9.7 lcd panel spec brands

VIS097XN02 is a TFT LCD display screen module model that adopts a 9.7 inch 4:3 IPS type LCD with a 1024*768 resolution. CTP (Capacity Touch Panel) and RTP(Resistive Touch Panel) can be added according to user requirements.

Century LCD(CTC) originally produced this 9.7-inch IPS LCD panel and is designed for Apple Ipad2. Due to the 4: 3 display ratio and low price, it has become popular in the industrial market. The main applications are POS machines, bank display equipment, electronic restaurant menus, and vehicle displays. Panel manufacturers such as Innolux and IVO soon began to produce this 9.7-inch panels.

Other 9.7 inch TFT LCD Display Screen Module(LCM) models（1024*768） that can be replaced by VIS097XN02 are BI097XN02 V.Y, TM097TDHG04, BF097XN, LP097X02-SLQE, etc.

LP097QX1-SPAV (Alias: LP097QX1 (SP)(AV)) is a 9.7 inch diagonal a-Si TFT-LCD display screen product from LG Display, with a built-in WLED backlight, without backlight driver, without touch screen. On the basis of latest version datasheet Ver0.1 which was released out on 8 1 2012, LP097QX1-SPAV supports display2048(RGB)×1536 (QXGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe, according to calculation of Panelook it"s pixel density is 264 PPI. As for mechanical detail, it features active area of 196.608(W)×147.456(H) mm, outline size of 208.88(W)×167.12(H) mm, viewing area size of 201.01(W)×151.86(H) mm, with surface treament of Glare (Haze 0%), Hard coating (3H), Antireflection, net weight of 140g (Max.). As a IPS, Normally Black, Transmissive LCM product, LP097QX1-SPAV can provides 440 cd/m² display brightness 600:1 transimissive contrast ratio, 89/89/89/89 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 30 (Typ.)(Tr+Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 72% (NTSC). This product adopted WLED as it"s backlight systerm which was placed as Edge light type and have a working life time of 10K hours, external backlight driver is additionally needed. LP097QX1-SPAV utilizes eDP (4 Lanes) as it"s signal inputting systerm, which connected by 51 pins FPC with power supply voltage of 3.3V (Typ.). It"s typical vertical frame rate (Fv) is 60Hz. For more latest product detail of LP097QX1-SPAV we strongly recommend that you should refer to datasheet listed on Panelook.com or contact with LG Display.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.

Because IT8951 will cost a big size of RAM, some STM32 cannot support without an external SDRAM device. So we here use Open429I as a test board, Open429I integrates IS42S16400J (64-MBIT) SDRAM, and has full memory to drive the 9.7inch e-paper.