water damage lcd screen phone free sample

If you’ve ever gotten your phone wet in the rain, dropped it in water or spilt liquid over it, you’re not alone. One study suggests 25% of smartphone users have damaged their smartphone with water or some other kind of liquid.

While new phones are advertised as “water resistant”, this doesn’t mean they are waterproof, or totally immune to water. Water resistance just implies the device can handle some exposure to water before substantial damage occurs.

In 2019, the Australian Competition and Consumer Commission (ACCC) took Samsung to the federal court, alleging false and misleading advertisements had led customers to believe their Galaxy phones would be suitable for:Use in, or exposure to, all types of water (including, for example, oceans and swimming pools).

Similarly, last year Apple was fined €10m (A$15.5m) by Italy’s antitrust authority for misleading claims about the water resistance of its phones, and for not covering liquid damage under warranty, despite these claims.How resistant is your phone?

The water resistance of phones is rated by an “ingress protection” code, commonly called an IP rating. Simply, an electrical device’s IP rating refers to its effectiveness against intrusions from solids and liquids.

A phone that has a rating of IP68 has a solid object protection of 6 (full protection from dust, dirt and sand) and a liquid protection of 8 (protected from immersion in water to a depth of more than one metre).

The popular iPhone 12 and Samsung Galaxy S21 phones both have a rating of IP68. However, regarding exposure to water, the iPhone 12 has a permissible immersion depth of a maximum of 6m for 30 minutes, whereas the Galaxy 21’s immersion limit is up to 1.5m, also for 30 minutes.

While IP ratings indicate the water-repellent nature of phones, taking most phones for a swim will land you in deep trouble. The salt content in oceans and swimming pools can corrode your device and cost you a hefty replacement.

Exposure to water is something manufacturers have in mind when designing phones. Most Apple and Samsung phones come with a liquid contact/damage indicator strip located inside the SIM card tray.

2. If your phone is water resistant and you’ve spilt or submerged it in a liquid other than water, both Apple and Samsung recommend rinsing it off by submerging it in still tap water (but not under a running tap, which could cause damage).

6. Use a compressed aerosol air duster to blow the water out if you have one. Avoid using a hot blow dryer as the heat can wreck the rubber seals and damage the screen.

8. Leave your phone in an airtight container full of silica gel packets (those small packets you get inside new shoes and bags), or another drying agent. These help absorb the moisture.

9. Do not charge the phone until you are certain it’s dry. Charging a device with liquid still inside it, or in the ports, can cause further damage. Apple suggests waiting at least five hours once a phone appears dry before charging it (or until the alert disappears).

If the above steps don’t help and you’re still stuck with a seemingly dead device, don’t try opening the phone yourself. You’re better off taking it to a professional.Ritesh Chugh is a senior lecturer in information systems and analysis at CQUniversity Australia

It fell in the toilet. Your clumsy partner knocked a glass of water onto it. You forgot it was in your pocket when you jumped into the pool. That"s just a few of the hundreds of ways your phone could come into life-threatening contact with liquid.

Fortunately, waterproofing has become mostly standard on modern phones. New iPhones, Samsung Galaxy devices, and Google’s newest Pixel phones all feature some degree of water resistance or waterproofing. How well a phone resists water is measured on an IP (or Ingress Protection) scale. If your phone is rated with a high number, like IP67 or IP68 protection, congratulations, it’s probably going to be fine! But if it’s got a lower rating, or none at all, you should prepare for the worst before you start chilling in the hot tub with your trusty Sidekick.

So when your phone decides to take a dive, as soon as you"re done freaking out, you"ll probably begin frantically tapping all the buttons, blowing on it, or blasting it with a hair dryer to quickly get rid of all that water. While those are all well-meaning actions, guess what? Totally the wrong approach. Here"s the right way to rescue your water-damaged smartphone.

First, retrieve it as quickly as possible. If your phone is still in the bottom of the jacuzzi or the toilet, get it out ASAP. The longer it"s in the liquid, the greater the likelihood of damage will be.

Once the device is no longer submerged, power it off right away. Don’t try to press any of the other buttons or load any apps, just switch it off. Remove the case if you have one. If you have a phone with a removable battery, pop the battery out. You want to cut off power in the device as quickly as possible to prevent the possibility of a short circuit. Most of today’s smartphones don’t have removable batteries, but some older models, or new models built with repairability in mind like the Nokia 1.3, let you pop the battery out.

Do not blow-dry your wet phone or stick it in the oven! Heat can damage the delicate electronics inside. What you should do is give the naked, case-free phone a quick wipe with a clean towel, making sure no water accidentally ends up draining into its charging port, SIM or MicroSD slots, or headphone jack (if your phone still has one). If there are traces of water trapped inside cracks or indentations in the case, try carefully and conservatively using compressed air to blow it out. If you don’t have a can of air lying around, you can use your mouth to gently blow it out. Just be careful not to blow the water further inside the phone, or add any of your own spit to the mix.

Next we have a few different options. If you search the internet or ask a friend, a common piece of advice you’ll hear is to stuff your device in a bag of rice. It might work in a pinch, but that method can cause some problems. While rice is absorbent, it’s incapable of collecting all the moisture hidden deep within your phone, so it only serves as a partial fix. Also, the rice gets mushy and sticky as it absorbs the water, and then you could wind up with gummy bits of rice stuck in your phone’s seams and ports, or dust deep in your device"s crevices. You can wrap the phone loosely in a paper towel before dropping it into the rice, but this is still not your best option.

On top of call difficulties, a broken speaker can also cause problems when watching videos or listening to podcasts. First, carefully check your phone to determine if there is any external damage. If nothing is visible, make sure the latest software update is installed on your device. In addition, try some basic troubleshooting by turning your phone on and off while leaving it unplugged.

Once a phone has water damage — from small spills to a full liquid plunge — there’s often no easy fix. The first step should be to check if your smartphone’s Liquid Contact Indicator has been activated. Most models, including Apple, LG and Samsung, have small visible indicators to show whether water damage has occurred. Consider peace of mind for those inevitable accidents with Verizon’s Verizon Protect or  Total Mobile Protection. Not only is your phone covered if it gets water damage, you may be eligible for a full replacement that same day.

From the rays in a hot car to a sunny day spent at the beach, high temps and direct sunlight can cause serious and lasting damage to a smartphone. Extreme heat can damage a smartphone’s internal components and result in slower speeds or even loss of data. And often the damage is not visible from the outside.

Before you panic, get your phone back to room temperature and exit all apps. Look over the exterior of the phone to see if the battery, which is especially sensitive to extreme heat, has leaked. And in all future situations, make sure to follow manufacturer recommendations. For example, Apple recommends not using a smartphone in temperatures above 95 degrees Fahrenheit.

JUMP! ®, JUMP on Demand®, and Trade-In devices with damage will be assessed at a lower value or require a fee. See your program terms & conditions for details.

The warehouse will check the device condition when we receive it. If it’s damaged, you may receive a reduced trade-in value or be required to pay a fee on your bill statement. (Prepaid customers will have the defective device shipped back instead.)

When inspecting a screen, remove any screen protectors and cases first. Tilt the device under good lighting conditions and inspect it at multiple angles. Screen damage includes hairline cracks that are difficult to see.

Mobile devices have a Liquid Damage Indicator (LDI) to show if the device has contacted any liquids. The indicator is white when it"s new, and it turns pink or red when it contacts water.

iPhone® X and above do not have a visible LDI. If you cannot identify your LDI on an iPhone X or above, we ask you to confirm the device has not been exposed to liquid.

Wearables like Apple & Samsung watches often don"t have visible LDIs. Check for moisture under the display screen, as well as corrosion, discoloration, and fuzzy growth on the charging connection.

If the device does not fully turn on and load the home screen or if it cannot stay on without being connected to a charger, it"s considered not able to turn on.

No matter how careful you are, accidents happen. Screen damage and liquid damage are not covered under the warranty, so T-Mobile can"t exchange devices with this damage. But, we don’t want you to be stuck with a broken phone, so you have two options to replace or repair your damaged device:

If liquid damages an iPhone or iPod (for example, coffee or a soft drink), the service for the liquid damage isn"t covered by the Apple One-Year Limited Warranty, but you may have rights under consumer law. iPhone and most iPod devices that were built after 2006 have built-in Liquid Contact Indicators that will show whether the device has been in contact with water or a liquid containing water.

An LCI will activate when it contacts water or a liquid containing water. The indicator"s color is normally white or silver, but when it contacts water or a liquid containing water, it will turn fully red. An LCI won"t activate because of humidity and temperature changes that are within the product"s environmental requirements.

If you aren"t sure if liquid exposure is causing an issue for your device, even if you see a red LCI, contact AppleCare or an authorized iPhone service provider for help.

* iPhone 14 models in the U.S. don"t have an external Liquid Contact Indicator (LCI). iPod nano (7th generation) and iPod touch (5th generation) don"t have a visible LCI.

From the beach to the boat, wherever we go to enjoy the warmer weather, our phones are usually right along for the fun—and keeping them above water can be a challenging task. According to 2021 Asurion claims data, more phone repair claims are filed for water damage between June and August than any other time of the year.

So, what is the best way to protect your phone from liquid damage? Asurion Experts are asked this question often while helping our 300 million (and counting) customers with all of their tech care needs. Their advice: Invest in a waterproof pouch. While some of the newest phones are considered “waterproof,” they’ll only be protected if submerged for a set period of time—to learn more, check out our guide to waterproof vs water-resistant phones. Waterproof phone pouches, like those made by CaliCase® or JOTO®, will help to keep your phone afloat.

Here"s what to do if you drop your phone in water or get it wet:Remove it from the liquid immediately. The longer it stays there, the more liquid will seep into various inlets.

If possible, open the back and remove the battery, SIM card, and microSD card (if you have one). Not sure how to remove the SIM card? Check out our guide for iPhone and Android.

Use a cloth or paper towel to dab your phone dry. Do not rub the phone, as doing so could accidentally push liquid into the phone’s more sensitive parts. If the phone was completely submerged, you might try (very) gently vacuuming around the phone’s creases and openings to suck more water out.

You’ve probably heard the suggestion to put your phone in rice if it gets wet, but we do not recommend this method. Instead, try silica gel packets, like the ones that often come with new products such as a pair of shoes,as they’ve proven to be much more effective. Fill a plastic zip-top bag with silica gel packets and bury the phone in the bag. Leave your phone in the bag for 24–48 hours.

There are a few signs that can confirm water damage to your device:Look for the visual presence of water or evaporation (or dried water markings) behind the screen.

Check the Discolored Liquid Damage Indicator (LDI). The LDI is typically located in the headphone jack, battery compartment, or SIM tray slot. If your phone has water damage, the LDI will appear red or maroon.

According to Asurion Experts, putting your water-exposed device in rice may absorb some moisture. However, it may also cause other issues for your phone, such as an introduction of dust and dry starch (a rice byproduct) into your phone"s cracks and crevices. Rice could also potentially become lodged in your phone"s charging port or headphone jack, which can be extremely difficult to dislodge as the rice swells when exposed to liquid.

Blow-drying your phone when it"s exposed to water is not recommended. While it might remove some of the surface moisture, it will do very little to remove the moisture from inside your device and the heat could do irreparable damage to your phone"s internal components.

Turn the device off and place it in an upright position to dry out, with the speakers facing downward. Doing so will encourage excess water to come out.

While dropping your smartphone into liquid typically voids the manufacturer’s warranty automatically—many phones have indicators that change colors when wet—that isn’t the case when it comes to your smartphone insurance policy. If your phone is covered, you can start a claim at asurion.com at any time.

Bryan-College Stationor 936-577-7788 inHuntsville for a Water Damage Recovery Price Quote from Bryan, Huntsville, and College Station"s Water Damage Repair Professionals

Getting your iPhone, cell phone, tablet, or computer wet is one of the worst things that can happen to it. First. Water damage is one thing that can absolutely destroy iPhones and other electronic devices. Liquid damage is not covered by warranties from Apple, Samsung, and other manufacturers, so it"s a problem that cannot be addressed for free.

Even though your iPhone or other brand of smartphone may be under warranty, Apple and other manufacturers will not replace the phone if there is water damage. Manufacturers can easily spot water damaged phones when processing warranty claims. For example, in the iPhone there are four sensors. They turn pink if the iPhone was submerged in water. If any of these sensors are pink, Apple will not replace the phone. Curious about the odds that we can help you can save a wet phone? Typically, we can fix or recover data from a little more than half of the water damaged phones that are brought in. The water damage recovery cost varies depending on the damage done. For under $50, we can run diagnostics on most devices to ascertain if they can be saved. In the case that we cannot repair the damage, we offer used iPhones and Android devices for sale at affordable prices. If we can fix it, the diagnostic charge will be applied to the water damage repair cost.

First, remove your iPhone from the liquid as soon as possible. The longer the phone is submerged in a water or liquid the worse the damage.Dry your phone as much as possible with a towel or cloth. Next, turn the phone off. Do not turn the phone for any reason. This will prevent more damage to the phone"s internal electronics. Finally, try gently applying heat with a hair dryer. Be careful, too much heat can destroy your device. Place the phone in a bag of rice overnight if the damage happens after the end of our business day. Getting your iPhone to Easy Phone as fast as you can is critical. The faster we can remove the water, the less likely your phone will be permanently damaged. Bring the phone to Easy Phone Repairs in Bryan, College Station, or Huntsville, TX to see how much damage was done and if it can be saved.

Advice above for saving a phone subjected to water damage is not guaranteed to be successful. Water damaged phones that we repair are not eligible for our limited warranty.

My Emergency Guy, Inc. is an independent, 3rd party repair shop and has no affiliation with Apple, Samsung, Microsoft or any other electronic design or manufacturing company.Our technicians have have been trained to work on the devices we repair in our shop. All of our repairs involving replacement of parts include a 90 day limited warranty. (with the exception of water damaged devices)You can be sure that the work being done at our shop is of quality caliber and the warranty is to cover any possible defects from the manufacture.

Our parts are tested before hand by quality control testers however there are rare cases where a part may be defective. In this case we will replace the part under warranty, and at no additional cost of labor.Since this is not a product warranty we don’t warranty the entire computer or device after a part is replaced. For example if we replace the LCD screen on a mac book pro and 2 months later the hard drive fails we do not cover the cost of replacement hard drive or data recovery since these are not related (this is just an example and not the opinions of My Emergency Guy, inc. employees to predict that this will happen).

Our replacement parts are intended to solve the initial problem for which we are repairing, if there is a problem with the part that causes it not to preform in the original manner then this may be a defective part. An example would be if you had a phone screen repaired with us because the glass was cracked and a portion of the new screen is not responding to touch, then we will replace this part with a new one and a new 90 day warranty on the part we replaced.

This warranty DOES NOT cover any accidental or future damage to the device or the part(s) replaced by our technicians. i.e if you have had the screen of your phone replaced at our store due to a cracked screen and it breaks again one week, one day or even one hour after leaving the shop we CAN NOT replace it under the warranty or for free. Other incidents not covered by the warranty: Broken/cracked screens or LCD, hairline crack, liquid damage, physical damage or damage from by performing work from outside of My Emergency Guy, Inc.

The simple answer to this question is yes. Any person or persons who do repairs on devices including technicians will be voiding the warranty of the phone unless they are an authorized repair center of that product. If you have had your phone, table or computer for under a year it may be eligible to be repaired by the company it is made by for free in some cases. However most companies do not cover, and consider your warranty void if any of the following occur, accidental damage, physical damage or water damage.

If you are unsure if a problem is covered, we are happy to let you know if we have the correct information we can direct you on how to go about getting it repaired with the manufacture. One example of something that might be covered is a faulty part i.e cameras, charging port, power button etc if the device has not incurred any accidental damage and is under 1 year old. This is the general product warranty.

John Price, first off it"s water damaged so no Apple will not repair/replace it for free. Second, as with any other liquid immersed device you need to follow a few steps for proper trouble shooting.

The very first step I would take is to disassemble your phone. Use this teardown to help you disassemble your phone. Take a careful and close look at all components and connectors. Truly assess the damage. Look for major corrosion, evaluate the pins in the connectors etc,. Take a look at all connectors as well as cable ends. You will have to remove all the EMI shields. If you do not remove the shields, you are not cleaning the board. Once you got the gross contamination cleaned, use 90%+ isopropyl alcohol and clean your parts some more. For a proper cleaning, use this guide. It was written for a Apple iPhone 3G but it is still pertinent to your phone as well. I can not stress the importance of a good cleaning enough, so do it over and over while replacing the alcohol after each cleaning. Do not use compressed air for the cleaning since that can drive liquid as well as corrosion particles into areas that will cause trouble later on. Do not use drinking water, if you need to use water, use sterile water. Also, you do not need to leave it to dry for a day. Isopropyl alcohol in the higher concentration will evaporate quickly and dissipate the water. The importance here is the cleaning. It would of course be best to get it professionally cleaned Do not forget to replace the battery. This is a must and not an option. It will fail if you do not take care of it now. After that reassemble your phone and re-evaluate. For as long as you have not cleaned your board and replaced the battery, everything is just a guess. Keep in mind that water damage is the hardest to troubleshoot and to repair. Hope this helps, good luck.

Physical damageIf your device has physical damage, check with the manufacturer. Some manufacturers may exchange or repair your device. Or, if you have an AT&T Pre-Owned device that you bought online from us, and it has a cosmetic blemish, it might be covered.

Otherwise, if your device has any of these types of damage, it won’t be covered by the manufacturer’s warranty. If you return a device with any of these signs, we’ll charge you the total sales price of the replacement device. Plus, we’ll return your damaged device to you. See physical damage examples (PDF, 357KB)

Have an Apple® device? Go to Apple Support. Liquid damage to iPhones or iPods isn‘t covered by warranty. We don’t support warranty exchange of Apple products.

If you return a device with a liquid damage indicator that’s triggered, missing, or damaged, we’ll charge you the total sales price of the replacement device. We’ll also return your damaged device to you. See examples of liquid damage indicators (PDF, 208KB)

If it has physical or liquid damage and the device manufacturer won’t exchange or repair it, the damaged device isn’t covered by a warranty. You might be able to file a device protection claim or upgrade your phone or device.

One of the biggest enemies of electronic devices is moisture. Unfortunately, given the ever-increasing portability and popularity of smartphones, music players, cameras and tablet PCs, it seems all but certain that each of your vital tech tools will one day have a devastating encounter with H2O.

But all may not be lost even after your cell phone takes that free-fall into the toilet, or your iPod goes through the washing machine in the back pocket of your favorite jeans. There’s a chance — about 70 percent — that you’ll be able to completely dry the device and put it back to work within hours. In most cases, it won’t be quick, and you’ll have to be willing to make a bit of a mess. But you could save yourself a trip to the electronics store for a replacement.

Although drying procedures for smartphones, music players, cameras and tablet PCs vary in certain ways, for the most part you would follow the same process for any of them upon major contact with water or other liquid:

Remove the battery.As the power source, this is more likely to be damaged by water than the actual device, especially if the item was on when contact was made with the water.

Remove the memory and SIM cards if possible.Because in many cases your data is stored on these instead of the actual computer or phone, you’ll probably want to protect them as much as possible. Fortunately, they’re fairly durable, so you’ll be able to dry them initially with a cloth towel, then let them air dry for a day before reinserting.

Remove any peripherals and set them aside to air-dry. This is especially true for very small devices as there’s not a lot you can do beyond this. Headphones, in particular, are tiny, but extremely water resistant, even capable of surviving multiple trips through a washing machine and dryer.

Look for signs of water damage. In the case of phones, manufacturers have placed a liquid damage indicator on the inside near where the battery sits. It’s normally a clear or striped pattern; if it’s a solid color (usually red or pink), you may have water damage.

Pat-dry the outside. Use a soft cloth towel to dry off the exterior of the unit. Do not use the towel on any lenses or screens as this can scratch them if dirt or sand particles are in the towel fibers. Instead, use a lens or microfiber cloth for these items.

Use a vacuum cleaner or hand vac if possible.This will draw residual moisture away from the circuitry. But don’t hold the vacuum too close or you’ll risk generating static electricity that could damage the device.

Try a can of compressed air. Carefully spray with the can straight up to release only air, not the freezing liquid. Aim it at the keys, crevices, microphone, speaker and any other openings to force excess liquid out.

Use “gentle heat.”You can speed up the drying process by putting the device in a location that gets a moderate amount of heat, such as near a television or the dashboard of your car. Do not place the battery on a warm device. Do not use high or direct heat such as from a hair dryer or in the oven as this will damage the unit (especially the LCD screen).

To check battery damage, try cleaning the battery connections with a cloth dampened with a light rubbing alcohol solution. Wait several hours for it to completely dry before reinserting the battery and trying again to turn the unit on. Do not turn the unit on if you still smell rubbing alcohol.

You may notice discolored areas on the LCD screen to your camera or smartphone. If you’re lucky, it’s an indicator that there’s still some water in the unit. The device is safe to use at this point, however. If the screen does not return to normal within a couple days of use, you have permanent damage.

If the unit powers up but isn’t acting 100 percent normal, odds are there is still some water inside the unit. The device should not be used. Resume drying activities as noted earlier or perform the following::

A last-ditch effort is to take the unit apart. This is only recommended for basic cell phones, and only if you are 100 percent comfortable with disassembling the device. Note that opening the unit up invalidates any warranty that may exist. Keep careful track of where all the pieces go as you disassemble. Pat-dry each piece with a soft cloth, then reassemble and try again.

It never hurts to prepare for the worst, especially when it comes to protecting your electronics against unexpected moisture. There are several ways to waterproof your technology “just in case:”

Buy a waterproof case or bag. This sounds obvious, yet many people forget that the carrier their phone or laptop came in may not be designed for submersion. Cases tend to come in three categories: standard, rugged and heavy-duty. Keep an eye on the submersion factor, a gauge of how many feet underwater the case will stay waterproof for at least 10 minutes. Standard items tend to survive only a few feet; heavy duty can tolerate 100 feet or more.

Opt for a waterproof product. If you haven’t bought your electronic device yet, carefully consider this option. Cameras, in particular, offer a lot of choice in this department. Expect, however, to pay 10 percent to 20 percent more for the water-resistant of the device.

Use zippered plastic storage bags.This truly low-tech option keeps your device safe from water and other environmental hazards such as sand, dirt or dust while still giving you full use of the keys. Not a great option for larger units such as tablets or laptops as they don’t make bags big enough. The idea is to keep the phone or music player in the bag until you need it, but you can operate the device from within if need be. In this case, forget about using external mics or headphones and prepare for a lot of background noise as the bag shifts while you talk on the phone. Even without the background noise, sound quality through the bag will still be marginal.

Go for custom-fit bags. For a slightly improved experience, try a product that is designed to snugly fit your phone and allow you to keep it in the bag while talking.The same restriction applies to the use of headphones and other externals, but at least your audio will be more efficient.

Vacuum seal your device.A step up from mere zippered bags are products that offer special-fit, airtight bags designed specifically for iPod, iPhone, iPad, Android, Kindle and similar products. These items leave the headset/headphone jack available for easy access, and are reportedly waterproof in many cases for at least 10 feet under water, but can cost $60 or more, which can seem pricey compared to a $2 plastic bag.

Put on an “invisible shield.” You may have seen these products in kiosks at shopping malls as well as on television: a plastic, custom-fit cover that is glued to your phone, laptop, camera, e-reader or other device. Designed primarily to resist scratching, it does offer some protection against moisture such as raindrops or sweat. But it won’t be as effective if your camera ends up in a water fountain, for example.

Waterproof the device. If you decide after purchase that having a waterproof item is a good thing, you can manually safeguard against moisture with paint-on nano-coating products that claim to be undetectable once applied and offer protection for the life of the device.

As mobile phone displays are much tougher than they used to be, it seems like they"re indestructible. Sadly, they"re not. Dropping your phone can often break the display. Your phone can no longer be considered useful.

Cracked your mobile phone display? Dropped it in the street, or crushed it playing football? Sat on it, even? You know by now that you"ve given yourself a headache. Can the phone be repaired, and if so, what are the costs?

Many services available online and locally will repair your mobile phone, for a price. But if you have access to the parts and they"re inexpensive, why not perform the procedure yourself?

You should also consider the non-monetary costs: time spent without a phone, data that needs archiving from the device. Hopefully your mobile platform"s cloud service can help here, or perhaps a desktop utility can check the phone"s contents.

Fitting a new display that costs the same as a replacement phone is pointless. However, if replacing the mobile phone screen is closer to $15, it makes sense to have a go yourself.

The most obvious location for a replacement display is eBay. Simply searching for the mobile phone model and the word display will turn up the required parts. Just remember to shop safely when using eBay.

Amazon is also a resource for replacement screens, but you should also consider a general Google search as this will turn up specialist suppliers who might be able to provide a lower price.

Note that you may find listings that offer just the display, versus listings with half the phone"s chassis. Which one you buy depends on how complicated you want things to get. For example, just the display means melting the adhesive using a heatgun or hairdryer.

Alternatively, a replacement display kit that includes half the phone"s body will require components being transferred from the old body into the replacement.

These tools are included to remove the case and unscrew any components that obstruct replacing the display. For example, a mobile phone will have Torx screws under the battery cover that will need removing before you gently prize the case apart.

There are so many different mobile phone models on the market (either new or used) that providing a standardized guide is next to impossible. Additionally, some models cannot be repaired without sending them back to the manufacturer.

These are often threaded through the different layers of hardware within the phone. Ribbon cables are delicate; easily broken, take care as damage to these could change the dynamic of the repair considerably.

Persuading your phone"s display to part with the body isn"t usually difficult. Pushing through the camera hole against the glass to begin with, slowly prize the glass display away from the body.

In this case, you won"t need to remove the display, but you will need to remove components (and even the motherboard) from the damaged device into the new body.

Narrow rolls of replacement adhesive can be bought online. Have some double-sided sticky tape laying around? Cut this into narrow 1 mm slivers, then apply the adhesive to the phone"s frame, rather than the glass.

Reconnect the relevant cables, locking them down where necessary. Place the components back in the case with care, checking that there are no cables or screws left over. Test the phone to check that it works.

The moment of truth: does the new screen work? Remember, a touchscreen display has two purposes: touch interaction, and displaying the phone"s operating system.

However, it isn"t always plain sailing. I"ve fitted a replacement display that caused the phone to overheat. Therefore, it is important to buy components from reputable sellers, and ensure you"re buying the right parts for your phone.

Here"s another tech problem you can solve yourself with a bit of time and effort: phone display flickering. And if you drop your phone into the water, don"t panic, follow these tips to help save it.

This article was co-authored by Linh Le and by wikiHow staff writer, Nicole Levine, MFA. Linh Le is a Certified Mobile Repair Specialist and the Owner of SC Mobile Repairs in San Clemente, California. With more than 12 years of experience, he specializes in smartphone, tablet, and smartwatch hardware repair. Linh has an iTech Mobile Device Repair Certification and an iOS Certification. He holds a Bachelor’s degree from The Franciscan University of Steubenville.