monochrome lcd displays brands

LCD displays. Of course, there is only one color for the backlight and one color for the characters, but as you can see here on the picture above, there could be many colors of backlights. We can have a white backlight, orange, green, blue or any backlight color.

The last part of this article covers graphic displays and character displays, the difference between them and how it influences the cost of an LCD display. The most basic LCD displays are the segmented monochrome LCD displays or icon displays. In this kind of LCD displays we have only some icons and characters, but they are defined when the display is being produced. What we see on the display is defined and we cannot have anything else, the other area is completely off. You can only switch on and off the display segments. This is the cheapest technology to produce, and it is made by mask during the production, so it is usually reserved for high volume applications, that are very well defined during the production phase. For example, this can a be kind of watch, or calculator, or temperature controller. The advantage is the cost, but the disadvantage is that later we cannot change anything, we cannot change the software and add another icon.

Another type of a display is a graphic display. So, we have character displays and a fully graphic display. The character display is also a very popular technology, and it is a combination between a segment display and the graphic display because we have the fields, that are defined, and they can show only the characters, letters, numbers, symbols and some added characters defined by the controller of a display. On this kind of screen, we cannot put the full graphic, because every character is physically separated from the other.

Next, we have the fully graphic display. In this kind of LCD display we have a matrix of pixels. It could be 64 by 256, or 64 by 128 pixels, so on this kind of screen we can show almost every image, because we can switch every pixel on and off. We can show letters, characters, images, small, big, anything we want. The disadvantage is the vast number of pixels that we need to connect. The controller and the glass are complicated, because we need to route the wires from every pixel out from the glass and connect it to the controller. So, in the monochrome LCD display family, this kind of display is the most expensive. Other kinds of displays are cheaper, not only because the glass is simple, but because the controllers are simple too.

LCD monochrome displays can be used in a variety of applications including in portable devices such as digital cameras, watches and smartphones. They"re also used in electronics products such as DVD players, video game devices and clocks.

LCD monochrome displays are compact, energy efficient, have a low electrical power consumption and are easy to fit to your PCB (printed circuit board).

... properties, the RS PRO 7-segment LCD display is clear and easy to read. It"s an ideal choice when you need an LCD panel that works well in both direct sunlight and low-light conditions.

The LM240160SCW, manufactured by TOPWAY, is a graphic LCD display module equipped with 240x160 dot matrix pattern. The module is used in operations that require monochrome graphic ...

The LM12832B Series, manufactured by TOPWAY, is a graphic LCD display module equipped with 240x64 dot matrix pattern. The module is used in operations that require monochrome graphic ...

Backlight is used for black-and-white LCD backlight, which is mainly divided into side backlight and bottom backlight. The side backlight is led light entering from one end of the light guide plate, with ...

In many cases, attractive organic LED technology has come to replace older, monochrome LC displays. We can assist you with character-based and fully graphic ...

... waterproof interface. In addition, the 2K high-definition monitor screen can display delicate picture quality. Furthermore, optical bonding between the touch screen and LCD modules makes the image more realistic.