displays to consume more power via backlights. TFT LCD helps battery life.

Normally, high-end products, such as Apple Mac computer monitors and Samsung mobile phones, generally use IPS panels. Some high-end TV and mobile phones even use AMOLED (Active Matrix Organic Light Emitting Diodes) displays. This cutting edge technology provides even better color reproduction, clear image quality, better color gamut, less power consumption when compared to LCD technology.

What you need to choose is AMOLED for your TV and mobile phones instead of PMOLED. If you have budget leftover, you can also add touch screen functionality as most of the touch nowadays uses PCAP (Projective Capacitive) touch panel.

This kind of touch technology was first introduced by Steve Jobs in the first-generation iPhone. Of course, a TFT LCD display can always meet the basic needs at the most efficient price. An IPS display can make your monitor standing out.

There is a constant debate on Amoled vs LCD, which is a better display? Where Amoled display offers some remarkable colors with deep black eye-soothing contrast ratio, LCD displays offer much more subtle colors with better off-axis angles for viewing & offers a much brighter picture quality.

While purchasing a new smartphone we consider various specifications like software, camera, processor, battery, display type etc. Among all the specifications display is something that most people are concerned about. 2 of the major competitors of smartphone display are AMOLED and LCD. Often in the LCD vs Amoled comparison, people get confused about which one to choose. In this article, we have explained a clear comparison of the Amoled vs LCD screen to find out which is actually better.

Amoled display is nothing but a part of OLED display which comes with some extra features. The first component is Light Emitting Diode (LED) and the second component is "O", here "O" stands for organic & together they make OLED. The real meaning derived from it is organic material placed with 2 conductors in every LED. And this is how light is produced.

The OLED display can generate light out of individual pixels. AMOLED displays contain Thin Film Translator (TLT) which makes the overall procedure of sourcing current to the correct pixel much quicker and smoother. The TXT further helps grab control for operating different pixels at a time. For example, some pixels could be absolutely switched off though others remain on in Amoled displays. This produces a deep black color.

Speaking about LCDs, it is relatively pretty much commonly found in today"s smartphones. LCD (Liquid Crystal Display) offers a devoted black light that is white or rather slightly blueish in color. Mostly here we get a blue light that is passed through some yellowish phosphor filter which brings out the white light. The white light is subsequently passed through multiple filters and thereafter the crystal elements are again passed through blue, red & green filters. Note that LCD displays have both passive and active matrix which depends on the cost and requirement involved.

Since the process involved in LCDs is much more complex than Amoled & requires extra steps, when compared to AMOLED displays, LCDs are less battery friendly. In the technological era where energy efficiency is the first priority, Amoled displays are certainly going to be the future of display technology. But both of them come with a separate set of pros and cons and it is only by knowing the pros and cons you will be able to choose the right one.

Amoled display technology is mostly used in smartphones, media players & digital cameras. Amoled is mostly used in low power, cost-effective & large application sizes.

Cost is one of the major factors that act as a differentiator between the two display types. Amoled displays are comparatively more expensive than LCD displays because LCD displays are much cheaper to manufacture. So while buying a low-budget smartphone, the probability to get a Amoled display is pretty less.

The quality of a display is mainly measured according to the colors and sharpness it offers. Also while comparing two displays, only technology comparison won"t work because often displays behave inversely even if a manufacturer is using the very same technology. If you consider colors especially contrasting colors such as blue, red or green, Amoled will serve better throughout the day. This happens mainly because in the case of AMOLED displays, as mentioned above, every pixel present in it emit its own light whereas in LCD light comes out of the backlight. Therefore Amoled displays offer high-end saturation and vibrant colors compared to LCD displays.

As Amoled displays put out vibrant colors, you will find Amoled displays to be warmer in nature compared to LCD displays which has a more neutral whitish tint. In short, the pictures seen on Amoled displays are more eye-soothing compared to LCD displays where the pictures appear more natural.

In the Amoled vs LCD screen display comparison, another thing to consider is the brightness offered by both of them. Compared to LCD displays, Amoled displays have lesser brightness levels. This is mainly because of the backlight in LCD displays which emits a higher brightness level. Therefore if you are a person who spends most of the time outdoors and mostly uses your smartphone under the sun, then LCD is the right choice for you. Although certain leading brands are working on the brightness level in Amoled displays.

The display is one such thing that sucks your phone"s battery to a great extent. In Amoled displays, the pixels can get absolutely switched off thereby saving a lot of battery. Whereas LCD displays