direct lit va lcd panel price

Modern LCD TVs rely on LED backlighting to produce the visuals you see on the screen. But their picture quality and price can differ based on their backlighting system. So, what are these backlighting systems, and how are they different?

LCD TVs can be grouped into three categories based on the type of LED backlighting system: Direct-lit, edge-lit, and full-array. As the name suggests, direct-lit TVs feature a panel of LEDs placed directly behind the display stack. Full-array TVs have a similar LED placement, but the number of LEDs is significantly more, and these LEDs are divided into different zones. But unlike both direct-lit and full-array TVs, edge-lit TVs have LEDs on the perimeter, and depending on the TV, these LEDs may or may not be grouped into multiple zones.

The LED backlight zones in full array and edge-lit TVs are significant as they enable the manufacturers to implement a feature called local dimming. It allows TVs to control the backlight on a scene-by-scene basis. So the TV can turn off LED backlighting in parts of the screen where it’s supposed to be darker while keeping other parts lit. As a result, LCD TVs with local dimming can produce deep, uniform blacks and have a better contrast ratio than the LCD TVs that don’t have this feature.

Direct lighting is the newest of the three types backlighting in LCD TVs. The first commercial direct-lit LCD TVs emerged around 2012 and are essentially an off-shoot of the full-array TVs.

As direct-lit TVs require fewer LEDs and no backlight control, they are cheaper to produce and thus typically limited to the entry-level and mid-range segments of a TV manufacturer’s portfolio.

But, the lower number of LEDs also means they have to be placed farther away from the screen to offer sufficient light coverage across the panel. As a result, direct-lit TVs are usually thicker than TVs with other backlighting systems.

Additionally, the lack of backlight control limits the contrast ratio of direct-lit LCD TVs to the native contrast ratio of the panel. So if a direct-lit TV uses a VA-type LCD panel, it will have a reasonable contrast ratio, but TVs with IPS-type panels have a poor contrast ratio.

Sony X85J is a direct-lit 4K LCD TV. It uses a VA-type panel and comes with features like HDMI 2.1 ports, VRR support, and Android TV operating system.

Edge LED backlighting first appeared in TVs in 2008, allowing for a thinner profile than LCD TVs with other backlighting solutions. But as the LEDs are placed on the rim of the screen, edge-lit TVs require a diffuser to light up the entire display adequately. This adds to their cost, making them slightly more expensive than direct-lit TVs. But given that backlighting is just one part of an LCD TV’s cost, you will find both cheap and costly edge-lit TVs on the market.

Some edge-lit TVs also come with local dimming support. But the number of backlight zones is typically far lower than in full-array TVs, and the individual LEDs are responsible for lighting up entire columns of the screen. So edge-lit local dimming is much less precise, and the benefit in terms of contrast ratio is minimal.

Full-array TVs have the best backlight implementation among LCD TVs. Not only do these TVs have a large number of LEDs, but the LEDs are also divided into multiple zones for dynamic backlight control. So, depending on the number of backlight zones and local dimming implementation, full-array TVs can have modest to excellent improvement over the native contrast ratio of the LCD panel.

Unfortunately, LCD TVs with full-array local dimming can also suffer from various screen artifacts, such as blooming and black crush, depending on the number of backlight zones and the overall local dimming implementation.

The Samsung QN90A is one of the best LCD TVs on the market and it uses full-array local dimming. The TV has 4K resolution, HDMI 2.1 port, and a 120Hz VA-type panel.

If you are shopping for a new TV and curious about its backlighting system, you can consult the TV’s specifications. Manufacturers generally mention whether an LCD TV is direct lit, edge lit, or full array. In the case of full-array TVs, the number of local dimming or backlight control zones is also listed in the TV’s specifications. This number is usually different for different sizes of a particular TV and can impact the amount of contrast ratio gain you can expect.

OLED TVs are self-emissive and don’t need a backlight, unlike LCD TVs. Instead, each pixel of an OLED panel can generate its own light and be switched off to display the perfect black color. So, OLED TVs essentially offer pixel-level local dimming. As a result, they have a near-infinite contrast ratio and are generally considered to have the best picture quality. But they are also typically more expensive than LCD TVs and can suffer from burn-in.

All-in-all, the backlight system of an LCD TV can impact its picture performance. And if you are shopping for a new TV, full-array TVs generally have the best picture quality. But if you are restricted by your budget, direct and edge-lit TVs can also deliver good visual performance. But make sure to read expert reviews to get a better idea about the overall quality of a particular television.

Screens are more than just the flat color panel that we see in the end. There are a few different pieces stacked behind that image. Besides OLED panels, LCD and LED panels have backlights, a polarizer, TFT glass, liquid crystal, a color filter, and a polarized layer.

While each type of backlighting uses a different light source, they have to be arranged in a particular way to properly direct the light into the color filter and through the other layers. The main three arrangements are called Edge-Lit, Direct-lit, and Full Array.

Direct-lit backlighting is when LED lighting is used across the back panel of the TV. It is placed directly behind the LCD panel and provides a uniform light across the screen. It provides a much brighter picture due to heavy LED use. Unfortunately, all that extra light can make darker shades too bright. In some cases, black sections of the screen can appear to be grey. This is a phenomenon known as “elevated black levels”.

Wide-screen formatted films with letterboxing can make the elevated black levels incredibly apparent. As the entire backlight panel is controlled by a single command, there is no way to eliminate the grey tones created in what’s supposed to be black space. As direct-lit arrangements were created as the first step from CCFL to LED backlights, it was a problem that just came with the territory. Which inspired the creation of full array of LED arrangements.

In order to combat the elevated black levels of direct-lit panels, LED backlighting using a full array with local dimming (FALD) was created. It breaks up the LED backlight panel into several zones. Each section or zone is responsible for only a portion of the screen’s backlighting. This allows for areas to have local dimming or brightening.

The idea behind providing local dimming was to further increase the contrast and provide deeper shadows, brighter highlights, and more vivid color. The shadows and dark sections of movies stop being grey blocks and match the rest of the image better. FALD TVs are the best arrangement for LCD/LED TVs compared to edge-lit and direct-lit. It provides the benefits of a full light source and evens out the darker areas of the screen to prevent elevated black levels.

Full Array and Direct-Lit backlights are placed behind the LCD panel to provide the television lighting. As Full Array is an improved and refined version of Direct Lit, it provides a better image with more vivid colors and higher contrast.

Direct-Lit panels use a simple array of LED lighting that provides a uniform light across the LCD panel in the television. This is great for color and viewing angles, but it has no ability to increase color contrasts aside from dimming the entire backlight.

Full Array backlights are made with sections of LED lights across the entire panel that is controlled dynamically to provide high brightness contrast and even more vivid colors. It completely removes the elevated black levels that plague direct-lit televisions.

During the switch from CCFL to LED backlighting, direct-lit arrangements were created as the first step. A simple set up of LED lights all controlled as one to provide consistently bright light to the LCD panel. At first, the transition was such an improvement that most were happy with the new backlighting. It didn’t take long for enthusiasts and home theatre hobbyists to spot that black tones were hard to achieve. The elevated black levels were just too grey.

That’s when the idea to section the LEDs into separately controllable sections came into being. It allowed for portions of the screen to be locally dimmed which changed the heavily lit greys back into the darker black shades they were intended to be. The new arrangement was called a full array with local dimming. Today, full arrays are still among the most expensive televisions aside from QLED/OLEDs.

Direct-lit is still used to create a cheaper option, but manufacturers also make use of an arrangement known as edge-lit to achieve the same cost as a direct-lit panel without suffering elevated black levels. Unfortunately, Edge-Lit backlighting suffers from a lack of color vividness compared to full array and direct-lit panels.

LED-backlit LCD, which uses light-emitting diodes for backlighting is a common type of display on televisions and laptops. Unlike pure LED screens these LCDs are not self-illuminating and are reliant on the backlighting for illuminating the display. It is an advancement on the preceding cold cathode fluorescent technology and some manufacturers and retailers may advertise this type of screen as an LED TV.

In this article, we are going to look at the importance of the arrangement of this lighting, rather than the type, as this is crucial for how light is directed into color filters and other critical layers. The three arrangements available are:

Edge-lit is a type of screen backlighting that has LED lights lining either the top and bottom edges of the screen or the perimeter of the screen. This form of backlighting differs from others as the screen is not lit from behind, and often produces a more muted effect. An opaque piece of plastic called a diffuser light guide distributes the lighting across the rear of an LCD panel.

Edge-lit LEDs can be individually brightened or dimmed to provide the high degree of backlight control that screened content demands. Edge-lit screens can achieve this in one of two ways:

Direct-lit backlighting uses LED lighting across a television back panel. This form of backlighting initially used Cold Cathode Fluorescent Lamps (CCFLs) before transitioning to LED. The lighting is behind the LCD panel to provide consistent lighting across the entire screen.

The use of LEDs creates an extremely bright picture. This can lead to black and naturally dark tones appearing too bright, a phenomenon known as ‘elevated black levels’. This appearance can really affect wide-screed films, especially as there is no way to alter the backlight of specific portions of the screen. This has led to the development of alternative backlighting arrangements that minimize the greying of black sections of the screen.

Both types of backlighting provide the illumination LED screens required to produce a visible image. The main difference is that direct-lit backlights sit behind the LCD panel to provide the necessary lighting whereas edge-lit screens have LEDs sitting at the perimeter of the screen. Here are some other notable differences:

The first generation of LED backlighting was edge-lit. However, this early form of edge-lit technology caused the development of hotspots on the screen and the overall lighting was inadequate. As LED design became more efficient and effective, Samsung revisited this type of backlighting with a market-leading edge-lit LED television in 2009.

Direct-lit panels use a simple array of LEDs to provide uniform lighting across an entire LCD panel. The adoption of direct-lit screen technology in the 2000s was driven by the availability of white LEDs that could replace existing CCFL technology.

Direct-lit performs across a range of viewing angles and colors, but it is limited by not being able to increase contrast, as the entire backlight has to be dimmed to change color intensity. This affects the ability of a screen to achieve a deep black tone. Full array lighting and flexible backlight technologies have superseded direct-lit lighting. They are more advanced and can achieve more nuanced imaging effects.

Edge Lit screens can achieve full, deep blacks as they can use local dimming technology to reduce lighting in areas of the screen that display black or dark colors.

*Purchase an eligible 70” or larger LG TV and receive free Wall mounting by Handy ($164.99 value). Savings will be reflected in the cart when all offer requirements are met. If any of the qualifying items are removed from the cart, returned or part of the order is cancelled, the promotional savings will be void. Handy wall mounting service must be added to the original TV order and is not redeemable separately. Wall mounting by Handy includes installation of TV mounting bracket, mounting of TV and load testing the hardware. Wall mount not included and must be purchased separately (unless noted for the OLED G series). Prices and offers are non-redeemable for cash and non-transferable. Available only on LG.com from January 22, 2023 through February 12, 2023. Availability, prices and terms of offer are subject to change without notice. [Click here for Handy full terms: LG + Handy.]

*Purchase an eligible TV and sound bar bundle package in a single transaction on LG.com and receive instant additional savings of up to $200 off the pre-tax sale price of the combined purchase of the TV and sound bar. Savings will be reflected in the cart when all offer requirements are met. If any of the qualifying items are removed from the cart, returned or part of the order is cancelled, the promotional savings will be void. TV and sound bar purchase must be in the same order. Amount of savings depend on the qualifying sound bar model purchased with the qualifying TVs. Prices and offers are non-redeemable for cash, non-transferable and may not be combined with other offers/discounts. Availability, prices and terms of offer are subject to change without notice.

Prices, promotions and availability may vary by model, store, and online. Prices subject to change without notice. Quantities are limited. Check with your local retailers for their final price and availability.

At LG USA,we create consumer electronics and home appliances to improve and innovate your home. Whether that means cooking a nutritious, delicious meal for your family with the latest kitchen technology, staying connected to creative projects on your LG gram laptop, watching a movie with your kids on an LG OLED TV or creating a modern, comfortable place to celebrate the moments that matter, LG electronics are there for you every step of the way.

LG Home Appliances feature modernly designed ranges and ovens, microwaves, cooktops, vacuums, washers, dryers, air conditioners, air purifiers and dishwashers. Upgrade your home applianceswith new technology from LG USAto cook healthy, delicious meals more efficiently, clean your dishes faster, do more laundry in less time, and even clean and cool your house so you can enjoy a comfortable space all year long.

Explore LG products to revamp and refresh your home on LG.com. Purchase modern appliances and smart home technology solutions from LG.com US and enjoy LG customer support like options for delivery, pickup, product registration, installation, customer service, and more.

LCD panels are backlit by LED lights, so they rely on a backlight behind the panel to make the picture visible, and the LCD layer can"t prevent all light from escaping out of the screen. This means that even in a black scene, the backlight is still on, and some light escapes, causing blacks to appear gray.

Contrast/Brightness: These settings aim to improve the contrast ratio by tinkering with the white and black levels. It doesn"t have a direct effect on the local dimming but can improve the picture quality. The contrast setting increases the luminosity of the brightest whites, while brightness (sometimes called black level), makes blacks darker. Keep in mind the brightness setting on some TVs controls the backlight, which doesn"t affect picture quality.

Frame dimming: Frame dimming, or CE dimming on Samsung TVs, is a basic version of local dimming, but it dims the entire backlight instead of zones. Usually found on edge-lit TVs, it causes small highlights to become dim as well. It may improve the contrast a bit, but it"s not very useful for most scenes.

Local dimming features on LED TVs are a way to improve the contrast ratio. Since these TVs consist of LED backlights behind an LCD panel, local dimming aims to turn off, or dim, certain zones of the LED backlight, making blacks look darker and highlights brighter. However, there may be some issues with local dimming on some TVs as it could cause blooming around bright objects or for entire zones to light up when there"s a small object. Overall, most local dimming features on modern TV do an effective job at improving the picture quality in dark scenes, and only some lower-end models will have glaring problems.

Many TVs use LCD (Liquid Crystal Display) panels that are lit by LED backlights. There are two popular types of LCD panels: In-Plane Switching (IPS) and Vertical Alignment (VA), and there are two main differences between each type. A VA panel usually has a high contrast ratio and narrow viewing angles. However, an IPS panel has low contrast and wide viewing angles. These are the main differences between each, and for the most part, panel type doesn"t affect other aspects of picture quality, like peak brightness, color gamut, or color accuracy.

For the purposes of this article, we"re going to compare two LED-backlit LCD TVs: the Sony X800H, which has an IPS panel, and the Hisense H9G, which has a VA panel. Due to their different panel types, there are three noticeable differences in picture quality: viewing angles, contrast, and black uniformity, so we"re going to look at each one.

Viewing angle refers to the angle at which you can watch the TV without seeing a noticeable drop in picture quality. IPS TVs are the clear winner here, as the image remains accurate when viewing from the side - you can see the differences in the videos above. This is their main advantage over VA panels. Most VA panel TVs have a noticeable loss in image accuracy when viewing from the side. The narrow viewing angle of VA-type TVs is also problematic when the TV is used as a PC monitor from up close since the edges of the display look washed out.

Contrast ratio is one of the most important factors when it comes to picture quality. It determines how well a TV displays blacks, so one with a good contrast displays deep blacks when viewed in the dark. However, if your TV has a low contrast ratio, you"ll notice that blacks look gray when viewed in the dark.

VA panels are far superior to IPS panels when it comes to this, so if you tend to watch movies in the dark, you likely want to get a TV with a VA panel. Most TVs use VA panels due to this main advantage, and high-end models may have a local dimming feature that further enhances black levels. On the other hand, IPS panels normally have low contrast, so blacks look closer to gray, but you may not notice the difference in contrast in bright environments.

Our black uniformity tests determine how well a TV displays a dark scene with a bright image in the center. Ideally, you want to see a completely black screen with the center cross being the only part that"s lit up, and this is important for people watching movies. No LED TV has perfect uniformity, and unlike viewing angles and contrast, the panel type doesn"t completely determine its black uniformity. However, most VA panels that we"ve tested have good black uniformity, while most IPS panels have sub-par black uniformity. This doesn"t mean that every VA panel TV has good uniformity, as this can change between units, and you can also improve uniformity using the local dimming feature.

LCDs function by having liquid crystals in little groups to form the pixels. These crystals react and change position when charged with electricity and, depending on their position, they allow a certain color of light to pass through.

IPS displays have their crystals aligned horizontally at all times. When charged, they turn to allow light through. VA displays have their crystals aligned vertically. When charged, they move to a horizontal position, allowing light through. When current isn"t sent through them, however, their vertical alignment blocks light far more efficiently, creating better blacks and giving better contrast.

There"s also another type of IPS panel, called Plane-to-Line Switching (PLS), which can be seen with the Sony X800H. This panel type was designed by Samsung and technically performs the same as an IPS panel. When you compare the pixels visually, IPS panels look like chevrons, VA looks like very straight rectangles, and PLS looks like round-edged capsules. You can learn more about pixels here.

The way the pixels are laid out can also affect text clarity. Many IPS panels, like the ones on the Sony X800H or the LG SK9000, use RGB sub-pixel layouts, while many VA panels have a BGR layout, like on the Hisense H9G. The sub-pixel layout doesn"t directly affect picture quality unless you"re using it as a PC monitor. Some applications may expect an RGB layout, so if you have a BGR sub-pixel layout, text may not look clear. You may need to increase the text scaling to read it properly, but this issue isn"t common with an RGB layout. You can learn more about it here.

TV manufacturers have come up with ways to improve LED TVs to increase picture quality. There are competing technologies, like OLED, which also present their own unique characteristics.

Unlike LED TVs, OLEDs don"t use a backlight and instead have self-emitting pixels. This allows the pixels to individually turn on and off, resulting in perfect blacks. This means that they also have perfect black uniformity as there"s no blooming around bright objects like on some LED TVs. They also have wide viewing angles, sometimes even wider than some IPS panels, so OLEDs are a good choice for wide seating arrangements.

However, the one major downside to OLEDs compared to LEDs is their risk of permanent burn-in. This could be problematic if you constantly watch content with static elements, like the news, or if you use it as a PC monitor. We don"t expect it to be an issue for people who watch varied content, but if you"re truly worried about it, LED TVs appear to be immune to burn-in.

Samsung released quantum dot TVs in 2015, which they later labeled as QLED in 2017. These TVs include a quantum dot layer between the LED backlights and the LCD panel to achieve a wider color gamut. Other companies like Vizio and TCL also use this quantum dot technology on their TVs. Adding this extra quantum dot layer doesn"t change the characteristics of the panel type; the VA panel on the TCL 6 Series/S635 2020 QLED still has a high contrast ratio and narrow viewing angles. Although most QLED TVs use VA panels, you can easily use an IPS panel as well.

Manufacturers have tried different techniques to improve the viewing angles on VA panels over the years, aiming to produce a perfect LCD panel with both wide viewing angles and high contrast. While they have yet to achieve that goal, a few TVs have hit the market that try to combine the best of both panel types. The first TVs with this viewing angle technology came out in 2018, and only a few high-end models like the Samsung Q90/Q90T QLED and the Sony X950H had this technology in 2020. These TVs are a bit unique, delivering noticeably better viewing angles than their pure VA counterparts, but still worse than true IPS panels. This comes at the expense of a lower contrast ratio, as these TVs have worse native contrast than most VA panels, but they"re still better than IPS panels. Combined with their local dimming features, they still produce deep blacks.

Between IPS and VA panels, neither technology is inherently superior to the other as they both serve different purposes. In general, IPS TVs have wide viewing angles suitable for when you want to watch the big game or your favorite show in a large seating arrangement. They"re also beneficial for use as a PC monitor since the edges remain accurate if you sit up close. However, VA panels are a better choice for watching content in dark rooms, as their improved contrast allows them to display deep blacks. Choosing between the two is a series of trade-offs and qualities, so choosing the best TV for your needs depends on your usage.

In this succinct guide, we"ll provide a brief overview of common initialisms found in the world of TV, PC monitor, and laptop displays. To keep things simple, we"ll focus on how each technology impacts expected image quality. Whether you"re looking for a handy refresher for the next time you"re shopping or a quick, digestible guide to give to inquisitive friends and family, we"ve got you covered.

You"re likely reading this article on a liquid crystal display (LCD). "LCD" refers to any display type that uses liquid crystals, including TN, IPS, and VA (which we"ll get into shortly). Even an old-school calculator or digital watch can use an LCD. But a simple "LCD" designation doesn"t tell you how a screen will perform. You need more information, like the backlight type the panel uses—usually LED, followed by the more expensive Mini LED.

LCDs long ago ousted cathode ray tube (CRT) and plasma displays as the dominant consumer display tech. In the past, it was common to find LCDs with cold cathode fluorescent lamp (CCFL) backlights, but most LCD displays today use LED backlights (more on that below).

TN, IPS, and VA are the three primary types of LCD displays you"ll find in TVs, monitors, and laptops. They all vary in how they use their liquid crystals. Each could warrant its own article, but we"ll keep it simple here by focusing on the differences you can expect to see in real life. Advertisement

It"s easier to reach high refresh rates and low response times with TN displays, although pricier IPS and VA are catching up. It"s worth noting that the upcoming Asus ROG Swift 500 Hz Gaming Monitor, which should be the fastest monitor on the market, purportedly achieves its refresh rate via an "E-TN" panel that claims 60 percent better response times than regular TN. So while you can buy a supremely fast IPS (up to 360 Hz) or VA monitor, TN is still the technology pushing the limits of refresh rates.

VA panels excel in contrast, which is often considered the most important factor in image quality. VA monitors commonly have contrasts of 3,000:1, while a typical IPS comes in at 1,000:1. IPS Black displays, which started coming out this year, claim to double the contrast of typical IPS monitors to up to 2,000:1. We reviewed the IPS Black-equipped Dell UltraSharp U2723QE, and the difference was noticeable.

When it comes todisplay technologies such asprojectorsand panels, factors such as resolution and refresh rate are often discussed. But the underlying technology is equally, if not more, important. There are tons of different types of screens, from OLED and LED to TN, VA, and IPS. Learn about the various monitor and television types, from operation to pros and cons!

The most common form of monitor or TV on the market is LCD or Liquid Crystal Display. As the name suggests, LCDs use liquid crystals that alter the light to generate a specific colour. So some form of backlighting is necessary. Often, it’s LED lighting. But there are multiple forms of backlighting.

LCDs have utilized CCFLs or cold cathode fluorescent lamps. An LCD panel lit with CCFL backlighting benefits from extremely uniform illumination for a pretty even level of brightness across the entire screen. However, this comes at the expense of picture quality. Unlike an LED TV, cold cathode fluorescent lamp LCD monitors lack dimming capabilities. Since the brightness level is even throughout the entire array, a darker portion of scenes might look overly lit or washed out. While that might not be as obvious in a room filled with ambient light, under ideal movie-watching conditions, or in a dark room, it’s noticeable. LED TVs have mostly replaced CCFL.

An LCD panel is transmissive rather than emissive. Composition depends on the specific form of LCD being used, but generally, pixels are made up of subpixel layers that comprise the RGB (red-green-blue) colour spectrum and control the light that passes through. A backlight is needed, and it’s usually LED for modern monitors.

Please note that some of the mentioned types may be considered a sub-category of LCD TVs; therefore, some of the names may vary depending on the manufacturer and the market.

1)Film layer that polarizes light entering2)glass substrate that dictates the dark shapes when the LCD screen is on3)Liquid crystal layer4)glass substrate that lines up with the horizontal filter5)Horizontal film filter letting light through or blocking it6)Reflective surface transmitting an image to the viewer

While many newer TVs and monitors are marketed as LED TVs, it’s sort of the same as an LCD TV. Whereas LCD refers to a display type, LED points to the backlighting in liquid crystal display instead. As such, LED TV is a subset of LCD. Rather than CCFLs, LEDs are light-emitting diodes or semiconductor light sources which generate light when a current passes through.

LED TVs boast several different benefits. Physically, LED television tends to be slimmer than CCFL-based LCD panels, and viewing angles are generally better than on non-LED LCD monitors. So if you’re at an angle, the picture remains relatively clear nonetheless. LEDs are alsoextremely long-lasting as well as more energy-efficient. As such, you can expect a lengthy lifespan and low power draw. Chances are you’ll upgrade to a new telly, or an internal part will go out far before any LEDs cease functioning.

Ultimately, the choice between LED vs VA or any other display technology will depend on your specific needs and preferences, including things like size, resolution, brightness, and colour accuracy.

Please note that some of the mentioned types may be considered a sub-category of LED TVs; therefore, some of the names may vary depending on the manufacturer and the market.

Further segmenting LED TVs down, you"ll find TN panels. A TN or twisted nematic display is a type of LED TV that offers a low-cost solution with a low response time and low input lag.

These displays are known for their high refresh rates, ranging from 100Hz to 144Hz or higher. As a result, many monitors marketed towards gamers feature TN technology. The fast response time and low input lag make them ideal for fast-paced action and gaming. However, TN panels have some limitations.

They suffer from inferior colour reproduction, meaning that the colours they display may be less accurate and vibrant than other technologies. Additionally, they have poor viewing angles, meaning the picture quality can degrade when viewed from certain angles. This is due to the way the liquid crystal molecules point at the viewer and the orientation of the light polarizers at 90-degree angles.

Overall, while TN panels are an affordable and fast option, they may not be the best choice for those looking for accurate colour reproduction and wide viewing angles.

Like TN, IPS or In-plane Switching displays are a subset of LED panels. IPS monitors tend to boast accurate colour reproduction and great viewing angles. Price is higher than on TN monitors, but in-plane switching TVs generally feature a better picture when compared with twisted nematic sets. Latency and response time can be higher on IPS monitors meaning not all are ideal for gaming.

An IPS display aligns liquid crystals in parallel for lush colours. Polarizing filters have transmission axes aligned in the same direction. Because the electrode alignment differs from TN panels, black levels, viewing angles, and colour accuracy is much better. TN liquid crystals are perpendicular.

A VA or vertical alignment monitor is a type of LED monitor that features excellent contrast ratios, colour reproduction, and viewing angles. This is achieved by using crystals that are perpendicular to the polarizers at right angles, similar to the technology used in TN monitors. VA monitors are known for their deep blacks and vibrant colours, making them popular for media consumption and gaming.

They also have better viewing angles than TN monitors, meaning that the picture quality remains consistent when viewed from different angles. However, the response time of a VA monitor is not as fast as that of a TN monitor, which can be a concern for those looking to use the monitor for fast-paced action or gaming.

The pricing of VA monitors varies, but they are typically more expensive than TN monitors and less costly than IPS or OLED monitors. Overall, VA monitors are an excellent option for those looking for a balance between good picture quality and affordability.

A quantum dot LED TV or QLED is yet another form of LED television. But it’s drastically different from other LED variants. Whereas most LED panels use a white backlight, quantum dot televisions opt for blue lights. In front of these blue LEDs sits a thin layer of quantum dots. These quantum dots in a screen glow at specific wavelengths of colour, either red, green, or blue, therefore comprising the entire RGB (red-green-blue) colour spectrum required to create a colour TV image.

QLED TV sets are thus able to achieve many more local dimming zones than other LED TVs. As opposed to uniform backlighting, local dimming zones can vary backlighting into zones for adjustable lighting to show accurate light and dark scenes. Quantum Dot displays maintain an excellent, bright image with precise colour reproduction.

Please note that some of the mentioned types may be considered a sub-category of Quantum Dot TVs; therefore, some of the names may vary depending on the manufacturer and the market. Also, it"s worth mentioning that not all brands use the same technology. Some are using QD films or QD-LEDs, others are using QD-OLEDs, and the list could go on.

An OLED or organic light-emitting diode display isn’t another variation of LED. OLEDs use negatively and positively charged ions for illuminating individual pixels. By contrast, LCD/LED TVs use a backlight that can make an unwanted glow. In OLED display, there are several layers, including a substrate, an anode, a hole injection layer, a hole transport layer, an emissive layer, a blocking layer, an electron transport layer, and a cathode. The emissive layer, comprised of an electroluminescent layer of film, is nestled between an electron-injecting cathode and an electron removal layer, the anode. OLEDs benefit from darker blacks and eschew any unwanted screen glow. Because OLED panels are made up of millions of individual subpixels, the pixels themselves emit light, and it’s, therefore, an emissive display as opposed to a transmissive technology like LCD/LED panels where a backlight is required behind the pixels themselves.

The image quality is top-notch. OLED TVs feature superb local dimming capabilities. The contrast ratio is unrivalled, even by the best of QLEDs, since pixels not used may be turned off. There’s no light bleed, black levels are incredible, excellent screen uniformity, and viewing angles don’t degrade the picture. Unfortunately, this comes at a cost. OLEDs are pricey, and the image isn’t as bright overall when compared to LED panels. For viewing in a darkened room, that’s fine, but ambient lighting isn’t ideal for OLED use.

Please note that OLED technology can be applied to various displays and devices, and the list mentioned above may not be exhaustive. Also, some types may be considered a sub-category of OLED.

As you can see, a wide variety of displays are available on the market today, each with their unique advantages and disadvantages. While many monitors and TVs are referred to by various names, such as LED, IPS, VA, TN, or QLED, many are variations of LCD panels. The specific technology used in a display, such as the colour of backlighting and the alignment of pixels, plays a major role in determining the overall picture quality.

When choosing the right type of monitor or display for your needs, it"s important to consider all the options available and weigh the pros and cons of each one. This can include things like resolution, refresh rate, response time, colour accuracy, and more subjective factors like overall picture quality and viewing angles.

Now that you better understand the various display technologies available, you can make a more informed decision when selecting the best display to fit your needs.

There are two types of LED TV - edge-lit and back-lit televisions. So what is the difference, and is it important? Find out everything you need to know.

This type of lamp has managed to produce high-quality televisions. But, there have always been disadvantages to this technology, such as poor contrast ratios and color reproduction.

Different parts of the screen can have the blocks of lights switched on or off at any time, which gives the TV a much better contrast ratio than a traditional LCD TV.

Therefore, a back-lit LED TV with local dimming produces a better picture, which helps it to create an image comparable with other TV technologies like OLED.

A downside is that the power consumption of these TVs can be greater than standard LCD or edge-lit televisions – especially those models which use RGB LEDs.

The advantage over an edge-lit TV is that the lighting will usually be more uniform across the screen – eliminating the light-pooling of edge-lit screens.

The lights in edge-lit LED televisions are placed around the perimeter of the LCD screen – and the light they emit spreads across the back of the panel using a series of ‘light guides.’

Paul started the Home Cinema Guide to help less-experienced users get the most out of today"s audio-visual technology. He has been a sound, lighting and audio-visual engineer for around 20 years. At home, he has spent more time than is probably healthy installing, configuring, testing, de-rigging, fixing, tweaking, re-installing again (and sometimes using) various pieces of hi-fi and home cinema equipment. You can find out more here.

Because OLED TVs are newer and generally more expensive, the average buyer is looking at LED/LCD TVs right now. And although there are several features and specifications to consider while shopping—the brand name, HDR compatibility, and refresh rate, just to name a few—there’s one important hardware spec that isn’t widely advertised: LCD panel type.

LED/LCD TVs are so called because of the two things that make up their displays: an LED (Light Emitting Diode) backlight and an LCD (Liquid Crystal Display) panel for that backlight to shine through. LED backlights vary between a variety of implementations, but modern LCDs generally come in one of two panel technologies: IPS (In-Plane Switching) and VA (Vertical Alignment).

Unlike other hardware specifications (which are usually listed on the side of a TV box or on the manufacturer’s website), information about a TV’s LCD panel type is a bit more inside baseball. But panel type has a far greater impact on a TV’s performance than you might expect—it affects contrast, color, and viewing angle as well.

Individual pixels in an LCD display are made up of liquid crystals activated by voltage. How the display arranges its crystals is part of what sets IPS panels apart from VA panels.

IPS (In-Plane Switching) panels are a common display type for both the best computer monitors and TVs. Without getting too far down the rabbit hole, let’s talk a little about how IPS panels distinguish themselves from other types.

Every non-OLED TV on the market today is an LCD TV powered by LED lighting. Individual pixels in an LCD display are made up of liquid crystals activated by voltage—this is what produces color. An IPS panel aligns its crystals horizontally, parallel to the glass substrate.

IPS technology was developed in part to improve the color and wide viewing angle performance of a display. There"s also a range of variations under the IPS umbrella, including ADS, S-IPS, H-IPS, e-IPS, P-IPS, and PLS (Plane-to-Line Switching). But, while they all differ marginally from one another in operation, their core functionality (as compared to VA panels) is the same.

VA (Vertical Alignment) panels represent another common display type, used for both computer monitors and TVs, but especially for the latter where they greatly outnumber their IPS counterparts. Most LED/LCD TVs you"ll find on the market use a VA panel. While IPS panels align their liquid crystals horizontally, VA panels align them—you guessed it—vertically. They run perpendicular to the glass substrate rather than parallel to it. When met with voltage, the crystals tilt, letting light through and producing color.

This positioning changes how the liquid crystals behave. Without any voltage, the liquid crystals in a VA panel do not tilt, which is a better outcome if your goal is to block light and create image depth. Like with IPS, VA panels also come in a few varieties: PVA, S-PVA, and MVA, though again, their core functionality (as compared to IPS panels) is the same.

TN (Twisted Nematic) is an older LCD display type. They"re still relatively common display types for computer monitors—thanks to their lightning fast response times and excellent handling of motion blur. TN panels aren"t typically used in TV production anymore, though.

The cornerstone of picture quality, contrast ratio refers to the range between a display’s darkest black levels and brightest highlights. Because VA-style panels excel at producing deep, dark black levels, this is arguably their biggest strength. VA panels almost always feature deeper black levels than their IPS counterparts, and this goes a long way in creating a detail-rich picture. An IPS panel can mitigate this by serving up an exceptionally bright image to offset relatively shallow black levels.

A TV’s total viewing angle describes how much a viewer can move away from an ideal, head-on viewing position before the contrast and color of the picture begins to deteriorate. Due to the positioning of their liquid crystals, IPS panels excel in this department; they typically offer significantly more viewing flexibility than TVs with VA-style panels. In other words, IPS panels are more reliable for group viewings (or any situation where a viewer might need to sit at an off-angle).

While impressive color production is possible on both display types, IPS panels tend to offer wider colors, given the nature of their hardware. While a wider range of colors tends to spell better color accuracy, the advent of additional TV technologies like quantum-dot color have evened the playing field considerably. In other words, you’re far more likely to notice the benefits of an IPS TV’s wider viewing angle than you are to notice its tendency for wider color.

Here’s the final takeaway: IPS panels are significantly better than VA panels when it comes to viewing angle and somewhat better than VA panels when it comes to color. VA panels, however, almost always offer deeper black levels and better overall contrast. And because they block light better, TVs and monitors using VA panels tend to have better backlight uniformity regardless of LED backlight type.

Unfortunately, not only is it rare to find a TV’s panel type listed on a manufacturer’s website, but it’s increasingly rare for a brand to reveal a TV’s panel type at all—even when we contact brands directly for information. The reason for this caginess has everything to do with marketing; it’s better to keep shoppers focused on the bells, whistles, and impressive performance specs of a TV rather than its potential shortcomings.

To add to the confusion, it’s common for different sizes of the same TV series to mix and match display types; you might find that the 55-inch version of a TV features a VA-style display while the 75-inch model uses IPS.

Fortunately, it’s relatively easy to determine panel type if you have the proper equipment and you know what to look for. Certain test results and viewing characteristics act as tell-tale signs. This is why my colleagues and I make a point of discussing panel type in just about every TV review we publish, and why you should make a point of reading reviews before making a purchase.

Panel type is not the end-all-be-all for LED/LCD TVs. Many other factors, most of them related to the style and intensity of the LED backlight, can have a major impact on factors like contrast, viewing angle, and color intensity. Ultimately, you need to see a TV in person (and ideally in the space it’s going to live in) to get the best idea of how well it creates an image. But by knowing the core differences of IPS vs VA LCD panels, you can at least make some good guesses before you buy.

Unlike the best gaming monitors, IPS and VA TV panels are on an even playing field. TVs with both technologies are capable of high refresh rates of 120Hz, or occasionally 240Hz (although it usually comes at a premium).

If you focus on single-player gaming, or your multiplayer gaming happens online, the excellent contrast of VA is the way to go. The most gaming benefits you’ll see will come from extra features like Variable Refresh Rate (VRR), Auto Low Latency Mode (ALLM), or cloud game capabilities.

If you’re buying a large screen and intend to host movie nights with friends and family, a TV with an IPS-style panel is far more accommodating thanks to its superior viewing angle. Just be aware that certain content—particularly dark content—won’t pop as much on account of the panel’s shallower black levels.

On the other hand, if you want the best possible picture overall, we recommend investing in a TV with a VA-style panel. They’re not always ideal candidates for group viewings, but the vast majority of the best non-OLED TVs you can buy feature this display type.

Most television companies, as well as sellers, misguide consumers by saying that this particular TV is not LCD but LED. So, first of all, we need to understand that all TVs are basically only

LCDs. What we refer to as LED is simply an update to the existing LCD panels. The panel technology is the same, however, the backlight is entirely different. Those LCDs that use LEDs as a light source are generally termed as LEDs. In short, a LED-backlight is a replacement for the uniform CCFL (Cold Cathode Fluorescent Light) backlight that previously gave LCD TVs its brightness.

Initially, there were only CCFL-backlit LCDs, but with advancement in technology, these CCFL were replaced by LEDs, as not only they dramatically reduced power consumption by over 40 percent compared to conventional CCFL-backlit LCDs, we got more control over the image quality by modulating these individual LEDs.

In the LED-backlit LCDs, LED lights can switch on and off individually, which allows the image to have greater contrast, bright whites and deep black in the same image. Thus, producing a superior picture when compared to CCFL-backlit LCDs. LCD TVs with LEDs also offer better response time in comparison to CCFL-backlit LCDs.

In the traditional LCDs, the CCFL lights were spread all across the surface behind the display screen, but there was no control over them. It means that when we switched on our TV, the entire surface behind the screen used to get illuminated by these CCFL lights that were always ON, and we were unable to control their dimming in specific areas of the screen.

Because of this, even the dark part of the picture used to be illuminated like the rest and we were unable to achieve images with convincing blacks, as light passed through the dark part of the picture and made it appear grey. In other words, the contrast of CCFL-backlit LCD panels isn’t very good. However, a plasma TV doesn’t have this problem as each pixel can light up or switch-off according to the demand of the picture.

Now coming to LCDs that use LEDs as the source of illumination, there are basically three types. One is Full-array backlighting, another is Edge-lit backlighting (ELED) and third is direct-lit LED backlights (DLED).

The term full-array is used where LEDs cover the entire back-side of the LCD panel. Full-array TVs are high-ends TVs that are heavier and often thicker, but they provide better picture quality as all parts of the screen are evenly backlit. They offer the most effective local dimming, as the LEDs are more in number and are spread over the entire back surface of the panel. The independent dimming of each LED in these TV sets helps in achieving perfect blacks. But, as they are costlier to manufacture, they are rare.

This technology allows the designing and manufacturing of exceptionally thin TV sets. Edge-lit sets also have a cost-benefit over direct, local dimming versions (DLED) as fewer LEDs are used in them. Because of which, they are power efficient too.

Direct-lit LED backlights are an offshoot of full-array backlighting, though they use significantly fewer LEDs across the back of the panel. In this technology, several rows of LEDs are placed behind the entire surface of the screen.

As the LEDs are behind the LCD panel in DLED TVs, dual modulation works far more efficiently and the TVs can have better overall brightness and contrast. Using a feature called local dimming, the LEDs are divided into a number of zones that can be individually controlled, so some portions of the backlight can be dimmed while other remain illuminated.

Direct-lit LEDs can have around 200+ LED lights arranged all over the screen in clusters. Visually it is the most impressive technology, though it’s more expensive and adds extra millimetres to the depth of the TV, these TVs have local dimming that improves the blackness of an image and produce best in class picture quality, with an exceptional contrast ratio of up to 10,000,000:1. They have the ability to implement new levels of peak light output and give superb motion reproduction. Some EDGE LEDs also stake claim to local dimming, but in these TVs, it is hardly able to bring the desired effect.

Though different brand TVs might be using the same DLED or ELED backlighting, their image quality might differ considerably depending on how many lights are used and how they are aligned. In some budget Edge-lit TVs, LEDs are aligned on only one side, either upper or lower edge of the TV panel, while others might have LEDs on both upper and lower edges of the panel. The high end TVs might even have a row of LEDs on all four edges of the panel. Some manufacturers use both Edge and Direct LED systems for LCD TVs. The best professional monitors use direct LEDs.

Though bigger brands like Sony, Samsung and LG also prefer EDGE-lit LED backlighting in their TVs, they complement it with some of their indigenously formulated technology to enhance the picture quality.

TV manufacturers lay more stress on producing TVs with ELED technology as it not only cut down upon their expenditure but allows them the liberty of producing ultra-slim TV sets that can appeal the masses with their aesthetically designed panels.

There"s an unsung hero in your living room, a piece of technology that has been steadily advancing for years, providing better and better picture quality and more immersive entertainment, and it"s one you may not even know exists. I"m talking, of course, about the backlight in your TV.

What"s a backlight? Well, it"s the light source that is situated directly behind the LCD panel of the majority of TVs. It"s what makes the screen glow, what gives bright colors their vibrancy, and increasingly, what gives dark shadows their depth.

There"s a little more to the glowing panel of an LCD TV than you might expect. The LCD panel offers the shape and color components of an image, but it doesn"t actually produce any light of its own. And without light to produce the colors we see and project the image outward to the viewer, an LCD TV wouldn"t be worth much. Enter the humble backlight.

Behind the LCD panel is a backlight, and between the backlight and the LCD panel are usually a few layers of polarized filters, backlight diffusers, and other optical layers designed to turn this collection of tech components into a sharper viewable image.

You"ll have an LCD panel to provide much of the image content, and a backlight behind it to provide the light that makes that LCD panel visible and the colors vivid. But that backlight has undergone a lot of changes over time — several just within recent years. And a lot of the improvements we"ve seen in modern TVs can be traced to the humble backlight.

But with the advent of LCD-based flat screen TVs, the need arose for illumination, and originally that meant cold cathode fluorescent lamps (CCFL), a technology that"s similar to fluorescent and neon lighting. But because these lamps generate heat that can damage a display and aren"t terrible energy-efficient, they"ve pretty much disappeared from today"s TVs.

Instead, they were replaced by one of the biggest innovations in modern TV technology: LED backlighting. With this change, TV manufacturers started calling LCD TVs with LED backlight "LED TVs" to differentiate them from the older CCFL-lit models. But with the last CCFL TVs going off the market a decade ago, it"s just as likely that TV makers have kept the LED nomenclature around to blur the distinction between LCD TVs and OLED panels, which use a very different (and largely superior) display technology.

You may not know much about the innovation of local dimming, but you"ve probably heard of the feature it enables: High dynamic range or HDR. It"s one of the best features on today"s TVs, and one we recommend paying attention to when shopping for a TV. (Check out our articles What is HDR TV, and why does it matter? and What Is Dolby Vision? to learn more.)

With local dimming zones allowing variable brightness to different sections of the display, new media includes additional metadata, beyond simple video and sound. This data describes the brightness and backlighting scheme for a given scene or frame of content. While that metadata may fall under different format names, like HDR10 or Dolby Vision, the essentials are the same — describing how those dimmable backlights should behave to produce a richer image.

There are different formats with varying degrees of granularity, but the end result is that modern media takes this additional brightness control into account, just as it would color and multi-channel sound.

But there"s a catch. Not every form of backlight offers the same level of control. As a result, not every TV has the same level of capability, even if it supports the same HDR formats.

Edge-lit displays illuminate the LCD panel by setting a row of LEDs along the top and bottom edges of a screen, or ringing the perimeter of the TV frame with LED lights. This light is then distributed across the back of the LCD panel with a special diffuser light guide, a semi-transparent sheet of plastic that allows the light from the LED in the TV bezel to illuminate a larger portion of the display.

It"s a very cost effective way to light a TV, since it uses the least amount of LEDs. It also offers some level of dynamic backlight control for HDR support. On sets that are equipped to do so, portions of the edge lighting strips can be darkened or dimmed to provide deeper blacks, or brightened to accentuate brighter portions of the screen. However, since they don"t directly light the LCD panel from behind, the effect is considerably muted when compared to other backlight technologies.

Samsung AU8000 LED 4K Smart TVSamsung"s cheapest models often feature edge lighting, and the Samsung AU8000(opens in new tab) is a prime example of this. The TV"s high contrast ratio offers pretty good clarity and sharpness, but the lack of local dimming means that HDR content won"t look as good as it should, and you"ll see some noticeable elevated black levels.

A variation on edge lighting developed by Samsung and used in some Samsung QLED TVs is called dual LED. Instead of using a single color backlight for the TV, Samsung uses a combination of cool blue and warm yellow LED lights, and alternates between them based on the content of the scene to offer a modest improvement in picture quality.

Samsung Q70T QLED TV (2020 model)Samsung uses dual LED backlight as a half-step between edge lighting and direct-lit LED backlight in it"s better affordable QLED sets, and it shows. The alternating color temperatures do offer some improvement over basic edge lighting, but the result is still a less impressive picture, even with Samsung"s impressive QLED display. Check out our full Samsung Q70T QLED TV (2020 model) review for more.

Direct lit LED backlighting uses LED lighting across the back of the TV, directly behind the LCD panel, providing a fairly uniform amount of light across the screen. It also allows for a brighter picture, since it uses more LEDs, and is able to utilize more of the light coming from those LEDs.

However, an all-white back light alone has its limitations. Because the entire LCD panel is lit uniformly, there"s little to no dynamic range offered by the display.

One common problem caused by this uniform backlight approach is that darker portions of the display are still illuminated, resulting in black portions of the screen appearing grey, a phenomenon called "elevated black levels." It"s especially noticeable on letterboxed movies, which will have a distinct unwanted glow in the black bars above and below the picture.

Toshiba C350 Fire TV (2021 model)The Toshiba C350 is one of the better Amazon Fire smart TVs we"ve reviewed, but the direct LED backlight is something of a double-edged sword. It"s better and brighter than a basic edge-lit LED backlight, and picture is better as a result, but the lack of local dimming means that – despite the TV"s support for Dolby Vision and HDR10 formats – HDR content just doesn"t look very good.

TCL 5-Series Roku TV (S535)When it comes to value in TVs, the TCL name should be one of the first things you look for. The TCL 5-Series Roku TV (S535) is a great example of this, offering a QLED screen with full-array local dimming backlight that matches some of the best mid-range TVs, but at a lower price. The result is great picture quality and solid HDR performance.

Local dimming has been further refined with the introduction of mini-LEDs. By shrinking the LED size down to about one-fifth the size – mini-LEDs measure 0.008-inch (200 microns) across – more LEDs can be packed into the backlight panel, and much smaller dimming zones to be used.

Models from Samsung, TCL, and LG all utilize mini LED backlighting for its superior performance, and the combination of mini-LED and QLED color enhancement offers some of the best TV picture quality that"s ever been available.

Samsung QN90A Neo QLED TVWhen it comes to the several TVs on the market that have mini-LED backlight, the Samsung Neo QLED takes the top spot, holding the top position among the best TVs we"ve reviewed. It"s a great TV for many reasons, but the impeccable backlight and HDR performance of the Samsung QN90A Neo QLED TV makes it one of the best LCD TVs we"ve ever seen.

Ultimately, the best backlight is no backlight at all. This can be achieved in one of two ways: With current OLED displays or micro-LED technology, the latter of which isn"t yet available to regular consumers.

OLED displays have individual pixels that light up without the need for a separate illumination source, creating a self-emissive display panel that doesn"t need any sort of backlight.

Sony Bravia XR A80J OLED TVSony"s excellent OLED TVs highlight how awesome OLED can really be, with category-leading picture quality and cutting edge technologies that make the most of the premium TV technology. The Editor"s Choice Sony Bravia XR A80J OLED TV does this in spades, providing an excellent premium OLED experience.

Samsung MicroLED TVKnown for a long time as simply "The Wall" Samsung"s first micro-LED TVs are coming this year, and are available for pre-order… in Korea. We"ve seen these displays in person, and they are astonishingly good, but between the wall-sized screens necessary for 4K resolution and the mortgage-sized price tag, it may be several years before this is a viable technology for the average TV shopper.

And there"s a direct relationship between backlight quality and TV price, so what is the best option when you don"t want to pay an extra $1,000 for the category-leading quality of OLED – even the affordable Vizio OLED TV is $1,199(opens in new tab) – or shell out tens of thousands for a giant micro-LED TV?

For most people, we recommend looking for a TV with mini-LED, like the Editor"s Choice Samsung Neo QLED QN90A, or the more affordable TCL 6-Series Roku TV (R635). Mini LED backlighting hits the sweet spot for affordability and improved backlight performance. If you want better than average backlight control without spending the extra money for an old TV, a mini LED TV is the way to go.Our favorite TVs

The Hisense U8H matches the excellent brightness and color performance of much pricier LCD TVs, and its Google TV smart platform is a welcome addition. But it’s available in only three screen sizes.

The Hisense U8H is