sipeed 2.4 tft lcd quotation

This display is very suitable for Grove AI HAT for Edge Computing and the Sipeed serial product we have released. High resolution & wide viewing angle make it a perfect option for your AI project such as face detect.

The embedded EVE graphics accelerator chip simultaneously handles the display, touch, and audio functionality, lowering the development burden. The capacitive touchscreen overhangs the LCM making this display look fresh and clean when integrated into a product. The small TFT screen packs a punch. It"s sunlight-readable, has a high pixel density, and displays vibrant colors.

This module comprises our 2.4" Full-Color Capacitive Touchscreen TFT attached to an EVE accelerated board. Connect with this module using a simple 30-pin FFC ZIF connection.

Spice up your Arduin project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

Since the display needed to easily fit in the palm of the rider’s hand, we recommended our 2.4” TFT LCD. This display delivers crisp, high resolution graphics and characters while maintaining a slim profile.

While the controller"s outer case protects the display against water, we needed to make sure that the riders could easily read the screen in all lighting conditions. By default, our 2.4" TFTs come with white LED backlights that are visible in most lighting conditions.

The 2.4 Inch TFT LCD Touch Screen LCD Display Module for Arduino is a beautiful large touchscreen display shield with built in microSD card connection. The LCD has excellent vivid color contrast. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades). It has 240×320 pixels with individual pixel control which is way more resolution than a black and white 128×64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

The linear power supply is [+]Efficient and [+]Small but [-]Can"t output 5v [-]Low max current output [-]Have 500mV dropout voltage @500mA so the battery is unusable when it is 3.7 volts, which is real bad as lithium batteries" protector boards over discharge kicks in @2.4v. I also need 5v for the USB host port for keyboards and mouse. Because the host port is not needed at all times, so I wanted to use existing power bank circuit that auto turns on when peripherals are connected. (Existing circuits are great, maybe efficient and safer), so no boosting required if not needed.

Using the power bank circuit that my li polymer battery comes with (power bank comes with) can [+]output more current, so can also power keyboard mice and hubs. [+]safe, with protection [+]only powers on when there is current draw (Teensy itself may not be able to keep it on, maybe can with the LCD backlight) or/and USB device is connected. Some people add resisters to add current draw, and that is bullshit. Another problem is how to control whether I want the converter to start or not, and have no complete control sucks.