spi lcd module lcd 12864 pricelist

Reason: Controller IC ST7565R used on dislay ERC12864FS-1 is hard to source because of the global chip shortage.We now use the compatible IC ST7567S as replacement. The part number is updated to ERC12864FS-1-S7.

ERC12864FS-1-S7 is 1.4 inch white background with 128x64 monochrome black pixels cog(chip on glass) lcd module,ST7565S controller,compact size,high contrast,wide operating temperature,wide view angle,white led backlight,fstn lcd,fpc connection,optional zif connector and led backlight connector.It supports 6800 8-bit,8080 8-bit parallel and 4-wire serial spi interface.

You may wish ERC12864SBS-1 could come with frame backlight without backlight wires ,The part number ERC12864SBSF03-1 should meet this requirment. Except the backlight structure,the other spec is the totally same with ERC12864SBS-1.

ERC12864SBSF03-1 is still not our general product ,we don"t have enough stock .You have to email (sal[email protected]) our sales to buy samples or orders. Besides the minimum order quantity is no lesss than 1000pcs per order.The production lead time is 5-6 weeks.

This module is engineered for high volume production. It uses a "TAB" (tape automated bonding) or "COF" (chip on flex) style flex tail mated with a "COG" (chip on glass) display. The TAB connector is soldered directly to corresponding pads on your PCB using a hot-bar soldering machine. High volume contract manufacturers will be familiar with this type of construction and its assembly methods. Hot-bar soldering machines designed for prototype, rework or repair of TAB connections are available from equipment suppliers at reasonable cost.

This is an extremely low-power 128x64 graphic LCD display module. It has an integrated white LED backlight that illuminates the display easily in low-light conditions. This display is perfectly suited for hand-held or any application requiring low-power or a very a thin display. It has an integrated controller and the FFC tail is designed to mate with standard 18-conductor 0.5mm pitch ZIF connectors (typical would be Omron XF2L18351A/ DigiKey P/N OR754CT-ND).

LCD module can include character LCD module or graphic LCD module. Both use traditional COB (Chip on Board) or COG (Chip on Glass) technologies. Now, color TFT LCD displays and OLED displays are popular in the display market. LCD module price is really low and LCD display modules are also easy to produce in small quantity and easy to light up. They are still very popular among hobbyists and have extensive applications in printers, microwave, water machine, medical device, car and home audio, white goods, game machine, toys, industrial meters and etc.

Orient Display offers many standard sizes including 8×1 characters, 8×2 characters, 16×2 characters, 16×4 characters, 20×2 characters, 20×4 characters, 24×4 characters, 40×4 characters, and many more. Orient Display’s character LCD displays cover small LCD modules for tiny devices to large character LCD displays for medical use. Orient Display LCD modules use a special controller AC780S which can provide SPI and I2C interface which can be easily used by customers with less hardware resources.

LCD customization is also available from Orient Display. The LCD panel technologies include TN, STN, FSTN, FFSTN or VA (Vertical Alignment) types with positive or negative mode, and options of polarizers (reflective, transflective or transmissive). Different LED backlights are available in various colors including yellow/green, white, red, blue, green, amber, and RGB LEDs as well as no backlight option.

If you have any questions about Orient Display TFT LCD displays or if you can’t find a suitable product on our website. Please feel free to contact our engineers for details.

7 fonts and graphic engine embedded, touch screen and flash chip drivers embedded(if touch screen or 2 to 16MB flash chip installed), custom fonts can be downloaded to the module"s flash.

High level commands set (61 commands total) are easy to remember and understand, eg.: send 5 bytes: "CCabc" will draw a ratio=c pixels circle at coordinate (a,b) on the screen; 5 bytes "DNALL" will put the module to sleep mode(<0.1mA), and more...

Because the ST7565 chip used widely in 12864 LCD panels, and it’s very flexible of configuration, you need set at least 8 bytes of init parameters, if the ST7565 (SPI) not working well with this adapter, please use command “SLCD2” following by 8 bytes of init parameters also:

LCD modules are one of the most popular components and are great for users who are looking for a more natural LCD experience, even if it is just a small bit of light. high brightness will interfere with the display of others.

A LCD panel (LCD)) is one of the most popular electronic devices that have a lot of electronic components as well, a one-time wearable LCD module (LCD), is a popular choice because it provides more numerous features to the user. compact lcd modules allow for simple components and can be used with a higher amount of power. As a result, the lcd modules allow for simple components, such as gadgets, and are used to supplement the ones that are more important.

While there are a number of wholesale lcd modules available on Alibaba.com, one may be able to find a great variety of wholesale lcd modules and kits. For consumers who are looking for suitable lcd modules in bulk, a quick search on Alibaba.com for the lcd module wholesale that is suitable for a number of wholesale components. One of the most popular lcdds bulk assembly is the lcd module wholesale that is suitable for one of the most convenient components and wholesalers.

Use this 2.2" Color TFT LCD Display to add a vibrant color display to your Raspberry Pi projects. Just wire up your display and use the SPI protocol to communicate with your TFT. This is more advanced than our Raspberry Pi LCD shields since you have to wire using a breadboard and use the fbtft Raspberry Pi Library when configuring so we recommend it for intermediate users.

For Arduino users, this display is also Arduino compatible however we recommend our 11 Pin 2.2" TFT LCD Display which can be plugged directly into an Arduino UNO or Mega so you don"t have to use a breadboard.

Shenzhen SLS Industrial Co.,ltd established in 2003, is a professional LCD module manufacturer and solution provider. We have 1 full-auto COG assembly line, 2 semi-auto assembly line, backlight assembly line, no dust TP bonding line and manufacturing tech support, we can provide unique, innovative and cost effective LCD module development and manufacturing. Our product range includes: middle-small size TFT LCD, industrial capacitive touch panel... Our LCD products have been widely used in communications, GPS, Equipment, electronic audio-visual, instrumentation, household appliances, PDA and other industries.