macbook air lcd screen factory

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

The current out-of-warranty battery service fee will apply until the end of February 2023. Effective March 1, 2023, the out-of-warranty battery service fee will be increased by $30 for all MacBook Air models and by $50 for all MacBook and MacBook Pro models except for MacBook Pro (14-inch, 2023) and MacBook Pro (16-inch, 2023).

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

Laptop Screens & LCD Panels└ Laptop Replacement Parts└ Computer Components & Parts└ Computers/Tablets & NetworkingAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

A blank screen (black, blue, or gray) should appear once or more during startup. If you see your MacBook Pro booting black screen, something might be a miss.

A lack of any sign of activity on your MacBook Pro screen is perhaps one of the most worrying issues you can face when booting up your device. You"re likely to immediately start to worry about how much it will cost to fix, but let"s not panic yet. Take a deep breath, and try the tips below before you fork out for a repair or take a trip to your nearest Apple Authorised Service Provider or store.

Nothing can cause panic during the system booting of a Mac, like a screen completely going black. Should you encounter a MackBook black screen while rebooting your MacBook Pro, the following could be the causes:

But these are not the only reasons. A motherboard failure can cause some unknown reasons. Depending on the age and model of your Mac computer (Be it a Mac mini, iMac, MacBook Air, or a MacBook Pro), except for the black screen of death, you might see a blank, gray, or blue screen.

The only accessories that should be connected to your Mac when you try to solve the black screen on Mac issue should be the charging cable and adapter.

If you"ve confirmed that the laptop is receiving power and you"ve ruled out the possibility of interference from peripheral devices, the next thing to try is a simple restart. Pressing Control + Command (the symbol with four loops) + Power/Eject/Touch ID button(depending on your model) should automatically restart your device. Alternatively, hold the power button for 5 seconds to shut down your MacBook Pro, wait 15 seconds and then press the button again to reboot. Fingers crossed.

If you’ve established that the Mac booting black screen issue lies in the display, force restarting the device can be a solution. (if you are not sure, skip this process).

On an Apple-chipped MacBook Pro (M1, M1 Pro, M1 Max) Press and hold the power button for about 10 seconds. You should see the startup options window, which includes a gear icon labelled Options. Select Options and Continue.If the options window doesn"t appeal, release the power button and press and hold it again for another 10 seconds. If you started up from macOS Recovery, you should see a utility window that includes Disk Utility.

On an Intel-chipped MacBook Pro, press and hold the power button for about 10 seconds, then press and release the power button and immediately press and hold Command + R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, it"s time to move on. If this does recovers your screen, it"s worth running Disk Utility to check for errors. If Disk Utility finds errors and repair them, restart your MacBook again afterwards.

Resetting the SMC will dump and reset settings for anything power management related. Itresolves,among other problems with things like heat, sleeping problems, fans, and of course, Mac black screen display issues.

If you Mac boots, the black screen may go away and the MacBook Pro or MacBook Air may go back to normal, however, if it doesn"t, try a keypress sequence to ditch the black screen.

The settings in the PRAM carry forward even if you shut down or restart Mac. If they get corrupted somehow, it can cause problems like the black screen on Mac.

Sometimes the black screen on Mac is as a result of corrupt information on the startup disk. A simple solution for this is to force your Mac to run diagnostics on the disk by booting it in safe mode.

If you run into this unusual issue with your Mac, use one or all of these solutions to sort out the problem. These solutions work for MacBook, MacBook Pro, MacBook Air, iMac, and Mac Mini.

Yes. In most cases, you can fix the MacBook black screen of death using the solutions we"re highlighted in this article. For example, Sometimes the black screen on Mac is as a result of corrupt information on the startup disk. A simple solution for this is to force your Mac to run diagnostics on the disk by booting it in safe mode. Also, If your Mac is on yet the screen stays dark, have a go at pressing the power button once, then press the S key. That is the easy route key to take care of the Mac. Then, hold down the power key until the Mac turns itself off. Stand by 15 seconds and plug it back on.

Here"s what usually happens: Your Mac shows an Apple logo when it finds your startup disk, which is usually the disk built into your Mac, then shows a progress bar as the macOS startup or installation process continues. As the startup continues, you should see a progress bar, with or without the Apple logo. This screen might alternate with a blank screen several times. If you"re installing macOS, the Apple logo or progress bar might persist for much longer than usual. As installation continues, the progress bar might move slowly and pause for long periods. That"s why Apple recommends beginning macOS installation in the evening—so that it can complete overnight if needed.

but sometimes the Mac is stuck on a black screen with the Apple logo could appear. This could be due to incompatible peripherals, power issues, software incompatibility, poor contact between hardware and firmware, viruses (yes, virus), and more. Use the solutions we"ve provided above to fix this issue.

If you have a Mac laptop or iMac with a display that’s been damaged or no longer turns on, but you’re sure the computer is still functioning, a repair may not be required to extract all its data or continue using it.

(In fact, without a paid AppleCare+ for Mac plan, repair costs for a display often far exceed a Mac’s value unless a repair shop can find a refurbished or salvaged display. It may be cheaper or not much more expensive to simply buy a used Mac of the same vintage with a working monitor.)

macOS allows remote screen access via a local network using Bonjour, but only if you enabled Screen Sharing in the Sharing preference pane. If you might have done so, follow these steps:

With Screen Sharing enabled, if you also clicked Computer Settings and enabled a password for VNC viewers, you should also or instead be able to use standard VNC screen-sharing software from any computer on the network (including a Mac), or one that can reach the network remotely.

We’ve compiled a list of the questions we get asked most frequently along with answers and links to columns: read our super FAQ to see if your question is covered. If not, we’re always looking for new problems to solve! Email yours to mac911@macworld.comincluding screen captures as appropriate, and whether you want your full name used. Not every question will be answered, we don’t reply to email, and we cannot provide direct troubleshooting advice.

The Hakusan plant, located in the Ishikawa Prefecture of Japan, is equipped to produce LCD smartphone displays. It has been left idle since July 2019, a casualty of Japan Display"s reported lack of preparation for the iPhone"s shift to OLED.

In March, Japan Display was said to have sold about $200 million worth of LCD manufacturing equipment from the facility to a customer believed to be Apple. Nikkei"s report on Thursday suggests that Japan Display has sold a total of $281 million worth of equipment to that customer.

Sharp, for its part, plans to use the facility to consolidate its production of LCD panels for Apple iPhone while renting the manufacturing equipment from Apple. A Sharp facility in Kameyama, Japan, will reportedly shift to producing panels for customers in areas such as automotive or medical equipment. The facility can produce up to 7 million display panels per month.

If you"ve ever had a flickering MacBook Pro® screen, you know how easily it can ruin your work day or movie night. Fortunately, there are some simple fixes that can help resolve the problem.

At Asurion, when tech breaks, we fix it—whether your MacBook® won"t turn on or it needs a factory reset. We"ll walk you through what to do if your MacBook Pro screen is flickering so you can get back to what"s important.

There are various ways to try to stop your screen from flickering. Our suggestions go from simple to increasingly more complex, so start at the beginning and work your way down the list.

Updating your MacBook Pro to the latest iOS®version can solve all kinds of issues, including a flickering screen. Here"s how to confirm that your laptop is running the latest version of macOS®.Open System Preferences.

We"re all used to staring at a bright white screen, but Dark Mode offers a darker color scheme that"s easier on our eyes. Meanwhile, True Tone technology adjusts the color and intensity of your retina display to match the light around you, so that what you see on your screen appears more natural. Both features can occasionally lead to screen flickering.

Another cause of screen flickering lines on your MacBook Pro? Recently downloaded applications and files, which may have viruses. To erase them from your computer:Go to the dock and click on the Finder.

Many MacBooks come with two graphics systems. They also come with the automatic graphics switching option turned on to enable your computer to use the best one for whatever you"re doing—and to maximize battery life. But sometimes the two graphics systems can cause screen flickering. To turn off the setting:Go to Apple menu>System Preferences>Battery.

If that acronym looks more like a foreign language than a tech term, you"re not alone. NVRAM stands for non-volatile random-access memory, which stores different kinds of data, including your screen resolution, volume preferences, and time zone information. Screen flickering can start when the NVRAM is cluttered or outdated. Here"s how to reset your NVRAM:Shut down your Mac.

Your MacBook Pro"s System Management Controller (SMC) determines how your computer manages power. Much like restarting and updating, resetting the SMC can resolve various glitches, including a flickering screen. There are different ways to reset the SMC, depending on which model you have.

Doing so will help you figure out whether the software that loads as your Mac starts up is causing your screen to flicker. Keep in mind, your screen resolution may be low and your computer may run slowly—that"s normal in Safe Mode. When you"re ready, check our guide to how to start your computer in Safe Mode. If the flickering stops in Safe Mode, turn off your Mac and then turn it back on as usual—you"re good to go.

If you"ve tried the troubleshooting tips above but the screen flickering continues on your MacBook Pro, it"s time to run Apple Diagnostics. It will help figure out if there"s a hardware issue.Shut down your computer.

If you"ve tried these steps and still need a little help, we"re right around the corner. Schedule a repair at the nearest uBreakiFix® by Asurion or Asurion Tech Repair & Solutions™ store and our certified experts can get your device back up and running as soon as the same day.

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.

2.If your existing screen has no backlight issue buying screen will not resolve anything. Please confirm with the order your existing screen does not have backlight issue.

4. Search LED Backlight Strip in market if your existing screen has backlight issue. We don"t carry it. The order is not processed unless requested information has been received.

This is not traditional LCD screen,Not full display assembly. If you are installing in Apple laptop, be noted that Apple has modularized this product. Unlike traditional LED screens , Apple has LED - backlight diodes molded into laptop back bezel instead of display itself. So if your existing display is broken and if you purchase listed product it might solve issue. But if you have back bezel damaged or if your existing LCD has no backlight then this product will not work for you. Whole Display assembly itself is made up of 5 Layers. and this is only one part of it. Even after installing this product if your display does not have backlight then you need to purchase required layers separately. Skill level required to install this display is very high.

After looking at the performance of Apple"s M1 Pro SoC powering the new MacBook Pro 16, and beyond reviewing the laptop itself, there"s another interesting component in this laptop that"s worth looking into, and that"s the mini-LED 120Hz display. So today we"re going to take a closer look at what Apple is doing with their brand new screen.

There are two versions of the new MacBook Pro and we"ve got the 16-inch version, although the 14-inch model"s display is very similar just smaller and with a different resolution. Apple calls this particular display a "Liquid Retina XDR display" which is typical Apple marketing speak. If I translate this into what Apple actually means, they are giving you a high resolution full array local dimming mini-LED LCD with true HDR functionality.

If we dive deeper into the specs, the 16.2-inch panel has a resolution of 3456 x 2234 which continues Apple"s tradition of using non-standard resolutions across their line-up. Apple doesn"t disclose the exact technology used here, but it"s an LCD panel which appears to be IPS-like in design. The backlight has 10,000 mini-LEDs for impressive zone density at this size, allowing for a contrast ratio of 1,000,000:1 and peak brightness up to 1,600 nits in the HDR mode on paper.

The MacBook Pro"s display is a wide gamut display with 99% coverage of the DCI-P3 color space. That"s an excellent result for any creator looking to produce content in that gamut. This also means perfect sRGB coverage, so if you"re designing web content, creating SDR videos, or working with wide gamut HDR videos then Apple is providing you the tools to do that.

Where the MacBook Pro"s display ends up in terms of color gamut is typical for a modern "creator" laptop, the majority of top-end laptop displays have really good coverage of sRGB and P3. Where it falls a little short is in that Adobe RGB coverage, and a competing display like the Samsung OLED you get in devices such as the Gigabyte Aero 15 OLED does offer a wider color gamut with full Adobe RGB coverage. That"s not to say the MacBook Pro"s gamut is bad or anything, it"s just not as wide or as versatile as I"ve seen.

If we look at the options provided in the MacBook Pro"s display settings, you"ll find quite a few options including Apple Display and Apple XDR Display presets, along with a decent array of creator focused modes for gamuts like BT.709, sRGB and P3. Apple also offers True Tone and Night Shift functionality, which some people might find useful but ultimately hurt color accuracy. I"ve disabled True Tone for testing.

When looking at the default Apple Display profile, performance is pretty good by default. When displaying sRGB content in this mode, it"s quite likely color management will activate in the app you"re using to display the content correctly and accurately, instead of oversaturating it up to the full P3 gamut of the screen. When looking at saturation sweeps as an example, we find excellent deltaE performance, and good results in ColorChecker as well, especially around skin tones which are crucial to get right.

Based on this you should probably just leave your MacBook in the Apple Display mode for everyday use as it"s accurate enough for sRGB content and will also let you benefit from wide gamuts where needed. The performance in the Apple Display XDR mode is similar as well for SDR content, so that"s an option if you want to also use HDR at times.

There is a downside to these modes, and that"s locked brightness. Now technically each of these color specifications do stipulate a brightness level for mastering: sRGB is 80 nits, DCI-P3 is 48 nits and Rec. 709 is 100 nits - and the MacBook Pro gets this right.

In the regular Apple Display mode for viewing SDR content, I measured peak brightness at around 520 nits, with a variable black level. Bizarrely, the MacBook Pro appears to change its black level limit in the SDR mode depending on the ambient light conditions, even with True Tone disabled. In a lit room, the black level was capped to 0.02 nits, delivering around a 26,000:1 contrast ratio.

In the HDR mode, brightness is extremely impressive. There"s no major difference between sustained and peak brightness, so there"s no automatic brightness limiter that activates after a short period to dim the screen in intensely bright scenes. Brightness is as high as 1670 nits at small window sizes, and over 1500 nits at 50%, before dropping to around 1150 nits for a full screen sustained white window. That"s impressive, although it does come with a corresponding increase to power consumption, so running the display at over 1000 nits all the time isn"t advisable on battery.

This performance also destroys basically any other LCD based monitor I"ve looked at before. On the standalone monitor side, it"s virtually unheard of right now to see LCD zone counts higher than a couple of thousand. This limits worse case contrast to around 12,000:1 in the case of the 2,000-zone Samsung Odyssey Neo G9 with VA technology, or just 4,000:1 in a checkerboard test.

Apple choosing to use 5-10x the zone count massively improves the achievable contrast ratio in tricky situations and I"d say this amount of zones - and the density of zones - is what is required as a minimum for the best HDR experience with an LCD panel. Even Apple"s own ridiculously overpriced Pro Display XDR doesn"t compare as it has a paltry 576-zone backlight and it was criticized at launch for poor blooming compared to professional level HDR mastering displays. The MacBook Pro"s display will be far better for producing HDR content, aside from the small size.

So from one perspective it"s easily one of the best LCD-based HDR experiences I"ve seen, but on the other hand it isn"t a self-lit panel like an OLED which is completely free of blooming and in some situations OLED still delivers better HDR. Of course, OLEDs have other drawbacks such as lower brightness levels and the risk of burn in so I can understand why Apple would opt for LCD instead. Besides this one complaint though the HDR experience is excellent, especially for a laptop.

Unfortunately there is a major drawback to the Liquid Retina XDR display used on the new MacBook Pros, and that"s the motion performance. While it"s nice to see Apple upgrade the refresh rate to 120Hz compared to the 60Hz they were using previously, the display being used here doesn"t have the appropriate level of response times to keep up with that 120Hz refresh rate. The panel is actually very, very slow, which is a disappointment.

In a full black to full white transition, gamma corrected as per our current test methodology, the MacBook Pro"s display is exceptionally slow, taking nearly 100ms to complete this rise. Even if we apply exceptionally generous tolerances and only measure 60% of the total transition time, it still takes 39ms to transition, which is one of the worst results I"ve ever measured.

This is exacerbated by using a combination of IPS-like LCD technology, and an always-active mini-LED backlight, noting that both the LCD layer and mini-LED need to change to transition fully.

Luckily full transition fall times aren"t as horrific, though still reasonably poor at over 15ms even with our very generous 20% tolerance. The real transition time is more like 35ms, so less than half that of the rise time, but far slower than most other LCDs out there. The best laptop grade OLED panels can perform these transitions in under 2ms with the same test conditions, making them an order of magnitude faster.

I tested a few more transitions of varying degrees and typically the MacBook Pro would fall between 20 and 40ms, though luckily there is no overshoot to speak of. When viewing UFO test results, you can see the product of these horrific response times: a substantial blur trail behind moving objects. Even though the panel can feel somewhat smooth to use because it has a moderate refresh rate of 120Hz, the actual clarity in motion is terrible and this impacts the usefulness of the higher refresh rate.

Right next the MacBook Pro we have the Aero 15 OLED"s panel which has half the refresh rate at just 60Hz, but massively faster response times. You"ll see here that even though the MacBook Pro"s display is twice as fast in refresh rate, the extremely slow response behavior limits motion clarity to more like a 60Hz monitor or worse. The level of smearing is insane and I"m not sure how a modern LCD could end up this slow, Apple really should have experimented with some sort of overdrive.

Now, all Apple fans are probably sitting here annoyed that I"m criticizing the display for motion performance because the MacBook Pro isn"t a gaming laptop. And they"re right, it"s not a gaming laptop. But motion performance is relevant beyond gaming, it impacts things as basic as scrolling through websites or even watching videos. Fast moving video content like sports is affected due to slow transition times, and scrolling through text can show really bad ghosting trails, especially with white text on a black background. But really anything on this display that moves, especially stuff that moves fast, can quickly become a blur fest.

There is no doubt that the MacBook Pro"s Liquid Retina XDR display is excellent for content creation. It has perfect P3 color gamut coverage and outstanding factory calibration, with particular attention to detail paid to multiple color specifications for mastering.

The Liquid Retina XDR display has impressive HDR specifications and performance. A mini-LED backlight zone count of 10,000 is the star of the show in this respect, significantly reducing blooming compared to other LCD-based HDR monitors, and providing exceptionally high brightness. The level of performance is good enough for both enthusiast level mastering and HDR playback, so the MacBook Pro is a great device for video editing on the go when you also factor in its overall performance.

A few nitpicks aside, the major downside to the display is motion performance. This display is exceptionally slow even for an LCD, despite packing a 120Hz refresh rate. This affects areas including web browsing and any work with text as you scroll through content, and blur trails can be visible across a wide range of use cases, not just gaming. It"s not bad enough to negate the benefits you get elsewhere, but Apple needs to put a lot of work into optimizing how quickly their panels transition. I also feel the lack of HDMI 2.1 on the MacBook Pro is a bit puzzling, going HDMI 2.0 for external monitors (in addition to Thunderbolt) is a bit annoying.

Now comes the ultimate question: is this the best laptop display ever, as Apple claims it is? That will depend on your perspective. Evidently, if you"re buying a high-performance laptop for gaming then no, but the MacBook Pro is clearly not suited nor aimed at gamers. But if we put that aside and ask about the best display for content creation and productivity, we think Apple has a solid claim to that throne.

The only real competition right now are OLED panels, which come with their own set of strengths and weaknesses. There are a few other mini-LED laptop options on the Windows side, like the screen you get in the Acer Predator Helios 500, but that display only has 512 zones, not the 10,000 on offer here. So it"s a battle between the MacBook and the OLEDs you see in products like the Gigabyte Aero 15 OLED.

The reasons to get an OLED display over this LCD would be in terms of its self-lit pure HDR experience with zero blooming, significantly faster response times for better motion clarity, and wider color gamut allowing for accurate work in the Adobe RGB color space as well as P3 and Rec.709. However, the drawbacks are also significant, including a 60Hz refresh rate limitation with current 4K offerings, the risk of permanent burn in, and significantly lower brightness. Actual implementations we"ve seen also lack the calibration Apple is offering.

On the balance of things, I"d prefer to get the Liquid Retina XDR in the new MacBook Pro than an OLED, especially for color-accurate content creation, and the HDR experience is close enough to OLED that I can forgive very minor blooming on occasion. I wouldn"t say Apple is miles in front with this screen, but it"s certainly very impressive and calling it the best display for production work is justified.

A few MacBook users have reported a potentially serious issue with Apple’s M1 MacBooks. Stories of cracked LCD screens on Apple’s M1 MacBook Air and M1 MacBook Pro, which launched in November 2020, have appeared in several places online.

Discussion threads about this problem popped up back in July 2021 on Apple’s Support Community and Reddit, with multiple users reporting similar incidents. These people opened up their laptop lids to find a cracked screen, black lines, and discoloration. The reason for the MacBook cracked screens still isn’t clear, with these folks reporting normal routine usage and no external damage whatsoever.

“I bought a MacBook Air M1 6 months ago and the screen cracked for no apparent reason. I left my computer on the top of my desk during the night and the next day I opened it the screen had two small cracks on the right which damaged the functioning of the screen. I contacted an authorized Apple center which told me Apple warranty would not cover it as it is a contact point crack; as if I have left something the size of a rice berry between the screen and the keyboard. It is absurd as I have nothing like it on my desk and the computer was properly closed as usual and didn’t move the whole night.”

Based on these reports, there is no single apparent cause for the cracks. Users have reported no external damage, pressure, or force applied to their device. A probable cause for the cracks could be debris present between the screen and Mac’s body while the screen was shut. This could have caused the crack in the screen, especially if the owner forcefully shut the laptop lid.

A cracked screen from debris is always a possibility with laptops, given their portable nature. However, it seems that the exact culprit is too small for affected users to have seen or noticed. This seems plausible since Apple has previously warned MacBook owners not to attach webcam covers to their laptops—since the cover creates an additional gap between the screen and the body, it may cause cracks.

Another speculation on the cause of the cracks is the frame of the MacBook. It is possible that the frame holding the screen is too weak to properly safeguard it from the torque force experienced when it’s closed or carried around.

However, we think this is unlikely, as the design of the current M1 MacBook Air and Pro is the same as the previous generation. We haven’t seen any widespread complaints of any screen-cracking issues in that generation, so the chance of it only happening on the new model is low.

Unless the damage is minor, a cracked screen will likely result in a dead screen, rendering your device unusable. As such, you’ll want to get it repaired quickly. Your best bet is to go to an Apple Store or Apple Authorized Repair Center for a MacBook screen replacement or device replacement.

Some people have gotten lucky and were offered a free repair or replacement of their system. However, Apple support has told most victims of this issue that they are responsible, so the damage is not covered by the machine’s warranty. Charges vary between $400 and $800 for a new LCD panel installation.

If your Mac is covered under AppleCare+, the cost should be substantially less. A cracked screen with AppleCare+ currently costs $99 to repair. AppleCare also covers two incidents of accidental damage, which should include this specific issue.

AppleCare+ extends the included coverage to three years from one year, though you can also add onto your AppleCare+ coverage if needed. It includes two physical damage repairs every 12 months, with an additional charge of $99 for replacing the screen or outside the laptop.

AppleCare+ currently costs $199 for the M1 MacBook Air and $249 for the M1 MacBook Pro M1. If you compare this to your initial investment of at least $1,000 (depending on which MacBook you’ve purchased), it’s not too bad. In addition, this plan can save money in the long run if you’re particularly accident-prone. We would recommend purchasing protection if it fits your budget, especially if you can’t afford to pay for repairs.

Apple hasn’t released an official statement on the matter, nor has it introduced a repair or replacement program for affected Macs. Hopefully, Apple will soon acknowledge the issue and the cause behind it, along with a cheaper repair program for users affected by the random screen cracks. It’s already possible to see if your Mac has been recalled for some reason, which includes special cases like this.

Bursor & Fisher regarding the M1 MacBook cracked screens. Currently, Apple hasn’t posted any specific guidance on the issue, but that might change with the outcome of this lawsuit.

It’s a smart idea to keep your device clean and free of dust. Dust that accumulates on or in your MacBook can cause various issues, such as unexpected shutdowns, excessive fan noise, poor performance, and more. Thus, keeping your device clean and free from dust is vital to it running properly.

See how to remove dust from your MacBook or iMac for a guide on keeping your device clean. Otherwise, you should always avoid putting anything on your laptop’s keyboard, such as coins or your keys. It’s all too easy to slam your laptop’s screen and forget that something was under it.

An unknown issue is causing M1 MacBook screens to crack and, currently, there is no known fix apart from getting the screen replaced. If you happen to face the issue, your best bet is to take your system to an Apple Store and get it fixed. We hope Apple will publicly address the issue soon.

A black screen on MacBook Pro can be terrifying, and if it ever happens, it tends to be at worst time. We consider Apple MacBooks to be among the best laptops for creatives, and part of the reason for that is that we find them to be so reliable. But like with any laptop or desktop computer, sometimes problems can occur.

MacBook Pro black screens can occur in several forms, and it"s not necessarily a cause for concern. You"ll normally see a black screen on MacBook Pro (or a grey or blue screen) at least once during startup, and sometimes the process can take longer than others, especially if it"s been a while since you"ve used your device. If you"ve waited, and you"re still seeing a MacBook Pro black screen after a few minutes, it"s time to try to a few things that might solve the issue.

Before you start wondering how much it might cost to fix, take a breath and try working through the steps below before you visit your nearest Apple Authorised Service Provider or store. Many of our writers and creative contributors use MacBooks for their daily work, so a black screen on MacBook Pro is an issue we"ve come across in the office more than a few times. Below, are the steps that we go through to try to solve the problem, whether it involves the laptop"s own screen or an external display.

Speaking of external displays, if you"re looking to expand your screen space, see our choice of the best monitors for MacBook Pro or the best 4K monitors. And If you"re looking to upgrade your laptop, see our pick of the best MacBook Pro deals.

Whether your using an older Intel MacBook or a brand new M2 MacBook Pro, any number of issues can cause a MacBook Pro black screen. Sometimes it can happen waking your laptop from sleep, and sometimes it can be caused by broke disk permissions or a software error. Below we"ll outline the steps to try if the problem is a black, or otherwise blank screen, on your MacBook Pro"s own display. If your problem is with an external monitor, skip to how to fix a black screen on a MacBook Pro external monitor.

This might seem obvious and you"ve probably already done it, but just to be sure, do check the power and brightness controls. It can be a massive relief to discover the issue is something as simple as this. If you"re running on battery, connect your laptop to its charger just in case the battery has run down. Check the power indicator light shows so you can rule out a faulty power cable. It’s also possible that you (or your cat) might have unintentionally hit the brightness keys on the keyboard at some point at that you screen is simply dimmed. Hit F2 or use the control bar to try increasing the brightness on your MacBook Pro.

Peripheral devices like printers, keyboards, external drives, mice and trackpads can all cause potential start up problems. If you definitely have power, but your MacBook isn"t starting up, make sure it"s disconnected from anything other than your charging cable and adapter.

Once you"ve confirmed that the laptop is receiving power and you"ve ruled out the possibility of interference from peripheral devices, the next thing to try is a simple restart. Pressing Control + Command (the symbol with four loops) + Power/Eject/Touch ID button(depending on your model) should automatically restart your device. Alternatively, hold the power button for 5 seconds to shut down your MacBook Pro, wait 15 seconds and then press the button again to reboot. Fingers crossed.

Still no luck? Then try a forced reset and then start up from macOS Recovery. Sometimes a good old-fashioned hard restart is all it takes to fix all kinds of MacBook issues. On an Apple-chipped MacBook Pro (from the M1 MacBook Pro 13 to the new 2023 M2 Pro and M2 Max models), press and hold the power button for about 10 seconds.

On an older Intel-chipped MacBook Pro, press and hold the power button for about 10 seconds, then press and release the power button and immediately press and hold Command + R until you see an Apple logo or other image. If you still see a blank screen after about 20 seconds, it"s time to move on.

In both cases, if this recovers your screen, it"s worth running Disk Utility to check for errors. If Disk Utility finds errors and repair them, restart your MacBook again afterwards. If it finds no errors, Apple recommends reinstalling macOS(opens in new tab).

This isn"t official from Apple, but years of MacBook lore claim that a particular key sequence can sometimes revive a non-reacting blank MacBook Pro screen. Press power button once, Press "S" (the sleep hotkey), and then hold the power button to perform a hard shut down. Wait 15 seconds and press the button to restart. We have no idea why this works, but plenty of people have vouched for it.

MacBook Pro Safe Mode allows you to start you MacBook without other launch agents booting up. This can eliminate the potential for issues with other apps and services interfering and preventing your screen from displaying correctly.

To boot into Safe Mode, power off and let your MacBook Pro sit for 20 seconds. Turn it on again and immediately hold down the Shiftkey. Release the Shift key when the login window appears. You should see "Safe Boot" in the upper right corner of the window. Sometimes you may be asked to login twice, and your computer may take a longer than usual to start while it carries out diagnostics. After it"s completely booted up, you can restart again in normal startup and see if the black screen is fixed.

If that doesn"t work, it"s time to start turning to more technical solutions. NVRAM (non-volatile random-access memory) and PRAM (Parameter RAM) are small memory partitions that store settings like volume control and display resolution. Sometimes they encounter issues and require resetting. To do that, power down then hit the power button again to boot up you MacBook. Immediately hold down Option + Command + P + R at the same time while the machine boots, and keep holding them down until you hear the startup chime (around 2 seconds)

The Mac"s Systems Management Controller (SMC) controls things like temperature, keyboard, display and fans. Resetting the SMC is another possible quick fix to resolve a black screen on MacBook Pro. Turn of your MacBook and unplug it for at least 15 seconds before plugging in again. Then, with the power still off, hold down Shift + Option + Control + the power button all together. Release the keys when your MacBook starts booting up.

The steps above should help you resolve a MacBook Pro black screen, but if your laptop"s own screen is working but an external monitor is blank, there are other things to try.

It may seem obvious, but first check the power on your external monitor and then check you connections. Most MacBook Pros only offer Thunderbolt/USB-C connectors for external monitors, so if you"re using a monitor with a different connection, you"ll need to check your adapter or dock too. If you find that the external display doesn"t turn on after you connect it, try connecting your display while your MacBook is turned off, and then switch your MacBook on.

The black screen on a MacBook Pro external monitor may be caused by simply closing your laptop. By default, this automatically puts your MacBook Pro to sleep. If you want to be able to close the lid of your MacBook Pro but still use the laptop via an external monitor, you"ll need to change some settings. Go to System Preferences > Battery > Energy Saver > Power Adapter, and move the slider to Never. Note that you"ll also need to have a keyboard and either a mouse or trackpad connected to your MacBook Pro or it will still sleep on closing the lid.

If the external monitor display is still blank go to System Preferences > Displays. You can press the Alt/option key to bring up the "Detect Displays" button. Click on "Detect Displays", to prompt your MacBook Pro to recognise the external monitor. See our guide to how to connect a monitor to MacBook Pro for more details on using an external monitor and see our guide to the best dock for MacBook Pro to expand your connection options.

In the above we"ve dealt with how to fix a MacBook Pro black screen when the screen is showing nothing at all. There are other issues that can occur, for example, the screen may flash a question mark, a circle with a line through it or something else. These are all signs that your MacBook it powering on but isn"t starting up:

A circle with a line through it: this means that your startup disk contains a Mac operating system but you"re not able to use it. Apple recommends that you press and hold the power button on your Mac for up to 10 seconds until your device turns off and then use Disk Utility to repair your startup disk (see above).

A folder with a flashing question mark: this means that your startup disk is no longer available or doesn"t contain a working Mac operating system. Apple recommends that if the question mark is persistent and your Mac isn"t starting up, again try pressing and holding the power button for up to 10 seconds until your Mac turns off and then using Disk Utility to repair your startup disk. If it doesn"t find any errors, you may have no option but to reinstall macOS.

Apple logo and progress bar: If the startup process stalls on the Apple logo or progress bar, press and hold the power button for up to 10 seconds until your Mac turns off, and then turn it back on. If the issue continues, turn it off again and unplug all non-essential accessories. If that doesn"t work, try repairing the disk using Disk Utility or reinstalling MascOS from MacOS Recovery.